Used Grid Frame for sale (9,708)

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, conveyor belt length: 3,400 mm, conveyor belt width: 400 mm, total length: 3,400 mm, total width: 500 mm, overall weight: 80 kg, power: 0.37 kW (0.50 HP), input frequency: 50 Hz, Equipment: type plate available, Aluminum frame conveyor belt 540x3400mm with new belt for sale Length: 3400 mm Belt width: 440 mm Full frame width: 540 mm Belt top plane (height): 1060mm geared electric motor 0.25kw 230/400v Belt speed: 4m/min Dsdpoyaquqjfx Afnskh Used conveyor belt, conveyor belt with new belt for sale from stock.

Year of construction: 2003, condition: used, frame hydraulic press WEGOMA Workspace: width 3600 mm height 2500 mm the amount of lateral hydraulic cylinders 3 pieces top two pieces beam mechanically Move Dsdpecmat Ujfx Afnskh Mechanical compression setting more photos an questions

Condition: new, conveyor belt length: 22,000 mm, conveyor belt width: 3,750 mm, overall weight: 800 kg, The flat spiral belt with S-hook is a woven belts consisting of left and right spirals which are twined together by means of straight cross rods. The spirals are attached under post-tension, whereby a very dense belt surface is created. The cross rods at the end are bended in the direction of the previous cross rod. The cross rod is then bended around the previous cross rod. Weight 800kg Width 3.75m Diameter of chains 1.2mm The flat spiral belts with S-sides are practically familiar with a restricted amount of applications. This however doesn’t mean that the belt type can’t be used for other applications: Dkjdpfx Ajtp S E Eofnoh – Oven belts in bread & pastry in industry – A special version of the above mentioned is with duplex chains at the sides – Belts in tunnels serving high temperature treatment processes such as tempering, harden, sintering, hard soldering, etc.

Condition: like new (used), NNP Pneumatic grid cutter Dkodpfx Ajhpqwhefneh Stainless pneumatic cutter, ideal for fruit and veg, mobile frame

Condition: ready for operation (used), total height: 2,200 mm, total width: 1,000 mm, total length: 2,500 mm, passage width: 1,570 mm, power: 11 kW (14.96 HP), empty load weight: 2,100 kg, load capacity: 200,000 kg, movable cilinder Max ram adjustment: 300 mm Drawningspeed: 9 mm/sec Dkjdsygyxljpfx Afnjh Workingspeed: 5 mm/sec Returningspeed: 10 mm/sec Max distance between table - ram: 760 mm Dimensions of the table: 1570 x 490 mm

Condition: ready for operation (used), total height: 2,110 mm, total width: 2,240 mm, total length: 900 mm, passage width: 1,500 mm, power: 2.2 kW (2.99 HP), empty load weight: 1,250 kg, load capacity: 125,000 kg, width of table: 420 mm movable cylinder electro hydraulic two speed: fast slow Max ram adjustment: 400 mm Drawningspeed: fast 9mm/sec - slow 2,5 mm/sec Returningspeed: 12 mm/sec Dkedpfx Aoygyyiefnjh Max distance between table - ram: 925 mm Courant needed: 380/400V

Condition: ready for operation (used), passage width: 1,100 mm, power: 55 kW (74.78 HP), empty load weight: 26,000 kg, CNC Hydraulic deepdraw- transfer press line !! 4 dies available: 2 in use 2 reserve !! Equipped with HMS doublehead decoiler and HMS straightener HMS Straightener RS 87-03/0 max bandwidth: 300 mm 7 straightening rolls at Ø 80 mm 2 (pneumatic) drawing rolls atØ 120 mm speed: 2-10m/min Dsdpfx Afsygyy Asnjkh bandthicnkess: 0,8 - 3 mm HMS decoilerBA 3.3-03/040 max bandwidth: 300 mm max coilweight: 4 ton inner coildia:Ø508 mm outer coildia:Ø 1500 mm hydraulic system: 2,2kW - 100 bar - 11l/min Automatic CNC Feeder (HMS PSV-3-S0) Automatic toolchangingsystem Stroke in table: 150 mm Stroke in cushion: 100 mm Capacity: 200 Ton Max ram adjustment: 400 mm Command (feet/Double hand): CNC Max distance between table - ram: 1000 mm Dimensions of the table: 1000 x 1000 mm dimensions stamp: 1000 x 1000 mm Max counter-pression table: 35 Ton Max counter-pression ram: 2 x 1 Ton

Condition: ready for operation (used), power: 14 kW (19.03 HP), load capacity: 250,000 kg, Vapo 250 ton Djdpoygyxrofx Afnekh Max ram adjustment: 300 mm Max distance between table - ram: 700 mm Dimensions of the table: 600 x 600 mm

Condition: ready for operation (used), load capacity: 200,000 kg, Type 2H5 blank holder pressure: 80 ton blank holder stroke: 300 mm Max ram adjustment: 720 mm Drawningspeed: 300 mm/sec Workingspeed: 15>39 mm/sec Returningspeed: 200 mm/sec Max distance between table - ram: 1200 mm Dimensions of the table: 1500 x 1200 mm Max counter-pression table: 80 ton Dodpfjygyxxex Afnjkh Adjustable ram / counter-pression: 300 mm Electric motor (power): 50 hp

Condition: ready for operation (used), power: 36 kW (48.95 HP), empty load weight: 17,000 kg, load capacity: 160,000 kg, ZE 160/200-10 Max ram adjustment: 600 mm Djdpfx Afjygyx Eonekh Max distance between table - ram: 900 mm Dimensions of the table: 1056 x 1000 mm Max counter-pression table: 100 ton

Condition: ready for operation (used), total width: 1,900 mm, total length: 3,200 mm, empty load weight: 42,000 kg, Soenen dieptrekpers 400 ton Capacity: 400 Ton Max ram adjustment: 850 mm Drawningspeed: 300 mm/sec Workingspeed: 20 mm/sec Returningspeed: 300 mm/sec Max distance between table - ram: 1400 mm Dksdoygyypopfx Afnsh Dimensions of the table: 2200 x 1100 mm Max counter-pression table: 160 Ton Adjustable ram / counter-pression: 350 mm Electric motor (power): 125 CV Height: 5800 + 1800 mm

Condition: excellent (used), The Rational CombiMaster Plus CM 61 is a premium electric combi oven built for professional kitchens demanding performance, precision, and durability. Renowned for its reliability and control. This unit delivers consistent cooking results across steaming, roasting, baking, and combination modes, all within a compact and efficient footprint. Key Features Manufacturer: Rational Model: CombiMaster Plus CM 61 Type: 6-Grid Electric Combi Oven Capacity: 6 × 1/1 GN trays Construction: Full stainless-steel body and chamber Control type: Manual rotary dials with digital temperature and timer displays Cooking modes: Steaming (30°C – 130°C) Convection (30°C – 300°C) Combination (steam + convection) Integrated core temperature probe for accurate cooking control Automatic cleaning and rinse system Double-glazed door with heat-reflective glass for energy efficiency Integrated drain and water inlet system Mounted on stainless-steel Rational stand with GN tray runners Specifications Dedpfjxph H Ujx Afnokh Power: Electric, 3-phase Tray capacity: 6 × 1/1 GN Temperature range: 30°C – 300°C Oven dimensions Height: 780 mm Width: 900 mm Depth: 770 mm Stand dimensions H: 700 mm W: 335 mm D: 285 mm Condition Used – good condition Fully tested and operational Clean stainless-steel finish inside and out Supplied with matching Rational stand Item does not come with documentation for sale within EU.

Condition: used, Year of construction: 2017, functionality: unexamined, Used HEGLA Glass Packlifter & Sheet lifter with frame – Sold as Seen Offered for sale is a used HEGLA glass transport and handling system, comprising steel support frames, vertical transport racks, safety guarding, and an integrated access platform with stairway. Manufactured by HEGLA Maschinenbau GmbH & Co. KG (Germany), this robust industrial system is designed for the safe unloading of packs, and handling of large glass sheets within a production environment. Key details  Dedpox Tpg Hefx Afnokh Manufacturer: HEGLA Maschinenbau GmbH & Co. KG Type: Transporteinrichtung (Transport System) Year of manufacture: 2017 Load capacity: 3,000 kg Max load height: 2,550 mm Approx. machine weight: 940 kg CE marked Construction & features: Heavy-duty steel frame construction Multiple vertical glass support racks with rubber contact pads Integrated safety fencing and guarding Access platform with industrial steel staircase and handrails Overhead beam structure suitable for handling integration Floor-mounted and free-standing sections Condition: Used, with visible cosmetic wear including paint chips and surface marks consistent with normal industrial use Structurally complete and previously operational at time of decommissioning No testing carried out since removal Sale terms: Sold as seen No warranty given or implied Buyer responsible for inspection, loading, and transport Power, controls, and ancillary equipment only included where visible in photos

Condition: excellent (used), Year of construction: 1998, Frame Dowel and Slot Mortising Machine by Hofmann HT 200 U with Angle Adjustment Specialized drilling machine for stair construction, window manufacturing, and universal use thanks to pneumatic height adjustment. Angled doweling and drilling for balusters are easily accomplished with the swiveling drilling unit. - Motor with pole switching, two speeds - Motor power 1.5 / 1.8 kW, 1400 / 2800 rpm - Motor started via practical handle switch - Precision chuck with two inserts: 16mm and M10 thread - Table size approx. 1100 x 240 mm - Linear laser for precise workpiece positioning - Drilling unit swivels 65° to both left and right - Pneumatic adjustment of working height allows doweling on two levels without setup changes - Desired drilling heights for each level can be set using handwheel and digital counter; switching between levels is pneumatic from the front - Cross adjustment approx. 320 mm, stepless or in 12 mm increments - Drilling stroke approx. 200 mm Dkjdpfsyfta Tjx Afnsh - 2 pneumatic workpiece clamps, mountable at front and rear of the table - 2 swiveling workpiece supports - 2 side fences, also usable as front supports - Mobility kit - Extraction connector 80 mm - 4 used but good drill bits: 9, 12, 16, 19 mm Few touched-up paint spots, excellent condition—see original photos. A used swiveling slot mortising machine in this condition is rarely available. CE marking Operating manual Dimensions approx. 1200 x 1200 x 1200 mm (LxWxH), weight 310 kg. The machine can be demonstrated at our premises by prior arrangement. We only offer machines that are ready for demonstration in our warehouse—see "more offers from this dealer."

Condition: good (used), Year of construction: 1998, Universally applicable frame dowel and slot drilling machine with angle adjustment Especially designed for stair construction, window manufacturing, and versatile applications thanks to pneumatic height adjustment. Angled dowelling and spindle drillings, such as for balusters, can be easily accomplished with the swiveling drilling unit. Motor with pole switching, two speeds Motor power: 1.0 / 1.5 kW, 1400 and 2800 rpm Motor start via convenient handle switch Equipped with Röhm two-jaw chuck, 1 - 20 mm Linear laser for precise workpiece positioning Drilling unit can swivel 65 degrees left and right Pneumatic adjustment of working height allows dowelling on two levels without repositioning. Desired drilling heights can be set for each drilling level via digital counter, switching between levels is pneumatic and operated from the front Cross adjustment 340 mm, infinitely variable or in 12 mm increments via indexing rail Pneumatic clamping possible at any point, operated from the front Maximum height adjustment approx. 100 mm above table height Drilling stroke approx. 200 mm 2 pneumatic workpiece clamps, 1 clamping column repositionable to the front 2 swiveling workpiece supports Extraction funnel Central stop + 1 side stop Fixed mitre stop Dkjdpfsxmatnex Afneh Length stop as round rod Assorted drill bits Operating manual CE mark Machine was partly repainted due to paint splashes. Pneumatic hoses replaced Dimensions: approx. 1200 x 1350 x 1600 mm (LxWxH), weight 380 kg. The machine can be viewed and demonstrated at our premises by appointment. We only offer machines that are ready for demonstration in our warehouse, see "more offers from this seller."

Condition: excellent (used), Year of construction: 1986, Frame press T2 RP year of construction 1986, 2,2 kw Ele..-Hydraulic 3 press cylinders vertical, 2 horizontal Adjustable pressing pressure 0 - 2000 kg 2500 x 3000 mm pressing size Space requirement 4000 x 950 x 2600 mm Dkodju Rp Eispfx Afnjh

Condition: ready for operation (used), 6-kolomspers met 4 hydraulische zuigers opwaartse slag diameter van de zuiger: 450 mm slag: 550 mm Maximale kracht van 2000 ton max opening zonder verwarmde tafels: 780 mm max opening met verwarmde tafels: 655 mm Verwarmde tafels met stoom of olie Maximale temperatuur: 300° C Totale oppervlakte: 2000 x 2000 mm Twee tafels van 2000 x 1000 mm (kunnen samen of apart gebruikt worden) 2x 11 kW hydraulisch vermogen met invoerroltafel: 4260 x 1550 x 1250 mm Olietank op platform: 2000 x 2000 x 2500 mm Totale hoogte van de pers: 3600 mm Dodpfxjv Rwftj Afnjkh De pers zit 920 mm in de grond Werkhoogte is 750 mm Toepassingen: - composietmateriaal - vulkaniseren - buigen / strekken

Condition: as good as new (ex-display), Lorch Handy TIG 180 DC ControlPro 230 V Lorch Weld Back Pack Carrying Frame – portable electrode inverter welder with top-class welding characteristics, ideal for assembly, construction sites, or workshops. Fastpulse up to 2 kHz for thin stainless steel sheets and pipes. HF ignition, 2/4-stroke operation, fast tack welding. Current reduction prevents burn-through when overheating, Hotstart ensures perfect ignition, Anti-Stick system prevents electrode from sticking, storage for 4 jobs. Technical specifications: Mains voltage: single-phase 230 V, 50 Hz; TIG current range: 3 - 180 amps; Electrode range: 150 amps. Duty cycle TIG: 180 amps at 30% duty cycle (40°C), 150 amps at 60%. Electrode: 140 amps at 60% duty cycle. Protection class: IP 23; Approval: S-mark; Weight: approx. 6.5 kg. Scope of delivery: cable, gas hose, and operating manual, without accessories. Dedpeyhpmhefx Afnokh

Condition: good (used), Technical data for the workbench frame: Manufacturer: Jung Heinrich Dkjdpordy Ivsfx Afnsh Type: T The scope of delivery includes: 02x workbench stand, used Material color: blue Stand height: approx. 910 mm Stand depth: approx. 1,050 mm Incl. cross and diagonal struts, foot plates The stands are pre-assembled ( welded framework ) 04x workbench crossbars, used Material color: orange Box profile: 120 x 50 mm Truss type: HN 120|20 clear width: 2,700 mm 08x locking pins, used Version: sendzimir galvanized For securing the longitudinal beams against unintentional lifting out The pictures serve to illustrate the material. The material color may vary. The workbench racks are commissioned in an assembled state; The workbench stands are pre-assembled; The production time is usually approx. 3 - 5 working days. Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: used, Technical data for the frame profile: Shelving system: Bito Type: PL 38 The scope of delivery includes: 01x frame profile, used Dodpfx Ajufw Acsfnskh Material color: sendzimir galvanized Frame profile: P 20 Profile dimensions: 90 x 65 x 2.0 mm Frame height: 2,475 mm Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any additional transportation or shipment of this item is associated with additional additional costs, which can be requested separately depending on the or scope of delivery can be requested from us.

Condition: good (used), Technical data for the pallet rack upright: Shelf system: Hovuma The scope of delivery includes: 01x pallet rack upright, used Material color: cream white profile dim.: 85 x 50 x 17 x 3.0 mm Profile type: C 808 S275 Incl. cross and diagonal braces, Base plates Dedpfx Ajkwdd Ejfnokh The stands are pre-assembled ( welded truss ) 6.640 mm high 870 mm deep

Condition: good (used), Included in the scope of delivery: Dkodpsw Rvtasfx Afnjh 01x Stackable wire mesh frame, used Total weight: 27.23 kg Color: blue Total width: approx. 600 mm Total depth: approx. 800 mm Total height: approx. 950 mm Usable height: approx. 800 mm Opening size: approx. 550 x 520 mm (W x H) Mesh size: approx. 50 x 50 mm Wire thickness: approx. 3.00 mm Tube profile: approx. 22 mm Consisting of 2 foldable side panels! 01x One-way pallet, used Total width: approx. 600 mm Total depth: approx. 800 mm Height: approx. 150 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any requested transport or shipping of this item will incur additional costs, which can be quoted separately depending on the delivery location and scope.

Condition: good (used), Technical data for the frame profile: Racking system: SSI Schäfer Type: PR 600 Scope of delivery includes: 01x frame profile, new Material color: Sendzimir galvanized Frame type: P73 Dksdpfx Afex Dil Ujneh Profile dimension: 75 x 75 x 2.0 mm Height: 10,694 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about this item: This item is only available for collection. Any additional transport or shipping of this item will incur extra costs, which can be requested from us depending on the place of delivery or the scope of delivery.

Condition: good (used), Included in delivery: 01x stand protector, used Material color: yellow total height: approx. 970 mm total width: approx. 140 mm inner width (incl. foam): approx. 93 mm inside width (without foam): approx. 134 mm total depth: approx. 60 mm Material thickness: approx. 3.00 mm Hole diameter: approx. 11 mm Hole grid (HxW): approx. 700 x 50 mm Unit weight: approx. 5.87 kg - without fixing material Dkedpfx Ajikvktjfnjh

Condition: good (used), We offer you here a used pallet rack stand of the manufacturer Mic Spica for sale. Technical data of the pallet rack stand: Shelf system: Mic Spica Included in delivery: 01x pallet rack upright, used material colour: cream white Frame profile: 80 x 70 mm Incl. cross and diagonal braces, base plates The uprights are pre-assembled Dksdpfx Aegzg Skjfnoh ( screwed framework ) 2.780 mm high 1.000 mm deep