Used Four-Side Planing Machine for sale (99,058)

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 3 h, Automatic shrink wrapping machine with continuous side sealing with tunnel Ihjdpfovr E Aiox Ag Uot

Condition: used, Year of construction: 1992, Used machine Year of manufacture: 1992 Technical specifications: Length of jointer table: 2100 mm Diameter of tool spindle: 30 mm Diameter of planer heads: 100 mm Iodpfxsxgkf Uo Ag Usht Planer spindle speed: 6000 rpm Working width: 30 - 180 mm Working height: 6 - 120 mm With an optionally available smaller planer head for the left spindle plus narrower feed rollers, a minimum width of 15 mm can be achieved Motor power bottom, left, right: each 3.7 kW Motor power top (thickness spindle): 5.5 kW Feed speed: 6 and 12 m/min Electric height adjustment With 1/10 increment control Including step-controlled feed roller Including planer heads Extraction ports: 160/120/120/140 mm Availability: short-term Storage location: Flörsheim

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: AA2/004283, working width: 240 mm, TECHNICAL DETAILS Max. planing width: 240 mm Planer block diameter: 120 mm Number of knives: 4 Ihedpfx Agewkq Ndj Uet Electrical data Voltage: 400 V Connected load: 10 kVA General information Year of manufacture: 2017 Weight: 3,350 kg EQUIPMENT - Documentation available - CE marking present

Condition: ready for operation (used), Year of construction: 2020, Longitudinal sealing: continuous, photo cells: horizontal/vertical, working height range: 760mm-960mm, max. transport speed: 30m/min, film core diameter: 76mm, max. film roll diameter: 350mm, max. film roll width: 650mm, sealing stamp width: 300mm, product width range: 50mm-410mm, product height range: 1mm-250mm, min. product length: 50mm, film thickness range: 7µm-80µm, max. output rate: 85cycles/min, materials: POF/PE/PVC/PLA/bio films. Machine dimensions X/Y/Z: approx. 2200mm/1700mm/1800mm, weight: approx. 800kg. Documentation available. An on-site inspection is possible. Isdpfx Aoxuvnqog Uoht

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 2,474 h, load capacity: 3,000 kg, lifting height: 5,000 mm, fuel type: electric, mast type: triplex, construction height: 2,500 mm, drive type: Elektro, Four-way side loader Mast type: triplex Technical condition: good Fork positioner, Iedpexxd Efsfx Ag Ueht

Condition: used, machine/vehicle number: 11974, load capacity: 5,000 kg, lifting height: 5,500 mm, free lift: 450 mm, mast type: duplex, construction height: 4,050 mm, fork length: 2,100 mm, total length: 3,250 mm, drive type: Elektro, construction width: 3,000 mm, Four-way sideloader Chassis number: 11974 Load center: 1050 mm ISO class: ISO class 4 = 5,000 - 10,000 kg Mast type: Duplex Technical condition: very good Front tires type: Vulkollan Front tires Size: 2-fold new Front tires Condition: 80 - 100% Rear tires Type: Vulkollan Rear tires Size: 4-ply new Rear tires Condition: 80 - 100% Battery Volt: 80V Battery Ah: 775Ah Battery manufacturer: New with Aquamatic 5PzS Battery year of construction: 2017 Iedpfju D R Hujx Ag Ujht Battery condition: 80 - 100% Description: Travel drive 2x5kW, working hydraulics 2 x 8 kW, steering hydraulics 1x1.5kW height extended 6650 mm platform height 420 mm frame cutout 1300 mm mast extension 2200 mm The machine is sanded down repainted, all motors newly revised new hydraulic hoses and new tires, new battery with Aquamatic and charger so the machine is as good as new again Fork positioner, implement length over carrier 3950 mm fork adjustment 580-3300 mm fork tilt +/-3.5° side guide rollers on request Roof cover, Glazed cab front and rear

Condition: used, functionality: fully functional, machine/vehicle number: 7268, Year of construction: 2008, operating hours: 2,340 h, load capacity: 4,000 kg, lifting height: 5,360 mm, free lift: 1,700 mm, fuel type: diesel, mast type: triplex, construction height: 2,690 mm, fork length: 1,200 mm, empty load weight: 6,800 kg, total length: 3,250 mm, drive type: Diesel, construction width: 2,500 mm, Four-way side loader Chassis number: 7268 Load center: 600 Fork width: 147 mm Fork thickness: 50 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Transmission: Hydrostatic Iedswdb A Iepfx Ag Uoht Technical condition: good Front tire type: Superelastic Front tire size: Front tire condition: 20 - 40% Rear tire type: Superelastic Rear tire size: Rear tire condition: 20 - 40% Description: good running condition Fork positioner, 3rd valve, 4th valve, full cabin,

Condition: good (used), Working width: 2030 mm Sheet thickness: 1.5 mm Top roller diameter: 82/90 mm Ijdsvxpptopfx Ag Ueht Bottom roller diameter: 85/92 mm Electrical connection: 380 V, 1.5 kW Weight: approx. 1300 kg Space required: 2800 x 850 x 1120 mm

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 2166, working width: 230 mm, working height: 125 mm, spindle diameter: 40 mm, spindle speed (max.): 6,200 rpm, TECHNICAL DETAILS Minimum working height: 8 mm Maximum working height: 125 mm Minimum working width: 18 mm Maximum working width: 230 mm Minimum feed speed: 6 m/min Maximum feed speed: 28 m/min Spindle speed: 6,200 rpm Spindle diameter: 40 mm MACHINE DETAILS Electrical Data Main fuse: 80 A Machine voltage: 400 V, 3PH, 50Hz Ihedpfxswyviuo Ag Uet Motors Bottom spindle: 5.5 - 7.5 kW Right spindle: 5.5 - 7.5 kW Left spindle: 7.5 - 10 kW Top spindle: 7.5 - 10 kW Dimensions & Weight Dimensions L x W x H: 4,400 x 2,000 x 1,850 mm Weight: 4,000 kg

Condition: excellent (used), Four-sided planer Weinig Profimat 22 N, 6 heads – the last one is universal. Tools included. Work video of the machine available. Very good condition. Ready for operation. Ijdpfx Agsxyxaas Uoht

Condition: used, functionality: fully functional, Year of construction: 2008, load capacity: 5,000 kg, lifting height: 4,500 mm, fuel type: diesel, mast type: duplex, construction height: 3,200 mm, fork length: 1,200 mm, drive type: Diesel, Four-way sideloader Mast type: Duplex Condition: Ready for use and fully functional Technical condition: good Ihjdpfx Agsxnfiwo Uet Fork positioner,

Condition: used, machine/vehicle number: 9-12786, Year of construction: 1992, operating hours: 15 h, load capacity: 5,000 kg, lifting height: 5,050 mm, free lift: 2,800 mm, mast type: duplex, construction height: 3,450 mm, fork carriage width: 3,560 mm, fork length: 1,650 mm, total length: 3,560 mm, drive type: Elektro, construction width: 2,600 mm, Four-way sideloader Chassis number: 9-12786 Load center: 825 mm ISO class: ISO class 4 = 5,000 - 10,000 kg Mast type: Duplex Condition: New machine Technical condition: Very good Front tires Type: Vulkollan Front tires Size: 2-fold new Front tires Condition: 80 - 100% Rear tires Type: Vulkollan Rear tires Size: 4-ply new Rear tires Condition: 80 - 100% Battery Volt: 80V Battery Ah: 775Ah Ihsdpfx Agsu D R Ewj Uet Battery manufacturer: New with Aquamatic Battery type: PzS Battery year of manufacture: 2023 Battery condition: 80 - 100% Description: New value 2023 / 1992 Entire machine dismantled down to the base frame and rebuilt - The truck was completely dismantled down to the base frame and sanded down. - Priming and new painting of frame and lift mast - New battery year of construction June 2023 with Aquamatik and charger latest charging technology - Lift mast completely disassembled, all rollers + bearings replaced. - Lift chains, fork adjustment chain, and steering chain replaced - All hydraulic hoses on the entire machine + lift mast replaced, list with connections and masses - All hydraulic cylinders are newly sealed - 2 front drive drums replaced - 4 trailing drums replaced - Control and electronics have been revised - New driver's seat, as well as displays, ignition lock, operating hours counter and direction switch - 2x travel motors, 2x pump motors and 1x steering pump motor completely revised - Brakes completely new, wheel drives revised. - Cabin 3-sided and roof with art glass mounted - Service complete, all oils and filters replaced - Safety and fork test - Drive 2x5kW, working hydraulics 2 x 8 kW, steering hydraulics 1x1.5kW Fork positioner, Implement length over carrier 3560 mm Fork adjustment 580-3300 mm Fork tilt +/-3.5° Side guide rollers on request 3rd valve, 4th valve, roof cover, half-cab, 2 work lights 1 rotating beacon Driver's cab 3 sides Plexiglas

Condition: excellent (used), Year of construction: 2004, working width: 300 mm, planing height: 120 mm, spindle diameter: 50 mm, planing width: 300 mm, working height: 1,000 mm, total width: 2,800 mm, total height: 2,400 mm, total length: 3,800 mm, overall weight: 13,000 kg, power of feed motor: 24,000 W, spindle speed (min.): 5,500 rpm, rotational speed (max.): 6,000 rpm, rotational speed (min.): 5,500 rpm, height adjustment type: electric, planer shaft diameter: 205 mm, workpiece height (max.): 120 mm, workpiece width (max.): 330 mm, input voltage: 400 V, tool diameter: 205 mm, number of spindles: 5, power: 154 kW (209.38 HP), table width: 330 mm, 4-Sided Lamella Planer 300 x 120 mm Adjustable feed speed from 30 to 150 m/min. Equipment: 2 upper and lower horizontal cutterheads Z 10; 2 right and left horizontal cutterheads, Z 10, equipped with jointers. - Horizontal shaft rotation speed: 5,500 rpm - Vertical spindle rotation speed: 6,000 rpm - Vertical spindle shaft diameter: 50 mm - Vertical spindle clamping length: max. 185 mm Tool diameters: - Horizontal shafts: 205 mm - Vertical spindle head tools: 160 - 205 mm Cutter blocks: - Thicknessing and surfacing shafts with cutter blocks: - 2 x Planer head 205 x 330 mm, Z=10, screw clamping - Lamella planer knives: 3 x 35 x 330 - 2 x Hydraulic planer head 190 x 130 mm, Z=10, screw clamping - Lamella planer knives: 3 x 35 x 130 - Weight: approx. 13,000 kg - Machine dimensions L x W x H: approx. 3,800 x 2,800 x 2,400 mm - Installed power: 154 kW Iodpfx Ajwz Nzmjg Ueht Additional Aggregates Lower Scoring Saw Unit This unit is used for milling balance scores on the lower edge of worked lamellas with a width over 200 mm. The saw blade is mounted directly onto a flat motor using a flange. Horizontal movement is pneumatic with a saw stroke of approx. 150 mm (movement within the gap between boards; activated by a mobile spot sensor). The scoring zone is set manually, and the travel distance is displayed on a counter. Vertical movement uses a pneumatic cylinder with a saw stroke of approx. 30 mm (to allow quick switching between lamellas with/without balancing slots during processing). The end stop for scoring depth is set manually, and travel is displayed on a counter. Lamellas must be fed into the machine individually, one by one (not in continuous push feed). Technical Data: - Scoring saw motor: 15 kW - Saw rotation speed: 5,000 rpm - Shaft diameter: 40 mm - Max. cutting depth: 50 mm - Tool diameter: 300 x 4 mm - Extraction hood support diameters: 120 mm - Additional feed rollers: one above (diameter 240 mm), one below (240 mm, toothed and hard-chromed). The scoring saw is delivered with a blade. - Scoring saw working area: 37.5 to 225 mm Powered Lateral Infeed Roller Pneumatically suspended. Motorized width adjustment via push-buttons (if the positioning command is set to position adjustment (option), the lateral pressure roller can be adjusted from the control panel). The set width is shown on a SIKO counter. - Roller diameter: 190 mm - Roller width: 40 mm Automatic Knife Jointing Device The knife jointing device is fixed-mounted and manually operated.

Year of construction: 1964, condition: good (used), Diskus Werke DSH 600/1000 Side Face Grinding Machine  This machine type is a machine with a motor-driven grinding spindle. Clamping and grinding of the workpieces is done with clamping devices adapted to the respective work. The devices are attached to the machine bed. The column saddle, on which the motor spindle is mounted, serves as a feed, dressing and pendulum slide. Manufacturer: Diskus Werke Model: DSH 600/1000 Serial number: 6299 Type: Side surface grinding machine Cooling lubricant: Isocool 1020 BF Coolant volume: 400 litres Concentration: 2.5% (x factor 1.6 ≙ 4%) Year of manufacture: 1964 Ihjdpfx Agehtyudo Uet Condition: used  Complete factory closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines. Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 119676, working width: 230 mm, working height: 120 mm, spindle diameter: 40 mm, rotational speed (max.): 6,000 rpm, TECHNICAL DETAILS Working height: 8/120 mm Working width: 20/230 mm Feed speed: 5/30 m/min Spindle speed: 6,000 rpm Spindle diameter: 40 mm MACHINE DETAILS Net weight: 2,500 kg Dimensions (L x W x H): 3,620 x 2,140 x 1,650 mm Total power: 41 kW Year of manufacture: 2014 Serial number: 119676 CE marking available: Yes Equipment Spindle – horizontal bottom Spindle – vertical right Spindle – vertical left Spindle – horizontal top Spindle – horizontal bottom Documentation available: No Transport dimensions: 3,620 mm x 2,140 mm x 1,650 mm Transport weight: 2,500 kg Ijdpfx Agswtddts Ujht Transport packages: 1 Additional options: Vibration monitoring Machine lamp Speed detection Hour counter Centralized lubrication

Condition: excellent (used), Four side planer KP5-220 made in Taiwan Iedpsk Ttknsfx Ag Ujht max planing width 230mm max planing height 130mm 2 sliding rollers in the tabletop number of spindles 5 motor of the fifth spindle is mounted on the floor feed on cardan shafts with smooth adjustment fully adjustable spindles machine works quietly without vibration, checked in very good condition, chrome tops

Condition: used, functionality: fully functional, Year of construction: 2008, operating hours: 3,442 h, load capacity: 2,500 kg, lifting height: 5,552 mm, fuel type: diesel, mast type: triplex, construction height: 2,450 mm, fork length: 850 mm, drive type: Diesel, Four-way side loader Mast type: Triplex Iodpexwz R Njfx Ag Usht Condition: Ready for use and fully operational Technical condition: good Sliding fork, fork positioner, Extendable forks 850/1200 mm 3rd valve, 4th valve,

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, feed rate X-axis: 24 m/min, working width: 230 mm, working height: 120 mm, spindle speed (max.): 6,800 rpm, table length: 2,500 mm, TECHNICAL DETAILS Working width: 20-230 mm Working height: 8-120 mm Spindle speed: 6,800 rpm Feed speed: 5-24 m/min Table length: 2,500 mm MACHINE DETAILS Spindle connection power: 11 kW Isdsw R T Uzopfx Ag Ueht Number of spindles: 6 EQUIPMENT ATS system with automatic 2-axis positioning for spindle 3 and 4 Mechanical brake for all motors Spindle can be used universally, 360° Note: The U-spindle is not included. A new one costs approximately €5,000.

Condition: good (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 12/09742, working width: 3,000 mm, bale length: 3,050 mm, roller (bottom) diameter: 400 mm, roller (top) diameter: 405 mm, sheet thickness (max.): 30 mm, TECHNICAL DETAILS Sheet width: 3,000 mm Upper roll working length: 3,050 mm Lower roll working length: 3,050 mm Ihodpew Eh Hvofx Ag Uet Side rolls working length: 3,100 mm Upper roll diameter: 405 mm Lower roll diameter: 400 mm Side rolls diameter: 320 mm Plate thickness for bending: max. 30.8 mm Plate pre-bending: max. 20 mm Distance between upper and lower roll: 70 mm MACHINE DETAILS Total power requirement: 45 kW Electrical connection: 220/380 V Roll drives: 2 units FURTHER DETAILS Tilting of upper roll from operator panel Opening of swing bearing from operator panel Overload protection for conical bending device

Condition: excellent (used), Four-side planer / four-sided moulding machine Compact 23 Max. working width 230 mm Max. working height 125 mm Max. profile tool diameter 180 mm Ihjdpet Dk Rxofx Ag Uet Surfacing spindle 4 kW Vertical spindle 5.5 kW Upper horizontal spindle 4 kW Lower horizontal spindle 4 kW Machine dimensions 3200 x 1400 x 1600 mm, Weight 1850 kg

Condition: excellent (used), Weinig Hydromat 17 BL planer with destacker Feed: 60 m/min Heads: 1. lower - 11 kW Ihodev Euy Rjpfx Ag Ust 2. right side - 7.5 kW 3. left side - 7.5 kW 4. upper - 11 kW 5. lower - 7.5 kW 6. upper - 7.5 kW 6 feed rollers in the table Feed motor - 15 kW Planing width - 170 mm Planing height - 120 mm Machine on elevated platform Loading included in the price. Perfect condition!

Condition: used, Year of construction: 1989, Used machine Year of manufacture: 1989 Technical specifications: Ihodpfxow I U Uqo Ag Uot Length of jointer table: 2,100 mm Diameter of tool spindle: 30 mm Diameter of cutterheads: 100 mm Cutterhead speed: 6,000 rpm Working width: 30 – 180 mm Working height: 6 – 120 mm With optionally available smaller cutterhead for the left shaft and narrower feed rollers, a minimum width of 15 mm can be achieved. Motor power below, left, right: each 3.7 kW Motor power above (thicknessing shaft): 5.5 kW Feed speed: 6 and 12 m/min Electric height adjustment With 1/10 incremental control Includes cutterheads Extraction ports: 160/120/120/140 mm Availability: short-term Storage location: Flörsheim

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 600 h, load capacity: 5,000 kg, lifting height: 4,500 mm, fuel type: electric, mast type: duplex, construction height: 3,250 mm, fork length: 1,600 mm, drive type: Elektro, Four-way sideloader Mast type: Duplex Condition: Ready for use and fully functional Technical condition: good Fork positioner, Iodpfx Asxwfu Seg Ujht

Year of construction: 2001, condition: excellent (used), machine/vehicle number: PB 04 02.01/1070, Further MACHINERY / SPARE PARTS & MACHINE COMPONENTS of this type are available in our warehouse. ON REQUEST Ihjdpfx Asidqtlog Ujt

Condition: used, Year of construction: 1966, 4-sided planer HKM 16 Ihodownrgfspfx Ag Uot Year of manufacture: 1966 Hydraulic feed, 6 spindles Planing size: 160x120mm