Used Flatbed Semi Trailer for sale (18,084)

Condition: new, tire size: 315/80R22.5, Equipment: ABS, 🇮🇹SEM. MENCI SA700G TIPPING BODY - CHASSIS TYPE: SA700G - AXLE BRAND: ROR CAMPANATO ETO - AXLE CONFIGURATION: 1 STEERING + 2 FIXED DISC BRAKES - KNORR SYSTEM 2 SENSORS / 2 CHANNELS, LIFTING DEVICE, 1 LIFT AXLE WHEELBASE: 1310 mm STANDARD LEGS CHASSIS COLOUR: METALLISED GREY MENCI Hfodpfevzh T Njx Afcsf MANUAL ANTI-UNDER-RUN BAR PENTA CYLINDER BODY TYPE: ROUND BODY BODY MATERIAL: STEEL BODY LENGTH: 7450 mm BODY HEIGHT: 1840 mm REAR DOOR B, INCLINED 20 DEGREES BODY CAPACITY: 30 m³ - FLOOR THICKNESS: 5.5 mm HB 500 - SIDE PANEL THICKNESS: 3.5 mm HB 500 - FRONT WALL THICKNESS: 4 mm HB 500 - TAILGATE THICKNESS: 4 mm HB 500 - HYDRAULIC TAILGATE OPENING HYDRAULIC DOG RELEASE NO. 2 SAFETY LOCKS BODY COLOUR: WHITE IVECO IC194 SIDE STRIPES COLOUR: BLUE RAL 5010 TAILGATE WITHOUT SEAL TPMS BRAND: KNORR REAR LIGHTS TYPE: EUROPOINT III NO. 10 SPEEDLINE DISCS 22.5X9.00 BOLT HOLE MOUNTING D.26 NO. 10 TYRES: GY 315/80R22.5 KMAX SG2 VIBRATOR PRE-ARRANGED STAINLESS STEEL TOOL BOX 400X300X450 mm STANDARD PRESSURE GAUGE NO. 2 TOW HOOKS HIGH-SPEED DUMP VALVE WITH PUSH BUTTON CRAMARO ELECTRIC ROLL COVER SYSTEM TYPE C REMOTE CONTROL COVER SYSTEM: YES COLOUR: BLUE RAL5010 ARCH HEIGHT: 500 mm ROLLER HOOKS CUSTOMIZED FINANCING OR LEASING OPTIONS AVAILABLE ON SITE. FROM 24 UP TO 96 INSTALMENTS, ALSO WITH ZERO DOWN PAYMENT. OTHER BRANCHES OF OUR GROUP: DOMENICO TRUCK SRL, NAPLES HEADQUARTERS DOMENICO ESPOSITO S.P.A., EBOLI (SA) - OFFICIAL DEALER MERCEDES-BENZ, FUSO, FOTON TRUCK, PIAGGIO COMMERCIAL, AND MAXUS CONTACTS: 0823 1686306 335 6713062 BRANCH OPENING HOURS: MONDAY-FRIDAY 8:30/19:00 - SATURDAY 08:30/14:00 WE OFFER A WIDE CHOICE OF USED MULTI-BRAND COMMERCIAL/INDUSTRIAL VEHICLES: Fiat – Hyundai – Daf - Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania - S-Way - S500-V8-650-580-730-S500-S 500-S500 – Stralis – Man - Nissan V8 - Intarder- 770s -Limited Edition - 660 S Semi-trailer – Refrigerated Tank Semi-trailer – Lamberet - Schmitz - Isuzu – Fixed Flatbed – Crane – Tipper – 4 axles - 4 Rear Axles -Tway-T-Way-540- 460 hp - Xway-X-Way-Three-way - V8 - Scania - Frost Edition Curtain Side – Box Body – Tailgate Loader – Refrigerated Cell – Insulated With Fridge – Van Domenico Truck srl declines any responsibility for possible discrepancies regarding technical equipment, options, or characteristics which may, in some cases, differ from those indicated in the description. We invite you to verify the features of the specific vehicle.

Condition: new, functionality: fully functional, overall weight: 39,000 kg, tire size: 385/65R22.5, Equipment: ABS, MENCI SEMI-TRAILER WITH “SQUARE” TIPPER BODY - SA850R Volume: 45.4 m³ Dimensions: 9,200 x H 2,000 mm Floor: 6 mm Rear Floor: 8 mm Unladen Weight: 6,650 kg GVW: 39,000 kg Description, Version & Accessories - 3rd steering axle SAF with disc brakes Ø430 (ET120) 2/2 - 1st axle with automatic lifting - CRAMARO hermetic electric tarpaulin type C (2023) with cover - Stainless steel toolbox 90x50x50 cm - Toolbox 90x50x25 cm - Complete ADR kit + A & R plates - Pressure gauge - Electric motovibrator operated by remote for cover system - PROMETEON 385/65 R 22.5 tyres - Steel rim 385/65 R 22.5 OFFSET 0/120 - Remote control for CRAMARO tarpaulin - Additional rear LED work light - Painted hubs - Full LED rear lighting - TPMS (Tire Pressure Monitoring System) - Hub color: RED RAL 3020 Hedpfjvzh T Asx Afcoff - Tarpaulin cover color: BLUE RAL 5002 - Tarpaulin height at bows H=300 mm - Cover with ADR tarpaulin - 3 access steps - Anti-wear triangles Chassis in steel, body in alloy Standard Configuration: - Steel chassis - Pneumatic suspension with manual height adjustment valve - Jost landing legs with oscillating curved base - Brake system with EBS 2S/2C and load-sensing valve - Electrical system according to A.D.R. regulations - Aluminum air tanks, pneumatic quick suspension release device - Tipping system with front 5-stage telescopic cylinder - Pneumatic parking brake - Descent safety valve, double-acting piston hydraulic system with gate valve - Front ladder and removable ladder over the mudguards - 2 towing eye holes on rear underrun protection bar hinge FINANCING OR TAILORED LEASING OPTIONS AVAILABLE ON SITE. From 24 up to 96 installments, also with zero down payment. OTHER BRANCHES OF OUR GROUP: DOMENICO TRUCK SRL NAPLES HEADQUARTERS DOMENICO ESPOSITO S.P.A. EBOLI (SA) - OFFICIAL DEALER MERCEDES-BENZ, FUSO, FOTON TRUCK, PIAGGIO COMMERCIAL AND MAXUS CONTACTS: 0823 1686306 335 6713062 BRANCH OPENING HOURS: MONDAY–FRIDAY 8:30/19:00 - SATURDAY 08:30/14:00 WE OFFER A WIDE SELECTION OF USED MULTI-BRAND COMMERCIAL/INDUSTRIAL VEHICLES, INCLUDING: Fiat – Hyundai – Daf - Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania - S-Way - S500-V8-650-580-730-S500-S 500-S500 – Stralis – Man - Nissan V8 - Intarder- 770s - Limited Edition - 660 S Semi-Trailer - Refrigerated Semi-Trailer – Lamberet - Schmitz Isuzu - Fixed Box - Crane - Tipper - 4 axle - Rear 4 Axle - Tway - T-Way-540- 460 hp - Xway - X-Way - Three-Way - V8 - Scania - Frost Edition Curtain Sider - Box Body - Tail-lift Body - Refrigerated Unit - Insulated With Fridge - Van Domenico Truck srl declines any responsibility for any discrepancies regarding technical specifications, options or features that may in some cases differ from those described. Please verify the specific features of the vehicle.

Condition: ready for operation (used), functionality: fully functional, empty load weight: 6,817 kg, maximum load weight: 32,183 kg, overall weight: 39,000 kg, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 11/2015, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385 65 r22,5, tire condition: 90 %, Year of construction: 2015, Equipment: ABS, tail-lift, Trailer is ready for operation. Under-slung 2.0 t tail lift 6 new tyres Various toolboxes on both sides Hjdpjx Rupbjfx Afceff Signs of use – see photos Location: 13089 Berlin

Condition: excellent (used), axle configuration: 3 axles, tire condition: 100 %, Year of construction: 2009, Cifa Invetta 36x concrete pump on Volvo FM400 chassis. Boom reach: 36 m Output: 105 m3/h Hopper capacity: 900 l 2x radio remote controls + wired control Halogen headlamp 100% new tires Technical inspection valid until 01.08.2026 Additional rear-mounted work lights Rotating beacons White color Hjdpjxxyp Hefx Afcjff Diesel Engine displacement: 12,780 cm3 Power: 300 hp Number of axles: 3 Manual gearbox Double rear wheels Mileage: 95,280 km First registration: January 12, 2009 Accident-free Registered in Poland Automatic air conditioning Factory radio On-board computer Electric windows Power steering GPS navigation

Condition: new, maximum load weight: 27,500 kg, overall weight: 35,500 kg, axle configuration: 3 axles, loading space length: 13,600 mm, loading space width: 2,550 mm, loading space height: 3,000 mm, total width: 2,550 mm, total height: 2,060 mm, Year of construction: 2025, Equipment: ABS, Hinterachse 3: Reifenmaß: 435/50R19.5, Marke Achsen: BPW, Reifen Profil links außen: 100% Zuladung: 27,430 kg Loading capacity: 1360 x 255 x 106 cm Marke des Aufbaus: AKLU Pumpe: Yes === Information in English === Rear axle 3: Tire size: 435/50R19.5, Make axles: BPW, Tire profile left outer: 100% Carrying capacity: 27,430 kg Dimensions of cargo space: 1360 x 255 x 106 cm Make of bodywork: AKLU Pump: Yes new machine unused Brand: DIV. Year of construction: New Type: Twente Trucks AKLU Mega extendible car transporter RV camper loadramp Construction: Car transporter Id: VK HHD Price {¤): ¤ 51,000,- Hjdpsmnpc Ijfx Afceff

Condition: new, maximum load weight: 37,820 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our entire vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment. Full equipment details available upon request. Gooseneck: - Gooseneck with beveled front corners approx. 45° and rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood floor covering approx. 30 mm thick Loading area: - 1 pair of fixed wheel recesses in front of the axles, approx. 2,610 x 970 x 400 mm (L x W x D) - Wheel recesses with square climbing slats approx. 15 x 15 mm and widenings in the lower section - Between the 1st and 2nd axles, a pair of fixed wheel recesses, approx. 1,610 x 700 x 400 mm (L x W x D) - Incl. 3-piece removable galvanized covers over the wheel recesses (W approx. 670 mm) – max. point load approx. 5 t/each - Recess in the chamfer and extending into the loading area for receiving the excavator bucket arm (approx. 2,900 x 750 x 210/290 mm (L x W x H)) - 1 pair of lashing rings, horizontal, at the front of the loading area (LC 10,000 daN) - 5 pairs of flip-out lashing rings (LC 5,000 daN) - 3 pairs of flip-out lashing rings (LC 10,000 daN) - 2 pairs of lashing rings in the excavator arm recess (LC 5,000 daN) - Cut-outs in the outer frame of the loading area for securing straps (LC 2,000 daN) One-piece Steel Ramps: - One pair of galvanized one-piece steel ramps, approx. 3,000 x 800 mm, with approx. 48 mm thick hardwood covering - Ramp with hydraulic lifting mechanism, hydraulically adjustable - Maximum load per pair: 40,000 kg - In accordance with Regulation 1230/2012/EU, ramps with a length less than 300 mm do not count towards the vehicle length in the driving position Landing gears: - JOST landing gears (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: Hodpfx Aew Tpqwofcoff - BPW axles and suspension, 2 fixed axles, 1 trailing steering axle - Technical axle load: 12,000 kg each - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with lift and lower valve - Axle tool kit Tyres: - Tyres 235/75 R 17.5 3PMSF – manufacturer of our choice - TPMS tyre pressure monitoring system in accordance with ECE R 141. The data transmission to the truck is via standardized EBS interface according to ISO 11992. For correct display, the truck must be able to transmit and display this data Braking system: - WABCO braking system in accordance with EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Steel construction: - Steel structure made of high-tensile fine-grain steels - Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: - Electrical system according to EU regulations - Lighting 24 volts ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the indicator - ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets as per ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: - Complete steel structure automatically shot-blasted with blasting wheel machine after welding - Second shot-blasting using corundum for optimal coating adhesion - HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure maximum corrosion protection - Final painting with 2 coats of two-component topcoat, single color in RAL 3002 Carmine Red, according to the RAL system 841GL - Rims in silver - Rear section metallized and in RAL 9010 (continuation see ori

Condition: new, maximum load weight: 38,140 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Excerpt from equipment. Full equipment details available on request. Gooseneck: - Gooseneck with front corners chamfered approx. 45° and rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, approx. 30 mm thick Hedpfow Tpq Djx Afcsff Loading area: - Telescopic loading area with rear incline approx. 1,000 mm x 8° - Between 1st and 2nd axle: one pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm (L x W x D) - Incl. 3-piece removable galvanized cover over wheel recesses (width approx. 670 mm – max. point load 5 t / pc.) - 1 pair of flat lashing rings at the front of the loading area (LC 10,000 daN) - 4 pairs of outward folding lashing rings (LC 5,000 daN) - 3 pairs of outward folding lashing rings (LC 10,000 daN) - Cutouts in the outer frame for attaching tie-down straps (LC 2,000 daN) Landing legs: - JOST landing legs (manual) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Tyres: - Tyres 235/75 R17.5 3PMSF, make at our discretion - TPMS tyre pressure monitoring system in accordance with ECE R 141 - Data transfer to the towing vehicle via standardised EBS interface as per ISO 11992 - For correct display, the towing vehicle must be able to receive and display this data Axles: - BPW axles and suspension, 2 axles rigid, 3rd axle self-steering - Technical axle load: 12,000 kg - Electromagnetic reverse lockout activated automatically when reversing and manually - Air suspension with lifting and lowering valve. Axle tools Braking system: - WABCO braking system according to EU regulations with EBS-E (2S2M) without piping to the tractor unit Electrical system: - Electrical system per EU regulations - LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the indicator - ASPÖCK-UNIBOX at front connection strip with 24N, 24S & 15-pin sockets, according to ISO; 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Steel construction: - Steel structure made of high-strength fine-grained steels - Steel qualities: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: - Complete steel structure automatically shot-blasted after welding in a wheel-blasting system - Second shot-blasting with corundum for optimum coating adhesion - HRM metallization of entire chassis with ZINACOR 850 (85% zinc/15% aluminium) for maximum corrosion protection - Final painting with 2 layers of 2K topcoat, single-colour in RAL 3002 Carmine Red, rear section metallized and painted in RAL 9010 Pure White - Metallic finish not available - Paint structure tested in salt spray test according to ISO 9227-NSS - Internal cavities sealed with special wax Including the following accessories: - On the gooseneck and rear, left and right, one holder for warning signs each, including socket - Spare wheel holder in front of the front wall (without spare wheel) - 2-inch king pin - Galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings on the galvanized front connection bar - Galvanized folding supports under the inclination at the rear of the loading area - A hardwood crash protection strip at the rear wall from gooseneck to the loading area - 1 pair of recessed lashing rings along the central beam at the rear inclination (LC 10,000 daN) - Aluminium drop sides and tailgate on the gooseneck

Condition: new, maximum load weight: 37,680 kg, overall weight: 50,960 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete inventory of vehicles, including those available for immediate and short-term delivery, on our website. Extract from the equipment features. Complete specification available on request. Gooseneck * With approximately 30 mm thick hardwood flooring. Gooseneck with straight rear section * 3 pairs of lashing rings (LC 5,000 daN) Loading Area * Extendable design * 5 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading area (LC 10,000 daN) * Cutouts in the outer frame of the loading area for attaching tension straps (LC 2,000 daN) * Approx. 48 mm thick hardwood flooring, treadplate covering above the axles Landing Gear * JOST mechanical landing gear with 2-speed gearbox, lifting capacity approx. 24 t (test load approx. 50 t) Tyres * 205/65 R 17.5 Axles * BPW axles and suspension * 1st axle fixed, all other axles hydro-mechanically forced-steered * Air suspension with lift and lower valve Brake System * In accordance with EU regulations, with EBS-E (4S3M) without connection lines to the tractor unit Steel Construction * Made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork * Premium and durable corrosion protection for the standard shot-blasted welded frame, guaranteed by a two-component (2K) zinc dust primer * High-quality two-component (2K) top coat, single colour RAL 3002 carmine red * Rims in silver Hfjdpfx Afsv Etx Eocof Accessories Included * 2" king pin * Galvanised steel front wall, approx. 400 mm high * Yellow-red air couplings on galvanised front connection strip * 4 chocks with holder on the front wall * Spare wheel holder in front of the front wall * Electro-hydraulic unit * Steering from the front and rear via cable remote control with push buttons, including single-track control of the axles (without installation in the tractor unit) * European reflective signs (red-yellow) at the rear of the trailer * Yellow reflective tape according to EU regulations on sides, extensions, and rear of the trailer * Bracket for warning signs including socket, left and right on the gooseneck and rear plate * Bracket for rotating beacon at the rear of the trailer * Galvanised foldable support legs under the loading area's chamfer * Load gauge for determining axle loads including load diagram * 7 pairs of WADER container pockets for: 1x 20' or 1x 40' container on the loading area, 1x 40' container over the gooseneck, or 2x 20' containers * Support block with 1 pair of WADER container pockets, fifth wheel load approx. 20,000 kg * 7 pairs of stake pockets for approx. 100 x 50 mm plug-in stakes in the outer frame of the loading area * Galvanised, extendable width extensions, approx. 230 mm per side * Sliding hook-in rails for aluminium loading ramps at the rear of the vehicle * 1 pair of recessed lashing rings along the central beam at the rear of the loading area (LC 10,000 daN) * 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear * BEKAMAX (Pico) central lubrication system with standard grease NLGI-2 and removable pump protection * 2 LED reversing lights mounted at the rear * Acoustic reversing warning signal * HRM Metallisation (High Resistance Metallisation)

Condition: new, maximum load weight: 33,865 kg, overall weight: 48,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete range of vehicles, including those available for immediate delivery or on short notice, on our website. Below is an excerpt from the specification. The full equipment list is available upon request. Gooseneck: * Gooseneck with front corners chamfered approx. 45° and a rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Load area: * Double extendable design with rear bevel approx. 500 mm x 8° * 6 pairs of folding external lashing rings (LC 5,000 daN) * 4 pairs of folding external lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading area (LC 10,000 daN) * 1 intermediate table approx. 250 mm * Hardwood flooring approx. 48 mm thick, over axles with checker plate covering * Cut-outs in the external frame of the loading platform for attaching tie-down straps (LC 2,000 daN) Axles: * BPW axles and suspension, all axles forced-steered hydro-mechanically * Design axle load: 12,000 kg each * Air suspension with lift and lower valve * Axle tools included Tyres: * 245/70 R 17.5, load index (146/146 F) * Brand of our choice Hsdpfow Tprzsx Afcjff Landing legs: * JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Braking system: * Braking system according to EU regulations with EBS-E (2S2M) without connection lines to the tractor unit Paintwork: First-class and durable corrosion protection * High-quality, one-colour 2-component (2K) topcoat in RAL 3002 carmine red * Rear section metallized and coated in RAL 9010 (pure white) Steel Structure: Steel construction from high-strength fine grain steels. * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: * Electrical system according to EU regulations * 24 Volt lighting ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets, compliant with ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Including the following additional equipment: * 2-inch kingpin * Galvanized steel front wall, approx. 400 mm high * Yellow-red air couplings at the galvanized front connection strip * Spare wheel carrier in front of the front wall * Electro-hydraulic unit * Rear and front steering via cable remote control with push-buttons, with single-track monitoring of the axles (without installation in the tractor unit) * Mount at the rear of the gooseneck for aluminum loading ramps * Removable aluminum ramp hanging rail at the rear of the vehicle * Galvanized folding supports beneath the slope of the load area * On the gooseneck: plug-in aluminum side boards and rear board, approx. 2,440 x 400 mm (L x H) * The rear galvanized stanchions are removable (body length approx. 2,560 mm) * One galvanized toolbox, integrated in the chamfered gooseneck * 4 pairs of WADER container pockets in the loading area for one 20', two 20', one 40' or one 45' container * 8 pairs of stanchion pockets (approx. 100 x 50 mm) in the external frame of the loading platform * Galvanized extensions, extendable by approx. 230 mm per side * Adjustable hanging rails for aluminum ramps at the rear of the vehicle * 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear * Central lubrication system with 2 BEKAMAX (Pico) pumps, filled with standard grease NLGI-2 and removable pump guard * 2 LED reversing lights mounted on the rear panel * HRM Metallization (High Resistance Metallisa

Condition: new, maximum load weight: 39,720 kg, overall weight: 50,960 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Sample equipment features. Full specification upon request. Gooseneck * With beveled front corners approx. 45° and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring, approx. 30 mm thick Loading Platform Loading platform in extendable design * 5 pairs of fold-out outer lashing rings (LC 5,000 daN) * 3 pairs of fold-out outer lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN) * Recesses in the outer frame of the loading platform for securing straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, over axles with chequer plate covering Landing Gear * JOST (mechanical) with 2-speed gearbox, approx. 24 t lift capacity (approx. 50 t test load) Axles * BPW axles: 2 fixed axles, 2 steering axles, drum brakes * Air suspension with lift/lower function * Self-steering axle with electro-magnetic reverse lock, activated via reverse gear or manually * Tires: 205/65 R 17.5 Brake System * Wabco brake system in accordance with EU directives with EBS-E (4S3M), without interconnecting lines to the tractor unit Steel Construction * Made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Paintwork * First-class, durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer * High-quality 2-component (2K) top coat, single-color, RAL 3002 Carmine Red * Rear section metallized and painted in RAL 9010 (Pure White) * Rims in silver Accessories Included * 2-inch king pin * Galvanized front steel bulkhead approx. 400 mm high * Spare wheel holder in front of bulkhead * Yellow-red air couplings on galvanized connector bar front * 4 wheel chocks with holder at bulkhead * Bracket at rear of gooseneck for aluminum loading ramps * Galvanized folding supports under inclined edge of loading platform * Holder for beacon at rear of trailer * Yellow reflective tape on sides, extension, and rear in accordance with EU regulations * Brackets for warning signs with socket on both sides at the gooseneck and rear panel * TPMS tire pressure monitoring system per ECE R 141. Data transmission to the tractor unit via standardized EBS interface according to ISO 11992; for correct display, the tractor unit must support data transmission and display * Plug-in aluminum side walls and tailgate on gooseneck, approx. 2,440 x 400 mm (L x H); rear galvanized stakes are removable (body length approx. 2,560 mm) * Galvanized toolbox, integrated in gooseneck slope * 6 pairs of WADER container locks in loading platform, for 1 x 20' container, 2 x 20' containers or 1 x 40' container * Sliding mounting rails for aluminum ramps at rear of vehicle * 7 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm, in the outer frame of the loading platform * Galvanized cross bracket under the loading platform Hsdju Sd U Ujpfx Afcsff * Galvanized extendable widenings, extendable approx. 230 mm per side * Lift axle on front axle, controlled via TEBS E according to current axle load and load status * 5 pairs of recessed lashing rings along the central beam (LC 5,000 daN)

Condition: new, empty load weight: 13,780 kg, maximum load weight: 26,000 kg, axle configuration: > 3 axles, suspension: steel, wheelbase: 3 mm, mileage: 150 km, power: 480 kW (652.62 HP), gearing type: automatic, emission class: euro6, fuel: diesel, load capacity: 12,220 kg, Equipment: Bluetooth, air conditioning, central locking, cruise control, fridge, onboard computer, rear view camera, HIAB MULTILIFT FUTURA 18T Telescopic arm 1400mm Stabilisers Radio remote control Skip stops Chains with 43 links BKGC hooks Hour meter Storage boxes Rockinger RO 50 hitch Aluminium mudguards Reversing camera Air conditioning Refrigerator Hsdpfx Afox Hkulsceff Blind spot monitoring Multimedia touchscreen Bluetooth Sunroof Differential lock … Wheelbase 3400mm

Condition: used, empty load weight: 4,260 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 10/2010, loading space length: 7,100 mm, loading space width: 2,460 mm, loading space height: 2,750 mm, loading space volume: 48 m³, suspension: air, tire size: 385/65 R 22,5, wheelbase: 1,810 mm, color: white, Equipment: ABS, Disc brake EBS Payload 13,740 kg Lifting and lowering device Etscha soft top Hfodotv I E Ejpfx Afcjf Portal doors SAF axles Errors excepted

Condition: used, empty load weight: 6,300 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 03/2016, loading space length: 7,700 mm, loading space width: 2,350 mm, loading space height: 1,800 mm, loading space volume: 30 m³, tire size: 385/65 R22,5, wheelbase: 1,310 mm, Equipment: ABS, Color RAL 9006 white aluminum Disc brake EBS Payload 31,700 kg Air lift suspension Floor 5 mm - walls 4 mm BPW axles Alcoa aluminum rims Lifting and lowering device Grain pusher Hedpfx Ajvu Ukbsfcsff Platform Rolling tarpaulin Foldable underrun protection Errors excepted

Condition: new, empty load weight: 490 kg, maximum load weight: 1,510 kg, overall weight: 2,000 kg, loading space length: 4,050 mm, loading space width: 1,780 mm, loading space height: 300 mm, tire size: 155R13, Felge schwarz, High loader tandem from the manufacturer ANSSEMS model PSX2000 405x178 Go-Getter. The standard equipment of the Anssems flatbed high loader with brake includes black aluminum side panels, all foldable and removable, black rims, storage box, LED lighting, sturdy eccentric locks, lashing eyes on the outside and inside, profile channels for attaching accessories or load securing, very stable welded steel frame, pull-out supports for tailgate, support wheel and a V-drawbar. We also offer accessories for Anssems car trailers such as high tarpaulin, flat tarpaulin, net hooks, grid attachment, side wall attachment, rear support set, belts and anti-theft device. Hsdpfx Afoq Rfkcjceff

Condition: new, empty load weight: 490 kg, maximum load weight: 2,500 kg, overall weight: 2,500 kg, loading space length: 4,050 mm, loading space width: 1,780 mm, loading space height: 300 mm, tire size: 185/70R13, Felge schwarz, High loader tandem from the manufacturer ANSSEMS model PSX2500 405x178 Go-Getter. The standard equipment of the Anssems flatbed high loader with brake includes aluminum drop sides, all folding and removable, stable eccentric locks, lashing eyes on the outside and inside, profile channels for mounting accessories or load securing, very stable welded steel frame, pull-out supports for tailgate, support wheel and a V-drawbar. Hfodpoq Rfk Dsfx Afcsf We also offer accessories for Anssems car trailers such as high tarpaulin, flat tarpaulin, net hooks, grid attachment, side wall attachment, rear support set, accessory box, straps and anti-theft device.

Condition: repair required (used), functionality: unexamined, Year of construction: 1978, Used liquid gas semi-trailer, on 3 axles, year of manufacture 1978 (with documentation) Contents approx. 42,000 liters Tank diameter approx. 2,250 mm Tank length approx. 11,945 mm Vehicle width approx. 2,500 mm Total height approx. 3,500 mm Operating pressure: 25 bar Weight: approx. 12,000 kg Hodpfxovmbuwj Afcoff otherwise as per sketch

Condition: good (used), functionality: fully functional, empty load weight: 2,600 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 07/2016, loading space length: 7,150 mm, loading space width: 2,480 mm, loading space height: 2,400 mm, total length: 9,180 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire condition: 50 %, color: grey, Year of construction: 2016, Equipment: ABS, center pivot plate, BDF swap body trailer Has been used in a driving school for the past 5 years, so it has always been driven empty. Hfsdpfxsxzipzo Afcef

Condition: used, empty load weight: 4,950 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 08/2016, loading space length: 7,650 mm, loading space width: 2,330 mm, loading space height: 1,470 mm, loading space volume: 25 m³, tire size: 385/65 R22,5, wheelbase: 1,310 mm, color: white, Equipment: ABS, Disc brake EBS Hfsdpsw H Rzrjfx Afcsf Payload 34,050 kg Air-lift suspension with steel reinforcement Aluminium frame electric sliding roof Marcolin Foldable underrun protection SAF axles Alcoa aluminium rims Errors excepted

Condition: used, empty load weight: 5,300 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 03/2016, next inspection (TÜV): 04/2026, loading space length: 7,700 mm, loading space width: 2,430 mm, loading space height: 1,650 mm, loading space volume: 30 m³, tire size: 385/65 R22,5, wheelbase: 1,310 mm, Equipment: ABS, Color RAL 9006 white aluminum Disc brakes EBS (Electronic Braking System) Payload 29,700 kg Air-lift suspension BPW axles Alloy wheels Lifting and lowering device Hfjdpfx Afew E E Tgocof Folding underrun protection Grain discharge slider Rolling tarpaulin Platform Subject to errors and omissions

Condition: good (used), functionality: fully functional, overall weight: 39,000 kg, axle configuration: 3 axles, suspension: air, Year of construction: 2015, operation weight: 32,700 kg, Equipment: ABS, Sattelauflieger Menci SA850R ALU-Muldenkipper 36cbm with verschiebbarer Plane 3 Achsen luftgefedert BPW-Achsen zGG 39,000kg - Nutzlast 32,700kg Total-Länge Sattelauflieger 10.7m Breite 2.55m 1. Achse höhenverstellbar 3. Achse lenkbar Reifen 50% (385/65 R22.5) ABS Hjdpfx Afetznalocoff alle Angaben ohne Gewähr/Irrtum vorbehalten

Condition: good (used), functionality: fully functional, overall weight: 39,000 kg, axle configuration: 3 axles, suspension: air, color: white, Year of construction: 2015, operation weight: 32,700 kg, Equipment: ABS, Sattelauflieger Menci SA850R ALU-Muldenkipper 36cbm with Plane luftgefedert 3 Achsen BPW-Achsen zGG 39,000kg - Nutzlast 32,700kg Hodpotzlxljfx Afcsff Total-Länge Sattelauflieger 10.7m 1. Achse höhenverstellbar 3. Achse lenkbar Reifen 50% (385/65 R22.5) ABS alle Angaben ohne Gewähr/Irrtum vorbehalten

Condition: good (used), functionality: fully functional, overall weight: 39,000 kg, axle configuration: 3 axles, suspension: air, Year of construction: 2015, operation weight: 32,700 kg, Equipment: ABS, Sattelauflieger Menci SA850R ALU-Muldenkipper 36cbm with verschiebbarer Plane luftgefedert 3 Achsen BPW-Achsen zGG 39,000kg - Nutzlast 32,700kg Total-Länge Sattelauflieger 10.7m Breite 2.55m Hedpjtzlmiofx Afcjff 1. Achse höhenverstellbar 3. Achse lenkbar Reifen 50% (385/65 R22.5) ABS alle Angbaen ohne Gewähr/Irrtum vorbehalten

Condition: good (used), functionality: fully functional, overall weight: 39,000 kg, axle configuration: 3 axles, suspension: air, Year of construction: 2015, operation weight: 31,800 kg, Equipment: ABS, Settelauflieger Menci SA105R N ALU-Muldenkipper 52cbm with verschiebbarer Plane 3 Achsen luftgefedert BPW-Achsen zGG 39,000kg - Nutzlast 31,800kg Hedpstv Eiuefx Afcsff Total-Länge Settelauflieger 12.04m Breite 2.55m 1. Achse höhenverstellbar 3. Achse lenkbar Reifen 50% (385/65R22.5) ABS alle Angaben ohne Gewähr/Irrtum vorbehalten

Condition: good (used), functionality: fully functional, maximum load weight: 39,000 kg, axle configuration: 3 axles, first registration: 12/2015, loading space volume: 36 m³, suspension: air, Year of construction: 2015, operation weight: 32,700 kg, Equipment: ABS, Sattelauflieger Menci SA850R ALU-Muldenkipper 36cbm with verschiebbarer Plane 3 Achsen luftgefedert zGG 39,000kg - Nutzlast 32,700kg BPW Achsen Hedpjtv Dn Tjfx Afceff Total length LKW 10.70m Breite 2.55m 1. Achse höhenverstellbar 3. Achse lenkbar Reifen 50% (385/65 R22.5) ABS alle Angaben ohne Gewähr/Irrtum vorbehalten

Condition: ready for operation (used), Year of construction: 2011, Gas semi-trailer cryogenic for LNG (Liquid methane). manufacturer: CRYOCAN EU registration. Year: 2011 Volume: 50,25 м3 Vacuum certificate We have also other tankers for LIN, LOX, LAR, LNG und CO2, argon, oxygen, nitrogen and carbon dioxide, hydrogen Hfjdpjtulh Iofx Afcsf We will be glad to answer your questions via Phone and E-mail