Used Trailer Work Platform for sale (80,086)

Condition: used, functionality: fully functional, Year of construction: 2001, load capacity: 200 kg, lifting height: 21,000 mm, Trailer-mounted work platform, trailer work platform, telescopic platform, aerial work platform DENKA Type: DL21 Year of manufacture: 2000 Load capacity: 200 kg Platform dimensions approx. 1.0 x 0.7 m Transport dimensions approx. 8.2 x 2.46 x 1.8 m Weight approx. 2500 kg Working height approx. 21.3 m Cjdpfxexkr T Is Adxjhd Platform height approx. 19.3 m Outreach approx. 9 m (center of basket/80 kg) Hydraulic drive for maneuvering (can be operated from the basket) Automatic cable reel Outriggers can be operated from the basket TÜV: new inspection will be done UVV: new inspection will be done Extensive overhaul work was carried out on the platform in 2022: - Paintwork renewed - Hoses replaced - New batteries - All oils changed - New inspection logbook issued by the manufacturer - New tires - Brakes overhauled - Vehicle wiring replaced - Overrun device overhauled - Reinforced jockey wheel

Condition: used, machine/vehicle number: 51.E164-010-01, Year of construction: 2008, Meusburger/IFE MPS-3 semi-trailer including screening machine. Enquiries only via email or Machineseeker, please. Chedpfxevpfqhe Adxod

Condition: new, maximum load weight: 52,810 kg, overall weight: 63,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete range of immediately and soon available vehicles on our website. Excerpt from the equipment list. Full specifications available on request. Cargo area: * Cargo area with approx. 30 mm thick hardwood floor * 10 pairs of folding external lashing rings (LC 10,000 daN) Landing legs: * Hydraulic landing legs TPMS: * TPMS tire pressure monitoring system compliant with ECE R 141. Data transmission to the tractor unit is via the standardized EBS interface according to ISO 11992. For correct display, the tractor must be capable of transmitting and displaying these data. Axles and suspension: * BPW axles, technical capacity 12,000 kg each, first axle fixed, all others hydro-mechanically forced-steered, mounted on turntables * Air-suspended with lift and lower valve * Axle toolkit Tires: * Tires 445/65 R 22.5 169 K Electrical system: * Electrical system in accordance with EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets * Connections according to standards. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Brake system: * Wabco brake system compliant with EU regulations, with EBS-E (4S3M), without connecting lines to the tractor unit Steel construction: * Steel construction made of high-strength fine-grain steels * Steel grades: S355J2+N/S355MC (yield point 355MPa), S690QL/S700MC (yield point 690MPa) Painting: * Complete steel structure automatically shot-blasted after welding using a shot-blasting machine * Secondary blasting with corundum for optimal adhesion of the coating system * Final painting with 2 coats of 2K topcoat, single color in RAL 1007 Narcissus Yellow according to RAL system 841GL * Rear section metallized and painted in RAL 9010 Pure White * Wheels in Silver Grey * Paint structure tested in salt spray test according to ISO 9227-NSS * Cavity sealing with special wax Including accessories: * Cargo area with approx. 30 mm thick hardwood floor * 2-inch king pin * One galvanized steel front wall (EN12642-XL), approx. 1,200 mm high * Yellow-red air couplings on the galvanized front connection strip * On the gooseneck and rear panel left and right, each with a bracket for warning signs including socket * Rear steering from the front and rear by cable remote control via push buttons, with single-track control of the axles (without installation in the tractor unit) * Electro-hydraulic unit * 12 pairs of stake pockets for approx. 100 x 50 mm stakes in the outer frame of the cargo area * Load manometer for determining axle loads including load diagram Codpfxjxttc As Adxjhd * Lift axle on the front axle, controlled by TEBS E * 5 pairs of crosswise stake pocket rails on the cargo area, for approx. 100 x 50 mm stakes * One INOX toolbox 1,200 x 460 x 550 mm mounted at the front left under the cargo area (in direction of travel) * 1 shunting coupling with reinforcement bolted to the rear cross member * BEKAMAX (Pico) automatic central lubrication system with standard grease NLGI-2 and removable pump guard * 2 LED reversing lights mounted on the rear panel * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum)

Condition: used, maximum load weight: 18,710 kg, overall weight: 24,000 kg, axle configuration: 3 axles, first registration: 12/2008, next inspection (TÜV): 03/2026, loading space length: 7,210 mm, loading space width: 2,480 mm, loading space height: 480 mm, total width: 2,550 mm, total height: 2,160 mm, Equipment: ABS, Meusburger 3-Axle Jumbo Trailer, aluminum side walls with 1x divided section (480 mm), reinforced front wall approx. 1900 mm, loading bed: (L) 6690 mm, rear slope: 520 mm, width: 2480 mm, loading height: approx. 960 mm, container locks suitable for 20-foot container, 4 heavy-duty lashing rings per side, 8 lashing eyes per side, 3 lashing brackets per side, length-adjustable drawbar, 2 drop-down supports at the rear, aluminum ramps approx. (LxW) 2400x470 mm, bracket for beacon at rear, extendable warning boards, BPW Eco axle(s), drum brake system, axle 2 is a lift axle, air suspension with lifting/lowering function. The vehicle may have advertising stickers and/or lettering. Our offer is generally without new TÜV approval. If new TÜV approval is required, we will gladly provide you with a quote from our partner workshops! The vehicle may have advertising stickers and/or lettering. Our general delivery and payment conditions apply. We are happy to provide you with a financing or leasing offer for this item. Please contact us! Cjdpfxoxp Tr Aj Adxehd

Condition: used, overall weight: 3,500 kg, first registration: 11/1998, total length: 8,800 mm, suspension: other, color: blue, Year of construction: 1998, mileage: 1,000 km, fuel type: gasoline, gearing type: other, driver cabin: other, construction height: 2,600 mm, emission class: none, Equipment: crane, no UVV/inspection The Albert Böcker trailer crane AHK 27/700 with HY1010 cable winch is a reliable and robust trailer-mounted crane, suitable for a wide range of lifting and transport tasks. Built in 1998, it has only 1,000 km of running distance, indicating it has seen careful use. The crane is presented in light blue and offers an impressive lifting capacity with a permissible gross weight of 3,500 kg. Chedpfxevkyklj Adxjd The crane's dimensions are 8,800 mm in length, 2,200 mm in width, and 2,600 mm in height, ensuring a compact yet efficient design. This size makes it particularly suitable for operations requiring flexibility and mobility. The condition of this used vehicle is good, making it an attractive option for various commercial applications. Delivery within Germany can be arranged for an additional charge. Prospective buyers can inspect the crane during the specified viewing times or request further information by phone or email. Sale exclusively to businesses (agriculture, freelancers, small and large enterprises) or for export. Subject to prior sale and errors excepted.

Condition: used, maximum load weight: 4,930 kg, overall weight: 6,500 kg, axle configuration: 2 axles, first registration: 03/2022, loading space length: 4,100 mm, loading space width: 1,990 mm, total width: 2,545 mm, total height: 2,850 mm, Errors and prior sale excepted! Internal number: 1457. 1083677 ---Please refer to the pictures for equipment and condition. ---The vehicle is in unprepared (original) condition! Nationwide delivery available at extra cost. Errors and prior sale reserved. We are happy to accept your vehicle as a trade-in. Chsdpewtvvnjfx Adxsd Financing / leasing also possible without down payment! Do you still have questions? We are happy to advise you!

Condition: used, maximum load weight: 12,100 kg, overall weight: 16,000 kg, axle configuration: 2 axles, first registration: 01/2011, next inspection (TÜV): 12/2024, loading space length: 7,400 mm, loading space width: 2,500 mm, Equipment: ABS, * ABS * Orange rotating beacon * Duomatic air connection Chodpfx Aevy Nw Todxod * 5-chamber rear lights * Front support winch * BPW ECO axles ----Structure: Open platform (loading height approx. 950 mm), hardwood floor, extendable by 1,685 mm at the rear, 4 extendable container locking pairs (Twist Lock), stainless steel storage boxes. Only sold to traders. ONLY THE NET PRICE IS PAYABLE FOR EXPORT !!!!! ALL INFORMATION IS PROVIDED WITHOUT GUARANTEE FOR EQUIPMENT + ACCESSORIES. Our general terms and conditions form the basis of all purchase contracts, invoices, pro forma invoices, orders and sales talks (see legal notice).

Condition: used, maximum load weight: 38,390 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 03/2024, next inspection (TÜV): 03/2026, total width: 2,540 mm, Equipment: ABS, You can find our complete range of vehicles, including immediately and short-term available units, on our website. Excerpt from the equipment list. Full specification available on request. - Loading platform in extendable design with pneumatically operated locking mechanism - 2 pairs of lashing rings (LC 5,000 daN) - 1 pair of lashing rings (LC 10,000 daN) - 6 pairs of outward-folding lashing rings (LC 5,000 daN) - 2 pairs of outward-folding lashing rings (LC 10,000 daN) - JOST mechanical landing legs with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load) - Tyres: 245/70 R 17.5 3PMSF - BPW axles and suspension - 2 rigid axles, 1 trailing steered axle - Air suspension with raise/lower valve - Brake system in compliance with EU regulations, EBS-E (2S2M) - Load gauge for axle load measurement, including load chart - 2-inch kingpin Chodexth Adspfx Adxjd - One galvanized steel front wall (EN12642-XL), approx. 1,600 mm high - Galvanized, extendable width extensions, approx. 230 mm per side - 6 pairs of WADER container pockets in the deck, suitable for 1x20' container, 2 x 20' containers, or 1 x 40' container flush at the rear - 10 pairs of stake pockets (approx. 100 x 50 mm) in the outer frame of the deck - 3 crosswise-mounted stake pocket rails (approx. 100 x 50 mm) on the deck - One transverse INOX toolbox under the loading platform, approx. 565 x 290 x 810 mm - Mount for ALU loading ramps, transversely under the platform behind the axles - Adjustable hanging rails for aluminium loading ramps at the rear of the vehicle - 2 LED reversing lights mounted on the rear panel - HRM metallic coating (High Resistance Metallisation) of the outer frame - Single-colour paint finish in RAL 3002 carmine red

Condition: used, axle configuration: 3 axles, first registration: 02/2018, loading space length: 6,060 mm, loading space width: 2,200 mm, loading space height: 300 mm, Subject to errors and prior sale! Internal number: 1448. EQUIPMENT * Platform trailer * 3 axles * Support wheel * AL-KO coupling * Planks all around ... and much more ----The vehicle is unprepared! Cjdpfxevwh U So Adxehd Nationwide delivery possible for an additional charge. Subject to errors and prior sale. We are happy to accept your vehicle as part payment. Financing/leasing also possible without a down payment! Do you have any questions? We are happy to advise you!

Condition: new, maximum load weight: 9,840 kg, overall weight: 13,500 kg, axle configuration: 2 axles, loading space length: 6,850 mm, loading space width: 2,480 mm, Equipment: ABS, You can find our complete vehicle stock with immediately and short-term available vehicles on our website. Excerpt from the equipment list. Complete specification available upon request. Chassis: * Steel welded construction with welded longitudinal beams and perforated Z-cross members * Tight cross member spacing for high floor load capacity * Ramp storage between the longitudinal beams behind the axle assembly * Two insertion pockets for one loading ramp each located below the loading floor, with closing plate in the rear end frame Front Support: * Support winch with single-side operation Drawbar Equipment: * Height-adjustable rigid drawbar with bolted towing eye approx. 40 mm according to DIN * Height adjustment +/- 150 mm Rear Support: * Two adjustable drop legs Running Gear: * 2 x 7 t air suspension axle assembly, make: SAF * Drum brakes approx. 300 x 150 mm * Wheel connection 10-hole, center-bolted for single tires * Total air suspension lift approx. 180 mm, of which lift approx. 150 mm and lower approx. 30 mm * Control via hand lever with latching function Tyres: * 4 x 285/70 R 19.5 – manufacturer at our discretion * On 8.25 x 19.5 steel rims, manufacturer at our discretion Splash Protection: * PVC mudguards in front of and behind the axles * In accordance with EU regulations with rear mudflaps Load Securing: * In the outer frame, a lashing rail for tension belts every approx. 200 mm, lashing force approx. 2.5 t * 6 pairs of foldable lashing rings evenly distributed, lashing force approx. 8,000 daN * Stake pockets for insert stakes 80/50 * 3 pairs of stake pockets in the outer frame, evenly distributed * 4 rows of stake pockets transverse to the loading area, evenly distributed Brake System: * Air brake system according to EU regulations with EBS and a red/yellow coupling head each on the connection plate at the drawbar * As a connection to the towing vehicle, a double-coil with 1 coupling head red/yellow and 1 duomatic coupling * Spring-actuated parking brake acting on one axle Floor: * Approx. 28 mm Z-hardwood floor inlaid in the outer frame * Wheel arch area with sheet metal covering * Floor capacity: forklift driveable up to approx. 5 tons Container Locks: * Container locks for 1 x 20 ft. container according to ISO 1496, EN 284 or EN 452-1 * Additional container locks for 1 x 10 ft. at the front according to ISO 1496, EN 284, or EN 452 Lighting: * Lighting system according to EU regulations, 24 Volt * Multi-chamber rear lights, license plate lights, side marker lights, and contour marker lights at the rear * Connection plate at the drawbar including connecting cable with 15-pin and 2 x 7-pin plugs Accessories included: * 1 plug-in rotating beacon at the rear with registration for continuous light * Additionally, with switch: 2 LED reversing lights at the rear on lamp bracket, operated via reverse gear * Side and rear welded forklift bump stops * 1 stainless steel toolbox each left and right behind the axles * 6 x 25 cm side boards (3 per side) and front/rear wall made of anodized aluminum hollow sections, approx. 600 mm high * Side boards foldable and removable, removable Kinnegrip stakes (internal width approx. 2,480 mm) * Sideboard/stake magazine at the front on the front wall * 1 additional mounting plate including parking sockets for air/electricity/EBS Painting: * Chassis hot-dip galvanized * Side boards RAL 9010 Pure White * Hubs KTL-Black * Rear underrun guard RAL 9010 White Codpfxexc Axxs Adxohd * Rims RAL 9006 Silver * Vario

Condition: new, maximum load weight: 36,370 kg, overall weight: 45,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our full vehicle inventory, including immediately and soon-available vehicles, on our website. Excerpt from the equipment. Full equipment details available on request. Load area: - Load area made of hardwood floor with rear chamfer, approx. 1,000 mm x 8° - 2 pairs of lashing rings (LC 5,000 daN) - 1 pair of lashing rings (LC 10,000 daN) - 6 pairs of fold-out lashing rings to the outside (LC 5,000 daN) - 2 pairs of fold-out lashing rings to the outside (LC 10,000 daN) - Cut-outs in the outer frame of the load area for hooking in tie-down straps (LC 2,000 daN) Landing legs: - JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: - BPW axles, air-suspended, with disc brakes (approx. 377 mm), with lift/lower function (ET 120) - Axle tools Tyres: - Tyres 435/50 R 19.5 TPMS: - TPMS tyre pressure monitoring system according to ECE R 141 Data transfer to the truck is via the standardised EBS interface according to ISO 11992. For correct display, the truck must be able to transmit and display this data. Brake system: - Wabco braking system compliant with EU regulations, with EBS-E (2S2M) and without connection lines to the tractor unit Steel structure: - Steel construction made of high-strength fine-grain steels Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Electrical system: - Electrical system in accordance with EU regulations - Lighting 24 Volt ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets as per ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: - Complete steel structure automatically shot-blasted after welding with blast wheel machine - Second blast treatment with corundum for optimum coating adhesion - HRM metallisation of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminium) for best corrosion protection - Final painting with 2 layers of 2K topcoat, single colour in RAL 3002 Carmine Red according to RAL system 841GL - Rear section metallised and painted in RAL 9010 (Pure White) - Paint build-up tested in salt spray test in accordance with ISO 9227-NSS - Sealing of cavities with special wax - Metallic paintwork not possible Including the following additional equipment: - Yellow-red air couplings on the galvanised front connection strip - 4 wheel chocks with holder Chjdpfjxq I Dvsx Adxed - 2-inch kingpin - Yellow reflector tape on the sides and rear of the trailer according to EU regulations - European reflector plates (red-yellow) on the rear of the trailer - Load area with heavy-duty hardwood floor - 1 spare wheel holder under the loading platform on the right side in the direction of travel - Galvanised drop-down supports under the chamfer of the loading area - 9 pairs of stanchion pockets for insertable stanchions, approx. 100 x 50 mm, in the outer frame of the loading area - One holder for a rotating beacon on the rear of the trailer - On the gooseneck and on the left and right rear panel, each with a bracket for warning signs including socket - One galvanised holder transversely under the loading area (approx. 2,400 x 640 x 165 mm) - One galvanised steel front wall (EN12642-XL), approx. 1,600 mm high - A layer of paint with sand on the central beam as anti-slip protection - 6 pairs of WADER container sockets fitted in the loading area, for 1x 20' container, 2x 20' containers or 1x 40' container - 3 pairs of transverse stanchion pocket rails moun

Condition: new, maximum load weight: 38,400 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our entire fleet of vehicles—including those available for immediate or short-term delivery—on our website. Extract from the equipment list. Complete equipment details available upon request. Chjdpsxl Nf Dsfx Adxod Cargo area: * Extendable cargo area with pneumatically operated locking mechanism * Cargo area with approx. 30 mm thick wooden floorboards * 7 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * Cut-outs in the outer frame of the cargo area for attaching tensioning straps (LC 2,000 daN) Landing gear: * JOST mechanical landing legs with 2-speed gearbox, 24t lifting capacity (50t test load) Tyres: * 385/65 R 22.5 tyres Axle: * BPW axles and suspension, all axles hydro-mechanically forced-steered * With disc brakes * Technical axle load: 10,000 kg (ET 0) * Air suspension with lift and lower valve Brake system: * WABCO brake system in accordance with EU regulations with EBS-E (2S2M), without connecting lines to the tractor unit Paintwork: * High-quality 2-component (2K) topcoat in single-tone RAL 3002 Carmine Red Accessories: * Steering from front and rear, operated via cable remote control with push buttons, with single-track axle monitoring (without installation in towing vehicle) * Electro-hydraulic power unit * 4 wheel chocks with holders on the front bulkhead * 2-inch king pin * Galvanised connection strip at the front with yellow-red air couplings * Mounting bracket for rotating beacon at the rear of the trailer * 10 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the cargo area * 1 spare wheel holder under the cargo area on the right-hand side (no spare wheel included) * Load gauge for determining axle loads, including load diagram Including special accessories: * Galvanised steel front wall (EN12642-XL), approx. 1,600 mm high * 6 pairs of WADER container pockets in the cargo area for 1 x 20' container, 2 x 20' containers or 1 x 40' container; additional locking point in the extension for a 45' container * 4 crosswise pairs of stake pocket rails mounted in the cargo area for plug-in stakes approx. 100 x 50 mm * Storage for up to 9 pairs of plug-in stakes, screwed to the inside of the front wall * Boarding ladder mounted left and right in the direction of travel * INOX toolbox approx. 1,200 x 460 x 550 mm, mounted at the front under the cargo area on the left in the direction of travel * Additional INOX toolbox approx. 1,200 x 460 x 550 mm, under the cargo area on the left in the direction of travel * Cargo area with approx. 30 mm thick wooden floorboards framed in omega profiles * Lift axle on the front axle with control via TEBS E * BEKAMAX (Pico) centralized lubrication system with standard grease NLGI-2 * 2 LED reversing lights mounted on the rear panel * 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear * HRM Metallisation (High Resistance Metallisation)

Condition: used, maximum load weight: 37,535 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 08/2024, next inspection (TÜV): 08/2026, total width: 2,540 mm, Equipment: ABS, You can find our entire vehicle inventory, including immediately and soon-available vehicles, on our website. The following is an excerpt from the equipment specification. Full equipment details available on request. Loading Platform: * Extendable loading platform with pneumatically operated locking mechanism * 7 pairs of fold-out lashing rings (LC 5,000 daN) * 3 pairs of fold-out lashing rings (LC 10,000 daN) * Cut-outs in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles, air-suspended, with disc brakes (approx. 430 mm), fitted with lift/lower function. Technical axle load: 10,000 kg each (ET0) * Self-steering axle with electromagnetic reverse lock, activated via reverse gear or manually * Axle tool Tyres: * Tyres 385/65 R 22.5 Brake System: * Brake system compliant with EU regulations with EBS-E (2S2M), without connecting lines to tractor unit Steel Construction: * Steel construction made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Chsdpfx Asxgk U Nsdxod Paintwork: * Premium and durable corrosion protection of the standard shot-blasted welded frame by a two-component (2K) zinc dust primer * High-quality single-color topcoat (2K) in RAL 3002 carmine red * Rims in silver * Rear section metallised and painted in RAL 9010 (pure white) Including the following additional equipment: * Yellow-red air couplings on galvanised front connector bar * 4 wheel chocks with holders * 2" king pin * Yellow reflective tape compliant with EU-standard on sides, extension and trailer rear * European reflector boards (red-yellow) on rear of trailer * Loading platform with approx. 30 mm thick wooden floor encased in Omega profiles * 10 pairs of stake pockets for insertable stanchions approx. 100 x 50 mm in the outer frame of the loading platform * Storage for up to 9 pairs of insertable stanchions approx. 100 x 50 mm bolted to the inside of the front wall * 1 spare wheel holder under the loading platform on the left in the driving direction, without spare wheel * One mudflap at the rear of the trailer * Manual and documentation on USB stick * Bracket for rotating beacon at the rear of the trailer * On gooseneck and rear panel, left and right, one holder each for warning signs, including socket * Speed stickers 80 km/h, rear and both sides * Load gauge for axle load determination including load chart * Galvanised steel front wall (EN12642-XL), approx. 1,600 mm high * 6 pairs of WADER container pockets on loading platform, for 1x 20' container, 2x 20' containers or 1x 40' container flush with the rear * INOX toolbox, approx. 600 x 350 x 600 mm, under the platform on the left in the driving direction * 4 pairs of longitudinal stake pocket rails for 80 x 50 mm insertable stanchions mounted on the loading platform * Lift axle on the front axle with control via TEBS E depending on current axle load and loading condition * 2 LED reversing lights mounted on rear panel * HRM metallisation (High Resistance Metallisation)

Condition: used, maximum load weight: 38,080 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 02/2025, next inspection (TÜV): 02/2026, total width: 2,540 mm, Equipment: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website. Excerpt from the equipment list. Full specifications available upon request. Loading Platform: * Extending loading platform with pneumatically operated locking mechanism * Loading platform with approx. 30 mm thick wooden floor framed in omega profiles * 7 pairs of folding external lashing rings (LC 5,000 daN) * 3 pairs of folding external lashing rings (LC 10,000 daN) * Cut-outs in the outer frame of the platform for attaching tension belts (LC 2,000 daN) Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension * All axles hydro-mechanically forced-steered * Equipped with disc brakes * Technical axle load: 10,000 kg each (ET 0) * Air suspension with lift and lower valve * Axle tools Tyres: * Tyres: 385/65 R 22.5 Cedpfx Adoxf Sifsxshd Braking System: * Braking system according to EU regulations with EBS-E (2S2M), without connecting lines to the tractor Warning Signs: * Mountings on the gooseneck and rear panel left and right for warning signs, including socket Electrical System: * Electrical system according to EU regulations * Lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX on the front connection strip with sockets 24N, 24S & 15-pin, connection according to ISO 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Steel Construction: * Steel structure made of high-strength fine-grained steels * Steel grades S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: * First-class, durable corrosion protection for the standard grit-blasted welded frame, guaranteed by a two-component zinc dust primer * High-quality, single-colour two-component topcoat in RAL 3002 carmine red * Rims in silver, add-on parts as per manufacturer's choice * Rear section metallized and painted in RAL 9010 pure white Included Accessories: * 2-inch kingpin * 4 wheel chocks with brackets on the front wall * Remote steering, front and rear, cable-operated by push buttons, with single-track control of the axles (without installation in the tractor) * Manual and description on USB stick * Electro-hydraulic unit * Galvanized connection strip at front, yellow-red air couplings * Yellow reflective tape according to EU regulations on the sides, extension and rear of the trailer * European reflective panels (red-yellow) on the rear of the trailer * One mud flap at the rear of the trailer * Mounting for rotating beacon at the rear of the trailer * 10 pairs of pocket sockets for plug-in stanchions 100 x 50 mm in the outer frame of the loading platform * 1 spare wheel holder under the platform on the right-hand side * Speed stickers 80 km/h on the rear and on both sides * Load manometer for determining axle loads including load chart * Galvanized steel front wall (EN12642-XL), approx. 1,600 mm high * 6 pairs of WADER container pockets in the platform for: 1 x 20' container, 2 x 20' container or 1 x 40' container; an additional locking point is provided in the extension for a 45' container * 4 pairs of transverse stanchion strip pockets for plug-in stanchions approx. 100 x 50 mm * Storage for plug-in stanchions on the inside of the front wall * Access ladder installed on both left and right side in the direction of travel * One INOX toolbox, approx. 1,200 x 460 x 550 mm, mounted under the loading platform at the front left in the direction of travel * One add

Condition: new, maximum load weight: 38,400 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the specifications. Full specification available on request. Loading area: * Extendable loading platform with pneumatically operated locking mechanism * Loading area with approx. 30 mm thick wooden planks * 7 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * Cut-outs in the outer frame of the platform for hooking in tension straps (LC 2,000 daN) Landing legs: * JOST mechanical landing legs with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load) Tyres: * Tyres: 385/65 R 22.5, manufacturer at our discretion * TPMS tyre pressure monitoring system in accordance with ECE R 141. Data transmission to the truck is via the standardized EBS interface as per ISO 11992. For proper display, the truck must be capable of receiving and showing this data. Axle: * BPW axles and suspension * All axles hydromechanically forced-steered * Disc brakes * Technical axle load: 10,000 kg each (offset 0) * Air suspension with raise/lower valve * Axle tools Brake system: * WABCO brake system in accordance with EU regulations, EBS-E (2S2M) without connection lines to the tractor unit Steel construction: * High-strength fine-grain steel construction * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: * Electrical system in accordance with EU regulations * LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash together with indicators * ASPÖCK-UNIBOX at the front connection bar with 24N, 24S, and 15-pin sockets according to ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * Complete steel structure automatically shot-blasted after welding * Second blasting with corundum for optimal coating adhesion * Final painting with two coats of 2-component topcoat, single color, RAL 3002 Carmine Red according to RAL system 841GL * Rims in silver grey * Rear section metallized and painted RAL 9010 (Pure White) * Metallic paint not available * Paint finish tested in salt spray test according to ISO 9227-NSS * Cavity sealing with special wax Chodsw Tpr Iepfx Adxsd Accessories: * Remote steering from front and rear via cable remote control with push buttons, with axle tracking monitoring (without installation in the tractor unit) * Electro-hydraulic unit * 4 wheel chocks with holders on the front wall * 2" kingpin * Yellow-red air couplings at the galvanized front connection bar * At gooseneck and rear, left and right, brackets for warning panels, including sockets * 10 pairs of stake pockets for approx. 100 x 50 mm plug-in stakes in the external frame of the loading platform * One galvanized steel front wall (EN12642-XL), approx. 1,600 mm high * 6 pairs of WADER container pockets in the loading area, for 1 x 20' container, 2 x 20' containers, or 1 x 40' container; an additional locking position is provided in the extension for a 45' container * 4 pairs of transverse stake pocket strips in the loading area for approx. 100 x 50 mm plug-in stakes * Storage for max. 9 pairs of plug-in stakes bolted inside to the front wall * Boarding ladder mounted left and right in the direction of travel * One INOX toolbox, approx. 1,200 x 460 x 550 mm, mounted front left under the loading platform * An additional INOX toolbox, approx. 1,200 x 46...

Condition: new, maximum load weight: 61,050 kg, overall weight: 73,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately or at short notice, on our website. Excerpt from the equipment. Full equipment list available upon request. Loading Platform: * Loading platform with approx. 30 mm thick hardwood floor * 10 pairs of folding external lashing rings (LC 10,000 daN) Landing Legs: * JOST landing legs (mechanical) with two-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles and Suspension: * BPW axles, technically rated at 12,000 kg each * 1st axle steered, 2nd axle fixed, all other axles hydro-mechanically forced steered, mounted on turntable * Air suspension with raise/lower valve * Axle tools Tyres: * Tyres 445/65 R 22.5 169K – manufacturer of our choice TPMS * TPMS tyre pressure monitoring system according to ECE R 141 * Data transmission to tractor unit via standardised EBS interface according to ISO 11992 * For correct display, the tractor unit must be able to process and display this data Brake System: * Wabco brake system as per EU regulations with EBS-E (4S/3M) without connecting lines to the tractor unit Electrical System: * Electrical system in accordance with EU regulations * Lighting 24V ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX at the front connection rail with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Steel Structure: * Steel construction made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Paintwork: * Entire steel construction automatically blasted after welding using a shot-blasting machine * Second blasting with corundum for optimal coating adhesion * HRM metallisation of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminium) to ensure optimal corrosion protection * Final coating with 2 layers of 2K topcoat, single color in RAL 3002 Carmine Red as per RAL System 841GL * Rear section metallised and painted in RAL 9010 (Pure White) * Rims in silver grey * Paint system tested by salt spray test according to ISO 9227-NSS * Cavities sealed with special wax * Metallic paint finish not possible Including the following accessories: * Loading platform with approx. 30 mm thick hardwood floor * 2-inch kingpin * One galvanized steel front wall (EN12642-XL), approx. 1,200 mm high * Yellow-red air couplings on the galvanized front connection rail * Storage for approx. 1,000 mm long insertable stanchions in the rear central beam * At the gooseneck and rear plate, left and right, one bracket each for warning signs including socket * Remote steering from front and rear via cable remote control with push-buttons, with single-track monitoring of the axles (no installation in the tractor unit) * Electro-hydraulic unit * 13 pairs of stanchion pockets for insertable stanchions approx. 100 x 50 mm in the outer frame of the loading platform * Lift axle on 1st and 2nd axle with control via TEBS E depending on current axle load and loading status * 7 pairs of galvanized insertable stanchions, approx. 100 x 50 mm, approx. 1,000 mm high * 5 pairs of crosswise stanchion pocket strips mounted on the loading platform for stanchions approx. 100 x 50 mm * 2 pairs of WADER container pockets in the loading platform, for 1x10' Cjdjw Tpr Uepfx Adxjhd * 1 shunting coupling with reinforcement bolted to the rear crossmember * Central lubrication system BEKAMAX (Pico) with standard grease NLGI-2

Condition: new, maximum load weight: 36,245 kg, overall weight: 45,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. The full list of features is available upon request. Loading Platform: * Hardwood loading platform with rear bevel approx. 1,000 mm x 8° * 2 pairs of lashing rings (LC 5,000 daN) * 1 pair of lashing rings (LC 10,000 daN) * 6 pairs of outward-folding lashing rings (LC 5,000 daN) * 2 pairs of outward-folding lashing rings (LC 10,000 daN) * Cut-outs in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles, air-suspended * Disc brakes (approx. 377 mm) * Lift/lower function (ET 120) * Axle tool kit Tyres: * 435/50 R 19.5 tyres – brand at our discretion * TPMS tyre pressure monitoring system according to ECE R 141. Data transfer to the tractor unit occurs via standardized EBS interface according to ISO 11992. For correct display, the tractor unit must be capable of transmitting and displaying this data. Braking System: * Wabco braking system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Steel Structure: * Steel construction made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa); S690QL/S700MC (yield strength 690 MPa) Electrical System: * Electrical system according to EU regulations * 24V ASPÖCK-NORDIK lighting (ASS3) * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX on the front connection bar with 24N, 24S, & 15-pin sockets according to ISO; 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Painting: * Complete steel structure blasted automatically with a shot blasting machine after welding * Second blasting with corundum for optimal coating adhesion * HRM-metallization of the entire chassis with ZINACOR 850 (85% zinc/15% aluminum) for maximum corrosion protection * Final painting with 2 coats of 2K finish paint, single color in RAL 3002 Carmine Red according to RAL system 841GL * Rear section metallized and painted in RAL 9010 (Pure White) * Paint system tested in salt spray test according to ISO 9227-NSS * Cavities sealed with special wax * Metallic paint not possible Chedpfx Adsw Tpqqjxod Including the following additional equipment: * Yellow-red air couplings on the galvanized front connection bar * 4 wheel chocks with holders * 2" kingpin * Loading platform with heavy-duty hardwood floor * 1 spare wheel holder under the loading platform, right-hand side in the direction of travel * Galvanized folding supports under the loading platform's beveled section * 9 pairs of stanchion sockets for plug-in stanchions, approx. 100 x 50 mm, in the outer frame of the platform * One galvanized steel front wall (EN12642-XL), approx. 1,600 mm high * Anti-slip painted sand layer on the central beam * 1 INOX toolbox transversely mounted under the platform, approx. 1,000 x 400 x 2,500 mm * 6 pairs of WADER container pockets in the floor for 1x 20' container, 2x 20' containers or 1x 40' container * 3 pairs of crosswise stanchion socket strips in the platform for plug-in stanchions approx. 100 x 50 mm * Storage for max. 9 pairs plug-in stanchions, approx. 100 x 50 mm, bolted to inner front wall * 2 INOX toolboxes under the platform left and right, approx. 600 x 350 x 600 mm * Holder for aluminium loading ramps, transverse under the pla

Condition: used, maximum load weight: 15,950 kg, overall weight: 20,500 kg, axle configuration: 2 axles, first registration: 10/2018, next inspection (TÜV): 05/2026, loading space width: 2,480 mm, total width: 2,550 mm, Equipment: ABS, You can find our complete range of vehicles, including those available immediately and at short notice, on our website. Excerpt from the equipment list. Full equipment details available on request. - SAF axles - Technical axle load: 10,000 kg each - Air suspension with lift and lower valve - Brake system with EBS - Tyres: 265/55 R19.5 - Ramp holder - Mechanically adjustable drawbar for length, 6 x approx. 100 mm - 40 mm towing eye, interchangeable for 50 mm - 3 pairs of stanchion pockets in the outer frame Csdpfxewtv Hms Adxehd - 4 rows of stanchion pockets crosswise to the loading area - Widenable container locks for 1x20' - Rear extension - Side boards - 4 x stainless steel toolboxes - Single-color paint finish in RAL 3002 carmine red

Condition: new, maximum load weight: 34,660 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete stock of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment. Full equipment details available upon request. Loading Platform * Double extendable version with pneumatically operated locking mechanism * 2 pairs of recessed lashing rings (LC 5,000 daN) * 1 pair of recessed lashing rings (LC 10,000 daN) * 7 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * Cut-outs in the outer frame of the loading platform for hooking in tension belts (LC 2,000 daN) Landing Legs * JOST landing legs (mechanical) with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load) Tyres * 235/75 R 17.5 3PMSF Axles * BPW axles hydro-mechanically forced steered * Air suspension with lift and lower valve Braking System * According to EU regulations, with EBS-E (2S2M), without connection lines to the tractor unit Steel Construction * Made of high-strength fine-grain steels. Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork * Premium and durable corrosion protection for the standard shot-blasted welded frame provided by a 2-component (2K) zinc-rich primer * High-quality 2-component (2K) top coat, single color in RAL 3002 carmine red * Rear section metallized and painted in RAL 9010 (pure white) * Rims in silver Including Accessories * Remote steering from front and rear via cable remote control with push buttons, with single-track control (no installation in tractor unit) * Electro-hydraulic power unit * 4 wheel chocks with holder mounted on the front wall * 2-inch kingpin * Yellow-red air couplings on the galvanized connection strip at the front * Yellow reflective tape according to EU regulations on the sides, extension, and rear of the trailer Chsdok Ugacspfx Adxed * European reflective signs (red-yellow) on the trailer's rear * One mudflap on the trailer's rear * Manual and instructions on USB stick * Loading platform with robust hardwood floor * 10 pairs of stake pockets for 100 x 50 mm plug-in stakes on the outer frame of the loading platform * Mounting bracket for a revolving beacon on the trailer's rear * Galvanized supports under the inclined section of the loading platform * Mounting bracket for a revolving beacon on the trailer's rear * Hook-in rail for ALU access ramps at the rear of the vehicle * 80 km/h speed stickers on the rear and both sides * Load gauge for determining axle loads including load chart * One galvanized steel front wall (EN12642-XL), approx. 1,600 mm high * Central lubrication system with 2 BEKAMAX (Pico) pumps with standard grease NLGI-2 and removable pump protection cover * Spiral cable supplying the electro-hydraulic unit and/or the electric winch (approx. 35 mm², approx. 3.5 m long, max. 250 A) between trailer and tractor unit with connector (NATO-NATO) * Coated sand layer on the central beam as anti-slip protection * 6 pairs of WADER container pockets in the loading platform, for 1 x 20' container, 2 x 20' containers or 1 x 40' container, an additional locking point is provided in the extension for a 45' container * 5 pairs of crosswise stake pocket rails mounted in the loading platform, for 100 x 50 mm plug-in stakes * Storage for up to 9 pairs of plug-in stakes, approx. 100x50 mm, inside on the front wall * One INOX toolbox, approx. 1,500 x 390 x 810 mm, mounted under the loading platform left and right in the direction of trav

Condition: used, axle configuration: 3 axles, first registration: 11/2006, suspension: air, tire size: 445/45 R19.5, color: other, Year of construction: 2006, Axle configuration Tyre size: 445/45 R19.5 Axle make: SAF Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Tyre tread left: 7 mm; Tyre tread right: 4 mm Rear axle 2: Tyre tread left: 8 mm; Tyre tread right: 8 mm Rear axle 3: Tyre tread left: 8 mm; Tyre tread right: 10 mm Weights Unladen weight: 7,910 kg Payload: 31,090 kg Gross vehicle weight: 39,000 kg Chsdpoxtyqmsfx Adxsd Condition Damage: none

Condition: good (used), axle configuration: > 3 axles, loading space length: 12,400 mm, loading space width: 2,450 mm, loading space height: 1,530 mm, total length: 12,400 mm, total width: 2,450 mm, total height: 1,530 mm, suspension: air, tire size: 445/ 65 R22.5 | Load index 169K, color: red, Year of construction: 2025, Colour: Red Payload: 71,000 kg Main Features Manufacturer: MAX Type: MAX410 Flatdeck Trailer / MAX410-NZ-5 VIN: YAMT45XX9S0110471 Year of manufacture: 2025 Weights / Load Capacity King pin load: 23,000 kg Axle load: 5 x 12,000 kg = 60,000 kg Total axle load: 60,000 kg Gross vehicle weight (GVW): 83,000 kg Unladen weight: approx. 12,000 kg Axles Axle brand: BPW 1st axle friction steered, 2nd axle fixed, all subsequent axles hydro-mechanically steered Pneumatic suspension with lift/lower valve WABCO braking system Tyres: 445/65 R22.5 | Load index 169K Dimensions Overall length: 12,400 mm Codpfxoxhf U Ho Adxshd Loading platform width: 2,540 mm Height: approx. 1,530 mm King pin height: approx. 1,340–1,400 mm Additional Information NATO plug Lashing rings Stake pockets Wheel chocks Wooden loading floor Mechanical landing gear Electro-hydraulic pump for trailer functions Cable remote control Rear underrun bumper with lights King pin 2.0” + additional 3.0″ Central lubrication system with 2 BEKAMAX pumps Payload: 71,000 kg = Further Information = General Information Year of manufacture: 2025 Axle Configuration Tyre size: 445/65 R22.5 | Load index 169K Axle brand: BPW Suspension: Air suspension Rear axle 1: Max. axle load: 12,000 kg; steering Rear axle 2: Max. axle load: 12,000 kg Rear axle 3: Max. axle load: 12,000 kg; steering Rear axle 4: Max. axle load: 12,000 kg; steering Rear axle 5: Max. axle load: 12,000 kg; steering Weights Unladen weight: 12,000 kg Payload: 71,000 kg Gross vehicle weight: 83,000 kg Condition Technical condition: good Optical condition: good Financial Information Price: On request Further Information Please contact Stefan Schaapveld for more information.

Condition: excellent (used), axle configuration: 2 axles, first registration: 07/2012, loading space length: 12,250 mm, loading space width: 2,440 mm, loading space height: 1,400 mm, suspension: air, tire size: 275/70/22.5, wheelbase: 9,400 mm, color: silver, Year of construction: 2012, Equipment: ABS, = Additional Options and Equipment = - Air suspension = Further Information = Axle configuration Tire size: 275/70/22.5 Axle brand: SAF Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Dual tires; Max. axle load: 10,000 kg; Steering Rear axle 2: Dual tires; Max. axle load: 10,000 kg; Steering Dimensions Dimensions (L x W): 1254 x 255 cm Weights Empty weight: 8,610 kg Payload: 29,390 kg Gross vehicle weight: 38,000 kg Condition Technical condition: very good Visual condition: very good Identification License plate: OL-50-SR WEB TRAILER 2-AXLE OPEN PLATFORM TRAILER Codpfx Aev Sbn Uedxjhd SAF AXLES DISC BRAKES AIR SUSPENSION STEERING AXLE LOADING PLATFORM HEIGHT +/- 135 CM INTERNAL DIMENSIONS L=1225 W=244 ALUMINUM BOARDS 60M REVERSING CAMERA STROBE LIGHT

Condition: ready for operation (used), functionality: fully functional, empty load weight: 2,580 kg, maximum load weight: 32,000 kg, loading space length: 3,000 mm, loading space width: 2,500 mm, loading space height: 720 mm, loading space volume: 7.5 m³, Year of construction: 2009, Platform transport trolley Brand: Plan Type: 70-4 Dimensions platform: 3000X2500/H720 mm Load capacity: 32000 kg Total dimensions: 5100x2500/H 720 MM Year of construction: 2009 Own weight: 2580kg This trolley is double steered and has double full rubber wheels with metal rims. The triangle is removable and can also be hung on the other side of the trolley. Chsdjwarxxjpfx Adxod The floor is fitted with a thick iron tear plate.

Condition: new, empty load weight: 614 kg, maximum load weight: 2,886 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 2,800 mm, loading space width: 1,300 mm, loading space height: 200 mm, loading space volume: 0.7 m³, color: silver, construction height: 1,970 mm, working width: 1,790 mm, Automatic reverse drive, hot-dip galvanizing, extremely sturdy superstructure, perforated lashing floor, LED lighting, e-wheel, bucket storage, * IMMEDIATELY AVAILABLE * extremely sturdy superstructure / perforated lashing floor / LED lighting / e-wheel / bucket storage TECHNICAL DATA - Make: Brian James - Model: Digger Plant 2 - Vehicle type: Construction machinery - Vehicle condition: New vehicle - Initial registration: Without initial registration - TÜV/HU: 2 years from initial registration - Internal dimensions (LxWxH): 280 x 130 x 20 cm - External dimensions (LxWxH): 465 x 179 x 197 cm - Loading height of floor: 38 cm - Perm. Gross weight: 3,500 kg - Unladen weight: 614 kg - Payload: 2.886 kg - Chassis: Low loader (wheels next to the body) - Tyres: 165R13C - Chassis: ALKO rubber spring axle - Support wheel: Yes - 100 km/h approval: Optional, can be retrofitted DESCRIPTION - Robust steel mudguards with non-slip perforated profile - Reinforced perforated steel floor inside on the side - 18 mm screen-printed wooden floor in the middle, non-slip and waterproof - Very sturdy welded steel frame - Frame completely hot-dip galvanized - Chassis: Steel frame with anti-slip profile hot-dip galvanized - chassis with two additional longitudinal beams under the loading area - perforated steel single ramps, galvanized steel, adjustable, L=1.62m - stable ACME locking system: closes silently, loading ramps are held in place by safety clamp locks, Rubber buffer dampens noise - Very low chassis for low drive-on angle - Excavator bucket storage - 10x lashing eyelets on the dropside (1000dAN/kg) TÜV certified - Free choice of lashing points for lashing in the perforated steel floor - Maintenance-free axles and damping systems designed for long journeys and heavy loads - Spare wheel mounted on the side wall for easy access - Automatic reverse drive - ALKO overrun device and parking brake - Cast steel coupling head with integrated ALKO high-security lock - Very sturdy V-drawbar RENFORCED - 13-pin plug - Complete LED lighting system Plug - Complete LED lighting: Extremely bright, durable and reliable. - Reversing lights - Integrated rear fog light - Robust protection for rear lights - Heavy-duty support wheel - 5-year chassis warranty Accessories can be retrofitted - please enquire! - TracStrap load securing system - excavator bucket cage - lashing straps - storage box - winch - and much more New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Cedpfeu Hrg Ujx Adxohd

Condition: excellent (used), axle configuration: 2 axles, first registration: 08/2012, loading space length: 12,250 mm, loading space width: 2,440 mm, loading space height: 1,400 mm, suspension: air, tire size: 275/70/22.5, wheelbase: 9,450 mm, color: silver, Year of construction: 2012, Equipment: ABS, = Additional Options and Accessories = - Air suspension Chsdpfx Aev Sbnnjdxod = Further Information = Axle configuration Tire size: 275/70/22.5 Axle make: SAF Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Twin tires; Max. axle load: 10,000 kg; Steering axle Rear axle 2: Twin tires; Max. axle load: 10,000 kg; Steering axle Dimensions Dimensions (L x W): 1254 x 255 cm Weights Unladen weight: 8,480 kg Payload: 29,520 kg Gross vehicle weight: 38,000 kg Condition Technical condition: very good Optical condition: very good Identification Registration number: OL-14-SP WEB TRAILER, 2-AXLE, OPEN BODY TRAILER SAF axles Disc brakes Air suspension Steering axle Loading platform height +/- 135 cm Internal dimensions L=1225 W=244 Aluminum sideboards 60 cm Rear-view camera Strobe light