Used Flash Butt Welding Machine for sale (65,329)

Condition: used, Spot welding machine, projection welding machine DALEX type PL 63 Serial No. N-0051390 Year of manufacture 2018 Output at 50% duty cycle: 63 kVA Output at 100% duty cycle: 44.5 kVA Maximum welding power: 182 kVA Rated welding current: 8.77 kA Throat depth: 250 - 550 mm Maximum arm spacing: 150 to (310 mm) Upper electrode arm diameter: 50 mm Lower electrode arm diameter: 60 mm Electrode holder diameter: 25 mm Electrode stroke max.: 65 mm Electrode force: 100 - 600 daN Operating air pressure: 1 to 6 bar Power supply: 400 Volt, 50 Hz Nwodpfx Adjycv Sajboc Rated current: 158 A Connected load: 137 kVA - Thyristor power stage - Welding control HARMS+WENDE - HWH MPS 10β - 5-stage control, single spot, series spot, 8 programs - Electrode force infinitely adjustable via air pressure - Parallel electrode guidance - Single-stroke welding cylinder - Water-cooled via external water cooling system (recirculating water cooler not included) - Electric foot switch - Control cabinet with controller fixed to machine - Operating manual Required space (L x W x H): 1150 x 700 x 1600 mm Weight: 335 kg As-new condition

Condition: good (used), Bosch Diffusion Welding Machine The system described here was designed for the following use: Diffusion welding machine for connecting the armature lead to the commutator of a starter armature using diffusion welding. Diffusion welding unit (also known as polymer diffusion welding unit, diffusion welding, copper soft welding unit, copper strip welding unit), consisting of a main machine and control system, PLC control, touchscreen operation. Process Description Nwedpfx Adjg Icfpobec The workpiece carrier enters the station and is lifted. The alignment gripper picks up the armature from the workpiece carrier and aligns it according to the welding position. The loading gripper picks up the armature and places it in the welding chuck. The welding chuck moves with the armature into the welding position. The contacting unit and welding cylinder move together, and the first weld is performed. This process is repeated until the armature is completely welded. The welding chuck moves with the anchor into the transfer position, and the unloading gripper picks up the anchor and places it on the raised workpiece carrier. The workpiece carrier is lowered. Workpiece carriers with OK anchors continue on the conveyor system; NIO anchors are sent to the removal conveyor. At a welding machine, the OK anchors are marked with a color on the end face of the commutators using a stamping station. This allows for identification during the final inspection of which welding machine produced the anchor. ... Technical Data: Diffusion Welding Machine Energy Data: Frequency: 50 Hz Rated Power: approx. 11 kW Operating Voltage: 400 V / 3P Control Voltage: 24 V Rated Current: 20 A Fuse: 35 A Water: Inlet pressure 4 bar, 15-23 °C, approx. 25 l/min Compressed Air, oil-free: min. 5 bar Temperature: 1000 °C at the tungsten electrodes Machine Dimensions without Control Cabinet Depth: 1800 mm Width: 3100 mm Height: 2700 mm Weight: 3000 kg Year of Manufacture: 2016 Financing through our bank is also possible. komplett-konzept.leasingo.de Further items – new and used – can be found in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, type of input current: AC, pressure: 7 bar, Complete system consisting of 3 units of AKS 6400 4-head welding machines and 2 units of AKS 6600 4-head welding machines plus 2 units of SV 800/4 CNC weld seam finishing machines, including chip extraction system. Nsdpjw Etv Aefx Adbowc

Year of construction: 2007, condition: ready for operation (used), A 4-head welding machine Rotox for window construction is available. Profile height range: 30mm-125mm, max. profile width: 140mm, min. welding length with/without gasket forming unit: 320mm/430mm, max. welding length without/with gasket forming unit: 4000mm/4000mm, min. welding width without/with gasket forming unit: 430mm/500mm, max. welding width without/with gasket forming unit: 3500mm/3500mm, welding bead limitation: 0.2mm-2mm, material: uPVC hollow bar profiles, weight: approx. 3100kg. Documentation available. On-site inspection possible. Expected to be available from the end of 2026. Nsdpfx Adsxvru Njbswc

Year of construction: 2018, condition: ready for operation (used), Fröhlich SAX 700 corner seam welding machine, welding process: MIG/MAG/WIG, max. weld seam length: 700mm, max. welding angle: 180°, welding speed: 2500mm/min, material thicknesses: 0.8mm-6mm, materials: steel/stainless steel, machine dimensions X/Y/Z: approx. 800mm/1000mm/1800mm. Migatronic Automig 273i welding machine, fuse: 10A, max. power consumption: 9.1kVA, no-load power: 20W, efficiency: 88%, power factor: 0.93, current range: 10A-270A, machine dimensions X/Y/Z: approx. 550mm/250mm/650mm, weight: approx. 30kg. Documentation available. On-site inspection is possible. Nsdpfxju Izq So Adbswc

Year of construction: 2013, condition: ready for operation (used), A resistance spot welding machine Pei is available. Rated power at 50%: 35kVA, secondary short-circuit current: 19kA, max. welding current: 15.2kA, secondary continuous current: 4.8kA, secondary voltage: 5.3V, electrode force: 180daN, arm spacing range: 140mm-350mm, arm reach: 430mm, arm diameter: 50mm, electrode stroke: 60mm, weight: approx. 280kg. Documentation vorhanden. An on-site inspection is possible. Nodpjx A Hhkefx Adbewc

Condition: ready for operation (used), A welding machine Pfaff including a rotary shear Kuris and an unwinding device MK is available. 1) Welding machine Pfaff 8309. 2) Rotary shear Kuris BOM 101. 3) Unwinding device MK Sewing Technology Systems. Documentation available. An on-site inspection is possible. The system is dismantled and ready for loading. Nwedpfx Adow I E Diebjc

Condition: ready for operation (used), Year of construction: 2020, Longitudinal sealing: continuous, photo cells: horizontal/vertical, working height range: 760mm-960mm, max. transport speed: 30m/min, film core diameter: 76mm, max. film roll diameter: 350mm, max. film roll width: 650mm, sealing stamp width: 300mm, product width range: 50mm-410mm, product height range: 1mm-250mm, min. product length: 50mm, film thickness range: 7µm-80µm, max. output rate: 85cycles/min, materials: POF/PE/PVC/PLA/bio films. Machine dimensions X/Y/Z: approx. 2200mm/1700mm/1800mm, weight: approx. 800kg. Documentation available. An on-site inspection is possible. Nsdpsxuvnqofx Adbowc

Year of construction: 2021, condition: ready for operation (used), 20 identical welding machines are available. Type: cool41 U31, standard: IEC 60974-1, -2, -10 C.L.A, mains voltage: 400V, frequency: 50/60Hz, protection class: IP23, power consumption P min: 0.9kW, cooling capacity P max: 0.35MPa (3.5bar), max. current consumption: 2.5A, length: 539mm, width: 210mm, height: 415mm, weight: 22kg. Control: Comfort 2.0 with intuitive operation via click wheel, pulse spot normal mode continuously adjustable (especially for TIG welding), pulse pause ratio (balance) adjustable for example from 10-90%, Hz and kHz pulses up to approx. 15kHz, ActivArc technology dynamic arc control to ensure constant performance despite distance fluctuations and to prevent electrode sticking, improved root and penetration quality, spotArc Spotmatic functions for spot welding and tacking, 2-stroke and 4-stroke mode depending on torch trigger operation, manual metal arc welding often with MMA pulse automatic also integrated, gas pre-flow and post-flow times adjustable, upslope and downslope times also controllable, torch modes via torch trigger such as reduced secondary current, memory and job storage recurring welding tasks can be saved depending on version approx. 8-100 jobs, energy efficiency high efficiency, standby function available. Remote control and interfaces remote adjusters and functional torches can be connected, optional LAN WiFi gateway ewm Xnet, PC interfaces for parameter setting and monitoring. Very little used. An on-site inspection is possible. Nwodpoxdc Upofx Adbjc

Condition: ready for operation (used), A total of 18 welding machines are available. 1-9) Welding machine ESS MIG-MAG 311, functional: 3, defective: 2, unclear: 4. Including wire feeder DVK-13 and partly hose package. 10) Welding machine Migatronic MTE 320. Including wire feeder CTU 3000. The hose package is defective. 11) Welding machine Merkle W420 AC/DC TIG Insquare, welding process: TIG, material: aluminum. 12) Welding machine EWM MIG 450 puls. Including wire feeder. 13) Welding machine WIG L-TEC TIG 404 AC/DC. 14) Welding machine Cloos GLC 450 N. Including wire feeder and hose package. 15) Welding machine Oerlikon CPGL 454. Including wire feeder VCW 454 and hose package. 16) Welding machine Stel HI-MIG 500P. Including hose package. 17) Plasma cutting machine Plasma 125. Including hose package. 18) Welding machine Merkle MIG/MAG M 325 DW. Including wire feeder DV30. Documentation available. An on-site inspection is possible. Nwedpfxoxhntxe Adbec

Year of construction: 2012, condition: ready for operation (used), A Dalex welding press/projection welding machine including Sortimat (ATS) feeding unit is available. Rated power at 50% duty cycle: 100kVA, max. welding power: 455kVA, open-circuit voltage: 8.88V, max. short-circuit current: 67kA, cooling water flow rate: 10l/min, electrode force min./max.: 120daN/720daN, single-stroke cylinder: 100mm, machine throat depth: 250mm, stop range: 148mm-400mm, belt diameter: 260mm. Weight: approx. 850kg, control system: MPS 200 multi R1. Including sorting and feeding unit, flow monitor, adjustment device and return stroke monitoring. Documentation available. An on-site inspection is possible. Nwsdpfx Asxr Nwajdbec

Year of construction: 1993, condition: ready for operation (used), A lattice-girder/girder welding system year 1993 is offered. Girder types: KT 8, girder height: 90mm-250mm. Upper chord: 5mm-12mm smooth/ribbed. Diagonal: 4mm-7mm smooth. Lower chord: 4mm-10mm smooth/ribbed. Maximum girder length: 14000mm, cutting grid: 100mm/200mm. Coil run-off tables: 5 units, maximum stacker stacking height: 500mm. Documentation available, inspection possible by arrangement. Nodpfsxz Ewhex Adbewc

Year of construction: 1994, condition: ready for operation (used), Offered is a lattice girder/girder production machine year approx.: 1994. Girder height: 80mm-300mm, upper chord: 5mm smooth/ribbed, diagonal: 7mm smooth, lower chord: 5mm smooth/ribbed, girder length max.: 14000mm, cutting grid: 200mm, spool payoff tables: 5 pieces. Inspection is possible by arrangement. Njdpfx Adexz Ewbebewc

Year of construction: 2013, condition: ready for operation (used), A Rehm Invertig Pro 350 AC DC and a Rehm Invertig Pro 450 DC are available, used and in good condition. 1) Invertig Pro 350 AC DC, standards: IEC 60 974-1 IEC 60 974-2, welding current range TIG: 3-350A, output voltage U₂ at maximum current: approx. 24V, open circuit voltage U₀: approx. 91V, duty cycle 100 percent for TIG at 350A, mains voltage input: three phase 400V 50Hz, protection class: IP23S, protection category: S, setting range: 3-350A for TIG in this AC DC version, duty cycle 100 percent at 40°C 350A for TIG 100 percent duty cycle, input fuse protection: 32A at 3x400V for the 350 AC DC version, length: 520mm, width: 360mm, height: 460mm, weight: 29.5kg for AC DC version. 2) Invertig Pro 450 DC, standard: IEC 60 974-1, welding current range TIG: 3-450A, output voltage U₂ at maximum current: approx. 28V, open circuit voltage U₀: approx. 91V, duty cycle 100 percent at 450A TIG, lower for electrode welding approx. 60 percent, mains input: 3x400V 50Hz, protection class: IP23S, duty cycle at 100 percent 450A TIG at 40°C, electrode welding current approx. 360A at 100 percent duty cycle for electrode in the 450 DC version, input fuse protection: 32A at 400V three phase for 450 versions, length: 520mm, width: 360mm, height: 460mm, weight: approx. 28kg. An on-site inspection is possible. Nwjdexddamspfx Adbec

Year of construction: 2018, condition: ready for operation (used), Three almost identical CNC plastic pipe butt welding machines (mirror welding machines) Hürner are available. Years of construction: 2x 2016 and 1x 2018, working range OD: 40mm-160mm, power: 2.85kW, reduction inserts: 40/50/63/75/90/110/125/140, weight: approx. 80kg. Documentation available. On-site inspection is possible. Nodpfxjviv Azs Adbjwc

Year of construction: 2007, condition: ready for operation (used), A Willems welding machine for plastics is available. Tables: 2, welding area: 500mm/400mm, pressing force: 20kN, frequency: 27.12MHz, generator output: 10kW, overhauled in 2007, documentation available. On-site inspection is possible. Nwodpfewal H Nsx Adbjc

Condition: good (used), nominal power at 50% duty cycle: 50 kVA, - Power 50 kVA - Pneumatic Nwjdpfx Adsyda Dvsbec - Throat depth 425 mm - PX 1500 Plus control - 400V

Condition: good (used), Year of construction: 1992, machine/vehicle number: 1192166605, Offer 26006 Technical Data: Nsdsyhnl Njpfx Adbjwc - Rated output at 50% duty cycle: 80 kVA - Maximum welding output: 211 kVA - Throat depth: 350 mm - Welding capacity: - Steel sheet: 8 + 8 mm - Brass sheet: 4 + 4 mm - Aluminium sheet: 4 + 4 mm - Adjustable electrode force: 120 – 720 daN - Required air pressure: 6 – 10 bar - Cooling water flow rate: 12 l/min - Control system: DALEX - Power supply: 400 V - Installation dimensions (approx.): W 950 x H 2100 x D 1500 mm - Weight (approx.): 600 kg - Including: complete electrical and pneumatic equipment - Separate recirculating cooling water unit

Condition: used, Rated power ( 50% ED ) : 50 kVA Continuous power : 35.4 kVA Maximum short circuit power : 163 kVA High welding power : 130 kVA Arm distance min. / max. : 60 / 230 mm Njdpjvuz N Refx Adbowc Electrode arm Ø : 45 mm Electrode holder Ø : 25 mm Outreach : 610 mm Machine weight: approx. 285 kg Dimensions : 1200 x 700 x 1450 mm incl. foot switch

Year of construction: 1999, condition: excellent (used), working width: 620 mm, machine/vehicle number: SE 01510 A10, HP60/40 Heating Element Welding Machine by BRANSON The machine is hydraulically driven, supported by precise positioning and control systems. It is equipped with its own vacuum pump. Usable heating element area: Width 600 mm x Depth 400 mm Maximum part dimensions: - Maximum part width: 620 mm - Maximum part depth: 420 mm - Maximum part height (top): 350 mm - Maximum part height (bottom): 350 mm (Combinations of part heights possible, depending on contour) - Maximum operating temperature for contact process: 400°C The machine's modular frame design enables straightforward conversion and modification. The side doors in the welding area can be easily opened for quick tool changes. The automatic safety lift door provides high operator safety. Temperature controllers on the control panel feature actual/setpoint displays. The control unit is a Siemens PLC (S7-300 control system). The heating elements are equipped with temperature sensors for temperature regulation and feature a safety shutdown function in case of overheating. The pin systems in the clamping plates ensure reproducible fixture positions. Advantages of heating element welding technology: - Reliable welding of workpieces with minimal or varying wall thicknesses - Low reject rate thanks to dimensionally accurate and reproducible welds - Precise time, temperature, and force control allows even sensitive components to be welded - Nearly all thermoplastics can be welded by this method - Different types of plastics can be joined (compatibility must be checked) Technical specifications: - Power supply: 3 x 400 V AC + N + PE - Power rating: 25 kVA - Rated current: 20 A Nsdpeykvdlsfx Adbjwc - Required cable cross section: 5 conductors, each 6 mm² - Required pneumatic connection: 6 bar Machine dimensions: - Machine width: approx. 1.22 m - Machine width with control panel: approx. 1.8 m - Machine depth: approx. 2.1 m - Machine depth with control panel: approx. 2.6 m - Machine height: approx. 2.4 m - Machine height with raised safety door: approx. 2.85 m (door open) Machine weight: approx. 2.2 t

Condition: excellent (used), Year of construction: 2019, We are selling a PCB spot welding system from AMADA, mounted on a workbench. The welding head is type FD 120-A/So, year of manufacture 2019. Nodpfsyhwduox Adbswc

Condition: used, Year of construction: 2007, functionality: unexamined, overall weight: 240 kg, type of cooling: water, welding power (max.): 35 kVA, Equipment: type plate available, Brand: Tecna Model: 4625|N Year of manufacture: 2007 Serial number: 01530 Capacity (kVA): 35 Voltage: 400 Frequency (Hz): 50 Dimensions LxWxH (mm): 1150 x 400 x 1650 Nwodpfswt S Adsx Adbsc Weight (kg) approx.: 240 Quantity in stock: 1 Manufactured in: Italy Max. stroke (mm): 400 Digital brand & model: Yes Comments: Optic in very well maintained condition, untested, water cooling not included

Condition: used, Spot welder, spot welding machine, spot welding machine, spot welding tongs, spot welding machine, projection welding machine, projection welding machine -Manufacturer: Aro, projection welding machine, spot welding machine, water-cooled, type N601 Nodpohx E T Uefx Adbowc -Welding power: 65 kVA -Welding control: Aro 25-002-2 -Transport dimensions: 1000/510/H1720 mm -Weight: 538 kg

Condition: used, TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine Njdpsfwg H Hjfx Adbewc -Manufacturer: Ess, TIG and hand electrode welding machine, water-cooled -Type: THYROARC 3 AC/DC direct/alternating current -incl.: ground cable, gas fitting, hose package 7500 mm long -Welding power: max. 280 A, see nameplate -Dimension: 1300/570/H900 mm -Weight: 262kg

Year of construction: 2006, condition: used, Submerged arc welding device, welding accessories, forming gas welding device, longitudinal carriage, chassis, welding carriage, longitudinal carriage, welding machine, welding carriage, inert gas welding device, longitudinal seam welding system, longitudinal seam welding machine, longitudinal seam welding device, rail runner -Submerged arc welding machine without: power source Nwedpfx Adjd Nlf Njboc -Submerged arc welding machine type: Minisaf 02 -Control box SUBARC 3 -Intermediate hose package -Equipment -Dimensions: 1200/800/H500 mm -Weight: 215 kg