Used Frame Stitching Machine for sale (69,715)

Condition: excellent (used), Year of construction: 1998, Hofmann HT 200 U frame dowel and elongated hole drilling machine with angle adjustment Special drilling machine for stair construction, window construction, and universal applications through pneumatic height adjustment. Angled dowelling and picket drilling can be easily achieved thanks to the rotating drilling unit. Motor with pole change, two speeds Motor power 1.5 / 1.8 kW, 1400 / 2800 rpm Motor start with practical handle switch Precision chuck with two inserts 16mm and M10 thread Table size approx. 1100 x 240mm Linear laser for precise positioning of the workpiece Bwodsyfta Topfx Ab Sep Drilling unit can be rotated 65 degrees to the left and right Pneumatic adjustment of the machining height, dowelling on two levels without readjustment The desired drilling heights can be set for each drilling level with a handwheel and digital counter; switching is then done pneumatically from the front Crossfeed approx. 320mm, stepless or in a 12mm grid Drilling stroke approx. 200mm 2 pneumatic workpiece clamps, can be placed at the front and rear of the table 2 swiveling workpiece supports 2 side stops, also usable as a front support Undercarriage Dust extraction connection 80mm 4 used but good drill bits 9, 12, 16, 19mm Few paint spots have been repaired, very good condition, see original photos A used swiveling elongated hole drilling machine in this condition is rarely available. CE marking Operating manual Dimensions approx. 1200 x 1200 x 1200mm (LxWxH), weight 310kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this provider".

Condition: used, Frame sanding machine LÖWER RSM 280 SX -used- Frame sanding machine sanding pad, Bwedpju R Tbhjfx Ab Sop oscillation, frame sanding device, feed belt, belt cleaning ----- Technical data ----- Sanding width: 190 mm, max. workpiece thickness: 120 mm, Speeds: 6,11,16 m/min, Motor: 5.5 kW, weight: 550 kg

Condition: used, Used machine Condition: age-appropriate for efficient dowel hole drilling of longitudinal and transverse pilaster strips for frame doors, door panels drawer parts crossbars of all kinds 3 spindle motor bung spacing 25/25 mm Bodpjw Nabxjfx Ab Sjwp stroke max 80 mm Motor 1,5 HP Support table 260 x 130 mm Height adjustment from 5-40 mm according to scale with reversible folding fence Foot valve control NRW

Condition: excellent (used), Here, we offer a TOX pressing machine, specifically the TOX-C bracket press. TOX Pressotechnik pressing machine, TOX-C bracket press. Pneumohydraulic manual workstation with process monitoring for pressing in functional elements. Technical data: Press type: EMB 030.068.Α.001 Drive: KWE3O.0O.17O.10H Pneumatic connection: G3/4'' Compressed air treatment: Filtered and dried compressed air, max. particle size 40 µm Air pressure during working process: Pmin. = 3.0 bar, Pmax. = 6.0 bar Pressing force: 170 kN Total stroke / return stroke: 170 mm / 10 mm Bwjdezd Rhkspfx Ab Ssp Control: STE 326-366-3/4"-90-230V/AC special, complete Electrical connection: 90-230V/AC Ambient temperature during operation: Tmin. = 10°C, Tmax. = 60°C TOX pressing monitoring: EPW 500FP, force/travel measurement Holding device: ZHE for TOX press Dimensions: Width 1917.5 mm, Height 2506 mm, Depth 1917.5 mm Protective grid system: Leuze B20/B21 light curtain Pressing tool: See (pictures 15 to 18) Pressing sleeve (picture 17): 24.5 ∅ mm Application area, use: Pressing Weight: 2200 kg Type: EMB 030.068.A.001 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and specifications are subject to change!) We will gladly answer any further questions you may have over the phone.

Year of construction: 1994, condition: used, Used machine Year of manufacture: 1994 Equipment and technical specifications: Working width: 300 mm Sanding belt oscillation: mechanical Roller guide: rubber-coated Sanding unit: with sanding shoe Feed speed: 2-stage Feed direction: reversible (forward/reverse) Bwsdsxq Ua Rspfx Ab Sop Motor start: star-delta Power supply: 380 V Weight: approx. 450 kg Availability: short-term Location: Baden-Württemberg

Condition: used, Year of construction: 1993, Used machine Year of manufacture: 1993 Features and technical data: 2-jaw drill chuck up to 20 mm shank diameter Pneumatic positioning adjustment on 2 levels 0-100 mm Bwsdpfx Asw I Uy Teb Sop Max. drilling depth: 150 mm Precision indexing rail 12 mm Center locking and cross adjustment 2 pneumatic safety clamping cylinders Motor 1.5 kW Speed: 2800 rpm Long hole drilling device, lowerable, with 2 program cams Machine weight approx. 310 kg Machine dimensions (W x D x H): 1100 x 1100 x 1500 mm (without stop) Availability: short-term Location: Röllbach

Condition: like new (used), Year of construction: 2025, GANNOMAT "JUNIOR 323" FRAME DOWEL AND SLOT MORTISING MACHINE Complete in standard configuration as per price list 01/22/D with: - Precision collet chuck for ER 40 collets Ø 3–26 mm, including collets Ø 10 / 13 / 16 / 20 - Motor 1.5 kW, 2800 rpm - Positioning via digital counter - Pneumatic 2-level positioning adjustment (0–100 mm) - Max. drilling depth: 150 mm - Precision indexing rail with 12 mm pitch, featuring: - Center detent and lateral adjustment 320 mm - 2 pneumatic safety clamping cylinders - Complete fence system consisting of: • 1 center stop and 1 stop for oversized frames • 1 round stop bar approx. 850 mm long (can be mirrored from left to right) • 2 flip stops - Tiltable slot mortising device with 2 program cams (400V, 3Ph, 50Hz, 1.5kW) - Extraction hood Ø 80 mm, dust-tested - Central mitre stop 45° Bodpfx Asxdttijb Sowp - Pair of auxiliary workpiece supports, pivotable (left and right) - Drill head holder - 3-spindle drilling head, 32 mm pitch (can be rotated 90°) - Chassis with 4 wheels for easy machine movement Availability: Short-term – immediately –

Condition: used, Year of construction: 2015, Offer 26163 Bjdpfjzg A Risx Ab Sewp Technical data (approximate): - Maximum workpiece diameter: 80 mm - Overhang: 70 mm - Welding torch stand adjustable in X, Y, and Z - Stand travel via handwheel: 500 mm - Stand overhang: 70 mm - Distance between centers: 600 mm - Tailstock with pneumatic pressure spindle - 3-jaw chuck: 100 mm - Hand-held remote control - Connection cable - Pneumatic connection - Table frame: W 2000 x H 850 x D 700 mm - Footprint (approximate): W 1150 x H 650 x D 500 mm - Weight (approximate): 200 kg

Condition: good (used), NAGEL Rinak stapler with base Electric stapler for block stitching and saddle stitching for brochure production Block stitching: up to 4 mm / approx. 40 sheets (80g/m² paper) Saddle stitching/brochures: up to 3 mm / approx. 30 sheets (80g/m² paper) The feed table can be easily adjusted for block or saddle stitching Stapling head stroke adjustable Benchtop machine for mounting on the table Bwsdpjzb Uuwsfx Ab Sep Staples: 26/6, 26/8S, Ri 26/6 Staple magazine capacity: 210 pieces Insertion depth: 30 mm (for block stitching) Connection: 230 V / 50 Hz Weight (net): 7.5 kg *Information according to the manufacturer and without guarantee!

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, wire stitching machine AGRAFIX BX grey model for blocks and booklets for round wire no. 21-30 or flat wire no. 0-V up to 170 stitches/min. Length of the staple's back: 14 mm Stitching thickness: 0-25 mm (up to 40 mm with open staples) Dimensions (L x W x H in cm): 65 x 70 x 160 Net weight: 240 kg Bwodpszbb N Isfx Ab Sep

Condition: reconditioned (used), machine/vehicle number: 18587 / ref.BM5136, overall weight: 300 kg, Ref. BM5136 single stitching head flat- /saddle stitching (swivelling table) thickness 1 sheet to 25 mm, clips reversed backward stab stitching up to 40 mm paper thickness staple width 14mm round wire No.30-21 + flat wire No. 0-V jib length 320 mm stitching table 610 x 200 mm space required B65 x T70 x H160cm packings dims W80 x D90 x H180cm, 240/300kg Bwjdpfx Aoqpd Rueb Sep drive 220/380 Volt, 50 cycles, 1/3 HP

Year of construction: 1994, condition: good (used), Rivo gang wheel sharpening machine Bwsdjpl D Hxjpfx Ab Sep Tyop GA 250

Condition: used, 1 used Vollmer CAGB54 U band saw sharpening machine Grinding wheel diameter: 200 mm Bwedozguvkopfx Ab Sop Complete Control system functioning Carriage has been overhauled and newly fitted with bearings, and is also suitable for CAGB50U Head and coolant pump have been newly fitted with bearings.

Condition: excellent (used), machine/vehicle number: 1395, Further MACHINERY / SPARE PARTS & MACHINE COMPONENTS of this type are available in our warehouse. ON REQUEST Bwodpjdtcchjfx Ab Sop

Condition: excellent (used), Year of construction: 2010, machine/vehicle number: 060900759, WITH TRIMMER p/n: 2654000N Format: to SRA Bodjxcaphspfx Ab Sjwp

Condition: excellent (used), machine/vehicle number: 61 988, Further MACHINERY / SPARE PARTS & MACHINE COMPONENTS of this type are available in our warehouse. ON REQUEST Bwjdpfx Absp H Tkio Ssp

Condition: good (used), Hohner Economy 25/40 Wire Stitcher Very good condition. A reliable machine with legendary durability. Technical specifications: Capacity: 206 cycles/min Sewing thickness: 25mm (punching up to 40mm without closing the staple from the bottom) Wire diameter: max. 1mm Power supply: 380V Weight: 240kg Bjdpfx Ajzhi Uwsb Sewp The machine has an adjustable table for block and booklet stitching.

Condition: good (used), functionality: fully functional, Hydraulic sharpening machine for band saws. Bsdszdkbkjpfx Ab Sswp Type Hydromat. Also ideal as a spare parts machine.

Condition: good (used), Used filing and sawing machine Hahn und Kolb / Erhardt und Spiess HK 3 SL Bwodpfx Abjzbx Sao Ssp The machine was only used very little and has been in storage for a long time. Due to lack of space, it must now be sold. Sale ex works, free loading.

Condition: good (used), Code: 0040 Brand: BREVETTI MOTTA - ITALY Bedpfx Abov Am Ibj Sewp Model: VELOX - CE Standard Pneumatic joining machine for wooden frames and Mdf , of furniture, doors, windows and various - CE Standard Technical data: Joining unit NR Workable rod dimensions: Max width mm 120 - Max height mm 70 - Min width mm 5 - Min height mm 5 Possible hourly production 150/200 finished frames Compressed air 6 bar Overall dimensions mm 500 x 680 x 1250 h Weight kg 75

Condition: excellent (used), Overview The Single Head Wire Stitching Machine is a versatile and reliable solution for wire stitching applications, suitable for both pads and brochures. Designed for consistent performance in print finishing environments, it offers the flexibility to handle standard and loop stitching with ease. Built with a robust and durable construction, this machine is well suited to long production runs while maintaining accuracy and stability. The adjustable working table allows quick changeover between saddle stitching for brochures and flat stitching for pads, making it ideal for varied workloads. An advanced wire feed system ensures smooth and precise stitching, even when working with thicker or digitally printed materials, providing consistent results across a wide range of stock types. Optional loop stitching conversion parts are available, allowing the machine to be adapted quickly to suit different production requirements. Key Features Supports both standard and loop stitching for pads and brochures Heavy-duty construction for reliable, long-term operation 25mm stitch and 40mm stab capacities Adjustable table for saddle or flat stitching configurations Maximum speed of up to 203 staples per minute Table size: 700 × 240 mm Patented wire feed and cutting system for accurate, consistent stitching Suitable for thicker and digitally printed materials Optional loop stitching conversion kit available for added flexibility Why Choose the Hohner Economy 25/40 Ideal for print shops requiring a flexible stitching solution for multiple applications Simple changeover between different stitching styles reduces downtime Capable of handling a wide range of materials, including heavier stocks Reliable and durable design suited to regular production use Cost-effective alternative to larger multi-head stitching systems Optional loop stitching capability adds value and expands service offering Specifications Manufacturer Hohner Model Hohner Economy 25/40 Condition Used Mechanic cycles per minute [staples] 203 Clinched staple 25mm Capacity Stabbed from both sides 40mm Capacity Stitching table size [mm] 700 x 240 Working height [mm] 880 Throat depth from clincher box to machine body [mm] for pad stitching 95 Throat depth from clincher box to machine body [mm] for saddle stitching 290 Maximum number of stitching heads 1 Crown width [mm] 14 Bwsdpfx Aoyyb Rdeb Sep Round wire (standard) No. 21 – 30 Flat wire 0,70 x 0,35 mm – 0,90 x 0,78 mm Electric requirement 230/400V Single or 3phase Net weight [kg] 200 Dimensions (L)900mm x (W)700mm x (H)1540mm

Condition: good (used), Introma ZD-2D Wire Stitcher Machine in very good condition, recently serviced. Technical specifications: Bwodszdavropfx Ab Sep Capacity: 180/min Maximum stitching thickness: 25mm Wire diameter: max. 1mm Power supply: 380V Weight: 230kg The machine features an adjustable table for block and booklet stitching. Front margin. Instructions included.

Condition: as good as new (ex-display), functionality: fully functional, Equipment: clamp, Fast and easy booklet and block stitching Bsdpjy Tva Tofx Ab Sowp The Rinak electric stapler is ideal for demanding applications involving smaller print runs in offices, schools, copy shops, and printing companies. Its ease of use and the ability to quickly switch between block and booklet stitching are essential features when the machine is operated by different users in a company. With the Rinak, perfect presentation materials can be quickly and economically produced, even in smaller print runs. Easy to use The table can be switched from block to booklet stitching with just one movement. The precise staple spacing – particularly important with ring staples – and the accurate positioning of the staples are guaranteed by the adjustable stop. The magazine can be easily opened to the front, allowing for quick and trouble-free reloading of staples. The machine is equipped with a safety hand guard. The height-adjustable stand is included and can be variably adjusted between 80 and 110 cm. Booklet stitching up to DIN A4 size, up to 30 sheets (equivalent to 120 pages) Block stitching up to 40 sheets Stitching is also possible with ring staples. Staple strength adjustment for thin and thick paper layers. 230 volts / operating instructions

Year of construction: 1995, condition: good (used), The bender can bend aluminum and plastic, Total length: approx. 11500 mm, depth: 1600 mm. Bjdporif U Eefx Ab Sswp

Condition: ready for operation (used), Inkjet printer for frame bending machine Length: 800mm Width: 1000mm Bwjdpjhzgtuofx Ab Sop Height: 1900mm Weight: about 100kg