Used Spot Welding Machine for sale (67,365)

Condition: good (used), Year of construction: 1985, Spot welding machine, spot welding system, spot welding gun, resistance spot welding machine, lever-action spot welding machine -Manufacturer: Tecna, Spot welding machine: Type 4161 -Rated power: 31 kVA -Operation: via foot pedal -Dimensions: 780/250/H1500 mm Ledpfx Adjk Aubxsqsri -Weight: approx. 130 kg

Condition: good (used), Year of construction: 1976, Spot welding machine, spot welding system, spot welding gun, resistance spot welding machine, lever-action spot welding machine -Stationary -Operation via hand switch -Arm length of welding machine: 350 mm -Welding pliers type: -Steering -Machine dimensions: 1500/1000/H1670 mm -Machine weight: 774 kg Ledoc N Uabspfx Adqsri -Dimensions of control cabinet: 1550/420/H1960 mm -Weight of control cabinet: 330 kg

Condition: good (used), Year of construction: 2016, Spot welding machine, spot welding system, spot welding gun, resistance spot welding machine, lever-action spot welding machine -Manufacturer: CEA, rocker arm spot welding machine type ZP 28 -Rated power: 25 kVA -Arm length: 550 mm, adjustable length -Operation: via foot pedal Lsdpfx Adjyvz Injqori -Dimensions: 1050/330/H1270 mm -Weight: 152 kg

Year of construction: 1990, condition: used, machine/vehicle number: 9072492, nominal capacity: 100 kVA throat: 500 mm spark plug air gap: 330 - 500 mm electrical connection: 400 V kW space needed: 700 x 1420 x 2000 mm weight: 750 kg Lrjdpfx Aez H Dyedqei

Condition: used, machine/vehicle number: 4229, nominal capacity: 12,5 kVA throat: 350 - 500 mm spark plug air gap: 120 mm welding capacity steel: 8 mm Lrsdpfx Ajbh Nxrsdqei electrical connection: 380 V kW space needed: 400 x 1000 x 1150 mm weight: ca. 190 kg

Condition: used, Year of construction: 1975, machine/vehicle number: 12138/4, nominal capacity: 20 kVA throat: 250 - 600 mm spark plug air gap: 270 mm welding capacity steel: ca. 2,5 + 2,5, max. 3,5 - 1,5 mm electrical connection: 380 V kW space needed: 470 x 1170 x 1300 mm Lrjdpfx Adsb Nvimoqji weight: 210 kg

Condition: used, Year of construction: 2012, manufacture NIMAK electric cabinet Rexroth - Bosch Group dimension div. verfügbar In our opinion, the machine is in good used condition Condition and can be viewed by appointment. Welding tons Technical features: - including control unit Lredpoxrg Ebsfx Adqji There are around 150 different welding tons available. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Condition: good (used), Year of construction: 1995, Rated power: 63 kVA Thrust: 520 mm Electrode arm distance: 200 mm Welding capacity for steel: approx. 7 + 7 mm Lsdpfxswurw Rs Adqjri Welding capacity for non-ferrous metals: approx. 2 + 2 mm Electrical connection: 380 V kW

Condition: not inspected (used), Year of construction: 1991, functionality: unexamined, machine/vehicle number: 14098/91, short-circuit current: 1,200 A, overall weight: 3,000 kg, total width: 2,400 mm, total height: 2,700 mm, total length: 2,500 mm, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates the buyer to collect the machine within the period from 08.04.26 to 16.04.26! MACHINE DETAILS Electrical data Electrode force: 26,550 N Operating voltage: 380 V Connected load: 474 kVA Rated power: 3 x 50 kVA Rated current: 228 A Secondary voltage: 3.5 - 6.3 V Secondary rated current: 17,400 A Short-circuit current: 1,200 A Secondary short-circuit current: 92,000 A Mains frequency: 50 Hz Dimensions & weight Dimensions (L x W x H): 2,500 x 2,400 x 2,700 mm Weight: 3,000 kg Lsdeyk Up Tjpfx Adqjri External reference: 15

Condition: good (used), nominal power at 50% duty cycle: 10 kVA, – Capacity 10 kVA – Pneumatic – Adjustable power Lrjdpfjyvpkdox Adqji – Adjustable pressure – Tool – Documentation – 400V

Condition: used, Spot welding machine, projection welding machine DALEX type PL 63 Lrjdsycv Saopfx Adqji Serial No. N-0051390 Year of manufacture 2018 Output at 50% duty cycle: 63 kVA Output at 100% duty cycle: 44.5 kVA Maximum welding power: 182 kVA Rated welding current: 8.77 kA Throat depth: 250 - 550 mm Maximum arm spacing: 150 to (310 mm) Upper electrode arm diameter: 50 mm Lower electrode arm diameter: 60 mm Electrode holder diameter: 25 mm Electrode stroke max.: 65 mm Electrode force: 100 - 600 daN Operating air pressure: 1 to 6 bar Power supply: 400 Volt, 50 Hz Rated current: 158 A Connected load: 137 kVA - Thyristor power stage - Welding control HARMS+WENDE - HWH MPS 10β - 5-stage control, single spot, series spot, 8 programs - Electrode force infinitely adjustable via air pressure - Parallel electrode guidance - Single-stroke welding cylinder - Water-cooled via external water cooling system (recirculating water cooler not included) - Electric foot switch - Control cabinet with controller fixed to machine - Operating manual Required space (L x W x H): 1150 x 700 x 1600 mm Weight: 335 kg As-new condition

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Rated power at 50% duty cycle: 20 kVA Lrsdpfxeyv Aqwe Adqji Max. welding power: 40 kVA Throat depth adjustable from 280 to 550 mm Electrode stroke: 15 to 85 mm Welding capacity for steel sheet approx. 4 + 4 mm Electrode force adjustable up to 240 daN Cooling water flow: 3 l/min Weight approx. 122 kg Welding controller T 90 Mark II Operating instructions and manual included Work stroke triggered via pneumatic foot pedal

Condition: like new (used), Year of construction: 2021, – Year of manufacture 2021 (the machine has never been used) – Capacity 20 kVA – Pneumatic Lrjdpfx Aoytr N Nodqsi – Control TE101 – Cooling – Documentation – 400V

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, type of input current: three-phase, throat depth: 430 mm, nominal power at 50% duty cycle: 88 kVA, type of cooling: water, overall weight: 279 kg, Electrode holder, electrode arms, transformer and water-cooled electrodes Welding controller with graphic display Medium-frequency technology / inverter Lsdpfx Aeyvx Hzodqjri Welding controller PY800 Electrode stroke 60 mm Water requirement 9 L/min

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 920601, throat depth: 300 mm, overall weight: 500 kg, total width: 800 mm, total height: 1,500 mm, total length: 1,200 mm, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates the buyer to collect the item either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Reach: approx. 300 mm MACHINE DETAILS Operating voltage: 380 V Frequency: 50 Hz Rated primary voltage: 380 V Open-circuit voltage: 2.3 to 4.1 V Operating current: 2.6 kA Connected load: 43 kVA Lodpsynkmcefx Adqjri Dimensions & Weight Dimensions (L x W x H): 1,200 x 800 x 1,500 mm Weight: 500 kg External reference: Lot 30 / Training workshop

Condition: used, Spot and projection welding machine NIMAK type BMP 20/150 Spot welding machine, projection welding machine Mach. No. 81692 year of manufacture approx. 1980 Power at 50% duty cycle 150 kVA Clamping plate below 200 x 160 mm Clamping plate above 200 x 160 mm Power setting continuously variable Max. projection 150 mm Electrode force 200 - 2000 kp continuously variable Operating air pressure max. 6 bar Connection power 600 kVA Lsdpfxev Dxm So Adqjri Mains connection 380 volts, 50 Hz - Welding control DTW 4Z 2P - Single spots and series spots - Parallel electrode guidance - Water-cooled without cooling unit - Electric 2-hand control panel with emergency stop - Control cabinet with control permanently attached to the machine Space requirement L x W x H 1000 x 800 x 1800 mm Weight 900 kg good condition

Condition: used, Spot projection welding machine NIMAK type PMP 5 / 35 Spot welding machine, projection welding machine Make No. 88100 Year of construction approx. 1988 power at 50% ED 35 kVA throat 250 - 450 mm working stroke 40 mm electrode force 100 - 460 kp infinitely variable Electrode force at 6 bar 460 daN Operating air pressure 2 to 6 bar Electrode arm Ø 60 mm Electrode holder Ø 30 mm Insert electrodes cone MK 2 Ø 17.78 mm Arm distance 200 / 400 mm Adjustability of electrode holder 200 mm Connected load 83 KVA Mains connection 380 Volt, 50 Hz - 4-time control - stepless power adjustment - single points and series points - bouncing electrode guide - water cooled (without cooling unit) - electrical foot switch Lredpfshubgzox Adqsi space requirement L x W x H 1200 x 650 x 1500 mm weight 300 kg good condition

Condition: used, AC Spot Welding Machine, Projection Welding Machine ARO Type MA 350 DC AC Resistance Welding Machine Mach. No. MA35031332 / 9731122B110 Year of Manufacture 1997 Power at 50% duty cycle: 30 kVA Power at 100% duty cycle: 21 kVA Maximum welding power: 156 kVA Thrust 550 mm Electrode arm diameter: 60 mm Electrode holder diameter: 25 mm Cylinder stroke max. 80 mm Electrode force max. 730 daN (at 6 bar), continuously adjustable Operating air pressure 0.5 to 6 bar Mains connection 400 volts, 50 Hz Connected load 75 kVA / 63 amps / Cable cross-section 3x 16 mm² Maximum possible sheet pairing: 5 mm + 5 mm - ARO Micro welding control system 2X16 III Version 6Z2P Type 1B (6 times - 2 programs) - Continuous welding current adjustment via thyristor module - Parallel electrode guide - Double-stroke welding cylinder (pre-stroke / welding stroke) - Single-stroke and continuous spot welding modes - Electrode force continuously adjustable via air pressure - Water-cooled by external water cooling (water cooling unit not included) - Electric foot switch - Control cabinet with control system permanently mounted on the machine - PC interface RS 485 Lsdpfxehpf Iyj Adqori - Spot weld counter - Operating instructions for control system, spot welder, and electrical diagram included Space requirement: W x H x D 520 x 1550 x 1150 mm Weight: 290 kg Very good condition

Condition: used, Cooling unit Water recooling unit DALEX type DRF 2 Machine no. No. 38913719 Year of construction 1989 Volume flow 0.35 m3/h Cooling capacity 1950 Watt Operating pressure 2 to 3 bar Refrigerant R 134a Unit was converted from R12 to R134a Operating overpressure 18 bar Pipe connection thread 3/4" Ljdpeg D H Rusfx Adqjri Tank volume 600 x 400 x 350 mm = approx. 80 liters Mains connection 380 Volt, 50 Hz Space requirement L x W x H 900 x 800 x 1020 mm Weight 100 kg Good condition

Condition: used, MF welding machine with water-cooled spotter Medium frequency spotter Manufacturer: TECNA (Italy) Type 3670 E CF00 Serial no.: Year of construction 2014 Rated welding power 25 kVA Max. welding power 160 kVA Power supply 400 Volt, 50 Hz Lsdpfxog U A Uzj Adqjri - Welding controller TE750 or TE760 - Spotter for single-sided spot welds - Ideal for bodywork repair with excellent weld quality - Water-cooled type 2BHPLN - Mobile transport trolley Weight approx. 155 kg Very good condition - as new

Condition: used, Capacitor discharge welding machine MEGATRONIC type CD-1200 / QB 2 / 6P Capacitor discharge welding with high currents and minimum welding times. Spot projection welding machine The CD (Capacitator-Discharge) welding technology works on the principle of transformed capacitor discharge. Year of manufacture 1993 Very high welding power with relatively small power supply. - very short welding times, welding process with current rise and high welding current in milliseconds - no distortion or annealing - no significant heating of the edge areas, ideal for heat sensitive components - welding of steels with high carbon content - welding of surface coated workpieces rated power 12288 Ws Uc 3200 Volt Capacity 2400 µF Open circuit voltage 10 volts Electrode force 200-2000 daN infinitely variable Lrodpfeguvtdsx Adqji Operating air pressure 6 bar Mains fuse min. 35 Amp. Operating current 32 Amp. Mains connection 400 Volt, 50 Hz - Programmable control megapuls CD-12000 - pralleler electrode guide - Electrical 2-hand control panel adjacent - Switch cabinet with control fixed to the machine weight 3000 kg good condition

Condition: used, Capacitor discharge welding machine MEGATRONIC type CD-1200 / QB 2 / 6P Capacitor discharge welding with high currents and minimum welding times. Lrjdpfx Adeguvtasqsi Spot projection welding machine The CD (Capacitator-Discharge) welding technology works on the principle of transformed capacitor discharge. Masch. No. 352 / 92 Year of construction 1993 Very high welding power with relatively small power supply. - very short welding times, welding process with current rise and high welding current in milliseconds - no distortion or annealing - no significant heating of the edge areas, ideal for heat sensitive components - welding of steels with high carbon content - welding of surface coated workpieces rated power 12288 Ws Uc 3200 Volt Capacity 2400 µF Open circuit voltage 10 volts Electrode force 200-2000 daN infinitely variable Operating air pressure 6 bar Mains fuse min. 35 Amp. Operating current 32 Amp. Mains connection 400 Volt, 50 Hz - Programmable control megapuls CD-12000 - pralleler electrode guide - Electrical 2-hand control panel adjacent - Switch cabinet with control fixed to the machine weight 3000 kg good condition

Condition: used, Spot welding machine DALEX type SL 16 EA Machine No. 68611900-5 Year of manufacture: 1986 Rated power at 50% duty cycle: 16 kVA Maximum welding power: 50 kVA Throat depth: max. 500 mm Electrode force: max. 17 - 278 daN Electrode arm diameter: Ø 45 mm Electrode holder diameter: Ø 25 mm Arm spacing: 140 mm / 280 mm Power switch: 8 stages Control: 4 times with single and series spots Operating pressure: 1-6 bar Lrsdjwwaz Nspfx Adqsi Open circuit voltage: 1.8 to 3.6 volts Connected load: 37 kVA Electrical connection: 400 Volt, 50 Hz - Welding cycle initiated via electric foot switch - Welding time infinitely adjustable - Water-cooled Space required (L x W x H): 1100 x 600 x 1200 mm Weight: 200 kg Good condition

Condition: used, throat depth: 420 mm, nominal power at 50% duty cycle: 60 kVA, input voltage: 400 V, type of cooling: water, nominal power (apparent): 14 kVA, Spot welding machine type 8003 TECNA – for welding nuts and sheet metal – completely overhauled and inspected Rated voltage: 400V Rated power: 60kVA at 50% duty cycle Short-circuit current: 22kA Welding current: 17.6kA Lsdpfxsh N Sd Uj Adqori Fuse protection: 125A Throat depth: 420mm Electrode force: 470daN Cylinder with pre-stroke Total stroke: 80mm Double stroke: 60mm Electrode taper MK2 – new electrode holder New 2-stage foot switch according to UVV All pneumatic and water hoses renewed Weight approx. 330kg - TE 180 with digital display of welding current, current rise, etc. - Main switch at control cabinet - Original documentation / operating manual available - Machine inspection with confirmation 02/2026 Demonstration and inspection by appointment, Commissioning and training at customer’s site available for an additional charge The unit is located in Dresden, near A17 A suitable cooling unit is always in stock – available at an additional cost ;-)

Condition: used, Welding transformer, high-current transformer, transformer for spot welding machines, projection welding machines, seam welding machines ELREX type 3x ET70.0.G Serial no. Year of manufacture approx. 1990 Comprising three water-cooled transformers with water-cooled rectifier block Technical data: Total rating at 50% duty cycle: 210 kVA (total output from 3 transformers) Secondary voltage: 7 – 10.5 volts (adjustable in 4 steps via terminal connectors on the transformer) Secondary current at 50% duty cycle: 20.1 kA (total from 3 transformers) Primary connection: 380 volts, 50 Hz (three-phase) Details per each transformer: Rating at 50% duty cycle: 70 kVA (per transformer) Secondary voltage: 7 – 10.5 volts (adjustable in 4 steps via terminal connectors on the transformer) Secondary current at 50% duty cycle: 6.7 kA (per transformer) Primary connection: 380 volts, 50 Hz (two-phase) Cooling water requirement per transformer: 4 liters/min. Insulation class: F - Water-cooled transformer - Water-cooled rectifier block mounted on secondary side - DC power output via contact surfaces 50x50mm with M20x1.5mm threaded holes - Temperature sensor on each rectifier element and on each transformer winding - Connection cable: 7-core, cross section 50 mm², length approx. 6 m Lsdpfodzp Txjx Adqeri Overall dimensions (WxHxD): 700 x 710 x 440 mm Total weight: 480 kg Good condition