Used Extruder for sale (405)

Year of construction: 2013, operating hours: 7,700 h, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 12090, This is a recycling extruder with side feeding for materials (flakes, pellets, etc.). The system is supplied with a control cabinet and a double vacuum system. The pelletizing system is missing at the end of the screw – it is not included in the scope of supply. The cylinder ends at the flange. The extruder is supplied without a screw. The frequency inverter for the main motor was replaced with a new unit 3 years ago. Installed power approx.: 474 kW Cooling water requirement approx.: 190 l/min Fresh water consumption approx.: 110 l/h Feeding system: • Diameter of the feeding screw: 200 mm • Drive for the feeding screw: 45 kW, frequency-controlled • Hopper capacity net 7 m³/250 ft³, • Gear motor 3 × 3 kW • 2 sight glasses in the hopper • 2 level indicators Extruder: • Diameter of the extruder screw: 145 mm • L/D ratio: 24 • Heating power: 50 kW • Extruder drive unit 280 kW Vacuum 1: • Screw length: 16 L/D • Heating power: 40 kW • Vacuum pump power: 11 kW • Vacuum capacity: 225 m³/h • Vacuum pressure: 33 mbar Gusdpfx Ajznz Ezscmji Vacuum 2: • Screw length: 16 L/D • Heating power: 40 kW • Vacuum pump power: 7.5 kW • Vacuum capacity: 190 m³/h • Vacuum pressure: 33 mbar Cylinder: • Cylinder: Bimetal extruder cylinder, • Reinforcement layer 1.8–2.0 mm thick, • Hardness 63–65 HRC Installation conditions: • Voltage: 3 × 400 Volts • Permissible fluctuation max.: +5 % – 5 % • Frequency: 50 Hz Permissible fluctuation max.: +4 % – 4 % • Protective measure: Multiple grounding • Ambient temperature: min. 15 °C, max. 35 °C • Humidity max.: 90 % • Altitude of the installation site: 0 – 1000 m The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center is being closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe. The details for optimal transport need to be clarified. The machine price is without packaging.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1990, machine/vehicle number: E2018, total length: 7,000 mm, total width: 3,500 mm, total height: 6,000 mm, Very well-maintained machine in good working condition. Gedpfjzgc Ihsx Acmsui Capacity up to 100 kg/h. Screw diameter 60 mm. Head diameter 160 mm. New, additional set of screws and cylinder included.

Year of construction: 2020, condition: good (used), functionality: fully functional, For sale: Farmet FE1000 Clever Max industrial feed / soybean / grain extruder. Manufacturer: Farmet Model: FE1000 Clever Max Year: 2020 Main motor: 110 kW Throughput: approx. 900–2,100 kg/h depending on material and process setup Condition: used, fully functional Location: Slovakia, EU The extruder was used for approx. 2 years. Additional accessories were never used according to seller information. Included: Farmet FE1000 extruder Guodpoxfcwmjfx Acmsi Clever Max control system PLC control with HMI touchscreen Frequency converter for the main drive Stainless steel steam conditioner Cutting head Electrical control cabinet Accessories as shown in the photos Suitable for: soybean extrusion full-fat soybean processing cereal and grain extrusion oilseed meal / press cake processing compound feed production pet food and fish feed applications, depending on recipe and final line configuration The Clever Max control system allows better adjustment of extrusion parameters through PLC/HMI control and frequency regulation of the main drive. This is a strong industrial extruder suitable for medium-capacity feed and oilseed processing plants. Sold as shown in the photos. Inspection possible. Loading possible. Worldwide shipping on request. Price: FCA Slovakia, plus VAT. Zu verkaufen: Farmet FE1000 Clever Max Industrie-Extruder für Futtermittel, Soja, Getreide und Ölsaaten. Hersteller: Farmet Modell: FE1000 Clever Max Baujahr: 2020 Hauptmotor: 110 kW Leistung: ca. 900–2.100 kg/h, abhängig von Material und Prozess Zustand: gebraucht, voll funktionsfähig Standort: Slowakei, EU Der Extruder war ca. 2 Jahre in Betrieb. Weiteres Zubehör wurde laut Verkäuferangabe nicht benutzt. Ausstattung: Farmet FE1000 Extruder Clever Max Steuerung PLC-Steuerung mit HMI Touchscreen Frequenzumrichter für den Hauptantrieb Edelstahl-Dampfkonditionierer Schneidkopf Schaltschrank Zubehör wie auf den Fotos Geeignet für Sojaextrusion, Vollfettsoja, Getreide, Ölsaaten, Presskuchen, Mischfutter sowie Pet-Food- und Fischfutter-Anwendungen je nach Rezeptur und Linienkonfiguration. Besichtigung möglich. Verladung möglich. Versand auf Anfrage. Preis: FCA Slowakei, zzgl. MwSt.

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2012, machine/vehicle number: Matricola: 40EV.147, The EBC40 HT/42D 600rpm extruder was manufactured by Comac (year of manufacture 2012). Gsdpfxj Afnqcj Acmoui The motor is an AC motor with a power of 60kW. The extruder is equipped with an Omron-made PLC. The cabinet is fitted with an air conditioner. A degassing system with a 2.2kW liquid ring vacuum pump is included; the extracted gases are allowed to settle in a dedicated container for easy cleaning. The extruder is equipped with a twin-screw extrusion head, including a pressure and temperature transducer (newly supplied). Below are the specifications of the proposed model: Screw diameter: 42 Screw speed: 600rpm Motor power: 60kW L/D ratio: 42 Effective penetration ratio: 1.5

Condition: good (used), Brand: Cincinnati Milacron Austria GmbH Type of machine: Vacuum tank Model: V-225/1/6 Machine number: 2026708.50 Year of manufacture: 1999 Pipe outside diameter max.: 2 x 32 Ø Cooling length: 6 mm Spray pump: 5 kW Dimensions (LxWxH): 6600 x 1100 x 1750 mm Weight: 1,200 kg Brand: Cincinnati Milacron Austria GmbH Type of machine: RAE 32/2 E Machine number: 2026708.70 Year of manufacture: 1999 Pipe outside diameter max.: 32 Ø Dimensions (LxWxH): 1450 x 1150 x 2500 mm Weight: 900 kg Brand: Cincinnati Milacron Austria GmbH Type of machine: RSE 32/2 NG Machine number: 2026708.80 Year of manufacture: 1999 Pipe outside diameter max.: 32 Ø Gusdpfx Acj Ahy Tpomsi Dimensions (LxWxH): 2350 x 1100 x 2000 mm Weight: 900 kg Brand: SICA S.p.A Type: A 10 63 Serial No.: 9912801 Year of manufacture: 1999 Voltage: 380 V Power: 4 kW Pipe Ø max.: 63 mm Dimensions (LxWxH): 5500 x 950 x 2000 mm Weight: 1600 kg

Condition: refurbished (used), Year of construction: 2000, sorema previere plastic wash line forsale with 160 mm extruder and numereous silos and atramu agglomerator Gjds Akdzzjpfx Acmeui

Condition: good (used), Year of construction: 1998, operating hours: 89,340 h, functionality: fully functional, screw diameter: 90 mm, overall weight: 16,000 kg, clamping force: 650 kN, total width: 2,750 mm, total length: 5,600 mm, total height: 3,200 mm, Manufacturer: Sterling Model: 15 LBS Guedpfx Acozfxwismsi Year of manufacture: 1998 Operating hours: 89,340 h Closing force: 650 kN Screw diameter: 90 mm BM Sterling APV, year of manufacture 1998 Complete control system replacement in 2008 with MACO-sys 6000, carried out by Davies-Standard LTD PRICE REDUCTION OF 30%!!! Net price: from 45,000 EUR to 31,500 EUR!!!

Condition: good (used), Year of construction: 2008, This extruder line from Kuhne is in machine storage at Plastima Used Machinery. The machine is from 2008 and in excellent condition. Brand: Kuhne GmbH Model: K 60E - 33D Screw type: single screw Year of construction: 2008 Screw diameter Ø: 600 mm L/D ratio: 33 Cylinder height: 425 mm Gedpez Egy Njfx Acmsui Cone height: 325 mm Total height: 750 mm

Year of construction: 2017, condition: good (used), Used Xtrutech extruder XTS 24 available. The extruder is fully operational and was used in powder coating applications, supplied with many spare parts. We can offer the extruder with Brabender dosing and a cooling belt. Gedpfx Acsvcynusmjui

Condition: like new (used), Year of construction: 2020, functionality: fully functional, type of input current: three-phase, Zhejiang Baina 150 20D 1000Kg/h extruder The extruder is almost new and is available immediately with a few operating hours. Manufacturer: Zhejiang Baina Type: E150-01-00 Year of manufacture: 2020 External dimensions (L × W × H): 4200 × 1600 × 1500 mm Side rollers; the driving force is provided by the screw, with active dosing Coordinated operation of the feed roller gear drive and the screw drive, with automatic lubrication system Screw material: 38GrMoAcA Screw hardness: HRC 65–68 Steel bushing hardness: HRC 65–70 Nitriding depth: 0.4–0.7 mm Screw design: Design with suction groove for vacuum suction Pressure control, pressure protection value adjustable between 0–35 MPa; with temperature sensor. Screw diameter: 150 mm Screw speed: 1–50 rpm Maximum output: Approx. 1000 kg/h Number of heating stages / output: 7 × 6 kW Cooling stage: 1 stage (side rollers) Vacuum pump output: 2.2 kW Temperature control Automatic heating and cooling control with electromagnetic valve Circulation pump: Weile Cooling water pressure: 0.15–2 kg/cm² Temperature control accuracy: ±1 °C Screw and gear connection: Involute gear connection Motor and reducer drive: Belt drive Hardened gear type: ZLYJ420-28-I (involute gear reducer) Motor power: 160 kW Total installed power: 204 kW Speed ​​control: Frequency converter control Gedpey Ez Erjfx Acmjui

Condition: as good as new (ex-display), 7250 Lleal Reception Trough,Double Sigma Kneader MIxer,1500L Industrial Screw Discharge Buffer Tank, 2022, Used machine Manufacturer: Lleal, S.A. Equipment: Reception Trough Model / Capacity: I500 L Year of manufacture: 2022 Serial / Item number: 18725/2 / 5904 Electrical connection: 400 V, 3 Phase + N + PE, 50 Hz, 59 A Total power: 30.25 kW Condition: Used, like-new industrial condition Technical and operating parameters: Operating principle: Buffer and reception trough with bottom discharge extruder screw (without mixing blades) Guodpfx Acez Tdd Aomei Discharge screw drive: approx. 30 kW Safety standards: CE marked, 2006/42/CE Machinery Directive Design, Operation: High-capacity 1500-liter industrial reception and buffer trough manufactured by Lleal. Designed without agitators or mixing blades, its primary function is to store high-viscosity or paste-like materials and transfer them continuously and smoothly using the integrated 30 kW bottom discharge screw to downstream packaging or processing equipment. Suitable Application Areas: Receiving and buffering pastes, doughs, or viscous masses discharged from kneaders/mixers. Intermediate storage and controlled feeding in chemical, pharmaceutical, and food process lines. Dosing and conveying heavy, non-flowing materials. 7251 - Lleal AME-1250-SF Industrial Extruder Kneader Mixer, 2022 Lleal AME-1250-SF Industrial Extruder Kneader Mixer, 2022 Manufacturer: Lleal, S.A. Model: AME-1250-SF Year of manufacture: 2022 Serial / Item number: 18725/1 / 5104 Electrical connection: 400 V, 3 Phase + N + PE, 50 Hz, 173 A Total power: 90.25 kW Design: ATEX / Ex Explosion-proof execution (Group II) Condition: new, like-new industrial condition Overall dimensions (A x B x C): 4143 x 2635 x 1950 mm Mixing tank volume: Useful volume: 750 liters Total volume: 1400 liters Technical and operating parameters: Mixing blade drive: 2 pcs mixing motors, total 60 kW Extruder screw drive: 30 kW Operating principle: Heavy-duty Sigma/Z-blade kneader-mixer with integrated bottom discharge extruder screw Safety standards: CE marked (0163), 2006/42/CE Machinery Directive, and 2014/34/UE ATEX Directive Design, Operation: Top-tier high-capacity industrial Lleal AME-1250-SF extruder kneader mixer. In the 1400-liter total capacity bowl, powerful twin mixing blades driven by 60 kW total power homogenize highly viscous, dense materials. Following the process, the 30 kW bottom discharge extruder screw efficiently empties and shapes the product without air entrapment. Suitable Application Areas: Large-scale chemical and pharmaceutical processing of dense pastes, adhesives, and sealants. Heavy-duty plastics, rubber, silicone, and resin compounding and homogenization. Industrial food and cosmetics processing of heavy doughs, creams, and viscous masses

Condition: good (used), Ballfood Extru25 screw extruder Guodpfx Acez E S Dtsmoi Screw extruder designed for high capacity dough production, variable speed, with ball rolling machine, 1Ph

Condition: used, functionality: fully functional, Year of construction: 1994, weight 2,2 t extruder diameter x mm x Guodpfx Aox U A Iaocmsi +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: good (used), functionality: fully functional, Year of construction: 2016, machine/vehicle number: 1930036, operating hours: 6,900 h, This is a used twin-screw extruder for processing moist materials. (A complete overhaul is included in the price and will be carried out by Brabender/now Anton Paar.) The machine was used to produce textured soy protein in a purely vegan facility. The textured soy protein is moist, and it was used to produce vegan products such as "cutlets," "fish," "nuggets," "bacon," etc. Gjdezhnluopfx Acmsui

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2003, machine/vehicle number: P02/194, Equipment: CE marking, The machine was completely refurbished between 2020 and 2021, including overhauling the spindle, electrical panel, installing a second filter, touchscreen, PLC, temperature control (solid-state relay), internet access, repainting, etc. The machine is currently in production. Gedpfez I Tghox Acmeui

Year of construction: 2006, condition: used, functionality: fully functional, Complete Extrusion Line for Plastic Pipes Luigi Bandera / Graewe / Supertech Year of manufacture: 2006 For sale: Complete extrusion line for the production of plastic pipes. Installed in a mobile container setup = 3 x 40-foot sea container. (Walking Pipe system). Ideal for mobile production or limited space. Specifications: Extruder: Luigi Bandera S.p.A. Year of manufacture: 2006 Serial number: 251371 / 251372 Downstream processing / cooling line: Supertech Industrie – Walking Pipe system Saw / cut-off unit: Graewe GmbH Type: RA 250/4 Year of manufacture: 1999 Control system: Krauss Maffei Installation: fully integrated in container (plug & play concept) Description: This robust extrusion line is suitable for the production of plastic pipes (PE/PP/PVC depending on configuration). The line consists of a powerful Bandera extruder, followed by a complete calibration, cooling and transport section (Walking Pipe), and a Graewe cut-off saw. Gusdpjzbkkhjfx Acmoi Applications: Drainage pipes Cable protection pipes Industrial pipelines Irrigation systems 💬 Price on request 📍 Viewing possible by appointment; address = 7822 Ath, Belgium Keywords: Technical / industrial Extrusion machine Extrusion system Extrusion line Screw extruder Melt processing machine Plastic processing machine Pipe production machine Profile extrusion machine Continuous forming machine Melt and forming system

Condition: used, Year of construction: 2021, functionality: fully functional, Components/parts of a wastewater treatment plant are for sale due to the closure of the site in 63683 Ortenberg. The following plant components are available for sale: 2 x Bühne3 filter tanks, D-750, manufactured in 2022 1 x FF Bio Container, 5 cbm, with float from Kühn Wastewater Technology (biological degradation of sugar in wastewater) 1 x FF Bio Container, 10 cbm, with float from Kühn Wastewater Technology (biological degradation of sugar in wastewater) 1 x Lamella scraper from Kühn Wastewater Technology for approx. 2000 liters of wastewater/hour, with filter bag frame 1 x Stainless steel tank, 19 cbm 1 x Sedimentation tank from Firma Klees (mixing tank for polymer and iron(III), volume 4.6 cbm), manufactured in 2016 You can purchase individual plant components. Please feel free to submit an offer! Self-collection in 63683 Ortenberg. Gujdpfxo Ai D Ayo Acmsi

Year of construction: 2015, operating hours: 36,000 h, condition: good (used), functionality: fully functional, machine/vehicle number: 04638, Leistritz ZSE40HP-36D Year of manufacture: 2015 Power: 55 kW Speed: 600 rpm Includes die head with 6 holes Includes volumetric dosing unit from Brabender Previous application: MB ABS, PP & PE, up to 120 kg/h Operating hours: approx. 36,000 h For the condition and contents of the offer, please refer to the pictures and video. The system is currently located in England. Gsdpex Sq I Njfx Acmjui The system is currently disassembled. The device/system offered here has been tested and is fully functional and ready for operation. The purchase price includes VAT. You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT ID number is required. Subject to prior sale. Please visit our website and check out our other offers as well. Stated company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Deviations from technical data as well as errors in the description of the item may occur and are subject to change.

Condition: like new (used), functionality: fully functional, Year of construction: 2015, operating hours: 1,870 h, screw conveyor diameter: 63 mm, Krauss Maffei KMD-63K extruder in very good condition for sale. The machine comes from a technical center and has only 1,870 original operating hours! All functions are in working order. An inspection with a test run without material is possible at any time. Gjdpfez Ag Tgsx Acmeui Technical data: - Year of manufacture: 2015 - Operating hours: 1,870 - C5 control system - Twin-screw, single-conical design - Closed screw cooling system - Standard profile screw - Motor power: 38.3 kW - Weight: 2,700 kg Delivery includes all documents, hoppers, and adapters. Loading with a forklift. Delivery is possible by arrangement. Export documents and sea packaging are also available. Please do not hesitate to contact us with any questions.

Condition: good (used), Year of construction: 2002, operating hours: 1,378 h, Brand: Berstorff Type: ZE 25 compounding line Serial no.: 90200771-0010/2002 Year of manufacturing: 2002 Operating hours: 1,378 Screw diameter: 25 mm Screw L/D: 44 Dimensions (LxWxH): 4,500 x 1,200 x 2,200 mm Gujdpfx Acoz Eg Awsmoi Weight: 1,350 kg Line configuration: – 1x gravimetric powder feeding system from Brabender – 1x vent port for degassing, including vacuum pump – Filament die with 6 cavities – Cooling roll with tempering unit – Pelletizer with adjustable speed – Central control cabinet Other: All documentation available in German The machine was originally used for biomaterials

Condition: ready for operation (used), Ring heating bands in various sizes Gsdpfjwh Sxzex Acmsui Total price: EUR 750.00

Year of construction: 2006, operating hours: 15,000 h, condition: good (used), For sale is an Erema 1007T. Year of manufacture: 2006 Operating hours: 15,420 Gjdpeumubysfx Acmjui Throughput: 250-350 kg/h Currently, the system is used to process HDPE, but it is also suitable for other plastics such as LDPE. The system can be viewed during operation. A new extruder screw was installed in February.

Condition: like new (used), functionality: fully functional, Year of construction: 2023, Our compact extruder model EX20-25d Manufacturer: PMH GmbH Screw diameter [mm] 20 Screw length [L/D] 25 Screw speed [min-1] 10-192 Screw nitrided Torque 55Nm Drive Three-phase drive with frequency converter Gjdpfsq R Tkwox Acmjui Drive power [kW] 1.1kW Barrel material: nitrided Electrical connection values 3 / N / PE Supply voltage [V] 400V at 50 Hz Control voltage [V] 24V Ceramic heating tapes [W] 1200W Number of heating tapes 3 Max. Output approx. 5kg/h Max. Processing temperature [°C] 300

Condition: used, The Braibanti/Pavan extruder is designed for the continuous production of short-cut pasta, breakfast cereals, and pet food. The prepared dough is conveyed through a temperature- and moisture-controlled screw extruder toward the die, which ultimately defines the shape of the product. Extrusion takes place under controlled pressure and temperature to ensure consistency and structural integrity. At the end of the extruder, a motorized, speed-controlled rotating knife cuts the extruded product to the desired length. Prior to extrusion, the dough undergoes a structured preparation process. It begins with a two-step mixing system that combines dry and wet ingredients into a homogeneous mass. This system uses a single mixing arm with directionally adjustable paddles to ensure proper pre-conditioning and hydration. The final stage of preparation takes place in a high-performance mixer/kneader unit, which further develops the dough structure to achieve optimal plasticity, consistency, and elasticity-critical parameters for stable and high-quality extrusion performance. Continuous mixer - preconditioner PR220 (2-line version) ± 100 L / screw Single mixing shaft with adjustable paddles, dual execution Motor 2 x 18,5 Kw - 978 rpm Liquid and dry ingredient supply Inspection and cleaning hatch Mixer VM210 ± 150L Single mixing shaft execution with adjustable paddles Motor 1.5 KW - 1461/64 rpm Extruder BR220 Dual execution, 2 extrusion heads Motor 2 x 37Kw - 1482 rpm Gusdpfo Agvygox Acmoi Gearbox Sumitomo Cyclo Double-walled extruder housing, suitable for cooling Production capacity (Pet food) calculated at 30-40 kg/min (depending on the product) Operating pressure ± 30-40 bar depending on the die Powered cutting head/chopping knife (motor 1.1 Kw -920 rpm) Dimensions (L x W x H): 5.000 x 2.200 x 2.400 mm Possibility to run 2 separate products, 2 extrusion lines on 1 frame. without electric cabinet and controls

Condition: good (used), Extrusion Line with Extruder & Co-Extruder. Sheet configuration B/A/B used for PP. Direct cooling unit (SMK) and SBI measuring unit newly installed in 2015. * Max. output: 1350 kg/h * Main screw output: 950 kg/h * Main screw: 180mm / 33D * Co-extrusion output: 400kg/h * Co-extruder scew: 120mm / 33D * Die width: 650mm * Roll stack: 3 * Winding unit for Jumbo rolls up to 1500kg This Extrusion Line is already disassembled and secured for transport (Location: Waalwijk, Netherlands). Gjdpfxjn Utt Ho Acmeui