Used Extruder Garden for sale (589)

Condition: new, empty load weight: 123 kg, maximum load weight: 627 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,006 mm, loading space width: 1,256 mm, loading space height: 777 mm, loading space volume: 1.4 m³, tire size: 13, wheelbase: 155 mm, color: grey, Year of construction: 2024, Equipment: trailer coupling, SHIPPING IS POSSIBLE TO GERMANY, AUSTRIA, FRANCE, ROMANIA, ITALY, IRELAND, BELGIUM, THE CZECH REPUBLIC, DENMARK, AND THE NETHERLANDS. UT004501 The UNITRAILER Garden Trailer 201 TIPPING car trailer, with a GVWR of up to 750 kg, features a folding rear and front side panel, allowing for loading and unloading in just a few minutes! Thanks to the use of a tilting drawbar, it can be positioned vertically on the rear side panel at any point. All formalities related to the purchase will be taken care of for you. When ordering a car trailer, please specify the GVWR of the vehicle that will be used to tow the trailer. Available optional equipment: Podpeir H Rwsfx Ac Aorb * additional side panels * high drop-side with tarpaulin, 80 cm * brackets for attaching tie-down straps * anti-theft device * spare wheel Technical data of the Garden Trailer 201 TIPPING car trailer: CHASSIS - steering axle from Knott or AL-KO Tire size: 155/70 R13 Tilting V-drawbar, which can be folded under the trailer's base plate at any time BODY - load-bearing frame made of hot-dip galvanized sheet steel Curved profiles are used with screws Loading area: non-slip and water-resistant screen-printed base plate, 9 mm thick SIDE PANELS - all side panels are made of galvanized steel. Total height of the side panels: 70 cm Shipping costs will be charged separately.

Condition: new, empty load weight: 130 kg, maximum load weight: 620 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,304 mm, loading space width: 1,256 mm, loading space height: 777 mm, loading space volume: 3.6 m³, tire size: 13, wheelbase: 155 mm, color: silver, Year of construction: 2023, Equipment: trailer coupling, SHIPPING IS POSSIBLE TO GERMANY, AUSTRIA, FRANCE, ROMANIA, ITALY, IRELAND, BELGIUM, THE CZECH REPUBLIC, DENMARK, AND THE NETHERLANDS. UT004191 The Garden Trailer 230 TILT car trailer from UNITRAILER, with a maximum permissible weight of up to 750 kg, features a folding rear gate, allowing for loading and unloading in just a few minutes! The tilting drawbar allows it to be positioned vertically on the rear gate at any point. All formalities related to the purchase will be handled for you. When ordering a car trailer, please specify the maximum permissible weight of the vehicle that will be used to tow the trailer. Technical data of the Garden Trailer 230 TILT car trailer: CHASSIS - Steering axle from Knott or AL-KO Tire size: 155/70 R13 Tilting V-shaped drawbar, which can be folded under the trailer floor at any time BODY - Load-bearing frame made of hot-dip galvanized sheet steel Curved profiles were used with screws Loading area: non-slip and water-resistant screen-printed plywood floor, 9 mm thick SIDE PANELS - All side panels are made of galvanized steel. Total height of the side panels: 70 cm Prjdpfx Aceir H R Te Asb Shipping costs will be charged separately.

Year of construction: 2003, condition: reconditioned (used), Stock - No. 2651 1 used underwater pelletizing unit, partially overhauled in 2023 Throughput up to approx. 450 kg/h depending on the material, consisting of: Type BKG ( Nordson ) Start-up valve with hydraulic station Podpfjiyyf Iex Ac Aerb Granulator type A300 including die-plate and cutter bar, drive 4.4 kW by-pass system TVE 1000 ED pellet-dryer drive 4 kW incl. Agglomerate catcher Tempered water system with Water box 200 liters, installed heating capacity 9 kW Water pump 2.2 kW with 15³/h heat exchanger Control unit - NEW Further UWP pelletizing units are available ex workshop in Wuppertal-Germany ( as Gala, BKG Nordson, Econ ) Available from the Wuppertal warehouse: complete compounding, pelletizing extrusion lines, with single-screw or twin-screw extruder.

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: 2846, We offer, successfully since more than 12 years, installed in all over EU, our new compounding extruders/lines : e.g. Type Alphatec AD-.S 75 with: Segmented, Co-Rotating intermeshing, cylinder water / medium cooled Prodpfsi Dtbijx Ac Aob Throughput performance up to 1000 kg/h - depending on the material Drive 132 kW - 250 kW L/D Ratio - according to processing needs Degassing zones - as desired Side feeder type ZS-B - as desired OPTIONAL: > Melt filter/screen changer > Pelletizing systems: strand ST- , water ring WRG or Underwaterpelletizing UWP > Screw configuration according to your needs > Material dosing: volumetric or gravimetric > further accessories Visit us at our Wuppertal plant. Trail-run with your material-mix possible, darte and details uopn request.

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: 2846, Stock No. 2846 Demonstration line, Compounding Extruder Type Alphatec AD-.S 75 with: Segmented screws, co-rotating, intermeshing screw design Cylinder water/medium cooled/temperature-controlled Throughput up to 1200 kg/h - material-dependent Drive 250 kW - AC 48 L/D R+W safety gear coupling 3x degassing zones, 1x vacuum pump with condensate separator 2x side feeders type ZS-B Siemens Touch HMI control OPTIONAL: > Melt filter/screen changer > pelletizing systems: ST strand, WRG water ring, or UWG underwater pelletizing Prsdpfx Asi Dtb Ajc Asb > Screw configuration according to your requirements > Material dosing/blending : volumetric or gravimetric > Additional accessories Visit us at our Wuppertal plant. The system is ready for demonstration, test run date with your material after arrangement

Condition: excellent (used), functionality: fully functional, Enhanced finishing solution for metal 3D printed components Prjdpfjv Awrwsx Ac Asb EXTRUDE HONE technology opens the door to a very economical, fast, controllable, flexible, and environmentally friendly process for enhanced surface finishing of metal 3D-printed parts. We have a used machine in stock for immediate delivery. This machine has only been used briefly and is in excellent condition. FEATURES and BENEFITS + Efficiency in enhanced surface finishing. Material removal rate (μm/min) faster than other methods on the market; e. g. up to 3 times faster than electro-polishing. + Tooling out of the printer. Tooling and fixtures are built at a reasonable cost since they are 3D-printed. + Highest flexibility. We provide a complete & optimized cathode and fixture design for your components within two working days. + Multiple material master packages Specific parameter files per alloy family. + EXTRUDE HONE Connect From CAD to part, remotely: loading of parameters, upgrading material packages, software, and maintenance. + Make it easy. The all-new and simple operating concept limits the data input to 4 simple parameters – parameters everybody understands.

Condition: like new (used), functionality: fully functional, Year of construction: 2025, ⭐ 10-Foot Sea Container AS NEW ⭐ Storage Container Description: Perfectly suited as a storage container, site container, material storage, or for garden use. The container is robust, durable, and wind & waterproof – ideal for the secure storage of tools, materials, or furniture. External dimensions: • Length: 2.99 m • Width: 2.44 m • Height: 2.59 m Details: ✅ As-new condition ✅ Stable steel construction Double-wing door with locking mechanism ✅ Immediately available ⤴️ Additional services on request: Custom modifications such as conversions, repainting, and much more available ⚡️ Fast delivery possible, including unloading Provide postcode for a non-binding quote _____ ✅ We are happy to provide you with a tailored offer. Pedpfsy Dfx Tsx Ac Aorb

Condition: ready for operation (used), Year of construction: 2021, overall weight: 97 kg, travel distance X-axis: 300 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 200 mm, number of axes: 3, This 3-axis DESKTOP METAL Metal Studio 2 was manufactured in 2021. It utilizes Bound Metal Deposition technology and features a build volume of 300 x 200 x 200 mm. The machine supports various materials, including 316L and H13 Tool Steel, and operates with a dual extruder system. If you are looking to get high-quality metal 3D printing capabilities, consider the DESKTOP METAL Metal Studio 2 machine we have for sale. Contact us for further details. • Technology: Bound Metal Deposition (BMD) • Process: 2-step (printing and sintering – no debinder needed) Predpfx Aceyuyz Ne Aeb • Build volume: 300 x 200 x 200 mm • Layer height: 50 µm to 250 µm • Build plate: Heated up to 120°C (vacuum-adhered) • Extruders: Dual (metal and ceramic support) • Support interface: Ceramic release layer (manual breakaway) • Materials: 316L, 17-4 PH, 4140, H13 tool steel, copper • Software: Fabricate (automated scaling and sintering profiles) • Connectivity: WiFi / Ethernet Additional equipment • Furnace: Max temperature 1400°C; atmosphere: partial pressure Synthogas (Ar/H2); sintering cycle: 16–24 hours

Condition: used, Year of construction: 1993, operating hours: 57,000 h, functionality: fully functional, rotational speed (min.): 1,413 rpm, input voltage: 400 V, Industrial DC Electric Motors 481 kW – IEG / Ansaldo Available: 2 high-power industrial direct current (DC) electric motors, manufactured by IEG Trieste – Ansaldo Industria, designed for heavy-duty industrial applications. The motors have been dismantled from an industrial plant and are in excellent condition, complete with dedicated ventilation systems and control panels. Ideal for the revamping of existing plants, rolling mills, extruders, large fans, hoisting installations, or other industrial high-torque applications. Main technical data: Manufacturer: IEG Trieste – Ansaldo Industria Type: Direct current (DC) motor Power: 481 kW Voltage: 400 V Rated current: 1530 A Speed: 1413 rpm Duty: S1 continuous Excitation: 220 V Psdpfx Aceytgk Is Aerb Year of manufacture: 1993 Operating hours: approx. 57,000 Equipment included: - Dedicated ventilation system - Electrical control and command panels - Technical documentation available On-site inspection possible

Condition: like new (used), Year of construction: 2025, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 1630, overall weight: 7,800 kg, warranty duration: 6 months, power: 85 kW (115.57 HP), Complete production line for sale, based on a Di Più BRIK MB100 briquetting press (complete production line). Fully refurbished DI PIU BRIK MB100 machine (factory-refurbished in 2025), ready for immediate operation. The machine is designed for high-capacity briquetting and is suitable for demanding industrial applications. The machine has approximately 2,000 operating hours. It has been newly refurbished at the Di Più factory: all vital components have been replaced, including all cables, electrical wiring, and required electrical equipment. The machine is brought to as-new condition and comes with a 6-month Di Più factory warranty. The machine can produce briquettes with or without a hole, with a diameter of 90mm to 110mm, using soft or hard wood, in either round or square shapes. Machine inspection is possible at the factory in Italy: Di Più Systems Srl, Via dell’Innovazione 11, 36042 Breganze (VI), Italy. Pjdpfswrp Emex Ac Ajrb The Di Più BRIK MB100 mechanical briquetting press is an automatic machine for compacting wood, sawdust, and other waste materials into wooden briquettes. The ideal humidity of the input material is between 8% and 12%, and the particle size between 1mm and 12mm. Technical data: - Production capacity: 1,300 – 2,300 kg/h (for sawdust density 160–200 kg/m³) - Briquette diameter: 90 – 110 mm - Main motor power: 75 kW - Total installed power: 98 kW - Piston compression pressure: 2,000 – 2,500 kg/cm² - Vertical screw with gearbox: 5.5 kW - Oil pump: 1.5 kW - Oil pump for extruder head closure: 1.5 kW - Feeder with screw and adjustable speed: 1.5 kW - Oil system for bronze bearing lubrication: 100 liters - Briquette output monitoring sensor (automatic shutdown when material supply runs out) - Safety covers for moving parts - Oil pressure sensor - Control cabinet - Input material storage hopper (buffer) - Level sensor for feed system monitoring - Machine weight: approx. 7,800 kg The machine is equipped with all necessary accessories for complete operation and integration into a briquetting line: ACCESSORIES – MB100: - Dosing silo: Made of heavy-duty steel. Diameter: 1,500 mm, height: 1,000 mm. Equipped with a rotary cutter with 2.2 kW gearbox, mounted on a robust steel frame. Material supply is monitored by a level sensor. - Briquette cooling line after extrusion, total length 20 meters - Automatic briquette cutting saw - The saw automatically cuts briquettes to the operator's preset lengths - Device for producing briquettes with a hole - Machine head cooling system with ice water - The system produces 50 liters/min of ice water for effective briquetting head cooling. - Air-cooled water chiller with hermetic scroll compressors, microprocessor control, and a large energy storage tank with an immersed water-to-refrigerant heat exchanger. - The heat exchanger is a high-efficiency fin-pack type, made of copper pipes and aluminum fins. - Water tank with a capacity of 800 liters - Water feed pump (50 l/min – 20 m.w.c. – 0.55 kW) with three-circuit DN25 valves for regulating cooling water temperature at the briquetting head - Digital electronic temperature controller connected to an NTC sensor (measuring element d.6 × 52 mm, IP68, AISI 316) OPTIONAL: NOVAPAC packaging machine Possibility to purchase an additional NOVAPAC packaging machine, fully compatible with the Di Più BRIK MB100 and other machines. An ideal solution for automatic packaging immediately after briquetting. Year: 2013 Price for Novapac: €19,000 Equipment visible in the las

Condition: new, Year of construction: 2026, Petrol Wood Chipper R1500 The R1500 petrol wood chipper is a powerful and robust branch shredder designed for professional users involved in wood processing and disposal. Equipped with a reliable DUCAR engine with a displacement of 420 cm³ and a power output of 15 HP, it provides high efficiency and durability in both industrial and service applications. The machine allows fast processing of wood material into chips with a size of 20–40 mm, which can be used as fuel, compost material, or garden mulch. Main advantages of the machine High power and performance – the DUCAR OHV petrol engine ensures optimal operating parameters and long service life. Durable construction – the use of a cast iron cylinder sleeve increases wear resistance and improves lubrication. Advanced safety features – automatic ignition cut-off system and emergency safety switch located in the feed hopper. Easy operation and transport – folding feed hopper and large 45 cm diameter wheels make handling and mobility easier. Versatile applications – suitable for shredding both fresh and dry wood of various hardness levels. Design and technology The R1500 wood chipper is equipped with a belt drive system and centrifugal clutch, ensuring smooth and safe power transmission to the cutting drum. The knives are manufactured from Hardox 500 steel, which provides exceptional resistance to abrasion and significantly extends service life while reducing the need for frequent replacement of cutting components. The feed hopper is positioned at an optimal angle to facilitate material loading, while the 360° rotating discharge chute allows precise direction of the chip stream. The self-feeding drum design improves efficiency and minimizes the need for manual material pushing. Precision and working efficiency The 15 HP engine, high drum speed of 2000 rpm, and two cutting knives ensure uniform and efficient branch processing. The chipper can handle: fresh softwood up to 120 mm in diameter, fresh hardwood up to 100 mm in diameter, dry hardwood up to 80 mm in diameter. This allows effective processing of various types of wood while maintaining high-quality chips. Applications The R1500 model is an ideal solution for companies involved in landscaping, agricultural farms, municipal services, and businesses processing wood waste. It is also suitable for sawmills and biomass production companies. The produced wood chips can be used in heating systems, as compost material, or as garden mulch. Standard equipment DUCAR petrol engine 420 cm³ / 15 HP Hardox 500 steel cutting knives Belt drive system Feed hopper with folding extension 360° rotating discharge chute Safety system with ignition cut-off Technical specifications Parameter Specification Drive system V-belts, centrifugal clutch Engine 15 HP, 420 cm³ Maximum cutting diameter (fresh softwood) 120 mm Maximum cutting diameter (fresh hardwood) 100 mm Predpfx Ajvxtd Usc Aob Maximum cutting diameter (dry hardwood) 80 mm Number of drum knives 2 Knife type Hardox 500 steel Material feeding Self-feeding drum Dimensions (L × W × H) 180 × 82 × 130 cm Feed hopper dimensions 57 × 52 cm Discharge chute rotation 360° Discharge chute height 130 cm Wheel diameter 45 cm Drum speed 2000 rpm Chipper weight 230 kg

Condition: new, Year of construction: 2026, functionality: fully functional, power: 198 kW (269.20 HP), Plastic squeeze dryers / Agglomerators are a vital part of plastic film washing lines. Pjdpfx Acowg Sgcj Aerb Washed films retain up to 40% moisture normally after exiting the wash process. High humidity will be affecting the efficiency and production of the following extrusion pelletizing process. Having a plastic squeeze dryer/Agglomerator is a must to dehydrate the washed film and increase the density of recycled film and fibre material. This also will increase the capacity of the extrusion process and further refine the quality of final plastic pellets. Even the water-washed plastic film processed through a spin-dryer still contains over 10% moisture which would be uneconomic to agglomerate on a conventional batch agglomerator. By redusing the moisture so significantly the productivity of the extruder and quality of pellets is increased exponentially. The latest development for drying and simultaneously agglomerating washed film are plastic film squeeze dryers which could reduce moisture to the minimum and the resultant squeezed material only contains maximum 3%, and more usually 1%, residual moisture. Much cheaper to operate than hot air drying where materials are still in lightweight flake form, and better result as the output materials are continuously agglomerated direct from washing lines with +40% fluids on entry to the dryer, to output dense free flowing agglomerate. In this form it is not necessary to have cutter compactor extruders saving more energy, as the materials are so dry and dense they can be fed direct to extruders for pellet production. With over 30 years of producing recycling dryers and extruders GENIUS have sold more than 600 of these driers to the plastics recycling market. ..There are 4 models in the range with production between 250 kgs per hour up to 1200 kgs per hour.

Year of construction: 2025, condition: new, functionality: fully functional, The ASCO® VS BIG vibrating screen offers a robust and powerful platform for a wide range of screening tasks. Featuring two vibrating motors, it is particularly practical for recycling companies and businesses in the construction, agricultural, and gardening sectors, where many different materials must be processed within tight time frames. Technical specifications: System capacity: 40-90 t/h Maximum bucket width: 3 m Screening area: 6.4 m² Drive power: 400 V / 2 x 0.9 kW Prsdpfewhl Rqsx Ac Ajb Weight: 2160 kg Width: 3.62 m Length: 2.41 m Height: 2.85 m Loading height: 2.32 m Options: - Rods - Hopper - Support feet

Condition: excellent (used), functionality: fully functional, mileage: 1 km, lifting height: 5,000 mm, drive condition: 80 %, chain condition: 95 %, mast type: telescopic, Year of construction: 2025, operating hours: 5 h, Equipment: all wheel drive, I am offering a brand new Zoomlion ZE20GU crawler excavator with an operating weight of 2 tons. The machine is available immediately and is ideal for gardening, paving, installation, and light earthmoving tasks. - Year of manufacture: 2025 - The Kubota D1105 engine is reliable, fuel-efficient, and compliant with the latest emission standards - The cab provides a high level of operator comfort, featuring air conditioning, an ergonomic seat, and excellent visibility - A variable displacement piston pump with swash plate delivers a maximum flow rate of 42 liters per minute - The machine comes factory-equipped with a quick coupler and a complete hydraulic system for operating additional attachments, such as a hydraulic breaker or grapple - Bucket set includes: 30 cm and 40 cm digging buckets, 100 cm grading bucket - Maximum digging depth is approximately 2.5 meters - Buckets can be ordered separately to suit your exact requirements - The excavator is highly maneuverable, precise, and ready for immediate work - Comes with manufacturer’s warranty - Invoice will be issued - The machine is available immediately; personal collection in Kolbudy or nationwide delivery possible Podpfx Ajwhn Tzec Asrb Comparable to: Kubota, Caterpillar, JCB, Yanmar, Sany, Bobcat.

Condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 525389e4-9874-4408-810c-82126df2811f, Year of construction: 2020, operating hours: 7,508 h, overall weight: 75 kg, inner dimension height: 180 mm, inner dimension length: 300 mm, inner dimension width: 220 mm, Equipment: CE marking, Hardly used showroom complete system consisting of the following components: Markforged Metal X 3D printer Markforged Wash 1 debinding station Markforged Sinter 2 industrial sintering furnace & additional accessories Markforged Metal X Predpfxsx I Rfge Ac Aob TECHNICAL DETAILS Build volume: 300 x 220 x 180 mm Printing process: Atomic Diffusion Additive Manufacturing (ADAM) Print chamber: Heated Build plate: Heated, vacuum-sealed, with automatic leveling Printing system: Dual extruders – metal material and release material Print materials: Stainless steel 17-4 PH, 316L, tool steel H13, A2, D2, Inconel 625, copper, titanium-6Al-4V Media supply: Filament feed, bound powder material Part Features Maximum part size: 250 x 183 x 150 mm Layer thickness: 50 microns and 125 microns MACHINE DETAILS Dimensions & weight Dimensions: 575 x 467 x 1,120 mm Weight: 75 kg Software: Eiger Cloud Printer power supply: 100–240 V / 50–60 Hz / 12.6 A Certifications: CE, FCC, UL, RCM, UKCA Safety features: Two-factor authentication, organizational admin access, single sign-on EQUIPMENT Argon gas control with pressure reducers and quick couplings Original Markforged transport case with spare build plates Mobile castors Isolation transformer

Year of construction: 2019, condition: like new (used), Automated system to laminate reel of chromotography paper between 2 reels of polyester handle material and on to profile the chromotography paper tip and then cut the web of laminated polyester with chromotography paper into single profiled strips. The Matrix 7100 Laminator was developed to meet the demanding requirements of the lateral flow test strip industry for a moderately priced system capable of supplying the membrane lamination needs of the moderate to high volume production facility. The unit was designed to allow process flexibility while at the same time optimizing product yields and throughput. Numerous options are available allowing the system to support a wide variety of material types, lamination configurations and process variables. The Matrix 7100 allows for continuous lamination of membranes onto a plastic backing web and the cutting of the resultant laminate into discrete cards for further processing on other, downstream equipment. Numerous options provide the utmost in process flexibility at a very low overall cost. Prjdpeya H S Sefx Ac Aob The integral touch screen operator interface terminal provides for multiple recipe storage and simple and reliable setup and operation while simplifying process validation. Key Features Touch screen operator interface terminal for simple setup and operation Simple web guide adjustment Rapid changeover to support multiple products Flexible to support changing requirements Base configuration supports Backing Web with Release Liner plus 4 membranes Extruded aluminium structural frame Flying shear for continuous card cutting Reel to reel lamination option

Condition: good (used), functionality: fully functional, power: 52 kW (70.70 HP), nominal power: 45 kW (61.18 HP), overall weight: 330 kg, For sale: AEG AM225M4 Electric Motor – 45 kW Location: Ivanka pri Nitre, Slovakia Price: 1,000 EUR Used three-phase electric motor, type AEG AM225M4, rated at 45 kW / 400 V / 50 Hz (52 kW at 60 Hz). The motor is in good mechanical condition and has been stored indoors. Suitable for industrial applications, pumps, extruders, or general heavy-duty machinery. Prsdpfxjxvq Dvj Ac Aeb Inspection possible by appointment. Contact for more information or photos.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: SN 1171, workpiece weight (max.): 450 kg, working height: 870 mm, feed rate Y-axis: 45 m/min, working width: 300 mm, warranty duration: 12 months, total length: 1,900 mm, height adjustment type: mechanical, overall weight: 450 kg, total height: 1,500 mm, total width: 1,300 mm, compressed air connection: 6 bar, Equipment: documentation/manual, The APACHE 3 is a cost-effective solution suitable for both craft and industrial applications, specifically designed for coating facade claddings and their supporting substructures. It is perfectly suited—without limitation—for coating profiles with cross-sections of 300 mm x 25 mm, providing flawless surfaces in a highly efficient and cost-saving manner, requiring no special prior knowledge from the operator. This unit can also be integrated into automated systems or coating lines. It can coat boards, profiled boards, tongue-and-groove boards, rhomboid profiles, laminated timber, and structural timber, as well as decking, garden, log cabin, sauna or privacy screens. Essentially, it's ideal for any product requiring a premium-quality visible surface. Substructures (typically black) can also be coated with low-viscosity, highly pigmented stains containing wood preservatives—even without lateral brushes. The APACHE 3 distinguishes itself from standard market products by its robust monoblock steel welded frame and a coating applied using a baking process with extremely resistant Teflon (enamel). This non-stick coating ensures self-cleaning, making the machine extremely low-maintenance. The machine offered is brand new and available for demonstration in our showroom. We would be pleased to demonstrate our machines and systems either on-site or at customer locations in your vicinity. For further information and a detailed description, please visit our SARMAX website. APACHE 3 Serial number: SN 1171 Flood coating unit with three (3) brushes Working width: 300 mm Working height: 100 mm Pjdoxhquxjpfx Ac Aerb Minimum workpiece length: 100 cm Feed speed, frequency-controlled: 10–45 m/min Number of driven transport rollers: 3 Diameter of transport rollers: 80 mm Brush arrangement: two (2) from above, one (1) from below Diameter of brushes: 160 mm Central brush drive: 2.2 kW Compressed air blow-off left/right, fan nozzles to clear tongue-and-groove: 80 l/min Double diaphragm pump: 90 l/min Compressed air consumption: 600 l/min Connection: CEE plug 16 A 400/50/3 V/Hz/P E Total power: 4.5 kW Working height: 900 +/- 50 mm Approximate weight: 450 kg Operation: via control and indicator devices according to VDE, hydraulic ball valves Dimensions (L/W/H): 1,900 x 1,300 x 1,500 mm Standard: CE Color, design: grey 7046 RAL

Year of construction: 2004, condition: excellent (used), functionality: fully functional, SICA SOCKETING MACHINE BA.2F.1T. 63-315 Application: KG-U PVC pipes, Predpfxoxiy Nue Ac Ajb Pipe lengths: 0.5m, 1m, 2m, 5m, 6m Year of manufacture: 2004 1 socket per cycle Socket tool: 160x4.6 The socketing machine is in very good condition, still in operation, and will be removed from production in 3-4 months.

Year of construction: 1996, condition: excellent (used), film width: 1,300 mm, Used single-layer blown film extruder for sale in excellent condition, featuring a 150 mm die diameter and a production capacity of up to 100 kg/h. Model: Queens EP-65N Processable materials: LLDPE/LDPE/MDPE/HDPE/other blends. Screw diameter: 65 mm Head: • Blown film die head • Die diameter: 150 mm Die gap: 1.2 mm Pedpfx Ajxrb Hmjc Asrb Output: Up to 100 kg/h, depending on material composition • Maximum speed: 120 m/min • Winding width: 1300 mm - Flying knife roll slitting Accessories included: • Tower • Gravimetric weight control system • Masterbatch dosing unit • Calibration cage The machine can be inspected in operation. Offered with spare parts.

Condition: new, functionality: fully functional, MIKROMOLD desktop injection molding machine It was not used, NEW. It is electrically driven and suitable for individual and series production of small plastic parts. The machine requires small space. Parameters: Pedpsxrcq Hofx Ac Ajrb Closing force: 30kN Piston diameter: 20mm Dose: cca15g Tool: width 75-120 mm, hight min. 80 mm, length 75-120 mm Dimensions: hight 1100 mm, width 310 mm, length 850 mm Weight: 60 kg Heating: 730W Injection molding: max. 700bar Energy demand: 230V; 50Hz Power requirements: 240V; 50Hz Materials used: General plastics + macromelt Control: card PC Machine handling: 7-inch touch screen (HMI) for data entry and status display, two-hand start and emergency button Data management: 40 program saves Material feeding: From a tank on the machine, gravity-fed The manufacturer's complete manual is available for the machine. Application areas: Due to the incredible versatility of injection molding, it can be found in almost every industry. Automotive industry - one of the largest users Cars contain many plastic parts, such as bumpers, dashboards, door panels, light housings, under-the-hood components (e.g. intake manifolds, tanks), and smaller interior components such as buttons and switches. The use of plastics contributes to reducing the weight of vehicles, which results in fuel efficiency and lower emissions. It is particularly important in the medical and pharmaceutical industries, for the production of disposable medical devices such as syringes, petri dishes, catheter connectors, drug dispensers and diagnostic test housings. Electronics industry - for the housings, connectors, buttons and other precision parts of devices, e.g. plastic housings of mobile phones, laptops, televisions and household appliances. Consumer goods and household appliances - toys (e.g. LEGO), kitchenware, furniture, sports equipment and most garden tools. Housings, handles and internal parts of household appliances such as washing machines, vacuum cleaners and coffee makers. Packaging industry - bottle caps, food containers, buckets, crates and other packaging materials Construction industry - pipe connectors, fittings, switch and socket covers, insulation elements and other profiles. PVC and PP are common in this application area, where durability, chemical resistance and ease of installation are the main considerations. Agriculture - elements of irrigation systems, machine covers, tank and other equipment parts. Corrosion resistance and durability are key here.

Condition: ready for operation (used), Year of construction: 1995, operating hours: 39,000 h, functionality: fully functional, Equipment: documentation/manual, A used and functional profile line for rigid PVC-profiles (300 x 100 mm), consisting of: Twin-screw extruder (parallel) Manufacturer: WEBER Type: DS 7.22 Year of manufacture: 1995 Machine no.: DS70-043 Operating hours: 39,000 hours Screw diameter: 70 mm Effective screw length: 22 x D Screw geometry: for rigid PVC profiles Torque: 4,500 Nm per screw Screw speed: max. 40 rpm, continuously adjustable Drive motor: DC low-voltage motor, thyristor-controlled Drive power: approx. 25 kW Cylinder heating/cooling zones: 5/3 (air cooling with fan) Pjdpfx Aeyhcaboc Ajrb Adapter heating zone: 1 Tool heating zones: 5 Control: conventional control with digital temperature controllers Degassing: Busch rotary vane vacuum pump (1.5 kW) Output capacity, max.: 120-150 kg/h for hard PVC, depending on material Connected load: approx. 50 kW (without tool) Special accessories: Mass temperature sensor and mass pressure sensor Adapter between extruder connection and extrusion tool Used tool set for a window profile (widening), consisting of: - Extrusion tool ‘widening’, incl. heating bands - Dry calibration - Vacuum tank approx. 2 m long, with 8 slots for calibration discs - 16 calibration discs Vacuum calibration unit Manufacturer: Uniplast / Greiner Type: CAL VAK 4P Year of manufacture: 1992 Machine number: K9209590 Total length: 6500 mm Vacuum pumps: 4 x Speck vacuum pumps (4.3 kW each) Water circulation pumps: 2 x Calpeda (1.1 kW each) Caterpillar haul-off, incl. attached saw Manufacturer: Uniplast / Greiner Type: CAT PUL 2D Year of manufacture: 1992 Machine number: R 9204546 Haul-off: Effective contact length: 2000 mm Pad width: 250 mm Haul-off force, max.: approx. 25000 N Speed range: approx. max. 10 m/min. Profile saw: HM circular saw blade: Ø 450 mm Profile cross-section, max.: approx. 300 x 100 mm Tilting table Manufacturer: Ide Type: ME N 52/2 Year of manufacture: 1994 Length: 6000 mm Support width: 270 mm Note: The complet profile line was overhauled in 2020 and has only been in operation for 325 hours since then.

Condition: new, functionality: fully functional, power: 3.1 kW (4.21 HP), operation weight: 147 kg, Year of construction: 2026, Equipment: UVV, Wacker Neuson AP 2560e Battery-Powered Vibratory Plate - NEW Wacker Neuson AP 2560e Battery-Powered Vibratory Plate – NEW | 25 kN Centrifugal Force | 600 mm Working Width | 3.1 kW Electric Motor Article number: 5100048488 Technical data: Manufacturer: Wacker Neuson Model: AP 2560e Condition: NEW Operating weight: 147 kg Frequency: 98 Hz Centrifugal force: 25 kN Working width: 600 mm Motor: Maintenance-free electric motor Motor power: 3.1 kW Fuel: Battery (Li-Ion) Starting system: Electric start Compaction class: Medium compaction Special feature: emission-free & low noise – ideal for inner-city construction sites Prodpfjzxugtox Ac Aeb Highlights & Features: - Battery-powered vibratory plate with high compaction performance - Maintenance-free electric motor – durable & efficient - 600 mm working width – ideal for larger areas - Emission-free operation – perfect for environmental zones & indoor areas - Ergonomic guide handle – low vibration & comfortable - Made by Wacker Neuson – proven quality & immediately available Application areas: ✓ Paving & driveways ✓ Garden & landscaping ✓ Foundation & trench compaction ✓ Municipal applications & construction companies ✓ Construction sites with emission restrictions Options: Machine without battery & charger: €2,675.00 plus VAT. Additional costs only in combination with the machine: - Battery BOB 10 Li-Ion (1,008 Wh / 51 V): €1,155.00 - Battery BOB 14 Li-Ion (1,400 Wh / 51 V): €1,470.00 - Fast charger BOC 13 (charging time 1 hour / 13.5 A): €825.00 - Standard charger BOC 7 (charging time 4 hours / 7.5 A): €245.00 - EquipTrack Beacon: €49.00 ➡️ EquipTrack is a Bluetooth-based system for recording operating data such as operating hours, maintenance intervals and emissions. The data is transmitted wirelessly to the Wacker Neuson app and displayed clearly there. Location: Warehouse D-46514 Schermbeck (North Rhine-Westphalia) – Inspection & collection possible Delivery: nationwide & international on request Pricing: ex warehouse Maassenstraße 91, D-46514 Schermbeck (District of Wesel) All information without guarantee. Errors and prior sale reserved. Prices plus VAT Other models & battery systems available! ➡️ Battery-powered vibratory plates, chargers & accessories from Wacker Neuson Buy Wacker Neuson vibratory plate | AP 2560e NEW | Battery-powered vibratory plate 25 kN | emission-free compaction | Vibratory plate with electric motor | 600 mm working width | Wacker Neuson battery technology | Battery-powered vibratory plate | Vibratory plate for environmental zones Your reliable partner for compaction technology & battery-powered machines: Claudio Macagnino Baumaschinen & Nutzfahrzeughandel GmbH ➡️ Request now & secure immediately available new goods! If required, we will be happy to arrange a virtual inspection of the machine via video call.

Condition: good (used), functionality: fully functional, empty load weight: 588 kg, maximum load weight: 1,912 kg, overall weight: 2,500 kg, axle configuration: 2 axles, first registration: 02/2018, next inspection (TÜV): 01/2027, loading space length: 3,000 mm, loading space width: 1,400 mm, color: silver, trailer brake: trailer braked, Year of construction: 2018, Humbaur HS25 30 14 Construction Machinery Trailer Humbaur HS25 30 14 Construction Machinery Trailer | Total weight 2,500 kg | Payload 1,912 kg | Loading area 3000 x 1400 mm Technical data: Manufacturer: Humbaur Model: HS25 30 14 Condition: Very well maintained First registration: 02/2018 TÜV (technical inspection): valid until 01/2027 Total weight: 2,500 kg Payload: 1,912 kg Dimensions of loading area: 3,000 x 1,400 mm Equipment: split loading ramps, car trailer hitch Highlights & Features: - Robust construction machinery trailer for small to medium-sized machines - Split loading ramps for easy loading - Car trailer hitch for flexible transport options - Very well-maintained condition – immediately available - Optimal loading area for construction machinery and materials - Made in Germany – reliable & ready for use Application areas: ✓ Transport of construction machinery ✓ Material and equipment transport on construction sites ✓ Construction companies, trades & municipalities ✓ Garden & landscaping ✓ Professional machinery rental ✓ Approved for cars and trucks Location: Warehouse D-46514 Schermbeck (North Rhine-Westphalia) – inspection & collection possible Delivery throughout Germany & internationally on request Pjdpfxozuc Tye Ac Ajrb Price quoted ex warehouse Maassenstraße 91, D-46514 Schermbeck (Wesel district) All information without guarantee. Errors and prior sale excepted. Prices plus VAT. Other construction machinery trailers also available ➡️ New & used machines, accessories & spare parts Buy Humbaur HS25 30 14 | Construction machinery trailer 2,500 kg | Professional trailer | Loading area 3000 x 1400 mm | Trailer with loading ramps | Car trailer hitch | New Humbaur trailer | Transport construction machinery Your reliable partner for construction machinery trailers & transport solutions: Claudio Macagnino Baumaschinen & Nutzfahrzeughandel GmbH ➡️ Inquire now & secure immediately available new goods! If required, we will gladly arrange a virtual inspection of the trailer via video call.

Condition: new, functionality: fully functional, empty load weight: 1,600 kg, Year of construction: 2026, For sale: JKW-16 tracked mini excavator with an 18.4 kW diesel engine. The machine's operating weight is 1600 kg, and the maximum digging depth is 1800 mm. The excavator features a 360° rotation, a cabin, and work lights. A significant advantage of this machine is its extendable tracks, which allow the excavator to be narrowed for passage through tight spaces, gates, or openings, and then widened to increase the track gauge and provide more stable operation during digging. This excavator is ideal for construction, earthmoving, gardening work, and digging trenches for installations, cables, and pipes. Technical specifications: Predpfx Aozudq Hsc Aeb * Model: JKW-16 * Engine: Diesel * Power: 18.4 kW * Operating weight: 1600 kg * Digging depth: 1800 mm * Dimensions: 2270 × 1100 × 2270 mm * Bucket capacity: 0.04 m³ * Tracks: rubber, extendable * Rotation: 360° 🎁 FREE INCLUDED: * Narrow bucket – ideal for digging trenches for installations, cables, and pipes, * Wide ditching bucket, * Standard bucket installed on the excavator.