Used Extruder Garden for sale (558)

Year of construction: 1993, operating hours: 2,466 h, condition: good (used), machine/vehicle number: 330,2135,01, Brand: Leistritz AG Model: Micro 27/40 D Gtjdpfxju Aqdko Afnju Type screw: Double screw Year of construction: 1993 Screw Ø: 27 mm L/D Ratio: 40 Working hours: 2.466

Condition: new, empty load weight: 140 kg, maximum load weight: 610 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,304 mm, loading space width: 1,256 mm, loading space height: 1,100 mm, operation weight: 750 kg, Car trailer UNITRAILER Garden Trailer 230 KIPP [with support wheel, blue high tarpaulin and high bows] Transport trailer UNITRAILER Garden Trailer 230 KIPP is the latest product from UNITRAILER. It is currently our largest car trailer with a maximum permissible weight of up to 750 kg. The trailer has a folding tailgate, which enables loading and unloading in just a few minutes. By using a tiltable drawbar, it can be placed vertically on the rear wall. We will take care of all the formalities associated with the purchase for you. The trailer will be delivered to the address you specify within 5 working days together with the registration documents. Once you have received the trailer, you only need to register and insure it to be able to use it in full. Gjdpfet Iv Dlex Afnotu If you decide to buy our new car trailer, you will receive a 2-year warranty so that you can use it without worrying about damage. Each product is sent with a user manual and a warranty booklet. All important documents will be sent to you together with the purchased Garden Trailer 230 KIPP. Furthermore, you always have the option of purchasing additional equipment in the form of a jockey wheel or anti-theft device or additional drop sides. If you have any questions or problems when using the trailer, you can contact our advisors at any time. They will be happy to provide you with all the information you need and explain everything to you. Our car trailer can also be used thanks to its tiltable drawbar. This makes it much easier to load and unload goods that you would normally have to lift or put down. This solution is also most often found in much more expensive trailers, which significantly affects the better feeling of using them. Another advantage of this solution is the ability to hold the trailer vertically with the drawbar folded in and resting on the rear dropside. So you don't have to worry about the trailer taking up a lot of space in the garage or not fitting because of the protruding drawbar. You can even put it on the front of the building or anywhere!

Condition: excellent (used), Year of construction: 2004, T-Die Serial No.: L 1081-041391 // Calender Serial No.: F 1201-041392 Haul-Off Serial No.: F 1201-041392-T Max. winder speed: 50 m/min Type: Film system 1080 mm usable width Equipment / Additional information: Max. gross output PP up to 1000kg/h with film width up to 1200mm A special feature is the winding system, which can cut narrow films (150 mm - 100 mm) or for example 8 x 175 mm or even 2 x 700 mm one nozzle lip with a max. film thickness of 2mm up to 1000kg/h. Total power consumption: 211 kW/h Main engine power: 250 kW Min. 068 mm film thickness in PS / min. 0.75 mm in PP Maximum calender speed: Max. 50 m/min. mechanically possible Consists of: -Dosing system 5-chamber Maguire Gjdpfxsw Tbr He Afnstu -Extruder (160 mm screw) Amut EA 160 // Age: 2003 -Screen changer (for cleaning in food production) -Melt pump -Slot die (1 insert) 120 cm -Lip with max. film thickness up to 2mm up to 1000kg/h -Calender 140 cm -Thickness gauge SBI TMD-EC/140.20.200.R -Post-cooling rollers (4 pcs.) -Winder (Film jam during roll jam) -Cutting machine & film tensioner -Film winders (3 pcs.) -Mill MAZZA CBS 25 40 2T18 // Age 2003 Fully existing infrastructure; control cabinets, pumps, etc.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, screw diameter: 62 mm, Details: co-rotating, degassing, vacuum pump, segmented screws and cylinder, opportunity for side feeder Gedpfx Asxu Db Esfnetu

Year of construction: 2016, condition: as good as new (ex-display), Kategorie / Category: Doppelschneckenextruder / Twin-screw extruder Nummer / Number: DE27621 Hersteller / Manufacturer: KraussMaffei Berstorff Type: ZE 110 R x 28D UTmi Year of manufacture: 2016 like new, less than 100 operating hours Screw diameter / Screw diameter: 2x Ø 127,0 mm L/D: 28:1 (extension of the processing unit possible / extention of processing unit possible) Antrieb / Motor: 250,0 kW (AC) - Wasser gekühl / water cooled Details: co-rotor, screw speed: max. 300 rpm, degassing, 2x Busch vacuum pumps MM 1202 A VA3, segmented screws and barrels, 1 x Berstorff ZSFE 120 side feeder - Control system: Siemens S7 with screen control The offer does not meet your expectations? Please visit our website Plama or send us your detailed inquiry, we have the right product for almost every budget. Gedpfoiux Nmox Afnetu

Year of construction: 1997, condition: excellent (used), functionality: fully functional, Used Reifenhäuser extruder Gedpfew Np Tksx Afnotu Type: RH-241-1-50-30 WE Grooved feeding zone With manual screen changer Fully functional

Year of construction: 1990, condition: excellent (used), functionality: fully functional, Reifenhäuser extruder Type: RH 51-1-35-25 5.6 kW DC motor 103 rpm 500 bar melt pressure sensor Gtjdpfx Afjwxvadensu 3 zone screw 35-25d fully functional

Year of construction: 2023, condition: like new (used), Our compact extruder model EX20-25d Manufacturer: PMH GmbH Screw diameter [mm] 20 Screw length [L/D] 25 Screw speed [min-1] 10-192 Screw nitrided Torque 55Nm Drive Three-phase drive with frequency converter Drive power [kW] 1.1kW Barrel material: nitrided Electrical connection values 3 / N / PE Supply voltage [V] 400V at 50 Hz Control voltage [V] 24V Ceramic heating tapes [W] 1200W Number of heating tapes 3 Max. Output approx. 5kg/h Gtsdpfx Asq R Tkwjfneu Max. Processing temperature [°C] 300

Condition: ready for operation (used), Year of construction: 2012, operating hours: 2 h, functionality: fully functional, machine/vehicle number: 17137, CNC machine with 0 operating hours. The machine is now only EUR 18,500. Gtedpfew H N Nzsx Afneu

Condition: like new (used), Year of construction: 2023, operating hours: 20 h, functionality: fully functional, - Manufacturer: HAMATEC - Model: H22149 - Year of manufacture: 2023 - Single-screw extruder Ø20mm 25LD - Analog controls Gsdpex Hz Uijfx Afnstu - Screw profile: soft PVC - 3 heating zones on the barrel - 2 heating zones on tooling - Melt temperature and pressure sensor - Up to 10 kg/h Showroom machine, used only for testing purposes.

Year of construction: 2019, condition: good (used), The granulation line consists of a belt conveyor, an agglomerator technologically integrated with an extruder; a two-stage, twin-screw extruder with L/D ratios of 28:1 and L/D 12/1 is equipped with a degassing system, a hydraulic screen changer and a water cutting head, a centrifuge, a vibrating feeder with a screen, pneumatic conveyors, a buffer tank, and automatic control with a control cabinet. The line is a reliable recycling equipment that is suitable for plastic films, bags, scraps (≤ 0.5 mm) and other soft PE/PP waste. It has a compact structure, an ergonomic layout of individual devices, and is characterized by smooth operation, convenient maintenance, low noise and energy consumption. The control panel is only for the line, and all the electrical parts for all the equipment in the line are equipped with international high-quality components, including Siemens low-voltage electrical appliances, Fuji inverter, Omron temperature controller, etc., which is a guarantee for the reliable operation of the production line. In addition, the control panel is also equipped with a door protection device. When the door is opened, the power will be cut off and there will be no electricity in the panel. It will make the checking and maintenance much safer, without the risk of electric shock. After closing the door, the power will be on. Feedstock Conditions: Washable PE/PP films or bags The thickness should be ≤ 0.5mm The raw materials should not contain oil, metals and other things. Environmental Conditions of the Line: No freezing point or condensation points; Temperature 0 ~ 40 ℃. Working Conditions: Electricity: 3 phase 380V, 50Hz; Godpfxovlxufe Afnetu Installed Power: ~ 480kW; Required water supply: ~ 10 m3 / h. Year: 2019 Model: PRP-500

Condition: excellent (used), Eccentric granulation EGR is used in the production of temperature- and shear-sensitive plastics. It is specifically designed for granulating soft PVC, rigid PVC, HFFR formulations, or compounds for low-, medium-, and high-voltage cables based on elastomers. Godew Iu T Tspfx Afnotu

Condition: new, functionality: fully functional, Offered for sale is a semi-moist pet treat production equipment set based on a twin-screw extruder, designed for continuous forming, portioning, and cooling of semi-moist products. The line has been dismantled and is ready for shipment. It was purchased from a supplier and not used in production, but the configuration is equivalent to machinery currently operating in active plants for semi-moist pet treat manufacturing. This system addresses the key process steps that define semi-moist product quality and handling: stable solids dosing into the extruder, controlled shaping and cutting, as well as staged cooling to stabilize texture and reduce sticking or deformation before packaging or further processing. The extruder is of twin-screw design and has achieved production capacities of up to 150 kg/h, depending on recipe and configuration. Product shaping is highly flexible and can be adapted to a variety of product formats; it is suitable for dental sticks, hearts, bones, sticks, strips, and other geometries depending on the die/forming set and cutter configuration. The configuration line has been used for high meat meal or grain-free semi-moist treats as well as vegetarian-type items; final product characteristics depend on recipe, moisture targets, and process parameters. Dry base components are supplied using a volumetric or mass-based dosing feeder, feeding directly into the extruder. This enables steady extrusion and consistent shaping. Downstream portioning is performed with a rotary knife cutter fitted with specialized inserts for clean cutting of semi-moist products. Cut length can start from approx. 5 mm and can be adjusted as required; achievable range depends on settings and the cutter head. The cutter head concept is flexible and can be adapted or redesigned depending on desired final product and surface finish for different shapes and recipes. After forming and cutting, product is conveyed through an initial cooling section with a fan, followed by a conveyor cooler for further stabilization. Cooling is based on ambient forced air, with cooling performance managed by conveyor speed (residence time) and airflow. This two-stage cooling process is optimal for semi-moist products, helping to prevent clumping, deformation, or marking during handling and transport. Godpfjycfw Ejx Afnjtu A notable feature of this line is the mixing head at the extruder outlet, which supports improved mixing and temperature control and enables production of two-color treats (application dependent). The sale also includes the liquid handling package used in semi-moist processing—stainless steel pumps and tanks for water, fats/oils, glycerol, and other typical process fluids. All liquid handling components are stainless steel, meeting hygienic production standards.

Year of construction: 1997, operating hours: 58,668 h, condition: good (used), This WEBER extruder is in machine storage at Plastima Used Machinery. The machine is from 1997 and is in great condition. Make: Hans Weber GmbH Model: NE 7 042 Screw type: single screw Year of construction: 1997 Propeller Ø: 75mm Godpfxetpg Dne Afnetu Working hours: 58,668

Condition: good (used), functionality: fully functional, Working from production, has always run with an 800 mm extrusion head for producing HDPE pipes. Gedpfx Afowr Db Nenjtu

Year of construction: 1997, operating hours: 76,200 h, condition: good (used), This WEBER extruder is in machine storage at Plastima Used Machinery. The machine is from 1997 and is in great condition. Make: Hans Weber GmbH Model: NE 7 048 Screw type: single screw Year of construction: 1997 Propeller Ø: 75mm Gtsdpfx Astpg D Uofnju Working hours: 76,200

Year of construction: 1991, operating hours: 32,000 h, condition: refurbished (used), • One pair of original WEBER screws (excellent condition, including measurement report • One pair of non-original screws • Gearbox inspected and partially revised by WEBER • Control upgraded to WPS control • Output on PVC around 700 kg/hour Gtedewaxuaopfx Afnju

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 019, IDE single screw PVC extruder Gtedpfx Asxgh H Asfnou

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 035, Single screw PVC extruder Gjdpjxgh Dzofx Afnetu

Year of construction: 1997, condition: used, functionality: fully functional, machine/vehicle number: DS 70 087, WEBER DS 7.22 Twin Screw Extruder Gtedpfx Afjxghz Heneu

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: 021, IDE PVC single screw extruder Gtjdpfjxghy Nsx Afneu

Condition: used, functionality: fully functional, machine/vehicle number: 036, Year of construction: 1997, IDE single screw extruder for PVC profiles Gjdpfx Asxghxrjfnetu

Year of construction: 2006, condition: refurbished (used), functionality: fully functional, Starlinger Extruder - Screw diameter: 65 mm - Refurbished - Degassing zones - Filter / screen changer - Strand die Data sheet, see photos. Optionally with water bath & strand pelletizer, etc. Gtodpfjhgq Ahex Afneu We are available for any further questions. Commissioning and testing available upon request. In stock

Year of construction: 1993, operating hours: 281 h, condition: used, functionality: unexamined, Extrudex single-screw extruder ED-N45-25D, year 1993, condition used (completely overhauled in 2014) Gtsdjxw Tumjpfx Afneu Type: ED-N-45-25D Rated voltage: 3x400V 50Hz Control voltage: 230V 50Hz / 24VDC max. main fuse 200A Drive motor Year: 2004 Type: EFG EF132 M Optionally included: - Belt haul-off - Calibration table For further information, please inquire. Price on request.

Year of construction: 2016, condition: good (used), functionality: fully functional, Farmet FE500 extruder for soybean, other oilseed, grain, pet food etc, in good condition, complete with command box. Gtodpfxjxfc Uxj Afneu Motor 55kw Capacity 500-750kg/h