Used Extruder Garden for sale (558)

Year of construction: 2000, condition: used, Rotational speed: 227/min, power: 31kW, heating output: 7.8kW, length: 1952mm, width: 840mm, height: 1920mm, weight: 820kg. Gtsdpfx Asduyyzefnsu

Year of construction: 2016, condition: ready for operation (used), Control panel: Siemens SIMATIC HMI, connected load: 80kW, weight: 1.85t, operating hours: approx. 4500h, with Kreyenborg feed hopper, year of manufacture: 2017, and Trendelkamp screen changer. Documentation is complete, on-site inspection is possible. Gtedpsv Uz Awjfx Afneu

Year of construction: 1998, condition: ready for operation (used), A complete PS foam extrusion line (capacity: 350kg-400kg/h) is available. 1) 7x dosing units K-Tron Switzerland and Coperion, main components: 3, side components: 4, capacity: 350kg-400kg/h. 2) Primary extruder Battenfeld, year of manufacture: 1998, screw diameter: 120mm, screen changer: Gneuss, double piston pump: LEWA. Including gas injection. 3) Secondary extruder, screw diameter: 150mm/33D. Including unused old die and a coextruder Kühne with 50mm screw diameter. 4) Oil-heated Sunwell round die. 5) Calibration unit Dorn, knives: 2, films: 2, film width: 1080mm. 6) Take-off unit Gloenco Double S Haul-Off. 7) PS film winder, positions: 4, simultaneously operated positions: 2, winding speed range: 10m-30m/min, roll weight range: 150kg-300kg, roll length range: 500mm-800mm. Including discharge with ionization. Documentation available. An on-site inspection is possible. This line is sold ONLY to customers outside Europe. Gtjdoxq Exqjpfx Afnsu

Year of construction: 1990, condition: ready for operation (used), A total of three extruders including throughput measurements (scales), as-new barrels (2018) and overhauled screws are available. Total extrusion capacity: approx. 100kg/h. 1) DC smoothbore extruder, output: 17kW, machine dimensions X/Y/Z: approx. 2300mm/600mm/1100mm. 2) DC smooth tube extruder, power: 32kW, machine dimensions X/Y/Z: approx. 3000mm/700mm/1200mm. 3) DC grooved barrel extruder, output: 49kW, machine dimensions X/Y/Z: approx. 3000mm/700mm/1200mm. On-site inspection is possible. Gjdpfx Asvw Aqhefnotu

Condition: ready for operation (used), One complete and one partially dismantled extruder system Davis are available. 1) Davis Standard DS-25, power: 6385W, max. melt pressure: 700bar, max. temperature: 315°C. Including 4x screws, 6x bursting discs, Digicolor dryer, platform, screen changer with heating and sealing pack, new cylinder, 3x screw seals, and spare drive motor. 2) Davis Standard DS-20, power: 4500W, max. operating pressure: 700kg/cm², max. temperature: 315°C. Including Conair dryer, 3x screws, screen changer with heating and sealing pack, cast housing, extrusion tool, and spare drive motor. General accessories: various ring heaters, 3x Eurotherm temperature controllers, and 3x Eurotherm pressure sensors. Documentation available. An on-site inspection is possible. Gtodpfx Afsxn S Umsnsu

Year of construction: 1982, condition: ready for operation (used), A twin screw extruder is offered. Drive: ASEA electric motor type ACA 200-6L, 50.5kW, 1460rpm. Inspection possible by prior arrangement. Godpfx Afsx Hifvonetu

Year of construction: 1983, condition: good (used), This WEBER extruder is in machine storage at Plastima Used Machinery. The machine is from 1983 and is in fine condition. - Brand: Hans Weber GmbH - Model: ZE 30 - Year built: 1983 Godeq Tr Tbjpfx Afnjtu - Single-screw extruder - Screw Ø: 30 mm - Ratio: 20 L/D

Year of construction: 1998, operating hours: 64,082 h, condition: good (used), This Cincinnati extruder is in machine storage at Plastima Used Machinery. The machine is from 1999. Special note: the extruder lacks the gearbox. – Brand: Cincinnati – Model: Titan 45R-APC – Construction year: 1998 – Conical double screw extruder Gtsdpfxjq Tr T Ro Afneu – Screw Ø: 45 mm – Working hours: 64.082

Year of construction: 1993, operating hours: 104,599 h, condition: good (used), Brand Cincinnati Milacron Austria GmbH Type CMT 35 Machine number 2005723/10 Type Screw Conical Double Screw Year of manufacturing 1993 Gjdpfx Aevl Hzgjfnstu Machine hours 104,599 hours Screw Diameter 35mm Dimensions (LxWxH) 3200 x 1500 x 1720 mm Weight (approx) 2000kg

Year of construction: 2008, condition: good (used), This extruder line from Kuhne is in machine storage at Plastima Used Machinery. The machine comes from 2008 and is in great condition. Gtjdpfx Afsu Etygoneu Brand: Kuhne GmbH Model: K 60E - 33D Type Screw: single screw Year of construction: 2008 Screw diameter Ø: 600mm L/D ratio: 33 cylinder height: 425 mm Cone height: 325 mm Total height: 750 mm

Condition: excellent (used), Year of construction: 2013, screw diameter: 38 mm, This machine is in storage at Plastima Used Machinery Godjvcqccepfx Afnotu

Condition: new, Year of construction: 2024, power: 10.3 kW (14.00 HP), fuel type: gasoline, Brugger HX10 shredder - Powerful, compact and versatile! The Brugger HX10 shredder is the ideal solution for all gardening professionals and hobby gardeners who are looking for a powerful yet maneuverable shredder. With its powerful 14 hp petrol engine and robust design, the HX10 effortlessly shreds branches and trunks with a diameter of over 10 cm. Whether in private gardens or on larger sites - this shredder brings power to every corner! Thanks to its narrow design, the HX10 is perfect for use in confined areas. The device can be easily adjusted by hand and maneuvered with ease, allowing you to work efficiently even in difficult garden areas. Gtedpfeumv E Hex Afneu With a width of just 80 cm, the HX10 can get through any garden gate. Your advantages at a glance: - Powerful: 14 hp petrol engine for powerful shredding - Effective: Processes branches and trunks up to a diameter of over 10 cm - Compact and maneuverable: Narrow design for easy maneuvering in small spaces - Easily adjustable: Flexibly adjustable for comfortable working - Perfect for horticulture: Ideal for use in private and professional gardens The Brugger HX10 - your all-purpose weapon for efficient garden maintenance! Technical data: Dimensions: 140 x 80 x 165cm (l x w x w) Weight: 185 kg Blades: 2, 30cm wide Max. Diameter: 10cm Processing/h: 4-6m3/h Feed hopper: 51 x 42 cm --- All prices plus VAT. Contact us for a customized offer!

Condition: used, Year of construction: 2006, Kahl Twin Screw Extruder is a machine manufactured by Kahl in 2006. Currently stored in Germany, it comes equipped with a fine grain hopper, fine grain discharge, fine grain sack, a belt unit (Type: BTK 1510-0), water addition, extruder, supply air blower, reconditioned in 2016. It also includes dust removal, tumbler sieve, dedusting, final packaging, belt dryer, product hopper, pipe chain conveyor, cyclone, rotary valve, distributor, dust sack, exhaust air blower, air stream rotation dryer, feed table, mixer, and an additional air supply blower and belt dryer. The delivery terms are FCA. Equipment: 1 x feed table, 1 x tube chain conveyor, 1 x mixer 1 x water addition, 1 x extruder, 1 x supply air fan, 1 x cyclone, 1 x rotary valve, 1 x distributor, 1 x belt dryer, 1 x product hopper, 1 x tube chain conveyor, 1 x fine grain hopper, 1 x fine grain discharge, 1 x fine grain bag, 1 x supply air fan, 1 x belt dryer, 1 x rotary valve, 1 x dust bag, 1 x exhaust fan, 1 x airflow rotary dryer, 1 x dedusting, 1 x tumbling screen, 1 x bar removal, 1 x final packaging Godpfx Asvfxqysfnstu 1 x belt unit, type: BTK 1510-0 refurbished 2016

Year of construction: 2011, condition: ready for operation (used), Screw diameter: 59mm, screw rotational speed: 25-250/min, with complete documentation, control cabinet, screen changer, side dosing unit, granulator and additional accessories. Godpfxehtvmhj Afnetu

Year of construction: 1996, condition: ready for operation (used), Output: 140-180kg/h, screw diameter: 50-103mm, screw length: 1300mm, max. screw rotational speed: 43/min, connected load: 25kW, operational hours counter: 62,590h, including dosing unit with hopper, vacuum pump, cylinder cooling aggregate and screw temperature control. Godpfxshz Dyas Afnotu

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 3.04-00054, Equipment: type plate available, Used Bellaform extruder Type: BH45-30D Year of manufacture: 2013 With screw dimensions 45 mm - 30 l/d, screw speed approx. 160 rpm With 30 kW water-cooled servo motor, with gearbox Cylinder with 4 heating/cooling zones and water bushing in the feed area Material hopper plus a COLORTRONIC dosing screw for masterbatch A melt pressure sensor Control cabinet integrated into the machine frame, with factory-new PLC and With new touch panel for simple and intuitive operation This extruder has been functionally tested! Gtjdpfx Afjuxa Abonsu Dimensions: approx. 195 x 70 x 200 cm (L x W x H with hopper)

Year of construction: 2026, condition: new, We have designed our compact extruder model EX30-28d so that it can be used in all extrusion processes. Gtsdpfx Afeby Rfponou We offer this extruder as co-extruder or laboratory extruder, as well as for the extrusion of welding wire, filament, solid rods, hoses, or for pelletizing with hot die or strand pelletizer. We also realize other machine dimensions, please contact us. Our standard extruder with nitrided screw and barrel covers most polymer raw materials. Optionally, we also offer this extruder with wear-resistant screw and barrel, for example: for PEEK, titanium, ceramics, etc.

Year of construction: 1990, condition: excellent (used), functionality: fully functional, Used Reifenhäuser extruder Type: RH 801-1-90-30 Godpfxow Np S Ts Afnetu with one screw D = 90 mm - 30 L/D equipped with ceramic heaters and cooling air fans DC motor, power 103 kW Year of manufacture: 12/1990 Known plasticizing capacity: 250 kg with PP granulate The plasticizing capacity depends on the material and shape Fully functional

Year of construction: 2026, condition: new, functionality: fully functional, The laboratory extruder model EX20-25d is designed for small-scale material development, small batches, or filament extrusion. It has a plasticising capacity of 5kg/h. Our extruder model is designed with a bimetallic barrel and through-hardened screw, allowing for high-temperature processing (up to 400 degrees). This enables the processing of abrasive raw materials, engineering plastics, PEEK, metal compounds, ceramics, and fibre-reinforced materials. Godpfoiv H Ekjx Afnstu Inspect available machines at our factory in Königswinter. We can also provide machines in other dimensions.

Year of construction: 2014, operating hours: 30,000 h, condition: used, functionality: fully functional, machine/vehicle number: 20526471, Laboratory Twin Screw Extruder – Coperion ZSK 26 Mc18 (40 L/D) with a 26 mm screw diameter Featuring all the characteristics of the ZSK Mc18 series, this extruder is ideal for formulation development and compound sampling, as well as for manufacturing small compound batches of up to approximately 180 kg/h. Compared to the previous model ZSK 26 Mc, the new laboratory extruder enables throughput increases of up to 100%, owing to the torque having been increased to 15 Nm/cm³. The extruder is mobile and space-saving as the control cabinet is integrated into the machine’s base frame. Heating and cooling systems are installed and operational (plug & play). Machine No.: 20526471 Year of manufacture: 2012 Operating hours: approx. 30,000 h Condition: Used, in operation Technical specifications: Extruder type: Twin screw extruder Model: ZSK 26 Mc18 Process length: 40 L/D Drive power: 36.9 kW Power supply: 3 × 400 V (−10 % / +6 %), 50 Hz ±2 % Barrel configuration: E-0-0-S-0-0-1-0-V-0 Output: approx. 150–200 kg/h, depending on formulation, raw material, and required product quality Applications: Highly filled compounds, masterbatch applications Suitable for processing: LLDPE, LDPE, HDPE, PP, PPR, PS, ABS, PET, and biopolymers Scope of delivery Gravimetric feeding system: - K-Tron gravimetric feeders - 1 × pellet feeder - 1 × powder feeder (twin screw design) Side feeding / degassing: - 1 × side feeder ZS-B25 - 1 × vacuum side degassing unit ZS-EG25 Vacuum system: Busch vacuum pump Plastex MI 0120 B 222 CNX6, specifically designed for PET applications. Please note: Vacuum pump is not included. Gjdpfoyhd Dbsx Afnotu Process monitoring: - Melt pressure sensor system - Melt temperature sensor system - PLC integration Pelletizing system (strand pelletizing): - Air dryer unit not included - Strand pelletizer SP50 - Water bath Peripheral equipment: - Bag emptying station for pellets - Conveying system to the feeders Spare parts: - Spare parts included, second screw set.

Condition: used, We offer directly on behalf of the owner : Twin-screw extruder Make : COPERION ( Werner & Pfleiderer ) Gearbox make : P.I.V Type : ZSK 170 W 1920/1750 Year of construction : 2021 / 2002 / 1986 Screw diameter : 172 mm Screw speed : 4,9 - 49 min-1 Max. torque : 17,500 Nm Main engine : 216 kW In the last 3 years, a total of over €420,000 has been invested in new components and factory overhauls (some of which were previously unused) The extruder was in use until Aug / 2023 and has already been dismantled ready for transport. The components are partly redundant and date from the years 1986 - 2021. The scope of delivery consists of : Twin screw degassing Coperion DSE 180 - 1 x year of manufacture 2021 ( 180 t€ ) Main gearbox P.I.V Gsdpfx Aex Nxfksfnotu - 1 x year of manufacture 2002, factory overhauled ( 233 t€ ) in 2021, unused - 1 x year of manufacture 1986, factory overhauled in 2016, used 2021 - 2023 Main engines Siemens, 212kW, 460V - 1 x 2002, factory overhauled ( 8 t€ ) in 2020, unused - 1 x year of manufacture 1986, factory overhauled in 2015, used 2020 - 2023 Barrels - 16 various, new + used, with + without openings Screw shafts - 2 x approx. 4,600 mm Miscellaneous : - Supports - screw tips Sold without electrical and control devices and without screw segments. Further technical data and details on request or see data sheets in photos / PDF

Year of construction: 2004, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 40EV.118, Twin-screw extruder model EBC 40HT/37D Screw diameter: 42mm Main motor power: 51kW L/D: 37 Center distance: 35mm The extruder consists of a machine base, reduction gearbox, and a distribution gearbox equipped with special bearings capable of ensuring perfect operation with a backpressure of up to 150 bar. The barrel is a modular cylindrical type, with a length equivalent to 37 screw diameters, divided into eight sections. Temperature regulation of each barrel module is achieved by forced circulation of demineralized water through a series of horizontally drilled holes in each module. Heating is provided by cartridge heaters. The screws are made up of interchangeable segments and are mounted on splined shafts, allowing for the configuration best suited to the required processing. Barrels and screws are manufactured from highly wear-resistant steel. The degassing system consists of a 1.5kW liquid ring vacuum pump connected to the dedicated module by easy-to-clean piping; extracted gases are condensed in a special container for easy cleaning. The drive system features a (Siemens) 51kW AC motor with an inverter, enclosed in an electrical cabinet equipped with appropriate safety features and control signals. The control panel (integrated into the extruder) is divided into two sections: power, and temperature control. The cabinet is equipped with an air-conditioning unit. The extruder comes with a closed-loop water/water temperature control unit (1.1kW pump). Gtedpfjyg Eghjx Afneu Chiller not included.

Year of construction: 1980, condition: reconditioned (used), machine/vehicle number: 2489, stock-No.:2489 1 used, functionally tested Single-Screw-Extruder, ready for trial-run: Manufacturer: KUHNE Germany Type: ES 60-24 Screw- Ø 60 mm – 24 LD Main-feed zone can be chilled( cooling unit not included ) Screw speed up to 100 r.p.m. Extruder Motor: 25,5 kW – 63 A – DC 4x Heating zones with air-cooling 3x additional heating zones for down-stream equipment as: Gtedpsd Sg Hcsfx Afnju die-head, tools, screen-pack-changer, etc. control board Relating down-stream-equipment as screen-pack-changer, pelletizing etc. against additional price, details upon request. More extruders ex stock available, visit us or ask for our most recent Machine-Stock-List. You´re welcome.

Condition: reconditioned (used), stock-No. 2452 1 used, partly overhauled and functionally tested pelletizing line capacity up to 300 kg/h depending material, equipped with: Kreyenborg Force-feeder SW 100, motor 7,5 kW Extruder BKG single-screw Ø 100 mm – 35 LD, motor 132 kW – AC Screw speed up 143 r.p.m. screw depth 14 mm heating power installed 35 kW 1x athm. venting port with „Stuffer“ * Kreyenborg K-SWE 160 RS screen-pack-changer back-flush self-cleaning with filter surface 244 cm² BKG underwater pelletizing unit AH 300, complete with : diverter-valve , hydraulic unit pelletizer, motor 4 kW incl. die-plate and knife-holder Water pump 2,2 kW Godpei Dtb Uefx Afnstu By-Pass System, Process water tank heating power 9 kW Heat-exchanger BKG pellet spin-dryer TWE 300 with motor 3 kW control-board and operation panel OPTIONAL against additional price ᐳ * Vacuum pump ᐳ pellet classifier sieve, conveying, Big-Bag Station ᐳ chiller – cooling unit More pelletizing lines ex workhop Wuppertal-Germany available, ask for our most recent machine-stock-list or visit us, you´re welcome.

Year of construction: 2004, condition: reconditioned (used), Stock-No. 2054 Gtjdpoiyx Uzofx Afnju 1used, partly overhauled and functionally tested Single-screw extruder AlphaTec A-ES 75.28 Screw –Ø 75 mm- 28 LD main drive 75 kW- AC Screw speed up to 80 r.p.m. - adjustable 1x venting port with vacuum-pump cylinder barrel heating apporx. 30 kW installed 3x addituional temperature controller for down-stream equipment Control board overhauled You´re welcome for inspection visit in our stock Wuppertal-Germany More extruders available