E-CPU-186-B6-1.2

Engel

Condition: ready for operation (used), Year of construction: 2001, operating hours: 98,780 h, clamping force: 2,000 kN, overall weight: 12,200 kg, controller manufacturer: ENGEL, controller model: CC100, This 3-axis Engel ES650H/200W-200HL-2F was manufactured in 2001. It features a clamping force of 2000 kN, a mold opening stroke of 700 mm, and a tie-bar distance of 920 x 750 mm. Equipped with dual injection units, screw diameters of 40 mm and 25 mm, and a rotary table control. Consider the opportunity to buy this Engel ES650H/200W-200HL-2F hydraulic injection moulding machine. Contact us for more information about this machine. • Clamping unit • Mold weight (WZ): 1500 kg • Total moving weight: 3000 kg • Minimum mold height: 550 mm • Mold opening stroke: 700 mm • Tie-bar distance (H × V): 920 × 750 mm • Platen size: 1250 mm • Ejector stroke: 150 mm • Ejector force: 61 kN • Centering ring diameter A-side: 110 mm • Centering ring diameter B-side: 90 mm • Mold locking system: Hydraulic / Pneumatic • Core pull control: Yes • Number of cores: 4 (A-side) • Rotary table control: Yes • Index plate control: Yes • Injection unit 1 (Main) – Type 650H • Max. shot volume: 200 cm³ • Stroke volume: 251 cm³ • Screw diameter: 40 mm • L/D ratio: 20 • Screw speed: 290 rpm • Injection pressure: 1930 bar • Injection rate: 142 g/s • Shot weight (PS): 216 g • Plasticizing rate: 26 g/s • Nozzle orifice: 15 mm • Pump motor: 30 / 12.3 kW • Injection unit 2 (Secondary) – Type 200W • Max. shot volume: 140 cm³ • Stroke volume: 69 cm³ • Screw diameter: 25 mm • L/D ratio: 24 Rsdjyf H Nnepfx Abdjn • Screw speed: 480 rpm • Injection pressure: 2000 bar • Injection rate: 104 g/s • Shot weight (PS): 60 g • Plasticizing rate: 12 g/s • Nozzle orifice: 15 mm • Pump motor: ~6.8 kW • Machine axes travel • X-axis (injection unit): 500 mm • Y-axis (rotary table / mold carrier): 1000 mm • Z-axis (clamping unit): 1400 mm • Equipment and options (machine-integrated) • SPC / Process control: Yes • Pressure interface: Yes • Second injection barrel: Yes • Mold monitoring: No • Cavity pressure sensor: p-θ-t-θ (Priam) • Hot runner control: 16 zones • Filter dryer: No • Special programs: Yes • Special option: GealanXcomp • Automation: No • Condition • Well-maintained and serviced Additional equipment • Engel Linear Take-out Robot ERC 23/1-E (included)

Condition: ready for operation (used), Year of construction: 2000, operating hours: 63,929 h, clamping force: 2,000 kN, controller manufacturer: ENGEL, controller model: CC 200 (CC200), This 3-axis Engel ES650H/200W-200HL-2F was manufactured in 2000. It features a clamping force of 2000 kN, a tie-bar distance of 920 × 750 mm, and a screw diameter of 50 mm. Equipped with dual injection units, hydraulic locking system, and a rotary table control, it ensures precise and efficient operation. If you are looking to get high-quality injection molding capabilities, consider the Engel ES650H/200W-200HL-2F machine we have for sale. Contact us for more information. • Condition: Well-maintained and serviced • Clamping unit: • Mold weight: 1500 kg • Total weight: 3000 kg Rsdpfx Aboyf Htyedsn • Tie-bar distance (H × V): 920 × 750 mm • Platen size: 1150 mm • Opening stroke: 700 mm • Daylight (opening): 700 mm • Min. mold height: 450 mm • Max. mold height: not specified • Ejector stroke: 150 mm • Ejector force: 61 kN • Return force: not specified • Centering diameter (A side): 110 mm • Centering diameter (B side): 90 mm • Locking system: Hydraulic / Pneumatic • No. of cores: 4 • Rotary table control: Yes • Core pull control: Yes • Index plate control: Yes • Injection unit 1 (650H): • Max. shot volume: 200 cm³ • Stroke volume: 392 cm³ • Screw diameter: 50 mm • L/D ratio: 20 • Screw speed: 290 rpm • Injection pressure: 1240 bar • Injection speed: 120 g/s • Plasticizing rate: 41 g/s • Nozzle orifice: 15 mm • Pump installed: 30 / 12.3 kW • Injection unit 2 (200W): • Max. shot volume: 140 cm³ • Stroke volume: 69 cm³ • Screw diameter: 25 mm • L/D ratio: 24 • Screw speed: 480 rpm • Injection pressure: 2000 bar • Injection speed: 60 g/s • Plasticizing rate: 12 g/s • Nozzle orifice: 15 mm • Pump installed: ~6.8 kW • Controls and functions: • SPC (Statistical Process Control): Yes • Pressure interface: Yes • 2nd injection barrel: Yes • Mold monitoring: No • Special programs: Yes Additional equipment • Take-out device (robot): ERC 23/1-E • Travels: X = 500 mm, Z = 1400 mm • Max. mold dimensions (Y-axis): 1000 mm • Hot runner control: 18 zones • WZ sensor system: p–z–t–σ (Kistler) • Additional equipment: GealanXcomp • Automation cell: No • Filter dryer: No

Condition: excellent (used), Year of construction: 2016, Engel duo 1800/500 eco drive Clamping force: 500 t Screw diameter: 70 mm Injection volume: 1139 cm3 Injection pressure: 1735 bar Distance between tie bars V: 830 mm Distance between tie bars H: 910 mm Type: Horizontal Drive: Hydraulic Rodpfx Abew Hbylodon CC300 controll Hours: 38.000 Euromap 67 2 core pullers Ecodrive 2 pumps Quick clamp system

Condition: ready for operation (used), Year of construction: 2004, operating hours: 96,194 h, clamping force: 2,000 kN, screw diameter: 40 mm, injection weight: 216 g, This Engel ES650H/200W-200HL-2F was manufactured in 2004. It features a clamping force of 2000 kN and platen dimensions of 920 x 760 mm. The machine includes a two-component system with screw diameters of 40 mm and 25 mm, and a robot system ERC 23/1-E for enhanced automation. Ideal for precision in hydraulic injection moulding. Contact us for more information about this machine. • Configuration: 2K (two-component injection molding machine) • Clamping unit: Rjdpfx Asyfrb Nobdsn • Platen dimensions (H x V): 920 x 760 mm • Mold installation height (min): 500 mm • Opening stroke: 750 mm • Max. daylight (platen distance): 1150 mm • Max. mold weight: 3000 kg (1500 kg per side) • Ejector stroke: 150 mm • Ejector force: 80 kN • Core pulls: 3 (ejector side) • Centering ring diameter (ejector side): 200 mm • Injection unit 1 (Primary - 650H): • Screw diameter: 40 mm • Injection pressure: 1946 bar • Shot volume (swept): 251 ccm • Shot weight (PS): 216 g • Screw speed: 290 rpm • L/D ratio: 20 • Nozzle radius: 15 mm • Injection unit 2 (Secondary - 200W): • Screw diameter: 25 mm • Injection pressure: 2089 bar • Shot volume (swept): 69 ccm • Shot weight (PS): 60 g • Screw speed: 480 rpm • L/D ratio: 24 • Interfaces/Control: Printer interface; process control available Additional equipment • Robot system: ERC 23/1-E linear robot • X-axis stroke: 500 mm • Y-axis stroke: 1000 mm • Z-axis stroke: 1600 mm • Hot runner control: 16-zone

Condition: excellent (used), Year of construction: 2011, Clamping force: 650 t Screw diameter: 90 mm Distance between tie bars V: 960 mm Distance between tie bars H: 1100 mm Shot volume: 2740 cm3 Type: Horizontal Drive: Hydraulic VIPER 40 Linear robot available Redpfjyfh I Eex Abden The machine has approximately 61,600 operating hours. 6 core pulls on the moving platen, 2 cores and 4 cascade valves on the fixed platen.

Condition: like new (used), Year of construction: 2017, Machine: ENGEL VICTORY 500T / 7050 (Year 2017) Year of manufacture: 2017 Redpfx Abexvingjdjn Control unit: CC300 Operating hours: 565 h Availability: Immediate Clamping Unit: Clamping force: 500 tons Opening stroke: 1100 mm Distance between tie bars: 1500 × 1285 mm Platen size: 1500 × 1285 mm Minimum mould height: 500 mm Maximum daylight (open distance): 1600 mm Injection Unit: Screw diameter: 120 mm Screw length (L/D): 22 D Injection volume: 5430 cm³ Maximum injection pressure: 1600 bar General Data: Motor power: 98 kW Heating power: 30 kW Clamping unit weight: 31 tons Injection unit weight: 15 tons Machine dimensions (L × W × H): 10.50 m × 2.30 m × 2.30 m Options: Core pullers: 3 Robot interface: No Bi-metallic screw/barrel: Yes Other equipment: STAUBLI magnetic platens, 24 hot runner heating zones Note: The machine has very low operating hours (565 h) and belongs to the modern ENGEL Victory tie-bar-less series, ideal for large moulds and high-precision production.

Condition: ready for operation (used), Year of construction: 2012, operating hours: 73,437 h, clamping force: 1,600 kN, screw diameter: 45 mm, total height: 2,095 mm, overall weight: 8,700 kg, product length (max.): 5,155 mm, This Engel VICTORY 650/160 tech was manufactured in 2012. It features a tie-bar-less design, enhancing flexibility and accessibility for various mould sizes, with a clamping force of 1600 kN and a screw diameter of 45 mm. It's equipped with a robot, ensuring efficient automation. If you are looking to get high-quality injection moulding capabilities, consider the Engel VICTORY 650/160 tech machine we have for sale. Contact us for more information about this machine. • Operating hours: 73,437 h • Condition: Excellent • Status: In production • Maximum injection volume: 318 cm³ • Minimum mould height: 292 mm • Maximum mould height: 900 mm • Platen opening stroke: 609 mm • Platen dimensions: 750 × 750 mm • Tie-bar distance: Tie-bar-less design • Motor power: 22 kW • Heater power: 13.35 kW • Number of electrical connection pins: 16 • Injection nozzle radius (tip): R35 • Centering ring diameter: 125 mm • Number of cores: 0 • Number of heating zones: 0 Additional equipment • Equipped with robot: Yes Rsdpfx Aox Nr Hujbden • Robot interface: Euromap 67

Year of construction: 2012, condition: ready for operation (used), screw diameter: 55 mm, This Engel victory 750/160 Spex was manufactured in 2012. It is a hydraulic injection moulding machine featuring core pull, an ejector plate safety device, a 1/2" air valve, and a 10-way water distributor. Consider the opportunity to buy this Engel victory 750/160 Spex hydraulic injection moulding machine. Contact us for more information. • 2 units available • Machine 1: 29,462 hours • Machine 2: 28,713 hours • Core pull Rodpfx Ajx D I Egobdsn • Ejector plate safety device • Air valve 1/2" Additional equipment • 10-way water distributor

Year of construction: 2010, condition: ready for operation (used), screw diameter: 55 mm, This Engel 750/160 Spex was manufactured in 2010. It is a hydraulic injection moulding machine featuring a 55mm screw diameter, core pull, ejector plate safety device, and a 6-way water distributor. If you are looking to get high-quality moulding capabilities, consider the Engel 750/160 Spex machine we have for sale. Contact us for more information. Rsdpfxsx D I Eae Abden • Units available: 2 • Machine 1 hours: 35,066 h • Machine 2 hours: 38,769 h • Core pull • Ejector plate safety device • Air valve 1/2" • Water distributor: 6-way

Condition: ready for operation (used), Year of construction: 2013, clamping force: 800 kN, screw diameter: 25 mm, This Engel Insert 200V/60 rotary was manufactured in 2013. A vertical injection moulding machine, it represents a reliable option for precision moulding tasks. Consider the opportunity to buy this Engel Insert 200V/60 rotary vertical injection moulding machine. Contact us for more information. Rjdpfx Aox D H Awjbden Screw diameter 25 mm.1.) Clamping forceClamping force: 600 kNOpening stroke: 338 mmEjector stroke: 105 mmEjector force: 20.1 kN2.) DrivePump drive power: 15 kW3.) Injection unit 1Screw diameter22 mm25 mm30 mm35 mmMax. swept volume53 cm³69 cm³99 cm³135 cm³Max. screw speed480 rpm (for all diameters)Current screw speed480 rpm (for all diameters)Injection rate80 cm³/s (22 mm)104 cm³/s (25 mm)149 cm³/s (30 mm)203 cm³/s (35 mm)Injection rate increased53 cm³/s (22 mm)68 cm³/s (25 mm)98 cm³/s (30 mm)134 cm³/s (35 mm)Specific injection pressure2221 bar (22 mm)2090 bar (25 mm)1451 bar (30 mm)1066 bar (35 mm)Specific injection pressure increased2402 bar (22 mm)2404 bar (25 mm)2205 bar (30 mm)1620 bar (35 mm)Nozzle stroke530 mmNozzle contact pressure28.3 kN