Used Ema 201 for sale (4,618)

Condition: used, functionality: fully functional, machine/vehicle number: 001654U, load capacity: 6,300 kg, For sale Used Demag single-girder overhead crane, approximately 20,500 mm span x 6,300 kg capacity. Ref. 001654U * Stored indoors * Technically 100% in good condition and inspected All our new and used cranes, which we supply assembled, come with a warranty! We can optionally supply our cranes including: * Adjustment in length and/or height and possible repainting * Power rails / conductor bar system * Radio remote control * Tandem control * Installation and inspection You can also contact Jan Reiling B.V. for: * New lifting equipment * Parts for your lifting equipment * Swivel cranes * KBK X/Y systems * Chain hoists * Wire rope hoists * Service and maintenance * Inspection of your lifting equipment In addition, we have our own stock of approximately 15,000 Demag parts. For more information, please visit the Jan Reiling B.V. website. Cranes, overhead crane, gantry crane, workshop crane, warehouse crane, hoist, crane, hall crane, bridge crane, workshop crane, storage crane, lifting equipment. Overhead crane. Single-girder. Codpfezik Stex Aaxord Chain hoist.

Condition: used, functionality: fully functional, machine/vehicle number: 001652U, load capacity: 6,300 kg, For sale Used Demag single-girder overhead crane, approximately 17,000 mm span x 6,300 kg capacity. Ref. 001652U * Stored indoors * Technically 100% operational and inspected All our new and used cranes, which we supply with installation, come with a warranty! We can optionally supply our cranes including: * Adjustment of length and/or height, and possible repainting * Power rail / conductor bar system * Radio remote control * Tandem control * Installation and inspection Crsdszik Rcjpfx Aaxod You can also contact Jan Reiling B.V. for: * New lifting equipment * Parts for your lifting equipment * Slewing cranes * KBK X/Y systems * Chain hoists * Wire rope hoists * Service and maintenance * Inspection of your lifting equipment In addition, we have our own stock of approximately 15,000 Demag parts. For more information, see the Jan Reiling B.V. website. Cranes, overhead crane, gantry crane, workshop crane, warehouse crane, hoist, cranes, hall cranes, bridge cranes, workshop cranes, storage cranes, lifting equipment. Overhead crane. Single-girder. Chain hoist.

Condition: used, functionality: fully functional, machine/vehicle number: 001649U, load capacity: 6,300 kg, For sale Used Demag single-girder overhead crane, approximately 17,000 mm span x 6,300 kg capacity. Ref. 001649U * Stored in a dry environment * Technically 100% in order and inspected All our new and used cranes that we install are supplied with a warranty! We can optionally supply our cranes including: * Adjustment in length and/or height, and repainting if required * Power rails / conductor bar system * Radio remote control * Tandem control * Installation and inspection Cjdpozik Nxjfx Aaxerd You can also contact Jan Reiling B.V. for: * New lifting equipment * Parts for your lifting equipment * Swing cranes * KBK X/Y systems * Chain hoists * Wire rope hoists * Service and maintenance * Inspection of your lifting equipment In addition, we have our own stock of approximately 15,000 Demag parts. For more information, please visit the website of Jan Reiling B.V. Cranes, crane, gantry crane, workshop crane, warehouse crane, hoist, cranes, hall cranes, bridge cranes, workshop cranes, storage cranes, lifting equipment. Overhead crane. Single-girder. Chain hoist.

Condition: ready for operation (used), Year of construction: 2015, Manufacturer: WEMAS GmbH Type: BZ 500 Year of manufacture: 2015 Control system: FANUC Series 0i-MD Connected load: 22 kVA Operating voltage: 400 V Weight: approx. 8,280 kg Equipment: Pallet changer The machine was primarily used for aluminum processing and is very well suited for this purpose. According to our current knowledge, the machine is generally in operating condition. There is currently a malfunction in the pallet changer, which is likely due to a defective sensor. Therefore, the pallet changer is currently not reliably usable. According to our current knowledge, all other machine functions are operational. Crodpfxozi Hdlo Aaxsd The machine is currently powered on and can be inspected after prior appointment.

Condition: excellent (used), Year of construction: 2018, operating hours: 34,000 h, functionality: fully functional, Great opportunity! Like-new Salvagnini S4 / P4 from the first owner, built in 2018! The machine is in perfect, like-new condition and ready for immediate use! The system has been regularly serviced by Salvagnini, and the machine is covered by a maintenance contract. Technical data and Salvagnini internal number: Punching machine/shear with rotating station S4Xe.30 consisting of: Conveyor belt TAC30.L2000 Corner turning device DA30 Punching machine S4Xe.30 Punch head H3 Oil-dynamic hydraulic unit HU22E Control and management of the SiX system Right-angle shear CS5S Turning device DF Lower cylinder EI09 Embossing unit BU30 Double rotating punch P2R3132 Double rotating punch P2R3334 Threading roll unit ME35 Device for automatic application of self-adhesive labels LBC (label printer) Portal robot MC30 Conveyor with brushes CTS30 Shear lift table TCV3015 Water-air cooling unit R81E Tools (detailed list available on request) P4Xe-3125 Swivel bending machine including roller and turning station consisting of: Shear lift table TCV3015.CT.RPC Feeder-destacker device PCD3015 Turning device RIP3015 Bending center P4Xe-3125 Upper bending die LS Lower bending die LI Programmable clamping device U1 Standard clamping foot NS Control and management of the SiX system Work surface with balls SFE Device for cleaning and lubricating the bending dies PSE Asymmetrical control for auxiliary bending tools for positive bends CLA-A CLA tool set with "swan neck profile" UCE1500G38 Asymmetrical control for auxiliary bending tools for negative bends CLA-N-A CLA tool set with "swan neck profile" for negative bends UCE1500NG38 Codozh I Iispfx Aaxjrd Device for V-notch RSU.UR-4 Swiveling device for auxiliary tools T Option for cutting and dispensing profiles CUT.SPC31 T-tool for 90° bends UTZ2 Delivery device/buffer for panels SAP34.POS The system has a hinged belt conveyor for central disposal of the sheet metal sections. These are then conveyed to tipping containers via a swan neck conveyor. Sorting according to stainless steel, aluminum, and black sheet metal is fully automatic. A weighing and level measuring device is integrated and reports the level via the control system. The machine can be inspected and tested by arrangement. Additional videos and detailed images of the system are available on request!

Condition: used, New spare parts for DEMAG DKUN5 - DKUN 5 (KMK71) Spare parts for the repair of a DEMAG crane, chain hoist Suitable for DEMAG chain hoist DKUN5 Scope of delivery: 1x Shaft-coupling-KMK set 1x Stand set KMK / P = 12600633 1x Runner set KM71 B2 = 12845833 1x Fan set KM71 = 12882233 Cedjzinw Tepfx Aaxord 1x Driving dog KM71 = 12876033 1x Thrust ring set KM71 = 12885233 1x Bearing shield set KMP 71 BS = 12861433 1x Chain guide set LDKUN D5 = 83628033 1x Small parts set KMK 71 B2 = 12878533 Weight 11.5 kg G

Condition: used, Year of construction: 1990, Colour: Blue Empty weight: 100 kg Dimensions (LxW): 120 x 80 cm Price: On request Crsdpfx Aajzfgm Esxsd - Year: 1990 - Documentation available: No - CE certificate present: No - Serial number: 5872695 - Transport weight [kg]: 100kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), Year of construction: 1996, Grinding wheel diameter: 280 mm Grinding wheel width: 30 mm Grinding wheel speed: 2900 rpm Cedezhu Dwepfx Aaxord Electrical connection: 400 V, 0.9 kW Space required: 600 x 270 x 1100 mm

Condition: reconditioned (used), Year of construction: 2021, Gantrycrane 2x35 ton 25 or 28 meter spann longer possible Csdpfxoggggps Aaxsrd

Condition: used, Year of construction: 2003, Gantrycrane 25 ton single hoist now 12,5 ton Crodpjf Dzqyjfx Aaxed

Condition: used, Year of construction: 1998, total length: 3,150 mm, total width: 1,650 mm, total height: 1,800 mm, Colour: Grey Empty weight: 2.500 kg Price: On request - Year: 1998 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 161 - Drive system: Teach-in - Control system brand: Heidenhain Codpfx Aajzd Txrexerd - Control system type: - Power [kW]: 11.0 - Centre height [mm]: 250 - Swing over bed [mm]: 500 - Carriage turning diameter [mm]: 340 - Distance between centres [mm]: 1500 - Bed width [mm]: 315 - Spindle bore [mm]: 80 - Min. spindle speed [rpm]: 20 - Max. spindle speed [rpm]: 2400 - Options: Quick-change tool post, Three-jaw chuck - Transport dimensions: 3150mm x 1650mm x 1800mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2005, Manufacturer: Hazemag Type: AP-KH 1006 Rotor Dia. x W: 1.000 x 670mm. Inlet size: 690 x 350mm Crjdpfxowu Urdo Aaxod Included: – 55 KW E.motor – Control-cabinet – Hydraulic unit – Frame New Spare-parts in stock. See PDF-file below for more detailed information.

Condition: good (used), Manufacturer: Takraf / Zemag Crodspxn D Ijpfx Aaxjd Type: ZWB 630 x 800 -1 Roll Dia.: 630mm Roll Width: 800mm Included frame and electrical motors.

Condition: ready for operation (used), Year of construction: 1999, clamping force: 1,500 kN, screw diameter: 45 mm, injection weight: 320 g, This 3-axis DEMAG ERGOTECH 1500-840 was manufactured in 1999. It features a clamping force of 1500 kN and a screw diameter of 45 mm, making it suitable for processing various materials such as PA, PP, PE, and ABS. The machine has a maximum pressure of 190 bar and a stroke volume of 358 cm³. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG ERGOTECH 1500-840 hydraulic injection moulding machine we have for sale. Contact us for further details. • Stroke volume: 358 cm³ Credpfxoyyyn Ue Aaxod • Materials processed: PA, PP, PE, ABS, etc. • Cylinder temperature: up to 450 °C • Max pressure: 190 bar • Max flow (Qmax): 114 l/min • Power supply: 3x400 V • Frequency: 50 Hz • Total connected load: 78.3 A • Motor load: 41.0 A • Heating load: 37.3 A • Pump load: 41.0 A • Machine weight: 7.7 t • Availability: Mid 2026 Additional equipment • Handling system: Wittmann linear robot • Wittmann W621 (1999) • X-stroke: 550 mm • Y-stroke: 1200 mm • Z-stroke: 2000 mm • Weight: 300 kg

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Fe-Ma-Tech Bag Melter Glue Application Unit: - Type: advanced PUR 2 kg light eSmart - Year of manufacture: 2022 - TOP condition - Weight: approx. 70 kg - Dimensions: 550 x 430 x 970 mm - Type of glue pump: Gear pump - Pump nominal speed: 93 rpm - Base tank size (reservoir): approx. 1 liter - Melting capacity: up to 2 kg/h - Temperature sensor: PT100 device and external heating / optional Ni. 120 - Control accuracy: +/- 1°C The PUR 2 kg light eSmart bag melter is suitable for edge banding machines with lower adhesive consumption. Tank size is compatible with all standard PUR bag packages in sizes of 2-3 kg. Modular system: All components can be replaced individually. Simply remove the sheet metal cover to quickly access all relevant parts. Melting capacity up to 2 kg/h (depending on the adhesive and its viscosity). The solid PUR adhesive, wrapped in aluminum foil, is placed into the tank. The adhesive is gently melted as needed. A glue reservoir is located beneath the tank, holding up to 0.7 kg of liquid adhesive. From there, the adhesive is conveyed via a gear pump, through a FE-MA-TECH® hot-melt hose and heated application head (valve) into the application units (IMA, Homag, etc.). The system is completely airtight, allowing the adhesive to remain in the unit for several months when used properly. Cedpfow I S Easx Aaxord Shipping via freight forwarding is available for an additional €190.40 #8404

Condition: used, Year of construction: 2016, Used machine Year of manufacture: 2016 Condition: Currently still in production Equipment and technical data: Glue pot Pressure zone Cut-off saw Combination milling (radius 2 mm), flush trimming Workpiece thickness: 8 - 50 mm Minimum workpiece width: approx. 75 mm Minimum workpiece length: approx. 120 mm Edge thickness: 0.4 - 3.0/5.0 mm Maximum edge height = workpiece height + 4 mm (2+2) Electrical connection: 400V, 50 Hz, 3-phase Total connected load: 3.2 kW Feed speed: 8.0 m/min Pneumatic connection: 6 bar Net weight: 550 kg Credpfxeynpc Ne Aaxed Optional retrofits for the machine: Radius scraper Flat scraper Buffing unit Location: NRW Availability: Approx. December 2025

Condition: new, Year of construction: 2021, Exhibition machine Cedpfxskwhapo Aaxerd Year of manufacture: 2021 (Table machine) For stationary profiling of head edges on soft-forming and post-forming workpieces. Also for edge trimming on thick PVC edges with right-angled workpieces and multi-sided gluing. The processing of symmetrical and asymmetrical soft-forming and post-forming profiles is possible after manual profile depth adjustment. The motor feed is performed manually by sensing the workpiece. Basic equipment: - Workpiece stop system - Pneumatic clamping cylinder - 1 milling motor, 0.8 kW, steplessly adjustable up to 27,000 rpm, standardly equipped with radius cutter R=2. Sensing is performed by a guide ring on the workpiece. - Aggregate guidance on precision linear guides. Technical data: Workpiece thickness: max. 55 mm Workpiece width: min. 80 mm Workpiece length: min. 110 mm Soft-forming profile depth: max. 50 mm Edge thickness: max. 4 mm (depending on the edge material) Milling tool: Radius cutter R 2 Electrical connection: 230V / 50Hz / 1 phase Total connection: 0.8 kW Pneumatic connection: 6 bar Space requirement: approx. 740 x 460 x 500 mm Net weight: approx. 45 kg Availability: short-term Location: Solingen

Condition: like new (used), Year of construction: 2022, operating hours: 52 h, Manufacturer: Vemag Model: Robby Year: 2022 Condition: Used Serial Number: 1390303 Stock Number: 3332 Pump capacity: max 2300 kg/hr Hopper: 105 litre Vacuum pump: Busch 16 m³/h Power: 3 x 400V, 50Hz, 5kW Dimensions: 900 x 1200 x 1950 mm Weight: 425 kg Filling, portioning and linking Including 859 linker and DHV937 casing holder Csdpezdd D Hofx Aaxjrd Only 52 running hours!

Condition: used, Year of construction: 2011, Dimensions: Lifter 1 2.010 x 2.050 x 2.074 mm Dead weights: Lifter 1 1.225 kg weight max. in kg 2.000 kg Effective stroke 1.040 mm Codpfxszhpatj Aaxjrd In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and work-holding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: used, Year of construction: 2013, turning diameter 360 mm Csdjzfqi Repfx Aaxord turning length 1000 mm swing diameter over bed slide 215 mm reus 30 - 3000 U/min spindle bore 38 mm feed längs 0,043 - 0,653 m/min total power requirement 3,5 kW weight of the machine ca. 1500 kg dimensions of the machine ca. 1900 x 900 x 1300 mm

Condition: excellent (used), Year of construction: 2002, High-quality copy lathe, woodturning lathe with milling unit, PLC-controlled. A video of the machine in operation can be sent upon request. PLC-controlled wood copy lathe for turning and milling. The machine has two controlled axes: the longitudinal axis and the rotary axis. Input of various feed rates and corresponding lengths during turning, as well as additional divisions and pitches during milling. Multiple programs for turning and milling operations can be stored. Hydraulic copy sensing of a pattern or template. The roughing and copy tools are equipped with fine adjustments. Template adjustment adjustable from the front and rear via fine-threaded spindles. The copy length can be divided into up to 6 sections with different feed rates for turning heavily profiled workpieces. Drive motor 400V / 3kW with electric motor brake. Two speed stages adjustable via belt drive; within the stages, operation can be continuously adjusted via a frequency inverter. Speed stage 1: 200 - 2000 rpm Speed stage 2: 350 - 3400 rpm Distance between centers approx. 1550 mm Cjdpfx Aaezfwm Noxjrd Copy length with steady rest approx. 1350 mm Bed length approx. 2100 mm Feed rate continuously adjustable, rapid traverse with safety end stop Hydraulic copy slide with V-turning tool Spindle with M33 thread and MK3 internal taper Tailstock MK3 and with quick-release mechanism Extensive accessories: Ring steady rest with front turning tool and insert aid Four-jaw steady rest Four-jaw chuck 125 mm Copy tools, center punches, hexagonal drive dogs, etc. Milling unit with 3kW motor for mounting on the copy slide 5 milling heads available; only the 16 mm collet is missing. CE marking Operating manual V-belt new Original paint, only a few spots touched up. Very good condition, from a small carpentry workshop. The machine was obviously not used to produce large quantities. Dimensions approx. 2600 x 1300 x 1300 mm (L x W x H). Weight approx. 800 kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are in our warehouse; see "other offers from this provider".

Condition: ready for operation (used), Year of construction: 2009, travel distance X-axis: 530 mm, travel distance Z-axis: 750 mm, spindle motor power: 38,000 W, spindle speed (max.): 5,000 rpm, number of slots in tool magazine: 22, number of axes: 4, This 4-axis EMAG VTC 250 vertical turning machine was manufactured in 2009. It features a maximum workpiece diameter of 140 mm and a workpiece length of 630 mm. The machine is equipped with a chuck diameter of 250 mm and a maximum spindle speed of 5,000 rpm. If you are looking to get high-quality turning capabilities, consider the EMAG VTC 250 machine we have for sale. Contact us for further details. - Workpiece Diameter Max: 140 mm- Workpiece Length Max: 630 mm- Chuck Diameter: 250 mm- Main Spindle Speed Max: 5,000 rpm- Main Spindle Power (40% ED): 38 kW- Main Spindle Torque (40% ED): 450 Nm- Rapid Traverse Rate X / Z: 30 / 40 m/min- Tool Taper: VDI 40- Number of Turrets: 2- Total Tool Stations: 2 x 11 (22 stations total, all live capable)- Integrated Automation: Self-loading pick-up spindle design with workpiece storage tracks- the technical specifications may vary slightly Technical Specification Driven Tools Yes Codpfx Aajzhbluoxord

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 332 mm, travel distance Z-axis: 625 mm, number of axes: 4, This 4-axis EMAG VTC 100 vertical turning machine was manufactured in 2014. It features dual-turret machining with 2 tool stations, live tooling, and an enclosed working area. The machine is designed for high-volume production and is suitable for shaft machining. If you are looking to get high-quality turning capabilities, consider the EMAG VTC 100 machine we have for sale. Contact us for further details. • 4x units • CNC Control: Siemens SINUMERIK • Turrets: 2 Credjzhbiaspfx Aaxjd • Live Tooling: Yes • Enclosed Working Area • Hydraulic Chuck • Automatic Workpiece Handling • Dual-Turret Machining • Suitable for Shaft Machining • Suitable for High-Volume ProductionThe technical specifications may vary slightly as these are custom made machines Technical Specification Driven Tools Yes

Condition: used, Year of construction: 2013, grinding diameter 300 mm grinding depth 300 mm Travel distance - Z1 470 mm Travel distance - X1 200 mm Tilt angle - B2 1/1000 ° Crodpfx Aaezfqiwoxed power capacity 3,5 kW Travel distance - Z2 470 mm Travel distance - X2 325 mm Drive power – External grinding spindles 16,5 kW 120 mm grinding diameter - cylindrical 400 mm sanding belt length 400 mm grinding wheel size Ø 500 x 50 x Ø 127 mm Travel distance - U 470 mm Tilt angle – B1 with longitudinal adjustment -1/+12 ° Tilt angle - B1 with workpiece spindle unit -20/+30 ° Manual longitudinal adjustment of the workpiece sp 470 mm Drive power – workpiece spindle 3,8 kW turning speeds 1-895 U/min Load capacity - Spindle head 200 kg Centre height above the swing bridge 200 mm total power requirement 47 kW weight of the machine ca. 10 t dimensions of the machine ca. 3,54 x 2,83 x 2,3 m Accessories / Equipment: - Pneumatic dressing wheel that extends into the working area (mounted behind the workpiece spindle) - Coolant system with paper belt filter - Central lubrication - Spindle cooling - Documentation

Condition: ready for operation (used), Year of construction: 2011, operating hours: 38,546 h, travel distance X-axis: 745 mm, travel distance Z-axis: 300 mm, spindle motor power: 18,000 W, spindle speed (max.): 4,500 rpm, total height: 3,200 mm, total width: 1,500 mm, overall weight: 7,000 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 840Dsl with integrated PLC S7-300, positioning accuracy: 0.001 mm, product length (max.): 3,900 mm, number of slots in tool magazine: 12, number of axes: 2, This EMAG VSC 250 vertical turning machine was manufactured in 2011. It features a Siemens SINUMERIK 840Dsl control system, a robust hydraulic 6-jaw chuck, and a flange turret with 12 tool positions. With a spindle speed up to 4500 rpm and a main spindle drive power of 18kW, it's ideal for precise, efficient operations. For more information about this vertical turning machine, please reach out to us. Additional equipment, optional • Hydraulic 6-jaw special chuck from EMAG with face clamping device and central lubrication • 15-inch TFT monitor • V24 interface Machine Benefits Qualitative Machine Benefits • Machine from single-shift operation • Maximum room temperature: up to 30°c • Maximum humidity: 50% • Sound pressure level: 78 db(a) • 2nd unit with yom 2014 available Technical Machine Benefits • Spindle torque: 300 nm • Vdi shaft diameter: 40 mm • Maximum speed of driven tools: 6000 rpm • Maximum torque of driven tools: 40 nm / 8. 5 kw • Coolant system standard delivery pressure: 7 bar maximum delivery pressure: 7 bar internal coolant supply pressure range: 7 bar (non-adjustable) coolant tank capacity: 360 liters • Chuck model: 6agf 260 k6 k14 • Chuck diameter: 260 mm • Chuck weight: 57 kg • Maximum clamping force for internal clamping (50 bar): 12. 8 kn • Maximum clamping force for external clamping (50 bar): 4. 2 kn Extra Information Machine still under power Technical Specification Driven Tools Yes Dimensions Machine Depth 3900 mm Credpfx Aozg I Dhoaxod