Used Emco Mc 90 for sale (135)

Condition: reconditioned (used), Year of construction: 2006, HT 690 MC PowerMill Multi-axis CNC turning / milling center with automatic tool change, Y-axis and B-axis for complete machining of turned and milled parts; Max. Diameter approx. Over bed 700 mm Max. Turning diameter approx. 520 mm Distance between the spindles approx. 1500 mm Bsdpfx Aehlvgiec Tswt Travels X-axis 490 mm Z-axis 1055 mm Y-axis 200 mm (+/- 100 mm) Drive power: Main spindle 54 kW (S6) Counter spindle 25 kW (S6) Speed range: Main spindle 0 - 3200 min-1 Counter spindle 0 - 3200 min-1 Main spindle: A2-8 (ASA 8 ") DIN 55026, Counter spindle: A2-8 (ASA 8 ") DIN 55026, Y-axis: travel range +/- 100mm PowerMill: A motorized milling spindle with 48-fold tool magazine is integrated into the upper slide system for machining inclined surfaces and bores. The swivel range of 210 ° can be steplessly traversed and interpolated. Preloaded roller guides in all linear axes; digital drive system, integrated spindle encoder; State-of-the-art control technology SINUMERIK 840D Contains: • Main spindle with clamping cylinder • Counter spindle (with clamping cylinder) • Milling spindle with Y and B axes • C-axis for main spindle and counter spindle • TRANSMIT software for simple C-axis programming • Kelvin cooling unit for headstocks, storage of main and counter spindle and milling spindle • Sinumerik 840D, electronic handwheel, RS 232 interface • Chip conveyor with an ejection height of 1100mm programmable (type hinge belt) • Coolant device integrated in the chip conveyor, HP pump with 14 bar • Feed rinsing device for both spindles • Control cabinet air conditioner • Programmable clamping pressure on main and counter spindle • Line filter • Hydraulic power pack • Machine light • Foot switch for chuck main and counter spindle • Documentation • Special accessories: • Automatic door • 48-fold tool magazine • Foot switch main and counter spindle

Year of construction: 2013, condition: ready for operation (used), A CNC 3-axis milling machine Emco is available. Travel X/Y/Z: 900mm/500mm/500mm, table dimensions X/Y: 1000mm/520mm, max. table load: 800kg, speed: 10000rpm, spindle power: 11kW, tool holder: SK40, rapid traverse: 24m/min. Machine dimensions X/Y/Z: approx. 2600mm/2450mm/2950mm, weight: approx. 4800kg, control: Siemens Sinumerik 828D. Documentation available. An on-site inspection is possible. Bedpoy H I Hxjfx Ac Tewt

Condition: good (used), Year of construction: 2005, EMCOMILL FB 6 (with digital scales X, Y, Z) Bjdpfxezln R Ej Ac Tswt Tool milling machine with 18 spindle speeds from 63-3150 rpm, 18 feeds in the X, Y, Z axes, toolmaker accuracy according to DIN 8615, slide travels X/Y/Z 700/500/500 mm, power 5.5 kW (100% duty cycle), hydraulic tool clamping, tool holder DIN 69871 SK 40, electrical connection 400/50/3, incl. Heidenhain scales in X/Y/Z, machine complies with CE, without counter support, with work area protection Manufactured according to ISO 9001: 1994 Year of manufacture 2005 F4UT3901

Condition: excellent (used), EMCO Model E 900 Control type SIEMENS SINUMERIK 810 D Table dimensions 1000 x 520 mm Linear guides ✓ Travel X-axis 900 mm Y-axis travel 500 mm Travel Z-axis 500 mm Axes 3 Spindle speed 12,000 rpm Spindle mounting ISO 40 - DIN 69871 Tool magazine 20 places Coolant supply through the spindle ✓ Spindle motor power 13 kw Year 2017 CE machine Bwjdpfx Acspgng Hj Tet ✓ Overall dimensions 2570 x 2445 x H 2920 mm

Condition: ready for operation (used), Year of construction: 1999, operating hours: 46,644 h, spindle speed (max.): 5,000 rpm, travel distance X-axis: 210 mm, travel distance Z-axis: 610 mm, spindle motor power: 18,000 W, total height: 1,872 mm, total width: 1,910 mm, overall weight: 4,000 kg, controller manufacturer: SIEMENS, controller model: 810D CCU2, product length (max.): 3,000 mm, number of slots in tool magazine: 12, number of axes: 3, Horizontal turning machine manufactured in 1999. This EMCO EmcoTurn 365 MC features a maximum turning diameter of 310 mm and a turning length of up to 610 mm. It includes a powerful main spindle speed range of up to 5000 rpm and a tool holder with 12 powered stations. If you are looking to get high-quality turning capabilities, consider the EMCO EmcoTurn 365 MC machine we have for sale. Contact us for further details. - Working Hours: 46644 h- Max. turning diameter: 310 mm (overall diameter over bed up to 600 mm)- Max. turning length / workpiece length: 520 mm to 610 mm- Max. bar capacity: 45 mm- Main Spindle Speed Range: up to 4200–5000 rpm- Spindle Nose: A6- Spindle Bore: 65 mm- Voltage / Frequency: 400V~ 3/PE 50/60Hz- Maximum Current (Imax): 59 A- Machine Current (IM): 27 A- Short Circuit Current (IK): 6 kA- Number of Tool Stations: 12 stations (all powered)- Speed of Driven Tools: up to 5000 rpm- Power of Driven Tools: approx. 5 kW- Control Unit: Siemens- Included Accessories / Equipment: Kupa Bar Feeder, Knoll Coolant Tank / Filter System (Type 240 S-1, Year 2015), 2 pcs. Chucks, Reduction Tubes / Sleeves, Manuals Bodpfx Acszvptvj Tjwt Technical Specification Counter Spindle Yes Driven Tools Yes Taper Size VDI 30

Condition: used, Year of construction: 2011, 5 machines for sale only as a PACKAGE: 1. CNC turning center, 3 units Manufacturer: Traub Type: TNL 26 Year of manufacture: 2011 / 2008 / 2006 Operating hours: 64,154 / 75,849 / 81,823 Control: Mitsubishi TX 8i Equipment: Bsdpfxozxhxvj Ac Tjwt - Main spindle - Counter spindle - Upper turret - driven + Y-axis - Lower turret - driven + Y-axis - Front tool holder - driven + Y-axis - Rear tool holder - Bar feeder 2x FMB / 1x Breuning The machines come from an ongoing production process. 2. CNC lathe, 2 units, one defective Manufacturer: EMCO Type: Turn 332 MC Year of manufacture: 2010 / 2008 Operating hours: unknown Control: Siemens Sinumerik 840D Equipment: - Main spindle - Counter spindle - Upper turret - Lower turret - Bar feeder TOP ETL 8-45 One machine comes from an ongoing production process; the other was previously used as a source of spare parts, and several components have been removed. The sale is without clamping devices and tools. Dismantling and loading can be organized by a specialist company for an additional charge.

Condition: excellent (used), Year of construction: 2007, operating hours: 3,500 h, functionality: fully functional, turning length: 520 mm, turning diameter: 310 mm, travel distance X-axis: 210 mm, travel distance Z-axis: 610 mm, Equipment: documentation/manual, Available: End of October/Beginning of November CNC turning and milling center EMCO EMCOTURN 365 MC Operating hours: Machine on: 17,842 h Automatic operation: 8,374 h Net cutting time (production): Only 3,369 h! Manufacturer: EMCO Model: EMCOTURN 365 MC Year of manufacture: 2007 Control system: SIEMENS SINUMERIK 810D powerline Bsdozwx Hnspfx Ac Tswt Work area & travels: Travel distances: X = 210 mm | Z = 610 mm | C = 360° (0.001° resolution) Max. turning length (part length): 520 mm Max. turning diameter: ø 310 mm (turning across the bed: ø 600 mm) Max. bar diameter: ø 65 mm Spindle & tools: Main spindle: 60 – 4,200 min⁻¹ | 15/18 kW | 192 Nm | Spindle connection KK 6 Tool turret: 12-position VDI 30 axial turret Driven tools: Yes, on all 12 stations (milling/drilling) Accessories & peripherals: Automation: EMCO COMPACT LOAD E65 short bar loader Tailstock: Hydraulically actuated (500 mm travel, MK4) Chip conveyor Extras: Tool setting probe in the work area Package: Large set of chucks/collets and many VDI 30 holders (fixed and driven) - WITHOUT CABINET

Condition: excellent (used), Year of construction: 2007, turning length: 744 mm, turning diameter: 430 mm, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, Control: CNC path control with 10.4" TFT color display Siemens Sinumerik 840 D powerline TECHNICAL DATA Turning diameter *over bed 600 mm *over cross slide 500 mm Distance between main spindle and counter spindle 975 mm Maximum turning diameter 430 mm Maximum turning length 744 mm Maximum bar diameter 65 mm Workpiece size with counter spindle max. ø 200 x 200 mm Main spindle Drive power 29 kW Speed range 0 – 5000 rpm Maximum bar passage 65 mm Maximum chuck size 200 mm C-axis *Resolution 0.001° Counter spindle Drive power (100/40% ED) 17/22 kW Speed range 0 – 5000 rpm Maximum chuck size 200 mm Travel (Z-axis) 750 mm C-axis*Resolution 0.001° Upper tool holder Disc turret with direction logic Number of stations 12 of which driven 12 Tool holder DIN 69880 VDI 30 Drive power 6.7 kW Speed range 0- 4000 rpm Travel *X-axis 270 mm *Z-axis 750 mm *Y-axis + 50 mm Lower tool holder Disc turret with direction logic Number of stations 12 of which driven 12 Tool holder DIN 69880 VDI 30 Drive power 6.7 kW Speed range 0- 4000 rpm Travel *X-axis 205 mm *Z-axis 750 mm EQUIPMENT/ACCESSORIES  Full enclosure with electrical interlock and sliding doors and machine light  Bar loader magazine IEMCA TAL/Auto 65/32 for bar length 3000 mm including: -Guide channel -Centering device -Axial displacement  Thermal compensation systems for the integrated spindle motors (liquid-cooled)  Hydraulic cylinder with draw tube for main spindle  Hydraulic cylinder with draw rod for counter spindle  C-axes for main and counter spindle  Transmit software for easy C-axis programming  Y-axis in the upper turret (cutting force distribution on 2 axes, resulting in extremely high rigidity)  Drive unit in the upper and lower turret  Part ejector and flushing through the counter spindle  Part removal device for the finished parts Finished part max. ø 65 x 200 mm Finished part weight max. 4.5 kg  Conveyor belt for removing the finished parts from the machine  Turret steady rest including VDI 30 base mounted above the coolant supply (14 bar) centrally in the tool turret Diameter range 10 – 70 mm  Coolant system with 2 high-pressure pumps at 14 bar each and 2 flushing pumps at 3.7 bar each  Cleaning gun for cleaning the clamping devices, covers and the entire working area with coolant  Chip conveyor (hinge belt) in extended form for portal design, suitable for: -long steel chips -chip clusters -fibrous chips -dry and wet machining  Electronic oil mist separator 800 – 1000 m³/h Bwedpfx Aeyx U Hijc Tst  Automatic central oil lubrication for guideways and ball screws  Grease lubrication for main and counter spindle  HAINBUCH collet chuck size 65 for main spindle, without stop (without collets)  Serial interface  Mounting elements  Documentation

Condition: ready for operation (used), Year of construction: 2008, operating hours: 10,459 h, travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: FANUC, controller model: 18i, number of axes: 4, This 4-axis EMCO MC 120-60 vertical machining centre was manufactured in 2008. It features an X-axis travel of 1200 mm, Y-axis travel of 600 mm, and Z-axis travel of 500 mm. The machine is equipped with a Fanuc 18i control unit and a tool magazine with 30 stations. It includes a Lang Eco Compact clamping system. If you are looking to get high-quality machining capabilities, consider the EMCO MC 120-60 machine we have for sale. Contact us for further details. • Quantity: 2 machines (offered together) • 4th axis: Yes, mounted • Tool magazine: 30 stations • Automation: Lang Eco Compact 10 (2011) (fully functional) Additional equipment, not included Bjdoyxnmvepfx Ac Towt • Chip conveyor • Band filter • Tool holder package SK40 • 10 vices • Custom-made wooden floor grating for ergonomic loading Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, For sale: Well-maintained EMCO Hyperturn 665 MC Plus with IEMCA Master 880MP-E bar loader, chip conveyor, and high-pressure coolant pumps! Machine was exclusively used for machining brass parts! CNC Turning and Milling Center | EMCO Hyperturn 665 MC Plus with main and sub-spindle, C and Y axes, dual turrets each with 12 driven tool stations! Technical Data: Swing diameter over bed: 600 mm Swing diameter over cross slide: 500 mm Control: Siemens Sinumerik 840D Max. turning diameter: 430 mm Max. turning length: 744 mm Max. bar capacity: 65 mm Travel - X: 270 mm Travel - Z: 750 mm Bwedpfx Acexzq Ncs Tot Travel - X2: 205 mm Travel - Z2: 750 mm Travel - Y: 100 (+/- 50) mm Main spindle speed: 0 - 5,000 rpm Sub-spindle speed: 0 - 7,000 rpm Tool turret: 2x 12 positions, all driven! Tool holder: VDI 30 Upper turret: X, Z, Y axes Lower turret: X, Z axes Sub-spindle traverse (left/right): Z3 axis C11 spindle: 65 mm diameter (hollow chuck cylinder) C12 spindle: 45 mm diameter (solid chuck cylinder) with part ejector Tool turret type: Sauter 2x 14 bar high-pressure pumps Accessories: Complete tooling cabinet with driven and static toolholders as well as carbide inserts and tool holders Collet chucks for main and sub-spindle Full documentation etc. Machine available immediately! Ready for operation! Loading will be handled by us! Transport can be organized upon request!

Condition: ready for operation (used), Year of construction: 2005, spindle speed (max.): 5,000 rpm, bar diameter (max.): 26 mm, total width: 2,200 mm, total height: 2,200 mm, travel distance X-axis: 78 mm, travel distance Y-axis: 210 mm, overall weight: 2,900 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D with EMCO specials, number of axes: 4, This EMCO Turn 420 MC Plus was manufactured in 2005. It features a maximum turning diameter of 100 mm and a maximum part length of 600 mm. The machine is equipped with a powerful spindle speed range of 0–5000 rpm and a tool changer with 24 stations. If you are looking to get high-quality turning capabilities, consider the EMCO Turn 420 MC Plus multi-spindle turning machine we have for sale. Contact us for further details. • Condition: Very good; connected and ready for testing • Tech specs: • Swing above slide: 160 mm • Main spindle to counter-spindle: 408 mm • Max. turning diameter: 100 mm • Max. part length: 600 mm • Max. bar-stock diameter: 26 mm • Travel: • X/Z: 78 mm • Main spindle: • Max. torque: 38 Nm • Spindle adapter: 70 h5 • Spindle bearing (front ID): 60 mm • Spindle bore: 38 mm • Counter-spindle: • Speed range: 0–5000 rpm • Torque: 38 Nm • Spindle adapter: 70 h5 • Spindle bearing (ID): 60 mm • Clamp length (Ø26 mm): approx. 100 mm • Travel (Z2): 233 mm • C-axis: • Resolution: 0.001° • Rapid traverse: 1000 rpm • Positioning: 3° • Drive power: • Power: 9 kW • Tool changer: Bwsdpfx Aey E Sp Usc Tst • Tool stations: 2 × 12 • VDI shaft: VDI 16 • Tool size (square): 16 × 16 mm • Boring bar diameter: 25 mm • Indexing time: 0.4 sec • Driven tools: • Speed range: 0–5000 rpm • Max. torque: 3 Nm • Max. power: 1.6 kW • Number of tools: 2 × 4 • Feed drives: • Rapid traverse X/Z; X1/Z1: 12/20 m/min • Feed force X: 3000 N • Feed force Z: 3000 N • Acceleration time: 0.1 sec • Coolant system: • Tank capacity: 200 L • Pump power: 0.57 kW • Power consumption: • Connected load: 15 kVA • Supply pressure: 6 bar • Supply rate: 300 L/h • Dimensions: • Center height (top/bottom): 1179 / 1030 mm • Footprint (W × D): 2200 × 1386 mm Additional equipment • Set of accessories and tool holders included Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2008, operating hours: 9,848 h, travel distance X-axis: 750 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 640 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 12,000 rpm, number of axes: 5, This 5-axis EMCO MC 75-50 was manufactured in 2008. It features an X-axis travel of 750 mm and Y-axis travel of 500 mm, providing versatile machining capabilities. The machine is equipped with a Heidenhain iTNC 530 control and a spindle speed of 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the EMCO MC 75-50 vertical machining centre we have for sale. Contact us for further details. • Axes: 4 (standard) + optional 5th axis • Spindle: Kessler • Operating hours: Control ON 36,839 h; Machine ON 21,370 h; Program run 11,122 h; Spindle ON 9,848 h • Electrical: 400 V, 3 phases, 50 Hz, nominal current 50 A, largest load current 30 A, breaking capacity 16 kA • Protection grade: IP54 • Electrical cabinet weight: 220 kg • Cooling: Coolant system with belt filter (MicroMag filtration unit visible) Additional equipment • Chip conveyor • Wired electronic handwheel • Lehmann rotary axis with rocker and counter bearing • Zeroclamp zero-point clamping system • Retrofitted electrical cabinet cooling unit (Rittal) • Nikken rotary table Bjdpsywyq Djfx Ac Towt Technical Specification Taper Size SK 40

Condition: like new (used), Year of construction: 2019, operating hours: 100 h, functionality: fully functional, machine/vehicle number: F9B192402, feed length X-axis: 450 mm, feed length Y-axis: 350 mm, feed length Z-axis: 400 mm, spindle speed (max.): 5,000 rpm, quill travel distance: 80 mm, rapid traverse X-axis: 5 m/min, rapid traverse Y-axis: 5 m/min, rapid traverse Z-axis: 5 m/min, total height: 1,990 mm, total width: 2,030 mm, total length: 1,980 mm, table width: 270 mm, table length: 400 mm, type of input current: three-phase, rotational speed (max.): 5,000 rpm, rotational speed (min.): 10 rpm, table load: 450 kg, overall weight: 2,270 kg, input voltage: 400 V, workpiece weight (max.): 450 kg, input current: 16 A, input frequency: 50 Hz, Equipment: CE marking, documentation/manual, rotational speed infinitely variable, EMCOMAT FB-450 MC with Sinumerik 828D Contouring control with “manual Machine” Bwedpfx Aexapdcjc Tot Universal Milling- and Drilling-Machine with Sinumerik 828D Contouring control and hydraulic tool clamping working area X450/Y350/Z400mm 7/10kW power Spindle speeds from 10-5000 U/min feeds from 10-5000 mm/min rapid traverse up to 5000 mm/min toolmaker accuracy DIN8615 tool clamping acc. DIN 69871 SK40 including:  linear guides  ball screws  vertical milling head +/-90° swivelling with 80mm sleeve stroke  swivel device for vertical milling head  hydraulic tool clamping  coolant equipment  LED-machine lamp  automatic central lubrication  rigid angle table 800x400mm  chip box  operating tools  dokumentation  executing with open work area protection (mode3)  controlled and manual version in one mashine  Sinumerik 828D Contouring control incl. Control unit in 3-Axis with ballsrews and servodrives, Conversational cycles entry with grapfic support: Drilling cycles for drilling, pecking, reaming and tapping on linear and circular hole patterns, Milling of rectangular and circular pockets and studs, Slot milling cycle, Face milling cycle, ... USB Interface,

Condition: good (used), Year of construction: 2000, High-performance CNC vertical machining center with SIEMENS 840 D, dual pallet changer, internal coolant system, linear guides, and 30-tool automatic tool changer. Table size: 2 x 1000 x 450 mm Tool holder DIN 69871: ISO 40 Travel ranges: X-axis: 1100 mm Y-axis: 500 mm Z-axis: 640 mm Spindle speed range: 50 – 10,000 rpm Table load: 600 kg Feed rate range, X/Y/Z, stepless: -10,000 mm/min Rapid traverse in all axes: 30 m/min Drive power: 18.5 kW Machine dimensions L x W x H: approx. 3605 x 3041 x 3220 mm Weight: approx. 6700 kg Bsdpfx Acsd I R E Ne Towt Accessories / Special features: • CNC control system SIEMENS 840 D • Dual pallet changer • 30-tool automatic tool changer • Full enclosure with safety doors, electrically secured • High spindle speed up to 10,000 rpm and drive power of 18.5 kW • Linear guides with double roller recirculating bearing, allowing high torques to be absorbed evenly in all directions • Ball screws in all 3 axes • The entire machine bed is made of Meehanite cast iron, ensuring precision, rigidity, and vibration damping • Tool holder DIN 69871, ISO 40 • Chip conveyor with integrated coolant system • 4th axis pre-configured • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: used, Year of construction: 2014, turning diameter: 340 mm, turning length: 2,000 mm, total length: 4,270 mm, total width: 2,130 mm, total height: 1,840 mm, overall weight: 3,900 kg, 2-Axis Teach-In / Cycle controlled CNC Lathe CNC Control Fagor 8055 I Power TC Turning diameter 340/570 mm Turning length 2000 mm Bjdpfezv Sdksx Ac Tswt Center height 275 mm Spindle bore diameter 108 mm Spindle nose D 1-8 Spindle speed 0-2.500 R/min Movement X-axis 310 mm Movement Z-axis 2000 mm If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: R2EU2002, CNC lathe with main spindle and 12-position turret Manufacturer: EMCO TURN E45 Year of manufacture: 2006, serial number R2EU2002 Bsdpfx Aceyzn N Ns Towt Control system: Siemens, type Sinumerik Feeding system: EMCO Compact Load E45 Turning diameter: 220mm Chip conveyor: Knoll Attractive offer – flexible and worry-free We offer you not only a high-quality product but also tailor-made financing options that adapt to your needs. Whether it's a down payment, installment payment, or individual financing models – together we will find the right solution. Upon request, we also take over the complete transport organization. From planning to reliable delivery, we ensure a smooth and timely process so that you don't have to worry about anything. 📞 Please feel free to contact us for more information or a non-binding offer. We will provide you with personal and competent advice.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Very nice machine, originally used for vocational training, with a digital display and good accessories. Available in our warehouse from the middle of week 37. Estimated price: €18,500 net. Bedpfx Aezxycmec Tewt

Condition: ready for operation (used), Year of construction: 2018, operating hours: 3,716 h, travel distance X-axis: 260 mm, travel distance Y-axis: 40 mm, travel distance Z-axis: 610 mm, total height: 2,060 mm, total width: 3,450 mm, overall weight: 6,500 kg, controller manufacturer: SIEMENS, product length (max.): 2,800 mm, number of axes: 3, This 3-axis EMCO Emcoturn 65 was manufactured in 2018. It features a maximum machining diameter of Ø500 mm and a maximum machining length of 520 mm. The machine offers an impressive X-axis travel of 260 mm and Z-axis travel of 610 mm. If you are looking to get high-quality turning capabilities, consider the EMCO Emcoturn 65 horizontal turning machine we have for sale. Contact us for further details. • Number of spindles: 2 • Spindle motor power: Main spindle: 17 / 22 kW; Counter spindle: 11 / 16.5 kW • Spindle speed range: 60 – 5000 rpm • Spindle bore: Ø73 mm • Number of tool slots: 12 • Rotating tools: yes • Lubrication tank: 10 l • Pump drive power: 0.57 / 2.2 kW • Air pressure: 6 bar • Cooling pressure: 3.5 bar (optional 14 bar) • Air supply: 5 l/min • Swing over bed: Ø610 mm • Swing over cross slide: Ø360 mm • Distance between centers: 682 mm • Distance between spindle noses: 840 mm • Max. machining diameter: Ø500 mm • Max. machining length: 520 mm • Max. bar capacity: Ø65 mm • Main spindle spindle nose: A2-6 • Main spindle bearing Ø: 105 mm • Main spindle torque (40% DC): 305 Nm • Max. chuck size: Ø250 mm • Counter spindle torque (40% DC): 80 / 125 Nm • Counter spindle spindle nose: A2-6 • Counter spindle max. chuck: Ø200 mm • C-axis resolution: 0.001° • Turret type: VDI30 • Turret max. speed: 5000 rpm • Turret max. power: 6.7 kW Bsdpfoztc Rcjx Ac Tjwt • Turret max. torque: 25 Nm • Turret indexing time: 0.2 s • Rotary tools: VDI30 • Rotary tools speed: 0 – 5000 rpm • Rotary tools torque: 25 Nm • Rotary tools power: 6.7 kW • Coolant system tank capacity: 230 l • Coolant system flow rate: 15 / 65 l/min • Hydraulic unit max pressure: 50 bar Technical Specification Through-spindle Coolant No Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2001, spindle speed (max.): 3,000 rpm, travel distance X-axis: 220 mm, travel distance Z-axis: 1,000 mm, spindle motor power: 8,300 W, total height: 1,700 mm, total width: 1,750 mm, overall weight: 1,800 kg, controller manufacturer: FAGOR, controller model: 8055, product length (max.): 2,670 mm, number of axes: 2, Horizontal turning machine manufactured in 2001. This EMCO EMCOMAT 200X1000 features a turning length of 1,000 mm and a maximum turning diameter over bed of 400 mm. It is equipped with a Fagor 8055 CNC control unit and includes a SMW AUTOBLOCK wedge-type chuck and a Multifix quick-change tool holder. If you are looking to get high-quality turning capabilities, consider the EMCO EMCOMAT 200X1000 machine we have for sale. Contact us for further details. Bsdpfx Aozrvktec Tjwt - Description: 2-axis teach-in / cycle-controlled CNC lathe with Fagor 8055 CNC control- Control Unit: Fagor 8055 (CPU 8055/AB-T, AXES 8055, I/O 8055)- Distance between centers: 1000 mm - Center height (distance above centers): 200 mm - Max swing over bed: Ø 400 mm- Turning length: 1,000 mm- Maximum turning diameter over slide: 220 mm- Travel range, Z-axis: 1,000 mm- X-axis travel: 220 mm- Turning tool cross-section: 20x20 / 25x25 mm- Spindle thread: Camlock 5- Internal taper: 1:20- Spindle bore: ø51.6 mm- Spindle speed: 0–3000 rpm, continuously variable- AC Motor Drive: 18.5 / 8.3 kW- Tailstock Quill Diameter: 52 mm / MK4- Tailstock Quill stroke: 145 mm- Power supply: 400 V / 3-phase / PE- Rated power: 10 kVA- Included Equipment / Accessories:- SMW AUTOBLOCK wedge-type chuck (includes several base jaws)- Multifix quick-change tool holder (includes several different tool holders), chuck key- Drill chuck- Rotating center- Safety device fully functional Technical Specification Counter Spindle No Driven Tools No

Condition: excellent (used), Year of construction: 2015, operating hours: 6,271 h, functionality: fully functional, spindle speed (max.): 6,000 rpm, type of input current: three-phase, total height: 1,800 mm, total length: 1,700 mm, total width: 1,250 mm, overall weight: 1,200 kg, Very good condition. Primarily used for producing small series in plastic. Year of manufacture: 2015. Can be inspected during production until week 37 of 2026. Control system: Siemens 828 D Inspection possible at any time by appointment. Technical data: Turning diameter over the compound slide 85 mm Turning diameter over the bed 250 mm Maximum turning diameter 85 mm Maximum turning length 225 mm Bar diameter max. 25.5 mm Travel: Z-axis 300 mm X-axis 100 mm Tool turret with 12 tool positions, VDI16, of which 6 are driven. Spindle speeds 0 - 6000 rpm Main spindle: C-axis (spindle, resolution) 0.001 ° Machine weight approx. 1200 kg Dimensions: Length 1700 mm Width 1250 mm Height 1800 mm Bjdpozxpt Iefx Ac Tswt Accessories: 2 axially driven tools, 2 radially driven tools, 8 VDI16 tool holders, Collet chuck for collets of type: 385E, Parts catcher, LED indicator lamp. 4 wedge shims, machine documentation.

Condition: excellent (used), Year of construction: 2006, EMCO E65 TCM CNC turning machine Technical specifications •Manufacturer: EMCO •Model: E65 •Year of manufacture: 2006 •Machine number: R6EU1351 •Control system: Fanuc 0i •Bar diameter: Ø 65 mm Bedpezvpqhjfx Ac Tswt •Axes: X / Z / C – 210 / 610 mm / 360° •Tool turret: 12 driven tool stations •Tool holder: VDI 30 Equipment •Bar loader •Chip conveyor •12 driven tool stations •VDI 30 interface Software options •Manual Guide i •Polar interpolation •Cylindrical interpolation •Helical milling

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Universal milling machine EMCO FB-4 with 3-axis digital display Heidenhain, in very good condition. Technical data: >> Year of manufacture: 1997 >> Fixed angular table (clamping area 800 x 400 mm) >> Speed: 18 speed stages from 63 - 3150 rpm >> Mechanical feed: 18 stages Feed rate X and Y: 16-800 mm/min Feed rate Z: 8-400 mm/min Rapid traverse X and Y: 2400 mm/min Rapid traverse Z: 1200 mm/min >> Travels X/Y/Z: 450/300/350 mm >> Equipment: Vertical & horizontal spindle >> Vertical quill, extendable 100 mm >> Tool holder: SK40 >> Weight approx. 1500 kg >> Machine dimensions L x W x H: 1485 x 1475 x 1680 mm >> Motor brake >> Connection value: 4 kVA Accessories and equipment: Bwedpfjzq Efqsx Ac Tot >> 3-axis digital display Heidenhain >> Coolant system >> Chip tray, machine feet >> Operating manual, spare parts list About the machine: Offered is a universal milling machine EMCO FB-4 in very good condition. The EMCO runs very smoothly, even at high speeds. The vertical milling head is fastened with four screws and can be easily swung to the side using the articulated arm visible on the left side of the machine. Feed and rapid traverse in each axis. The Emco comes from a training workshop and has been used very little. Take advantage of the opportunity to inspect and test the machine on-site while it is powered up.

Condition: ready for operation (used), Year of construction: 1991, A CNC vertical machining center Emco is available. Travel X/Y/Z: 420mm/330mm/400mm, table dimensions X/Y: 650mm/320mm, max. table load: 150kg, tool positions: 12, tool holder: SK40, speed: 4500rpm, rapid traverse: 12m/min. Machine dimensions X/Y/Z: approx. 2400mm/2300mm/2450mm, weight: approx. 2750kg, control: Emcotronic TM02. An on-site inspection is possible. Bwedpfoy H I H Sex Ac Tjt

Year of construction: 1996, condition: ready for operation (used), Offered is a slant bed CNC lathe. Bar capacity: 65mm, travel X/Z: 160mm/510mm, control system: Siemens Sinumerik. Equipped with bar loading magazine. Weight: approx. 3500kg, overall dimensions X/Y/Z: approx. 2800mm/1800mm/1900mm. Inspection possible by arrangement. Expected to be available starting February 2027. Bwodpfx Aey Ulnioc Tot

Condition: good (used), EMCO E-900 CNC vertical machining center Bsdszxc Npopfx Ac Tjwt Technical details: Travel X/Y/Z: 900mm/500mm/500mm, Table dimensions X/Y: 1000mm/520mm, Max. table load: 800kg, Spindle speed: 10000rpm, Spindle power: 11kW, Tool holder type: SK40, Rapid traverse: 24m/min. Machine dimensions X/Y/Z: approx. 2600mm/2450mm/2950mm, Weight: approx. 4800kg, Control: Siemens Sinumerik 810D Shopmill Accessories/options: - tool holders SK40 - documentations - coolant tank Under power in our warehouse, inspection is available at anytime. Videos are vailable upon request!