Used Eisele Lms for sale (109)

Condition: used, Year of construction: 1989, saw blade diameter 350 mm cutting diameter 115 mm capacity 90 degrees: flat 200 x 80 mm turning speeds 1700/3400 U/min saw-blade dia. 350 x 3.3 x 40 mm motor 400 Volt Hfjdpfx Aaexabw Uocsn total power requirement 1.8 / 2.6 kW weight ca. 600 kg range L-W-H 1000 x 850 x 1500 mm - in checked condition - machine video - ?v=k-VA1e8rSJI Equipment: - semi-automatic aluminum circular saw - pneumatic material clamping - stepless adjustment of the saw head lowering speed - machine table with miter adjustment - machine base frame

Condition: good (used), Year of construction: 1967, Metal Chop Saw Type LMS I Hfodpfxoxa Hkmj Aacon - Year of manufacture: 1967 - 380 Volts - 1450 rpm; 2950 rpm - 1.8 kW

Year of construction: 1967, condition: used, machine/vehicle number: 9317, disk of circular saw-Ø: 275 mm cutting area at 90°: 120 x 75 mm cutting area at 45°: 90 x 65 mm rotations of disk: 2000 rpm Hedpfsb N Eicox Aacsfn engine: 380 V, 1,1 kW space needed: 700 x 900 x 1000 mm

Condition: used, Year of construction: 1990, Lg.no. 23415 Technical data: - Saw blade dimension 300 mm Hfsdpfx Aaerkm Scjcon - Saw blade speed 2800 rpm - Cutting range - at 90° 160 x 20 mm - 100 x 80 mm - at 45° 100 x 40 mm - Drive 400 V / 1.5 kW - Space requirement approx. W 400 x H 1200 x D 700 mm - Weight approx. 80 kg - Machine stand - parallel stop

Year of construction: 2000, condition: used, Max. saw blade diameter: 350 mm Hjdpfsw Ddztjx Aacjfn Pneumatic material clamps Micro spray device Saw table can be rotated in both directions

Condition: used, Year of construction: 1991, saw blade diameter 800 x 800 x 1500 mm cutting diameter 200 mm stroke 150 mm dimensions of the machine ca. m Hjdpjvr Hlfjfx Aacefn total power requirement 3 kW weight of the machine ca. t

Condition: used, Year of construction: 1994, Technical details: saw blade diameter: 450 mm revolution per minute: 2820 U/min cutting lenght max.: 5000 mm cutting length min.: 240 mm air pressure - required: 6-8 bar hole of sawblade: 32 mm mitter cutting - both sides: 45+90 ° air-pressure connection: 6 - 8 bar total power requirement: ca. 4,6 kW weight of the machine ca.: 1,1 t dimension machine xH: 6,05x1,49x1,79 m Further features of the machine: - Pneumatic vertical and horizontal tension Hfedpju Nigkjfx Aacjn - pneumatic mist spraying device - height adjustable machine feet - material supports movable with saw - piece counter Cutting diameter according to tabular cutting range diagram, as dependent on speed and saw blade. Accessories: - 2 spare saw blades Machine can be demonstrated under power. i.D. *

Condition: good (used), Year of construction: 1972, Specification VMS II Cut at 90° (Flat) approx. 140 × 70 mm Cut at 90° (Round) approx. 80 mm Cut at 45° approx. 100 × 70 mm (Flat), Round: 80 mm Speed 40/80 rpm Coolant available Power approx. 1.4 kW (up to 2 kW) Weight approx. 400 kg (depending on version: 270–500 kg) Hfsdpfow Ecydox Aacjn Dimensions (L×W×H) approx. 1.0 × 0.75 × 1.6 m

Year of construction: 2011, condition: used, Max. saw blade diameter: 500 mm cutting range up to 80x 200 mm Feed length: max. 800 mm with digital display Saw blade speed: 2,000 - 3,800 rpm Piece counter with automatic shutdown when setpoint is reached Continuously adjustable pneumatic material feed Hydropneumatic saw feed Pneumatic material clamps Spray device Hfedjxl Dz Tepfx Aacon Only 4400 operating hours Including instruction manual Machine dimensions: 2100 x 1100 x 1500 mm (WxDxH)

Year of construction: 1997, condition: excellent (used), A used very good condition cold circular saw from EISELE equipped with 370mm circular saw blade, infinitely variable hydro-pneumatic feed, pneumatic material clamping, coolant device and documentation. Hfodpfx Aekfp D Toacon Speed: 17/ 34 rpm Cutting range: Round 90°/ 45° r. l./ 30° r. 130/ 130/ 105mm. square 90°/ 45° r. l./ 30° r. 120x120/ 100x100/ 90x90mm rectangle 90°/ 45° r. li/ 30° r. 200x100/ 140x100/ 100/100mm Pneumatic connection 7 bar working height 900mm Machine dimensions WxDxH 865x1332x2175mm Weight 460kg Further tech. Data see pdf. document Tech. Data and dimensions: Errors excepted

Condition: good (used), Year of construction: 2002, Behringer Eisele VA-0-250-NC Circular saw TECHNICAL DATA Sawing range: 90 ° Saw blade diameter: 25 cm Bore: 40 mm Cutting range: 10-75 mm Cutting length: 5-900 mm Speed: 2800 rpm Cutting speeds: 26/52/103/206 SFPM or 0.13/0.26/0.52/1.05 m/s Feed speeds: 0-40 mm/sec NC axis: Yes Hjdpfxovdk A Ej Aacefn Dimensions: 190 x 127 x 190 Weight: 1300 kg We assume no liability for the accuracy, completeness and up-to-dateness of the information provided

Condition: ready for operation (used), Year of construction: 1989, Saw blade Ø: 350 mm Cutting capacity: at 90° & 45°, round: 120 mm Hsdpfxoxln Uke Aacofn at 90°, flat: 170 x 100 mm at 45°, flat: 120 x 100 mm at 90°, square: 100 mm at 45°, square: 95 mm 2 saw blade speeds: 17/34 rpm Drive motor: 400 V, 2/2.6 kW Weight: 425 kg Required space: 900 x 800 x 1800 mm

Condition: good (used), Year of construction: 1993, Mitre saw, saw unit right left, double mitre saw, crosscut and mitre saw, double end tenoner -Manufacturer: Emmegi, Pressta Eisele, double mitre saw type SINGLE 2 HM500 -Cutting length: 250 to 5000 mm -Saw units: 45° pivotable -Saw blade: Ø 500 mm -Cutting data 90°: Cutting height 350 mm Cutting width 160 mm -Cutting data 45°: Cutting height 260 mm Cutting width 125 mm Hjdpotxkprsfx Aacefn -Dimensions: 5750/1220/H1700 mm -Weight: 1200 kg

Condition: used, Year of construction: 2014, machine/vehicle number: 0101-250007, The Behringer Eisele HCS 160 MF Straight Cut Fully Automatic Metal Circular Saw is a high-quality, robust machine specifically designed for professional use and maximum cutting performance in metalworking, additionally engineered for multi-shift operations. It offers an excellent combination of power, precision, and versatility, making it particularly suitable for large production runs. The fully automatic saw comes equipped with a comprehensive material loading and unloading system. The loading magazine is positioned on the infeed side, while on the outfeed side, short pieces can be discharged from the conveyor into designated containers at three different positions using a pusher via the unloading device. Hfsdexl R Nkepfx Aacon

Year of construction: 2006, condition: used, Max. saw blade diameter: 500 mm cutting range up to 80x 200 mm Feed length: max. 800 mm with digital display Hfjdpfx Aevcmirjacjn Saw blade speed: 2,000 - 3,800 rpm Piece counter with automatic shutdown when setpoint is reached Continuously adjustable pneumatic material feed Hydropneumatic saw feed Pneumatic material clamps Spray device Only 2200 operating hours Including instruction manual Machine dimensions: 2100 x 1100 x 1500 mm (WxDxH)

Condition: used, Mitre Cold Circular Saw EISELE Type VMS-II-S Model No. 421 Serial No. V 2295 Year of manufacture: 1984 Cutting capacity at 90° (round): Ø 120 mm Cutting capacity at 90° (rectangular): 120 x 90 mm Saw blade diameter max.: 350 mm Blade speed: 40 - 80 rpm, 2-step Mitre cuts: 45° to the left, 90°, and continuously adjustable up to 30° (60°) to the right Motor power: 1.4 and 1.9 kW Hodoxk Uunopfx Aacofn Power supply: 380 Volt, 50 Hz - Two cutting speed stages via two motor speeds - Manual saw carriage lowering via adjustable lever - Manual material vice, side-adjustable - Coolant system with electric coolant pump integrated in machine base - Equipped with one saw blade, approx. Ø 350 mm - Outfeed roller conveyor 750 mm with simple length stop up to 1000 mm, fixed to the machine base - Infeed roller conveyor 2350 mm with simple length stop up to 2500 mm, free-standing - Usable roller width: 180 mm Space requirement of base machine with outfeed roller conveyor (L x W x H): 1400 x 850 x 1700 mm Base machine weight: approx. 450 kg Infeed roller conveyor weight: approx. 140 kg Good condition

Condition: good (used), Year of construction: 1980, functionality: fully functional, Type VMS III - PV Machine No. 8518 Hfodpfx Aajxmuzaecsn Year of construction 1980 Technical data : 2-stage saw motor 2.0 / 2.6 kW Saw blade 350 mm 4 cutting speeds 8.5 / 17 / 34 / 68 rpm Clamping range, flat / round 200 / 120 mm Feed length, single stroke 5 - 600 mm Feed length, double stroke 1200 mm

Condition: excellent (used), Year of construction: 2007, Saw blade diameter: 370 mm Cutting capacity flat at 90/45/30°: 200 x 100 / 140 x 100 / 100 x 100 mm Cutting capacity square at 90/45/30°: 120 / 100 / 90 mm Cutting capacity round at 90 & 45 / at 30°: 130 / 105 mm Hsdpjxlgz Nefx Aacjfn 2 saw blade speeds Drive motor: 2 / 2.6 kW Weight: 430 kg Space required: 800 x 700 x 1770 mm

Year of construction: 2023, operating hours: 109 h, condition: like new (used), functionality: fully functional, High-performance extraction unit for aluminium chips MG 9V Centrifugal fan with soundproofed housing, M-class filter, chips fall downwards into a customer-supplied container, max. drop height 1,100 mm Hfodpfx Asxmhkbeacjn Drive: 4.0 kW, 400 V, 50 Hz, max. air volume flow 4,000 m3/h, noise level below 80 dB(A), selector switch for continuous operation or control via the saw. Equipped with 2 connection nozzles D160 mm, dimensions when assembled: 1825 x 1140 x 4675 mm, finish RAL 9016

Condition: used, Year of construction: 1985, dimensions of saw-blade Ø 320-350 x 3.0 mm cutting range 120 mm capacity 90 degrees: square 90 x 90 mm capacity 90 degrees: flat 200 x 90 mm capacity 45 degrees: flat 140 x 90 mm Hfodpfx Aajxacbnecon work height max. 925 mm saw blade turning speeds 17 / 34 U/min compressed air 6.0 - 8.0 bar engine output 1400 / 2800 U/min. total power requirement 2.0 / 2.6 kW weight 470 kg range L-W-H 850 x 900 x 1800 mm Machine from a vocational school (NL) maintained condition (!!) Furnishing : - semi-automatic vertical cold circular saw - pneumatic material quick-clamping device - Infinitely adjustable saw blade feed - Convenient miter adjustment with fixed stops - Convenient stroke adjustment of the saw unit using a clamping lever - Generously sized gearboxes - with Eisele rotation compensation for long saw blade service life - Convenient saw blade change - High productivity with minimal space requirements (less than 1 m²) - Coolant device * Machine link: ?machineno=1008-9164094

Condition: good (used), functionality: fully functional, . Fully hydraulic automatic circular saw, manufactured by TRENNJAEGER Hfedpfx Ajxg A Iusacsn . Technical data : Saw motor, pole-switchable 1.5 / 2.0 kW Saw blade 275 mm 6 cutting speeds 16 , 20 , 25 m/min + 32 , 40 , 50 m/min . - Integrated hydraulic system - Protective housing, limit switch-protected - 6 sawing speeds . .

Condition: like new (used), Year of construction: 2024, operating hours: 9 h, functionality: fully functional, machine/vehicle number: 190551920245099737, saw blade diameter: 500 mm, We are selling a saw-drilling-threading automation machine, Profilma 540 BG, designed for cutting to length, drilling, and threading of aluminium profiles. This is a special-purpose machine that was purchased for the production of solar components. The scope of delivery includes: - Roller conveyor RD500, length 6000 mm - Pre-installation for chip extraction MG9 - Database for storing cutting data under profile number Hedpfoxmhhgsx Aacefn - 32 pcs combined machine taps M8x1.25 - 2 pcs carbide saw blades 500x3 mm The machine has only 9 operating hours.

Condition: used, Year of construction: 1998, dimensions of saw-blade 350 x Ø 40 x 3 mm cutting range 120 mm capacity 90 degrees: square 100 x 100 mm capacity 90 degrees: flat 170 x 100 mm capacity 45 degrees: round 120 mm capacity 45 degrees: square 95 x 95 mm capacity 45 degrees: flat 120 x 100 mm capacity 60 degrees: round RE 100 mm capacity 60 degrees: square RE 85 x 85 mm capacity 60 degrees: flat RE 85 x 100 mm work height max. 900 mm saw blade turning speeds 17 / 34 U/min compressed air 6.0 - 8.0 bar total power requirement 1.4 / 1.9 kW weight 340 kg range L-W-H 1010 x 765 x 2175 mm Furnishing : - semi-automatic vertical cold circular saw - pneumatic quick clamping device Hfjdpfx Asxabk Usacen - Infinitely adjustable saw blade feed - Comfortable miter adjustment - Convenient stroke adjustment of the saw unit via clamping levers - Generously sized gearboxes - with Eisele rotation compensation for a long saw blade service life - Convenient saw blade change - High productivity with the smallest footprint (less than 1 m²) - Machine base - Operation manual (PDF) Machine with factory new spare parts (installed): 1x cylinder Pneu/HydrDoppelw.D80HUB190 for saw blade lowering 1x gas spring Hub100 D23 F=800N for safety hood

Condition: excellent (used), functionality: fully functional, Saw blade 440 mm Speeds 12.5 / 25 rpm Motor power 2.6 / 3.2 kW Hydraulic saw feed Hfodpjxd Riuefx Aacon Hydraulic vise Cutting areas: 200 x 100 mm (square tube) 45° miter on one side Weight approx. 750 kg .

Condition: like new (used), Year of construction: 2024, operating hours: 190 h, functionality: fully functional, machine/vehicle number: 190551920245099676, saw blade diameter: 500 mm, We are selling a saw automatic saw-punching solution Profilma 502ST-V for cutting to length and punching aluminium profiles. This is a special-purpose machine that was acquired for the production of solar mid clamps. Hjdpjxmhf Esfx Aacefn