Used Eisele Vms 3 for sale (112)

Condition: used, Year of construction: 1989, saw blade diameter 350 mm cutting diameter 115 mm capacity 90 degrees: flat 200 x 80 mm turning speeds 1700/3400 U/min saw-blade dia. 350 x 3.3 x 40 mm motor 400 Volt total power requirement 1.8 / 2.6 kW weight ca. 600 kg range L-W-H 1000 x 850 x 1500 mm - in checked condition - machine video - ?v=k-VA1e8rSJI Hedpfoxabw Ujx Aacjnu Equipment: - semi-automatic aluminum circular saw - pneumatic material clamping - stepless adjustment of the saw head lowering speed - machine table with miter adjustment - machine base frame

Condition: good (used), Year of construction: 1967, Metal Chop Saw Type LMS I - Year of manufacture: 1967 - 380 Volts - 1450 rpm; 2950 rpm Hnedpfx Aajxa Hkmocju - 1.8 kW

Condition: used, Hydraulic operation via foot switch Profile height max. 120 mm Abutment stroke 100 mm Punching stroke 50 mm Press force 38 kN Engine power: 3 kW Weight approx. 500 kg Hedpsw U Slgofx Aaconu

Condition: good (used), Year of construction: 1987, Saw head with pneumatic feed cylinder for aluminum and non-ferrous metals Saw blade size 370 mm, 1700 + 3400 rpm • Feed cylinder with pneumatic control and limit switch • Double clamping arm (pneumatic) Hnjdpfx Aajxcp Iascsu

Year of construction: 1970, condition: good (used), machine/vehicle number: 1258, disk of circular saw-Ø: 315 mm cutting area at 90° round: 90 mm Hnodpfx Aeh I Dvnsacou cutting area at 90° square: 80 x 80 mm cutting speeds: 12,5 - 25 m/min forward feed speeds: hydropneumat. stufenl. regelbar cutting length: 5 - 1580 mm saw drive: 380 V, 1,8/2,5 kW space needed: 2300 x 1000 x 2800 mm weight: 940 kg

Condition: good (used), Year of construction: 1990, machine/vehicle number: 2455, Offer 25293 Technical data: - Max. profile height up to 160 mm Hodpfjxdh Uzjx Aacsnu - Max. profile width 100 mm - Repetition stroke 100 mm - Punch stroke 20 mm - Punching force at 6 bar: 35 kN - Operating pressure: 6 – 8 bar - Air consumption per cycle approx. 30 l - Equipped with: - Foot switch - 2 vertical pneumatic hold-down devices - Adjustable punching heads - 2 swiveling support arms - Required space approx. W 980 x H 1400 x D 800 mm - Weight approx. 180 kg

Condition: good (used), Year of construction: 1995, functionality: fully functional, saw blade diameter: 450 mm, type of input current: three-phase, input voltage: 380 V, length stop: 4,000 mm, Cold circular saw Eisele PSU 450, well-maintained and fully functional condition, with electro-pneumatic length stop, including various segment and solid steel saw blades. Hnodpfxjw U Ahrj Aaceu

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, overall weight: 360 kg, • Dimensions (W × H × D): 900 × 1,180 × 750 mm • Weight: approx. 360 kg • Drive type: hydropneumatic • Operating pressure: 8 bar • Air consumption: 40 l / stroke at 8 bar • Pressing force: 32 kN at 8 bar • Pneumatic connection: R ¼" • Press stroke: 17 mm • Return stroke: 140 mm Hnsdpfx Aaoxl Hq Rsceu • Maximum pressing height: 150 mm • Maximum profile height: 210 mm

Condition: used, Hydropneumatic operation Max. punching height: 90 mm Abutment stroke: 100 mm Hedpfxow Inude Aaconu Punching stroke: 20 mm Pressing force: 30 kN Max. profile height: 100 mm Weight: approx. 280 kg

Condition: good (used), functionality: fully functional, Technical data : Saw motor, pole-changing 1.0 / 1.6 kW 6 cutting speeds : Motor speed 1/2 8 , 10 , 12.5 m/min and 16 , 20 , 25 m/min Cutting range 90 degrees with blade size 360 mm : round 110 mm flat 200 x 80 mm Hsdpfx Aasxbbi Tocjnu . Saw blades 315 / 360 mm Hydraulic saw feed Hydraulic material feed, min. 10 mm Hydraulic material clamping 2 additional saw blades . --> --> Special price : EUR 4.150,-- net , free loaded ! . .

Year of construction: 1967, condition: used, machine/vehicle number: 9317, disk of circular saw-Ø: 275 mm cutting area at 90°: 120 x 75 mm Hjdpsb N Eicsfx Aaconu cutting area at 45°: 90 x 65 mm rotations of disk: 2000 rpm engine: 380 V, 1,1 kW space needed: 700 x 900 x 1000 mm

Condition: good (used), Year of construction: 1980, machine/vehicle number: 2038, Offer 24272 Technical data: - Saw blade dimension 300 mm - Saw blade speed 2800 rpm - Cutting range - at 90° 160 x 20 mm - 100 x 80 mm - at 45° 100 x 40 mm - Drive 400 V / 1.5 kW - Space requirement approx. W 400 x H 800 x D 600 mm - Weight approx. 80 kg Hodpet H Ibmsfx Aaconu - Table base W 900 x H 750 x D 500 mm

Condition: like new (used), Year of construction: 2024, Overhauled: 2024 Year of manufacture: 1994-2000 Saw blade 560 mm Motor power 6,5 / 8,0 KW Speed 1500/3000 min-1 Cutting speed 2100 - 4200 m/min Saw height control: electronic Working range square max.: 170x170 mm Working range flat max.: 300x150 mm Working range round max.: 200 mm Saw feed 0 - 40 mm/s infinitely adjustable Cutting length 5-950 mm (9999 mm multiple stroke) Feed speed max. 500 mm/s Weight approx. 1900 kg Dimensions LxWxH 2200mm x2700mm x1950mm The machine is in mint condition, both technically and visually, following a completed retrofit. Due to its equipment and design, the machine can be used very efficiently for a wide range of applications. The programmed HMI control system ensures simple and very profitable operation of the machine. The soundproof cabin reduces noise emissions to a minimum. The machine is generally overhauled in our company at the customer's request. Among other things the following points will be renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI user interface - Replacement of the ball screw - Replacement of servo motor and servo inverter - New electrical components - New pneumatic lines - New pneumatic components - Overhaul or replacement of all pneumatic cylinders - Renewal of the valve terminal - Optimization of extraction performance - Overhaul of minimum lubrication system - Replacement of general wear parts - Overhaul of the cab The machine also has: Hodpfouiy Hrjx Aaconu - Soundproof cabin - Splitting extension (for a high-quality cutting surface without return marks) - Height control fully electronic Warranty: Unless otherwise agreed, we provide a 6-month guarantee on all parts overhauled or replaced by us. Working time and wearing parts are excluded from the guarantee. Optional: - Mass clamping device for parallel sawing of several workpieces - Flat magazine for automatic feeding of up to 6 m long primary materials - Roller conveyors for primary material - Reinforced motor 18.0 KW (frequency-controlled) - Delivery and installation on your premises - Training of your employees

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, High-performance automatic sawing machine / Brand: PRESSTA-EISELE Type: Profilma 510 / Year of construction: 09/2008 Description: * High-performance automatic sawing machine with fully automatic operation, * Very high cutting accuracy, * Low cycle times, * Burdere-free sawing, * High reliability, * Low maintenance Suitable for aluminum and plastic, for cutting large quantities of small parts, length tolerance 1/10 mm. The automatic sawing machine can be inspected and tested by appointment. Previous use: Used for cutting corner connectors. Condition: Very well maintained, used, ready to use. Technical specifications: - Saw motor: 7,5 kW, S6 - Speed: 2.000 - 3.500 rpm - Cutting speed: up to 92 m/s - Material feed length: up to 1.000 mm / 5-fold reversal possible - Section length: from 8 mm depending on profile - Remaining piece length: from 90 mm depending on section length - Working pressure: 6 - 8 bar - Power supply: Standard: 400 V, 50 Hz - Weight: 1.750 kg - Dimensions Length/Depth/Height: 2.700 x 1.400 x 2.300 mm Equipment: - Control via Siemens S7 panel - Fully automatic bar feed - Roller conveyors - Extraction - Chip bunker - Various accessories Hnedpfxow D T Uis Aaceu - CE marking There is no guarantee for correctness and completeness of the technical details and accessories.

Year of construction: 2000, condition: used, Max. saw blade diameter: 350 mm Pneumatic material clamps Micro spray device Saw table can be rotated in both directions Hedpfow Ddztjx Aacenu

Year of construction: 1996, condition: good (used), machine/vehicle number: 9182, Offer 23168 Technical data: - Notching possibilities + miters in 3 planes - right-angled, one-sided + two-sided + three-sided oblique . - Can be used as a shift cut crosscut saw - Pneumatic profile clamping Machining with semi-automatic sawing units - Saw blade dimensions - vertical 500 x 3,5 x 40 mm positive - horizontal 500 x 3,5 x 40 mm negative - notching width / notching height at 90° 300 / 285 mm - vertical saw blade 60° - 90° - 25° mot. positioning with digital display - Swiveling range saw blade horiz. with vert. saw blade Saw blade - 45° - 90° - 45° mot. positioning with digital displays - Notching height adjustment with digital displays - profile stop shoulder manually tiltable 30° - 90° - 45° - pneumatic coolant check device Hedpfx Ajmb U E Aoaconu - air connection 6 bar - drive 400 V / 2 x 3 kW - space requirement approx. W 2400 x H 2000 / D 1400 mm - weight approx. 1200 kg

Condition: refurbished (used), Year of construction: 2024, Eisele VA-L-350 Retrofit Fully automatic high-performance sawing machine with feed chain magazine for non-ferrous metals and plastics Manufacturer: Eisele Type: VA-L-350 Overhaul year: 2024 Saw blade, carbide: 350-400 mm Drive power, saw motor: 15 KW Saw motor speed: 1500 - 6000 min-1 Saw blade cutting speed: 1650 - 7500 m/min Saw blade feed steplessly adjustable: hydraulic Saw height control infinitely variable: fully electronic Working range square 90° max.: 130 x 130 mm Working range flat 90° max.: 200 x 100 mm Working range round 90° max.: 130 mm Feed length single stroke: 5-900 mm Multiple stroke 5-9999 mm Feed speed servo-controlled feed unit: 350 mm/s Compressed air connection on site: 6-8 bar Weight (saw)approx.:1600 kg (magazine)approx.:2200 kg (optional) Dimensions LxWxH (saw)approx.: 1800mm x1300mm x1950mm (magazine)approx.: 7300mm 3900mm x1200mm (optional) Installation dimensions LxWxH approx.: 9200mm x4800mm x2800mm Thanks to its equipment and design, the machine can be used very efficiently for a wide range of applications. The PLC control system ensures simple and very profitable operation of the machine. Thanks to the powerful motor, short cycle times can be achieved even when sawing thick-walled profiles or solid materials. The soundproof cabin reduces the resulting noise emissions to a minimum. The machine is overhauled in our company at the customer's request. Among other things, the following points will be renewed: - Conversion to Siemens S7 Hnodpfouizlpex Aacsu - Renewal of the ball screw drive - New hydraulic lines (hydraulic version) - New pneumatic lines (pneumatic version) - New pneumatic and/or hydraulic components - Overhaul of the control valves - Optimization of the suction performance - Overhaul of the Menzel minimum lubrication system - Replacement of general wear parts - Overhaul of the cab - Replacement of all bearings and wear parts - Replacement of servo and frequency converter The machine is also equipped with - Reinforced motor 15 KW - Minimization of the material residue - Soundproof cabin - Splitting extension (for a high-quality cut surface without return marks) Warranty: Unless otherwise agreed, we provide a 6-month guarantee on all parts overhauled or replaced by us. Working time and wearing parts are excluded from the warranty. Optional: - Mass clamping device for parallel sawing of several workpieces - Hydraulic clamping system - Flat magazine for automatic feeding of primary materials up to 6 m long - Roller conveyors on the infeed side - Roller conveyors on the outfeed side - Delivery and installation on your premises - Training of your employees

Year of construction: 1998, condition: used, Long-cutting saw for cutting aluminum profiles with feed pusher in very good condition Max. cutting length: 700 mm Max. cutting height: 130 mm Max. saw blade diameter: 450 mm Hnodpfx Aaswx I Hveceu Maximum feed length of the material pusher 6,200 mm The system is disassembled in our warehouse Further technical data on request

Condition: used, Year of construction: 1990, Lg.no. 23415 Technical data: - Saw blade dimension 300 mm - Saw blade speed 2800 rpm - Cutting range - at 90° 160 x 20 mm - 100 x 80 mm - at 45° 100 x 40 mm - Drive 400 V / 1.5 kW Hnedjrkm Scjpfx Aaceu - Space requirement approx. W 400 x H 1200 x D 700 mm - Weight approx. 80 kg - Machine stand - parallel stop

Condition: refurbished (used), Year of construction: 2024, General overhaul 2024 Saw blade 350 - 400 mm Motor power 6.5 / 8.5 KW Speed 1500/3000 min-1 Cutting speed 1650 - 3800 m/min Saw height control: electronic Working range square max.: 120x120 mm Working area flat max.: 200x100 mm Working area flat max.: 250x70 mm (overwidth only) Hedpfouiy A Tex Aacjnu Working range round max.: 130 mm Saw feed 0 - 40 mm/s infinitely adjustable Cut-off length 5-600 mm (9999 mm multiple stop) Feed speed max. 500 mm/s Weight approx. 1300 kg Dimensions LxWxH 1800mm x1300mm x1950mm The machine will be overhauled in our company and will then be in mint condition. Among other things, the following points are renewed: - Conversion to PLC control - Conversion to Siemens HMI user interface - Conversion to ball screw with servo control - New electrical components - New pneumatic lines - New pneumatic components - Conversion to valve terminal - Optimization of the suction performance - New Menzel minimum lubrication system - Replacement of general wear parts - Overhaul of the cab The machine is additionally equipped with - Soundproof cabin - Splitting extension (for a high-quality cutting surface without return marks) Optional: - Mass clamping device for parallel sawing of several workpieces - Flat magazine for automatic feeding of up to 6 m long raw materials - Motor 7.5 KW - 12 KW motor - Delivery and installation on your premises - Training of your employees

Condition: used, Year of construction: 1995, machine/vehicle number: 9104, Offer 24237 Technical data: - Saw blade dimensions - vertical 400 x 3.5 x 40 mm - horizontal 400 x 3.5 x 40 mm - Notching range / notching depth vertical 135 mm - Notching range / notching depth horizontal 105 mm - Notching width at 90° up to 280 mm - Notching width at 30° up to 100 mm Hnsdpfoub Sl Dex Aacsu - Vertical saw blade can be manually tilted 90° - 30° via handwheel - Can be used as a shifter saw without horizontal saw blade - Profile stop shoulder 30° - 90° - 30° tiltable - Digital display - Pneumatic material clamping vices - Pneumatic coolant testing device - Air connection 6 bar - Drive 400 V / 2 x 2.2 kW / 2800 rpm - Space requirement approx. W 2200 x H 1600 x D 1400 mm - Weight approx. 800 kg

Condition: refurbished (used), Year of construction: 2024, Overhaul year: 2024 Saw blade VHM / HSS: 315 - 360 mm Drive power saw motor: 15 KW Infinitely variable speed: 15 - 130 min-1 Saw blade cutting speed (350 mm): 16.4 - 142.8 m/min Saw height control infinitely variable: electronic Working range square 90° max.: 100 x 100 mm Working range round 90° max.: 110 mm Feed length 5-970 mm (9999 mm multiple stroke) Feed speed AC servo max.: 300 mm/s Compressed air connection on site: 6 bar Saw weight approx.: 1800 kg Dimensions LxWxH: 1900mm x 1250mm x 2100mm Footprint LxW: 1900mm x 1250mm Thanks to its equipment and design, the machine can be used very efficiently for a wide range of applications. The HMI interface for controlling the machine ensures simple and problem-free operation of the system. Following a completed retrofit, the machine is in mint condition, both technically and visually. A viewing of this sawing system is possible at any time. The machine will be completely overhauled in our company at the customer's request. Among other things, the following points will be renewed: - Conversion to PLC control Siemens S7 - Renewal of the ball screw drive with servo control - New electrical components - Renewal of the pneumatic lines - New pneumatic components - Overhaul or renewal of the hydraulic lines - Overhaul or renewal of the hydraulic components - Overhaul of the cab - Overhaul of the motors - Replacement of all bearings - Replacement of general wear parts The machine also has - Reinforced motor 15 KW - Soundproof cabin - Splitting extension (for a high-quality cut surface without return marks) - Frequency control motor - Minimum quantity lubrication - Automatic central lubrication system Hnsdeuizinepfx Aacsu - Pneumatic chip space cleaning on the saw blade Warranty: Unless otherwise agreed, we provide a 6-month guarantee on all parts overhauled or replaced by us. Working time and wearing parts are excluded from the warranty. Optional: - Mass clamping device for parallel sawing of several workpieces - Roller conveyor 4m/ 6m - Special roller conveyor 4m/ 6m for bundle clamping - Flat magazine for automatic feeding of up to 6m long primary materials - Online support connection - Delivery and installation on your premises - Training of your employees

Condition: good (used), Year of construction: 2019, machine/vehicle number: 250-19, Offer 25283 Technical Specifications: - Saw blade speed, frequency controlled, for very fine cutting Hnsdsw Nhumspfx Aaceu - Saw blade diameter: 200 mm - Automatic operation cycle - Pressure stop with SICO counter for setting the glass pressing force - Simulation - Pneumatic connection: 6 bar - Drive: 400 V / 0.8 kW - Required space: approx. W 400 x H 1200 x D 700 mm - Weight: approx. 80 kg - Machine stand

Condition: good (used), Year of construction: 2009, machine/vehicle number: 9155, Offer 24245 Technical data: - Pneumatic feed of the milling unit - Work table height adjustable via handwheel - Horizontal and vertical material clamping - cutter diameter up to 300 mm - max. profile height 190 mm - max. milling depth 110 mm - max. milling length 400 mm - Angle-adjustable stop Li + Re 20 90 20 ° - milling spindle speed 2800 rpm - Drive 400 V / 2.2 kw - Compressed air connection 6 - 8 bar - Air consumption per work cycle approx. 10 l - ELGO digital display for material cross stop - Pneumatic profile clamping - Spraying device - Space requirement approx. W 1100 x H 1500 x D 700 mm Hsdpfx Aaotq Takscjnu - Weight approx. 300 kg

Condition: good (used), Year of construction: 2019, machine/vehicle number: 252-19, Offer 25269 Technical specifications: Hnodpfx Aew R S Nweacju - Saw blade speed, frequency-controlled for ultra-fine cutting - Saw blade diameter: 200 mm - Automatic work cycle - Pressure stop with SICO counter for setting glass contact pressure – simulation - Pneumatic connection: 6 bar - Drive: 400 V / 0.8 kW - Required space: approx. W 400 x H 1200 x D 700 mm - Weight: approx. 80 kg - Machine stand