Used Eisele Lms 2 for sale (119)

Condition: good (used), Year of construction: 2023, machine/vehicle number: 1018842, Offer 26151 Technical data: - Saw blade diameter: up to 450 mm - Cutting range with a saw blade diameter of 450 mm: - at 90°: round 150 mm - square 140 mm - flat up to 300 x 95 mm - Miter adjustable: 30° - 90° - 30° - at 45°: round 150 mm - flat 280 x 300 mm - Cutting speeds: 10 / 20 1/min - Feed rate of the saw blade: 0 - 1150 mm/min - Rapid return: 3000 mm/min - Connection: 400 V / 4.8 kW - Hydraulic material clamping device, steplessly adjustable clamping pressure - Adjustability of the backstop - via handwheel with analog display: 0 - 120 mm Lhodpfx Amoy Uwpxjroh - Hydraulic material backstop clamping device - Micro-spray cooling system - Original infeed roller conveyor: 4000 mm - Original outfeed roller conveyor with measuring stop + digital display: 4000 mm - Space requirement: approx. W 1050 x H 1950 x D 1400 mm - Weight: approx. 1200 kg

Condition: used, Heavy saw head with robust base and material clamp for non-ferrous metals and aluminium. More powerful motor, with pneumatic feed and 2 pneumatic material clamps. Lhjdpfx Amozap Hfsroh

Year of construction: 2009, condition: used, Sawing system for aluminum with 2 saw motors that independently perform a 45° cut. Material feed unit with up to 8,100 mm Cross conveyor, storage table, chip conveyor and extraction Soundproof cabin Control via Siemens S7 panel Operating instructions etc. available, further technical data on request Ledpfx Amsqzmnusrohh Machine was in operation until dismantling Further technical data on request or see photos

Condition: used, Year of construction: 1979, saw blade diameter 300 mm cutting diameter 100 mm saw blade turning speeds 40 / 80 U/min capacity 90 degrees: square 90 mm capacity 90 degrees: round 100 mm total power requirement 1,5 kW Lhodpfxoy N D Nno Amrsh weight of the machine ca. 0,5 t

Condition: good (used), Year of construction: 1996, CUTTING RANGE ..... MIN 10MM TO 75MM CUTTING LENGTH ..... 5-900 SINGLE STROKE -9999 REVERSE RUN CUTTING SPEED ..... 0 - 40 MM SEC. INFINITELY VARIABLE REVERSE 135MM/S MATERIAL FEED SPEED ..... MAX. 350 MM/S Lhodpfoquuufex Amreh TENSION FORCE ..... MAIN CLAMP 10500N

Condition: excellent (used), Corner jointing machine, Pressta 4000 Shipping within the EU: approx. €350 Lhjdpfx Amel Skl Dsrjh

Condition: good (used), Year of construction: 1994, machine/vehicle number: A 3883, Offer 24310 Technical Data: - Manual saw blade feed - Workpiece clamping in machine vice - Saw blade diameter: 315 mm - 2 cutting speeds: 40 - 80 m/min - Cutting capacity at 90°: round 110 mm - Rectangular 82 x 160 mm - Square 82 x 82 mm - In mitre at 45°: round 110 mm - Rectangular 80 x 120 mm - Square 82 x 82 mm - Drive: 400 V / 1.4 / 1.9 kW - Coolant system - Required space approx. W 600 x H 1600 x D 750 mm Lhsdpfey Nlthox Amrsh - Weight approx. 300 kg

Condition: used, Year of construction: 1990, saw blade diameter 300 mm cutting diameter 90 mm turning speeds 40/80 U/min total power requirement 1,5 kW weight of the machine ca. 350 Kg dimensions of the machine ca. 0,9 x 0,8 x 1,5 m Cold circular saw - Machine light Lhjdpfx Asy Ehx Ejmroh - Coolant system

Condition: ready for operation (used), Year of construction: 2013, Circular Metal Saw manufactured in 2013. This PRESSTA EISELE Profilma 400 V features a saw blade diameter of Ø400 mm and a powerful motor with approximately 12 kW. It offers automatic material feeding and a pneumatic clamping system for efficient operation. If you are looking to get high-quality cutting capabilities, consider the PRESSTA EISELE Profilma 400 V machine we have for sale. Contact us for further details regarding this machine. • Design: Integrated material feed/loading magazine; floating feed to compensate for profile deviations • Power supply: 400 V / 50 Hz • Materials: Aluminum and non-ferrous metal profiles • Saw blade diameter: Ø400 mm • Saw blade speed: adjustable approx. 3,500–5,800 rpm • Saw movement drive: Servo motor with ball screw drive Lsdpfxjyyxxfj Amrjhh • Sawing direction: Linear feed from top to bottom • Cutting principle: Crosscut • Material feed: Automatic servo feed with repeat strokes for longer cutting lengths • Material separation: Before the saw blade retracts (no recutting) • Clamping system: Pneumatic, vertical and horizontal, on both sides of the saw blade; clamping force separately adjustable; replaceable plastic/PVC pads • Control: PLC-based; operation via control panel with display • Functions: Profile database; piece counter (incl. bundle cutting); cycle time display; diagnostics and error messages; machine status indicator • Saw blade lubrication: Minimum quantity lubrication (spray mist), programmable lubrication control • Extraction connections: Ø100 mm and Ø160 mm • Pre-installation: Prepared for external chip extraction • Motor Power: up to 22 kW (multi-speed motor: 3.5 / 11.5 / 18.5 / 22 kW) Additional equipment • External chip extraction unit (to connect to Ø100/Ø160 mm ports)

Year of construction: 1996, condition: used, Hydropneumatic operation Punching force: 50 kN Work hub: 35 mm Lhsdpfjyxpw Nsx Amreh Overhang: 110 mm Installation height: 140 mm

Condition: used, functionality: fully functional, Year of construction: 1989, machine/vehicle number: 4867, Pressta Eisele Stamping Machine HE 40 S Price: 2,000 Euros Lhodpfxoy Tizks Amrsh

Year of construction: 2009, condition: used, Saw blade diameter vertical: 600 mm Saw blade diameter (horizontal): 500 mm Lhsdpfsywtqdox Amroh Ejecting width: processing of profiles up to 300 mm at 90°, mitre tips up to 30° Profile height max. 280 mm Engagement depth: at 90° horizontal up to 185 mm / at 90° vertical up to 230 mm Material stop: swiveling 30° - 90° - 45° Material stop adjustable with detent points and display on the display Program control for automatic adjustment of the punch height, the angle, and the punching height Up to 6 programs can be stored Hydropneumatic material feed via 2-hand operation Pneumatic material clamps coolant lubrication

Year of construction: 1997, condition: excellent (used), A used, very well-maintained cold circular saw from EISELE, equipped with a 370mm circular saw blade, steplessly adjustable hydro-pneumatic feed, pneumatic material clamping, coolant system, and documentation. Speed: 17/34 rpm Cutting range: Lhjdpfx Amekfp D Teroh Round 90°/45° right/left/30° right: 130/130/105mm Square 90°/45° right/left/30° right: 120x120/100x100/90x90mm Rectangle 90°/45° right/left/30° right: 200x100/140x100/100/100mm Pneumatic connection: 7 bar Working height: 900mm Machine dimensions (W x D x H): 865x1332x2175mm Weight: 460kg Further technical data can be found in the PDF document. Technical data and dimensions: Subject to change.

Year of construction: 2009, condition: used, Drive with 3 milling motors ensures a very stable structure (steel profiles can be machined from 3 sides in a single clamping). Locking mechanism for the lift of the horizontal motors prevents profiles from being scratched when inserting and removing them. Processing of profile widths up to 300 mm possible (e.g., mailboxes) using only the vertical milling motor. Specification: - Equipped with 1 vertical and 2 horizontal milling motors - Pneumatic workpiece clamping with 2 horizontal clamping cylinders - 3 pneumatic spray nozzles - Milling area of the vertical motor (L x D): 365 x 230 mm - Milling area of the horizontal motors (L x H): 250 x 100 mm - Maximum profile height: 150 mm Ledpfx Ajy Nm Erjmrjhh - Operation via switches and 4 hand levers

Condition: used, Year of construction: 1971, functionality: fully functional, machine/vehicle number: 3229, type of input current: three-phase, rotational speed (min.): 35 rpm, rotational speed (max.): 70 rpm, input voltage: 500 V, For sale is a robust metal circular saw from the manufacturer Eisele, model VMS III. This machine is a classic cold circular saw designed for industrial use and stands out due to its solid construction and durability. Ideal for workshops, metal fabrication, or locksmith operations. Technical data: • Manufacturer: Eisele • Type: VMS III • Year of manufacture: 1971 • Machine number: 3229 Lsdpfxsy Dc I Ss Amrshh • Rotational speeds: 35 / 70 rpm • Voltage: 500 V • Motor power: approx. 1.8 to 2.6 kW • Frequency: 50 Hz • Version: Three-phase current • Equipped with a vise and mechanical feed Condition: Used condition, appropriate for its age. The machine is of heavy-duty construction and well-suited for refurbishment or immediate use. Visually with signs of wear.

Year of construction: 1970, condition: good (used), machine/vehicle number: 1258, disk of circular saw-Ø: 315 mm cutting area at 90° round: 90 mm cutting area at 90° square: 80 x 80 mm cutting speeds: 12,5 - 25 m/min forward feed speeds: hydropneumat. stufenl. regelbar cutting length: 5 - 1580 mm saw drive: 380 V, 1,8/2,5 kW space needed: 2300 x 1000 x 2800 mm Ljdpfxoh I Dvno Amrjhh weight: 940 kg

Condition: ready for operation (used), Year of construction: 1989, Saw blade Ø: 350 mm Cutting capacity: at 90° & 45°, round: 120 mm at 90°, flat: 170 x 100 mm at 45°, flat: 120 x 100 mm at 90°, square: 100 mm at 45°, square: 95 mm Lhjdjxln Ukepfx Amroh 2 saw blade speeds: 17/34 rpm Drive motor: 400 V, 2/2.6 kW Weight: 425 kg Required space: 900 x 800 x 1800 mm

Year of construction: 1969, condition: good (used), machine/vehicle number: 1130, disk of circular saw-Ø: 315 mm cutting area at 90° round: 90 mm Lhedpfxsd Rxw Sj Amrjh cutting area at 90° square: 100 x 60 mm cutting speed: 17/34 m/min engine: 380 V, 1,8/2,6 kW space needed: 1200 x 860 x 1850 mm weight: 720 kg

Year of construction: 1979, condition: good (used), machine/vehicle number: 2001, disk of circular saw-Ø: 400 mm cutting area at 90° round: 95 x 240 mm Lhsdpefnrw Sofx Amrjh cutting area in mitre at 45° round: 75 x 180 mm disk rotations: 10,5 u. 21 upm engine: 380 V, 2,6/3,2 kW space needed: 1500 x 1100 x 2150 mm weight: 630 kg

Condition: excellent (used), functionality: fully functional, Large fully hydraulic EISELE: Weight approx. 0.75 t, saw blade 440 mm Speeds: 12.5 / 25 rpm Motor power: 2.6 / 3.2 kW Hydraulic saw feed Hydraulic vice Cutting ranges: 200 x 100 mm (square tube) Mitre cut one-sided 45°. Lsdpfx Aoy Ncfusmrshh

Condition: excellent (used), Year of construction: 1995, As-new notching milling machine from a training workshop Siegfried Volz Machine Tools Lhjdpfx Amsyrh Rgjrsh Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: excellent (used), Mitre saw in excellent condition Ledpsyw Tg Eefx Amrehh

Condition: good (used), Year of construction: 1995, machine/vehicle number: 9131, Offer 26050 Technical data: - Saw blade dimensions - vertical 400 x 3.5 x 40 mm - - horizontal 400 x 3.5 x 40 mm - Notching area / notch depth vertical 135 mm - Notching area / notch depth horizontal 105 mm - Notching width at 90° up to 280 mm - Notching width at 30° up to 100 mm - Vertical saw blade manually swivellable from 90° - 30° via hand wheel - Usable as a shifting saw without horizontal saw blade - Profile stop shoulder swivellable 30° - 90° - 30° - Pneumatic material clamp - Coolant spray device - Air connection 6 bar - Drive 400 V / 2 x 2.2 kW / 2800 rpm - Space requirement approx. W 2200 x H 1600 x D 1400 mm Ljdpfeyz Tqrex Amrjhh - Weight approx. 800 kg

Year of construction: 1995, condition: good (used), machine/vehicle number: 8883, Offer 26051 Technical Specifications: - Feed of the milling unit manual - Worktable height adjustable via handwheel - Horizontal and vertical material clamping - Cutter diameter up to 300 mm - Max. milling height 150 mm - Max. milling depth 110 mm - Max. milling length 500 mm - Angle-adjustable stop left & right 20° - 90° - Spindle speed 2800 rpm - Drive 400 V 2.2 kW - Compressed air connection 6 - 8 bar - Air consumption per cycle 10 l - Pneumatic profile clamping - Spray device - Space requirement approx. W 1300 x H 1450 x D 1100 mm - Weight approx. 300 kg Lhjdpfxjyz S Tre Amreh

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, saw blade diameter: 120 mm, O F F E R We can offer you the following ex stock, subject to prior sale and errors excepted, without obligation: EISELE Vertical cold circular saw with mitre cut Type VMS II – 350 PV Year of manufacture 2010 _____ Max. saw blade diameter 350 mm Saw blade speeds 40 / 80 rpm Workpiece diameter 90 mm Swivel range of saw table 0 – 90 degrees Lhodpfoyub N Ujx Amroh Continuously adjustable pneumatic feed 0 – 10 (?) Approx. weight 350 kg Features: • Adjustable workpiece length stop, mounted on the right - Max. adjustable length: 500 mm • Pneumatic workpiece vice – clamping width 160 mm • Minimum quantity coolant system (MMKS) for saw blade • Adjustable depth stop