Used Edgebanding for sale (1,014)

Condition: used, Year of construction: 2016, Industrial automatic edge bander SOLUTION XD MAIN FEATURES "E-TOUCH" CONTROL WITH AUTOMATIC PROGRAMMING: ONE "TOUCH" IS ENOUGH TO OPERATE THE MACHINE. STANDARD PRESSURE DEVICE WITH DRIVE BELT FOR OPTIMAL PANEL GUIDANCE. BANDING OF ROLLED MATERIAL, STRIPED EDGES, AND SOLID WOOD EDGES. GENERAL FEATURES: Single-sided edge bander in left-hand design for gluing rolled materials and strip edges using all conventional hot melt adhesives. The base frame consists of a sturdy, highly rigid steel welded stand, which provides optimal support for the processing units. The upper pressure consists of a thick-walled steel profile and a double trapezoidal drive belt that is automatically positioned to the panel thickness. Height adjustment with display on the top pressure and on the operator interface. Manual workpiece feeding system with a generously dimensioned work line and enlarged support surface facilitates the feeding of large workpieces. Adjustable infeed ruler for two positions with automatic selection for processing with or without pre-milling. Working units are attached to the pressure beam and mechanically connected to ensure automatic adjustment when changing panel thickness. Lower working units are attached to the machine frame or to the longitudinal beam for precise reference in relation to the panel. All high-frequency motors are powered by frequency converters (inverters). The unit is equipped with its own inverter for optimal flexibility and improved production times. The cleaning hood for all units positioned after the gluing unit is equipped with polycarbonate windows to ensure a good overview of the units during processing. The interior lighting of the cleaning hood is lined with sound-absorbing material for lower noise emissions during processing. The spacers on the infeed ruler allow the machine to be fed at the correct distance. The distance is automatically adjusted to the selected feed speed. The exhaust nozzles are arranged on the pivoting control panel, positioned in the infeed area, and are adjustable for ergonomic electrical installation in compliance with current regulations. The electrical component is housed in a metal casing, fixed to the machine frame and equipped with doors for easy access in case of any problems. The standard voltage is 400 V EU 50 Hz (with neutral). The material is fed by a feed chain with 80 mm wide chain plates made of rubberized nylon for optimal guidance and a high chain tension. The chain slides on two guides made of hardened and ground steel, one round and one flat, to ensure linear feed and prevent lateral misalignment. Automatic chain lubrication. The amount of lubricating oil is controlled by the control system according to the panels being processed. The storage roller conveyor is external and positioned along the entire length of the machine; it consists of an opening system that can be extended up to 650 mm (for panels with a maximum width of 1200 mm). E-TOUCHPC control system for quick and easy execution of the main functions which includes:– Editing of programs in Just in Time mode– Possibility of management via parts lists– Possibility of management by Tjdpfoxy Tm Ijx Ahusf

Condition: used, Year of construction: 2017, machine/vehicle number: MR005128, Lightly used edge banding machine with gluing unit, end trimming unit, and flush trimming unit. Suitable for edge banding up to 2 mm thickness and panels up to 50 mm thick. Technical specifications: - Minimum edge band thickness: 0.4 mm - Maximum edge band thickness: 2 mm - Minimum panel thickness: 12 mm - Maximum panel thickness: 50 mm - Minimum panel length: 180 mm - Minimum panel width: 65 mm - Feed speed: 6 m/min - Glue reservoir capacity: 0.5 kg - Pre-milling unit: No - End trimming unit: Guillotine knife - Serial number: KK /138932 Todpfx Ahsxxx Dieuof

Condition: good (used), Year of construction: 2010, 0,4 - 5 mm Tedsxylpuspfx Ahuef Workingpiece thickness from to 8 - 60 mm Total length 2814 mm Feed speed 11 m/min.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: M/53056, total length: 9,800 mm, overall weight: 4,500 kg, compressed air connection: 6 bar, input voltage: 400 V, input frequency: 50 Hz, Single-sided edge banding machine in right-hand configuration - with jointing unit - gluing unit - double end cutting unit - flush trimming, chamfering, and radius milling unit - corner rounding unit - scraper and edge buffing unit with high-performance automation - pressure zone with one driven roller and six follow-up rollers - automatic edge thickness adjustment for all units - automated chamfer thickness adjustment of the top pressure to panel thickness Tedoxy Sizspfx Ahuef - pneumatic engagement/disengagement of all processing units with monitoring - Machine in CE-compliant design with complete encapsulation of processing zones by high-quality noise protection hoods. Machine length: 9,800 mm Machine weight: 4,500 kg Gluing unit - for hot-melt adhesive granules - with quick heating tank, preheating time: 6 minutes - electronic temperature control - adhesive application roller (no adjustment required for different material heights) - operates in both co- and counter-rotation, automatically activated via program control Edge thickness: 0.2 - 20 mm Workpiece dimensions: Minimum width: 60 mm Minimum height: 8 mm Maximum height: 60 mm Minimum length: 160 mm for strip edges / 60 mm for continuous roll edges / 150 mm with double end cutting unit Workpiece transport - heavy-duty chain conveyor with precision sliding guides for chain support plates with flat and round guide rails to ensure positive workpiece transport - feed speed: 12 - 20 m/min, adjustable via electronic frequency inverter from the central control panel, values can be saved in work programs - motor power: 5.5 kW Panel thickness adjustment Motorized adjustment of double roller top pressure, preselection via the central control panel, values can be saved in work programs Edge thickness adjustment - automatic positioning of all edge thickness-related units including the pressure zone, preselection via the central control panel, values can be saved in work programs Machine control - central control panel - PLC and line control for contactless control of the processing units Central control panel - for flexible and easy operation of the edge banding machine, with a specifically developed user interface for clear and rapid access to all important machine and unit statuses - intuitive menu navigation via two-line text display, supported by clearly arranged symbols with two-color LED status indicators PLC - high-performance PLC to industrial standards for fast and efficient interaction with the machine and for controlling all functional groups and line control Line control - high-resolution line control of all processing units with +/- 1mm accuracy over the full machine length - complete access via the control panel for all program-controlled processing units - values can be saved in various work programs EFU - electronic frequency inverter Connections Electrical: 3 x 400 V, 50 Hz, rated current 42 A, protection: 50 ampere, supply: 5-core, 5 x 10 mm², control voltage: 24 V Extraction: 1 x 120 mm, 1 x 160 mm, 1 x 120 mm, extraction air velocity: min. 20 m/sec, required capacity: approx. 65 m³/min Compressed air: 6 bar, 1/4" - consumption approx. 300 l/min, required minimum pressure: 4.5 bar, all workpiece blow-off lines are line-controlled.

Condition: excellent (used), Year of construction: 2019, BIESSE AKRON 1440 Airforce system (return system is not included) - Year 2019 - good condition - NC motors, all adjustable from PC control - Premilling • top pressure with belt instead of rollers • Auto infeed edge • Riepe release nebulizer • Glue pot • Air force system • Scissors • Pressure zone 3 rollers • Riepe antistatic nebulizer • Double saw unit 0-15° • Riepe lubricant nebulizer for delicate edges • Double motor corner rounding unit • Riepe cleaning nebulizer Tjdpsv A H Ubefx Ahusf • Edge scraping unit • Glue scraping

Condition: excellent (used), Year of construction: 2012, Brand KDF110 Optimat Ambition - only 1150 hours Brand: Brandt Model: KDF 110 Year of manufacture: 2012 M-Nr.: 0-261-20-6960 Control system: Easy Control 10+ contactless line control, feed-regulated with start-stop optical-indicative sensors Display: LCD, 4 x 20 characters, 4 program memory slots Configuration: Chain conveyor feed: Standard equipment with central lubrication for the transport chain. Top pressure rollers / product guidance: Central control, 2 roller tracks Jointing milling unit: 2 x 0.75 kW, 200 Hz including jointing cutter set in DIA version with manual positioning via Siko counter, max. 3 mm removal and max. 40 mm workpiece thickness Tedpfx Ahsxvirfeusf Gluing unit: A3 gluing station for hotmelt glue with option for PU application, magazine, pressure zone with electro-pneumatic 2-point positioning via central control unit Pressure zone: First roller driven and 2 free-running rollers for excellent and consistent compression End trimming unit: 0.18 kW, 12,000 rpm Profile milling unit: 2 x 0.27 kW, 200 Hz, 12,000 rpm, counterrotation, 3-position adjustment chamfer/radius (R2), overhang and straight, max. 3 mm edge thickness with Siko counter Profile scraper: Max. 3 mm edge thickness Surface scraper: Reversible blade Chain width: 80 mm Edge material in rolls: 0.4 – 3 mm End trimming device: 0.4 – 3.0 mm Edge height: max. workpiece height + 5 mm Workpiece thickness: 8 – 40 mm Minimum workpiece width: • For workpiece thickness 8–22 mm: 70 mm • For workpiece thickness 23–40 mm: 120 mm (Depending on workpiece length) Workpiece overhang: 38 mm Edge cross-section: max. for PVC 135 mm² (max. 6 mm) Roll diameter: max. 830 mm Feed speed: 8 m/min Working height: 950 mm Pneumatic connection: min. 6 bar Overall length: 3,672 mm Location: ex stock 54634 Bitburg - Immediately available -

Condition: used, Year of construction: 2018, Edge banding machine AKV 3006 DK - F with jointing milling unit including DIA - tools Jointing thickness up to 40 mm Workpiece thickness up to 3 mm Combined milling station radius R 2.5 mm Technical description With application of hot glue to the workpiece for edge material up to 3 mm Workpiece thickness 60 mm without jointing unit, 40 mm with jointing unit Maintenance-free, coated glue pot HF - cross-cut station (16,000 rpm) for front and rear edge overhang HF - milling station (16,000 rpm) with interchangeable cutter (combination version) and fine adjustment from the operator side Free slots for additional processing units (system Hebrock), feed approx. 10 m/min Cutting depth adjustment of the cross-cut saw Signal lamp for workpiece sequence, robust chain drive, ergonomically arranged control panel Double-roller top pressure beam Aggregate viewing window from machine rear and operator side PLC control including touchscreen Technical data: - Feed speed 10 m/min - Panel thickness 8 - 40 mm - Weight: depending on equipment approx. 1550 kg - Dimensions (L x W x H) 5250 x 1445 x 1600 mm 2-point pneumatic cutter adjustment 1 unit Switching between radius - flush/bevel for the combined milling stations, switching between bevel or flush is manual by flipping the stop flap in the machine Buffing station (polishing) 1 unit Corner rounding cutter 1 unit incl. combination tool and pneumatic bevel/radius adjustment, max workpiece thickness 40 mm Minimum workpiece length 300 mm Radius R 2.0 mm Radius scraper 1 unit incl. pneumatic lift device, radius R 2.0 mm Surface scraper 1 unit with pneumatic engagement control Tsdpfx Ahoxfh Tmoujf Glue station change system incl. 2nd glue pot and glue outlet downwards 1 unit for quick color change Grooving saw unit horizontal into the edge 1 unit incl. pneumatic lift device and grooving tool Separate extraction of jointing unit 1 unit directly attached to jointing unit vertically upwards d=80mm for optimal suction performance from AKV 3005 DK-F urgently recommended Ball bearing for corner rounding cutter 24.1mm 1 unit Ball bearing for corner rounding cutter 24.2mm 1 unit Interchangeable motor 0.37 kW for corner rounding cutter 1 unit with quick-change device incl. radius cutter R 1 Interchangeable spindles 1 set = 2 pieces 1 unit 1 set of quick-change motors for longitudinal processing top and bottom incl. tool R 1 Compressed air requirement: 100 - 150 l/hour. Storage location: Nattheim

Condition: used, Year of construction: 2007, machine/vehicle number: Werksüberarbeitungsnummer: WÜA1363DK-F7560, Used Machine GM020.0068 AKV 3003 DK - F Year of manufacture: 2007 Tsdpfsw Nih Isx Ahujf Specification: 3 mm 1st milling station: Combination Surface pull scraper with extraction Chassis Pneumatic milling adjustment Limit switch lever, 7.5° inclination

Condition: used, functionality: unexamined, Ferwood code: RU0011644 – Manufacturer code: K6343K0945 – Condition: Used – Functionality: Untested – If interested, we offer refurbishment service, please contact us. Todpewtm A Sefx Ahujf

Condition: used, Year of construction: 2012, Basic machine Olimpic K 800 "T-ERL" (47) 1 pc. BASIC EQUIPMENT: - Ribbed steel machine frame with tubular reinforcements for optimal work unit support - Pivoting control panel - Support roller conveyor with ball bushing guides along the entire machine length - Protective and sound-absorbing hood with separate doors between the gluing and finishing units - Extractor nozzles located on the sound-absorbing hood - Electrical system with lockable main switch - Emergency/stop buttons at the inlet and outlet - Inverter for electric spindles. PLATE FEED SYSTEM - Feed chain with rubber glide shoes, mounted on a 1 1/4-inch industrial chain with a high friction coefficient - The chain slides on two guides made of hardened and ground steel, one round and one flat, to guarantee straight feed and protect against lateral misalignment. --- Automatic central lubrication of the feed chain - The upper pressure beam is made of thick-walled steel construction. Complete with double rows of bearing rollers and protective device for the printing rollers - manual lifting of the printing unit with automatic working unit positioning when changing the plate thickness - mech. Digital display for checking the selected panel thickness. ORION 100 CONTROL SYSTEM. Control device complete with PLC, allows fast, easy, and error-free execution of custom processing programs (max. 60 programs). Manages the pneumatic positioning of the units, if present on the machine. (The control system does not include pneumatic positioning). - Alphanumeric keyboard and display - Function keys for quick control of the processing units - Ambient temperature range from 0 to +45° C. MAIN FUNCTIONS - Control of the processing units and automatic activation of the motors - Control and regulation of the glue pot temperature - Selection of longitudinal and transverse processing without program change - Simple and guided diagnostics for easy troubleshooting - Statistics on absolute data and individual processing: number of pieces, edge consumption, total chain feed distance - Unit of measurement selectable in mm or inches. Technical data OLIMPIC K800 T-ER L Edge thickness: 0.4 to 8 mm Max. gluing thickness of the roll edge: 3 mmFeed speed: 12/18 m/minWorking height: 8 to 60 mmMax. dimensions of the edge cut: 135 mm²Turntable diameter: 780 mmMax. oversize compared to the panel thickness: 4 (2+2) mmMin. panel width (with 210 mm min. length): 55 mmMin. panel length (with 100 mm min. width) - with strip or roll edges max. 3 mm: 140 mm - with solid wood edges: 200 mmMin. distance between consecutive panels at 11 (16) m/min: 750 (850) Standard equipment - Pre-milling unit in the infeed RT-E- Gluing station VC-800- Trimming unit KSEL- Flush trimming unit, tiltable RI/800- Rounding unit ROUND K- Scraper unit RAS-V- ½ free space for surface scraper- 1 S free space for surface scraper or Universal milling or buffing unit - 1 free space for air nozzle unit. European safety regulations (C.E. mark). 1 unit. Voltage 400 EU. 1 unit. Frequency 50 Hz. 1 unit. "Autoset" for ER2, T-ERS, and T-ERL models. 1 unit. Allows all necessary adjustments to be made from the control panel for each machining change. Includes: - time-controlled pressure unit - pneumatic and independent pivoting of the mitre saw blades (front/rear) - pneumatic remote adjustment for the RI/800 flush trimming unit. Tsdpfsxq Apgex Ahuef

Condition: used, Year of construction: 2018, machine/vehicle number: Werksüberarbeitungsnummer: WÜA3581DK-F21600, Used machine GM020.0050 AKV 3005 DK - F Year of manufacture: 2018 Specification: 8 mm 1st milling station: Combination Pneumatic 3-point adjustment Cleaning station Corner rounding cutter Radius scraper station incl. lift Surface scraper PLC control incl. touchscreen Interchangeable tanks Nesting Glue discharge 60 mm workpiece thickness (joining and corner milling) Spraying device for panels Edge protection spraying Short workpieces Todpfx Aow Nif Hehujf

Condition: used, functionality: fully functional, Ferwood Code: RU0011405 - Condition: Used - Functionality: Fully functional - Compatible Machine: HOMAG KAL-KFL-KAR EDGEBANDING MACHINE - BIESSE STREAM - SCM STEFANI - HOLZHER - KDT - IMA - If interested we offer an overhaul service, contact us. Todpfxev I Ah Ue Ahujf

Condition: used, Year of construction: 2011, Pneumatic milling adjustment (Straight/Radius) Combination milling station R=2 Corner rounding cutter R=2 to 40 mm Jointing cutter up to 40 mm Flat scraper Profile scraper R=2 Short workpieces PLC control with Pro Face touchscreen Nesting Cooling/antistatic spray - airtronic Protective spraying Kante Riepe incl. interchangeable tank Workpiece thickness 8 - 60 mm Mechanical edge clamping Extraction nozzle: 140 mm Dimensions: Length with extension: 4984 mm Depth with roller table: 1425 mm Max. height: 1618 mm Worktable height: 888 mm Weight: 1400 kg Storage location: Nattheim Tjdpfxoxyiils Ahusf

Condition: used, Year of construction: 2005, machine/vehicle number: Werksüberarbeitungsnummer: WÜA920DK-F12960, Used machine GM020.0029 Year of manufacture: 2005 AKV 3005 DK-F 8 mm version 1st milling station: Combination Cleaning station Tjdpjw In R Ejfx Ahusf Corner rounding cutter Jointing cutter Surface scraper with extraction Profile scraper Chassis Pneumatic milling adjustment SPS control Preparation for interchangeable tanks

Condition: used, functionality: unexamined, Ferwood Code: RU0006957 - Manufacturer Code: 4-008-39-1127 - Condition: Used - Functionality: Not tested - Compatible Machine: HOMAG EDGEBANDER - If interested we offer a revision service, contact us. Todpsv Efqtjfx Ahusf

Condition: used, Storage location: Sonnefeld Tsdpfx Ahjway Dcouof

Condition: used, functionality: fully functional, Ferwood Code: RU0011132 - Manufacturer Code: - Condition: Used - Functionality: Fully functional - Compatible Machine: HOMAG KAL 210/310/370 EDGEBANDER - If interested we offer a revision service, contact us. Tjdpev I Acfsfx Ahuef

Condition: used, Year of construction: 1994, Edge thickness 0.3 - 20 mm, edgeband height: max. 66 mm, edgeband length: min. 200 mm, workpiece width min. 60 mm, workpiece length min. 140 mm, workpiece thickness: min. 6 mm, max. 60 mm, feed speed 8 or 16 m/min - Edgebanding with Ultra - Granupress - End trimming with 2 saws, 0 - 15° tiltable - Milling, radius / flush - Corner copying - Scraper - Pneumatic buffing Location: Nattheim Todpfx Aevvkdtjhusf

Condition: used, functionality: unexamined, Ferwood Code: RU0009528 - Manufacturer Code: 4-008-39-1112 - Condition: Used - Functionality: Not tested - Compatible Machine: HOMAG EDGEBANDER - If interested we offer a revision service, contact us. Tsdpfxsv In Ads Ahuof

Condition: used, Year of construction: 1996, Edge thickness: 0.4 - 12 mm Roll edge: 3 x 45 mm or 0.8 - 60 mm Minimum workpiece width: 65 mm Minimum workpiece length: 160 mm Workpiece thickness: 10 - 55 mm Feed rate: 13 m/min Pre-milling (joining) Glue pot Quickmelt Gluing unit Trimming Flush trimming Chamfering Radius trimming Corner rounding Flat scraper Buffing unit Machine dimensions: 7450 x 1220 x 2400 mm Weight: 3000 kg Storage location: Nattheim Todpfxovvkd To Ahuof

Condition: used, functionality: unexamined, Ferwood Code: RU0001357 - Manufacturer Code: 4-008-39-1113 - Condition: Used - Functionality: Not tested - Compatible Machine: HOMAG EDGEBANDER - If interested we offer a revision service, contact us. Tsdpjv Du Nvjfx Ahujf

Condition: used, Year of construction: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4-30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6-45/60 mm (depending on equipment) Edge types: Rolls and strips Feed speeds: Continuous feed from 12-30 m/min (depending on equipment) With adjustable infeed level in the magazine area (max. adjustment range 30 mm) With height-adjustable magazine plate for changing the lower edge overhang With large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm With transport chain including automatic central lubrication With motor-driven, position-controlled bridge height adjustment With pneumatic locking roller for the shortest workpiece sequence With extendable workpiece support (extension width 1600 mm) With space-saving, pneumatically controlled sliding hoods over the entire machine (Deviations for individual units are possible) with motorized infeed guide with injection oiler for lubricating all joints and bolts (including operating hours counter) with central connection for extraction (2x Ø 200 mm) with integrated chip collection box at the end of the machine (when radius scraper unit is installed) PPC 231 control system - Power PC for efficient setup and changeover - 15" SVGA screen with touchscreen - 128 MB CF memory card - USB connector on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - all information in plain text and/or graphics - Rotatable and pivoting control panel at eye level - Dust-proof membrane keyboard with softkeys (pushbuttons) - LED display for unit preselection - Program list with program names and numbers - Extensive program memory - Individual selection of the units with the functions as basic setting options for setpoints, route points and tool corrections as well as the fixed route points - Centralized and clear setup processes for units and their axis settings via fine adjustment (depending on the equipment) - Interval display for the shortest workpiece distance - Integrated path control - Path points are controlled generally or program-specifically - Clear and complete recording of all operating data - Service messages in plain text - Diagnostic system - including integrated synchronous bus system for high precision in unit control - Individual administration for up to ten users, including password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASIC MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the basic machine Spraying device 1856 for the inlet and outlet area For the inlet area: Electronically controlled release agent sprayer with Riepe-LPZ/II release agent For the outlet area: Electronically controlled cleaning agent sprayer with Riepe-LP163/93 cleaning agent (only in conjunction with pre-milling unit 1961 and surface scraper 1964) Joint milling unit Joint milling station 1803 (2x 2.6 kW, 200 Hz, 12000 min-1) With two plunge-controlled milling units 1 unit in up-cutting direction 1 unit in down-cutting direction Plunge path 5 mm With static frequency converter 200 Hz Without milling tool With ProLock screw-in clamp for fast tool changes Tool for 1803 (workpiece height up to 60 mm) Diamond milling cutter PRO UT 2 pieces (front and rear) including protective covers Ø 100-63 - Ø 30 mm, Z = 3 + 3 + 3, 1x left-hand rotation, 1x right-hand rotation Noise-reduced milling cutter with integrated chip guide DFC technology (Leitz syst Tjdpfxovvkfdo Ahuof

Condition: used, functionality: unexamined, Ferwood Code: RU0002552 - Manufacturer Code: 4-008-39-1708 - Condition: Used - Functionality: Not tested - Compatible Machine: HOMAG EDGEBANDER - If interested we offer a revision service, contact us. Tedpjv Dvg Ajfx Ahusf

Condition: used, Year of construction: 2001, Edge thickness 0.2 - 6 mm Workpiece dimensions Width min. 70 mm Height min. / max. 8 / 42 mm Length min. 150 mm (strip edges) Feed speed: 12 m/min Glue application roller Machine dimensions L x W x H = 3500 x 900 - 1300 x 1250 mm Weight: approx. 1130 kg Power consumption: approx. 6.0 kW, 400 V, 50 Hz Equipment: - Double top pressure with manual height adjustment - Automatic magazine for roll edges up to 800 mm DM - Rapid heating tank with application roller in synchronous and counter-rotating direction - Pneumatic adjustment and resetting of all work units - Pneumatic cross-cutting shears for strip edges up to 3 mm - Manually adjustable infeed ruler - Double cross-cut saw 2 HF motors 0.2 kW, 12,000 n 2 automatic Positions = 0 + 3 degrees - Milling/flush trimming unit with two HF motors 0.43 kW, 12,000 n. Two-sided scanning with two HF indexable cutter heads. Radius scraper, automatically controlled. Flat scraper, automatically controlled. Storage location: Nattheim Tjdpfxsvvkfqo Ahusf

Condition: used, functionality: unexamined, Ferwood Code: RU0011459 - Manufacturer Code: DTS6201 - Condition: Used - Functionality: Not tested - Compatible Machine: CNC - IMA EDGEBANDER - HOMAG - WEEKE - If interested we offer a revision service, contact us. Todpfx Ajv I A Dvohuof