Used Edge Banding for sale (6,497)

Condition: used, Year of construction: 2005, - Automatic infeed table - KFA unit - Return system Used single-sided edge banding machine Manufacturer: IMA Type: Combima Systems / I/R751220/R3 1 single-sided combination machine for trimming, edge gluing and edge finishing of panel-shaped workpieces made of wood and/or wood-based materials. - Automatic infeed table - KFA unit - Return system Dodpezuyplsfx Akrowb Technical data "Workpiece": Workpiece length - min.: 238 mm - max.: 2350 mm Workpiece width - min.: 142 mm - max.: 800 mm Workpiece thickness: - min.: 8 - 40 mm Technical data "Strip" (only for longitudinal processing): Roll material: - Paper edge bands & plastic edge bands: 0.3 - 3.0 mm - Veneer edge bands: 0.5 - 3.0 mm Edge height: - min.: 14 mm - max.: 45 mm Technical data "Machine": Variable workpiece overhang from the chain conveyor (including edge with edge thickness 0.3-3 mm): - min.: 40 mm - max.: 80 mm - PC control ICOS open - Feed speed v=5-25 m/min, frequency-controlled drive - Inclined roller table as infeed section NC infeed system for front and carcass parts - for length and width-independent automatic workpiece feed in single-sided edge processing machines. Only for the production of strip material in the 2nd pass - An additional stop rail, adjustable via NC axis. Double milling unit 08.376: - Controllable - Motor 1 operating in the same direction and motor 2 operating in the opposite direction - Reserve space on the unit carrier for a double trimming unit with electrical pre-installation for 2 x 6.6 kW. - Heater 300 lg, 2x1.5 kW, for preheating the workpiece edge. - Gluing unit 04.1570 system for straight edges and adhesive application to the workpiece. The edge thickness depends on the magazine used and is max. 3 mm. - Adhesive application for workpiece thickness max. 50 mm - 2 pre-melting tanks for PU adhesive - 12-position edge magazine for roll material 0.3-3 mm thick. (8 slots up to 3 mm, 4 slots up to 1.3 mm) Vertical roll holder for 12 rolls: - max. roll diameter 850 mm - max. edge height 45 mm - Trimming unit 08.42, for 2 motors mounted on the upper pressure bar - Pre-milling and milling unit with height sensor - with 1 motor 1000 W - Multi-profile / chamfer unit, with 2 motors 1000 W - Contour milling unit KFA 30 - Multi-profile drawing blade unit - Flat drawing blade 08.517 - Copy edging unit 08.604 - Edging unit 08.617-2 - Double milling stand 75.184, 1050 mm high, both stand sides can be used - Milling / profile milling / grooving unit 75.34 with 1 motor, without tool, 100 Hz, 6000 rpm - Milling / profile milling / grooving unit 75.34 with 1 motor, without tool, 100 Hz, 600 rpm - Motor spindle for the use of the Hydro-Format tool system - Return system, manufacturer Meinert Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: excellent (used), FULL LINE of Double-side Sizing-Milling & Edge Banding, max working width mm 2500, with automatic handling. Composed of the following machines: X04004A) Double Loader "BARGSTEDT" TBH 500/D/30/14 with central motorised roller conveyor X04004B) Turning station (90°) lengthwise to crosswise "HOMAG" Mod. TDR31/25/12 X04004C) Splitter "HOMAG" Mod. FPR620/04/15/PS/LQ to split in two parts the unique panel Dwodolikvhjpfx Akreb X04004D) Seperation Station "BARGSTEDT" X04004E) Double-side Sizing & Edge Banding machine "HOMAG" Mod. KFR 620 / 19 / QA / 25 X04004F) 1° Automatic (through-feed) Multi Borer "WEEKE" Mod. BST 500 D X04004G) 2° Automatic (through-feed) Multi Borer "WEEKE" Mod. BST 500 D X04004H) Turning station (90°) crosswise to lengthwise "HOMAG" Mod. TDR 51/25/12 X04004I) Motorized belt transfer "HOMAG" TR 10/70/12 X04004L) Splitter "HOMAG" Mod. FPR620/04/15/PS/LQ to split in two parts the unique panel X04004M) Double Stacker "BARGSTEDT" Mod. TSP 420/40/30/12 BA with central motorised roller conveyor

Condition: new, CATALOG NUMBER HL001 - New machine, in stock – Pre-milling unit – Radial scraper + polishers TECHNICAL DATA - Panel thickness: 45mm - Edge thickness: 0.4 mm – 3 mm - Min panel width: 90mm - Min panel length: 90mm - Feed speed: 7m/min - Pre-milling: 9000 rpm - Top/bottom: 10500 rpm - Front/back: 8800 rpm - Polishing: 2800 rpm - Main motor: 6kW - Feed power: 0.75kW - Pre-milling power: 1.5kW - Glue spindle power: 0.25kW - Top-bottom milling power: 0.18kW - Top milling power: 0.55kW - Top polishing motor: 3-phase 0.12 kW, 1-phase 0.18 kW - Bottom polishing motor: 3-phase 0.12 kW, 1-phase 0.18 kW - Working table height: 856mm, extended support width: 560mm - Extraction connection: 3x100mm - Dimensions (L/W/H): 3200/1200/1200mm, weight: 660kg Dodpfszx Rq Isx Akrjwb Net price: 49,900 PLN Net price: 11,880 EUR based on 4.2 EUR exchange rate (Prices may change with significant fluctuations)

Condition: as good as new (ex-display), Edge banding machine as demo unit 5 units (aggregates): Joint trimming unit incl. AIGNER diamond joint cutter heads, with Konstantin DIA interchangeable knife system and controlled edge air-blast nozzle behind the second joint cutter head. End trimming unit: 1 motor, 2 saw blades Radius milling unit with Easy Set adjustment system Radius scraper unit, retractable, incl. - Extraction device with chip collection box for scraper shavings - with Easy Set adjustment system - 2 digital readouts Dedpfx Asw Rcmyekrewb Flat scraper unit with 4-way usable scraper blades. The unit is retractable. General features: - High-gloss package: tracing rollers for the radius milling unit, radius scraper unit, and flat scraper unit - Large viewing, noise, and safety enclosure for all processing units and the glue pot - Teflon-coated glue pot with energy-saving mode in standby - Glue application roller with feed screw for long and tall workpieces - Pressure zone with motor-driven 1st steel pressure roller + 1 rubber roller - Reel shear for edging 44 x 2 mm Technical data: Edge thickness: 0.4 – 2 mm Min. panel width: 120 mm Min. panel length: 90 mm Min. panel thickness: 10 mm Max. panel thickness: 40 mm Feed speed: 7 m/min Extraction connections: 3 x 150 mm Connection: 8 kW - 400 V / pneumatic: 6 bar

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 + in stips / lippings (max mm 1) Panels thickness (min/max) mm 8 / 45 (60) Djdpfxsxggzlj Akrewb Working width (min/max) mm 236 (266) / 3300 Numerical Control / Software ICOS Open (Windows base) Adjustable feeding speed (m/min ) 10 - 50 (Master & Slave) Safety and sound-proof enclosures/cabins SIZING PART (for each side): Anti-chipping Milling Unit 75.186 (1 x Kw 4,4) Hogging Units (2 x Kw 6,6) Max 35 m/min Milling unit (Joint Trimmer) 75.186 (1 x Kw 4,4) EDGE-BANDING PART (for each side): Glueing Unit (P.U.R. Glue + Quick Melt system) VTG 3-24 + 283.203 Pressure zone + Edge coils supporting unit (No. 24 reels) Snipping (end-cutting) unit 08.42 / 30 / B (2 x Kw 0,66) 30 m/min (0°-25°) Rough/Fine Trimming unit 08.055 (2 x Kw 1) 0°-30° (30 m/min) Multi Function Unit (Profile contour Trimming unit) MFA 08.342 (2 x Kw 0,66) SERVO - 20m/min OPTIONAL: KFA 30 Profile Scraping unit 08.519 Glue scraping unit 08.521 Buffing unit 08.604 (Kw 0,25 x 4) No. 2 Grooving units 08.190 (1 x Left-hand + 1 x Right-hand) (Kw 4,5 x 2) swivelling 90°/180°/270°

Condition: excellent (used), Year of construction: 2019, Edgebanding machine Manufacturer: Felder Model: Tempora 60.06, F600 Year of manufacture: 2019 Fully automatic operation from the control panel. Jointing unit: Yes End trimming unit: Yes Radius milling unit: Yes Dsdpoxix Hxofx Akrjwb Radius scraper: Yes

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Panels thickness (min/max) mm 8 / 45 (60) Working width (min/max) mm 236 / 1300 Numerical Control / Software ICOS Open (Windows base) Without Transmission bar (Master & Slave system) Adjustable feeding speed (m/min ) 10 - 50 Safety and sound-proof enclosures/cabins "Hopper Feeder" (panels fall directly onto the feeding chains) Distance (center-axes) of the Disappearing Dogs (mm) 270 SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Anti-chipping Milling Unit 75.186 (1 x Kw 4,4) Hogging Units (2 x Kw 6,6) Free space Dwsdpfeum Untjx Akreb EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) 04.1570 + 283.201 Pressure zone Edge coils supporting unit (No. of reels) 6 Snipping (end-cutting) unit 08.42 (2 x Kw 0,66) 30 m/min (0°-25°) Fine Trimming unit 08.055 (2 x Kw 0,66) 30 m/min Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.617-2 (2 x Kw 0,18) Free space

Condition: excellent (used), Double side - Stand-alone Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0.3 / 3 Edges thickness in stips / lippings mm 1,3 Panels thickness (min/max) mm 8 / 40 Working width (min/max) mm 266 / 2400 (option 3000) Distance (center-axes) of the Disappearing Dogs (mm) 540 (prepared for 270 mm) Numerical Control ICOS OPEN Feeding speed (adjustable) max. 60 m/min Without Transmission bar (Master & Slave system) SIZING PART (for each side): Dedeu Ekbnepfx Akrewb Spraying unit (Anti-sticking liquid) Pre-milling Unit (vertical joint trimmers) 08.376 (KW 4.5 x2) Free space EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt Glue) 283.205 Band Pressure zone. Edge coils supporting unit (No. 2 reels) Servo-drive Snipping (end-cutting) unit 08.42 (KW 0.2 x 2) 0°-25° (max. working speed 50 m/min) Fine Trimming unit 08.055 (KW 0,66 x 2) 0°-30° Multi Function Unit (Profile contour Trimming unit) 08.342 (KW 0.66 x 2) Spraying Unit (for polishing liquid) Free space (for possible addition of a scraper) Buffing unit 08.617 (Kw 0.18 x 2)

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, Equipment: CE marking, IMA BIMA 410 V CNC WORKING CENTRE FOR BORING + ROUTING + EDGE BANDING • Industrial machine with heavy-duty structure • Working area: X:4000 mm Y:1200 mm Z: 100 mm • Travel speed: X:100 m/min Y:80 m/min Z: 25 m/min • 2 Working areas • 8 movable work tables to support the panels. SCHMALZ system • 23 SCHMALZ suction cups with vacuum system for the locking of the working piece • 4 loading device through pneumatic bars assembled on the work tables that lift the pieces • 1 SIEMENS vacuum pump ROUTING UNIT: • 10 HP. Refrigerated router head • Automatic change of the tool • Tool holders: HSK F-63 • C AXIS that allows to turn and 360° angle drive heads with rotation regulation in automatic by numerical control Dwodpjzc E A Iefx Akrsb • 0 to 20.000 rpm • Tool magazine 12 positions MULTI-BORING UNIT: • 7 independent spindles for vertical boring in X direction • 5 independent spindles for vertical boring in Y direction • High revolution speed: 9.000 rpm EDGE BANDING UNIT: • Automatic device to apply the edge into straight profiles of shaped panels • Applicable banding material in coils: thin edge and PVC up to 3 mm • Independent unit to edge band shaped panels. It's installed on the main frame of the machine - hot-melt glue pot and premelter - spreading roller to regulate the quantity of apllied glue - edge pression roller • Lamp zone to pre-heat the side of the panel • Multiple magazine for edge coils with 2 positions, to automatically change the edge type • Top and bottom edge trimming head-unit • Top and bottom edge scraping head-unit CONTROL OF THE MACHINE: • IMATRONIC • Software IMAWOP • Command board installed on a separated electrical cabinet to control the machine PROTECTION ENCLOSURE OF THE WORKING UNITS PROTECTION FENCES SECURITY CARPETS SECURITY NORME CE MARK

Condition: new, Year of construction: 2023, New machine Year of manufacture: 2023 Single-sided automatic edge banding machine with pre-milling unit, hot-melt adhesive application on straight workpieces (EVA/PUR glue pot with emptying function optional), HF cross-cut saw station, HF milling unit, corner copying unit, chain feed, double roller upper pressure, extendable workpiece support rail, signal lamp for workpiece tracking and integrated length control for contactless operation of processing functions. Suitable for ABS, PVC, melamine, and solid wood veneer edging coils, as well as fixed lengths from 0.4–3.0 / 6.0 mm and workpiece heights from 8–60 mm. Feed speed: 10.0 m/min; 8.0 m/min with corner copying. ● 3 free slots for finishing units ● 10" color touch screen. Machine length: 4030 mm Workpiece thickness: 8–60 mm Min. workpiece width: approx. 75 mm Min. workpiece length: approx. 120 mm (min. approx. 200 mm with corner copying) Edge thickness: 0.4–3.0 mm Pre-milling unit chip removal: 0–2.0 mm, stepless adjustment Total connected load: 7.5 kW – 400 V Feed speed: 10 m/min; 8 m/min Pneumatic connection: 6 bar Net weight: 1050 kg Options: Surcharge for radius scraper unit with air nozzle + extraction Surcharge for surface scraper unit + extraction Surcharge for buffing unit EVA/PUR glue pot with emptying function Surcharge for diamond tools, height = 65 mm for pre-milling unit Riepe spray system (anti-adhesive) at the pre-milling unit Dwodsw I U Drspfx Akreb Riepe spray system (cleaning spray before buffing unit) Pipe system with 90° bend + manual slide valve, installed on machine, D=200 mm Availability: short-term Location: Hochheim

Condition: excellent (used), Universal DOUBLE-SIDE SIZING & EDGE BANDING MACHINE (for both 1st and 2nd pass) Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Panels thickness (min/max) mm 10 - 60 Working width (min/max) mm 240 - 2700 Numerical Control PC Base Windows /Software SINITRA Adjustable feeding speed (m/min ) 10 - 40 (INVERTER C.N.) Distance (center-axes) of the Disappearing Dogs (mm) 500 SIZING PART (for each side): Anti-chipping Milling Unit AS 10 (Kw 5,8) pneumatic N° 2 Hogging Units (1 Top + 1 Bottom) DT 10 (Kw 5,8 x 2) Spraying unit (Anti-sticking liquid) EDGE-BANDING PART (for each side): 1° Glueing Unit (Hot Melt + Quick Melt Unit) SP30 (High Melt + Edge Control EC 40) 2° Glueing Unit (Thermofusion with hot air) Air Force System Band Pressure zone (N.C. adjustment) . Edge coils supporting unit (No. 6 reels) Snipping (end-cutting) unit IT 90-X (Kw 0,65 x 2) speed 28m/min. 0 - 25° Rough Trimming unit RS 10 (2 x Kw 2) Fine Trimming unit (Multi-profile, by N.C.) RF 40 (Kw 1 x 2) 0 - 25° Multi Function Unit (Profile contour Trimming unit) AR 80 (Kw 0, 65 x 2) max speed 25 m/min - ROTAX motors with automatic tool change (tools) Profile Scraping unit (Multi-profile, by N.C.) RB 40 (multiprofile) Glue scraping unit RC 20 + Spraying Unit (for polishing liquid) Buffing unit SZ 30 (Kw 0,37 x 2) Dwsdpju Rc Anefx Akrsb

Condition: excellent (used), Double-side Sizing & Edge Banding - First Machine (1st in a line) Double side TWIN machine (1 Left Side single machine + 1 Right-side sigle machine) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 10 / 60 Working width (min/max) mm 100 / 1200 Numerical Control PC base Windows /Software PC / SINTRA Adjustable feeding speed (m/min) 10 - 40 (INVERTER C.N.) SIZING PART (for each side): Spraying unit (Anti-sticking liquid) No. 2 Hogging Units (1 Top + 1 Bottom) DT 10 (Kw 5,8 x 2) Free space Djdsu Rc Hyspfx Akrowb EDGE-BANDING PART (for each side): 1° Glueing Unit (Hot Melt Glue + Quick Melt system) SP 30 (High Melt + Edge Control EC 40) 2° Glueing Unit (Thermofusion with hot air) Air Force System Band Pressure zone (N.C. adjustment) Edge coils supporting unit (No. 6 reels) Rough Trimming unit RS 10 (2 x Kw 2) Fine Trimming unit (Multi-profile, by N.C.) RF 40 (2 x Kw 1) 0°-25° No. 1 Milling grooving unit EB 60 (1 x Kw 5) 0°-90°, ISO 30 motor Profile Scraping unit (Multi-profile, by N.C.) RB 40 Glue scraping unit RC 20 Spraying Unit (for polishing liquid) Buffing unit SZ 30 (2 x Kw 0,37)

Condition: excellent (used), Year of construction: 2010, I sell the fully equipped edge banding machine BRANDT Ambition KDF 650 C, year 2010: Configuration: Entry fence manual adjustable Premilling manual adjustable Edge banding EVA Material pressure zone manual adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom servomotorical adjustable Corner rounding 2-motor manual adjustable Radius R2 scrapers pneumatic adjustable Glue scrapers manual adjustable Polishing brushes Control panel Power Control PC20 Working thickness adjustment servomotorical Material height 8 - 60mm Edge thickness 0,4 - 12,0 mm Feeding speed 11/14 m/min. Total length including feeding plate 5860mm Total weight 2600 kg 2nd additional glue tank included. With full Documentation and CE. Very good condition, fully working! Dwedpju E E D Dofx Akreb

Condition: excellent (used), FULL LINE OF 4 SIDE SIZING-MILLING & EDGE BANDING Dwjdpfx Akoun N Dljrsb Composed of the following machines: A) W06027 1st Double Side Sizing & Edgebander "IMA" Mod. Combima II / 440 /A / R3 B) Turning Station 90° C) W06028 2nd Double Side Sizing & Edgebander "IMA" Combima II / 190 / B / R3

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Compact and flexible in the smallest of spaces. Workpieces receive their finish within a length of just 2.13 m. Equipped with a 1.1 kW high-frequency motor joining unit and diamond-tipped spiral joining cutter, Teflon-coated glue unit, pre-end trimming unit, and HF multifunction milling unit. Two free slots for finishing units, such as a surface scraper and polishing unit. Simple operation via 3.5'' color touchscreen. Technical data Machine length: 2,122 mm Workpiece thickness: 10–45 mm Minimum workpiece width: approx. 120 mm Edge thickness: 0.4 – 2.0 mm Edge height max.: workpiece height + 4 mm (2+2) Electrical connection: 400 V Total connected load: 3.6 kW Feed speed: 6.5 m/min Pneumatic connection: 6 bar Net weight: approx. 490 kg Options: Dwsdpfxjy Eizze Akreb Surface scraper unit Diamond tools, height = 45 mm Location: Flörsheim Availability: short-term

Condition: used, Year of construction: 2016, Industrial automatic edge banding machine SOLUTION XD KEY FEATURES "E-TOUCH" CONTROL WITH AUTOMATIC PROGRAMMING: A SINGLE "TOUCH" IS ALL IT TAKES TO OPERATE THE MACHINE STANDARD PRESSURE DEVICE WITH DRIVE BELT FOR OPTIMAL PANEL GUIDANCE EDGE BANDING OF ROLL MATERIAL, STRIP EDGES AND SOLID WOOD EDGES GENERAL FEATURES Single-sided edge banding machine in left-hand version for edge banding of roll material and strip edges with all conventional hot melt adhesives. The base frame consists of a stable steel welded frame with higher rigidity, which provides optimal support for the installation of the processing units. The upper pressure beam consists of a thick-walled steel profile and a double trapezoidal drive belt, which is automatically positioned according to the panel thickness. Height adjustment with display on the upper pressure beam and on the operator panel. Manual workpiece feeding system with a large-sized work area and increased support surface facilitates the feeding of large workpieces. Adjustable infeed fence for two positions with automatic selection for processing with or without a pre-milling unit. Upper working units are attached to the pressure beam and mechanically connected to ensure automatic adjustment when changing panel thickness. Lower working units are attached to the machine frame or to the longitudinal support for precise referencing to the panel. All high-frequency motors are operated via frequency inverters. Each unit is equipped with its own inverter for optimal flexibility and improved machine production times. Protective hood for all units positioned after the glue application unit. Polycarbonate windows ensure a good view of the units during processing. Interior lighting of the hood. Protective hood with sound-absorbing material for lower noise emissions during operation. Spacer on the infeed fence allows the machine to be fed with the correct spacing. The spacing is automatically adjusted to the selected feed rate. Dust extraction port arranged on the pivoting control panel, positioned in the infeed area, is adjustable for ergonomic operation. The electrical system complies with current regulations. Electrical components are housed in a metal housing, attached to the machine frame and equipped with doors for easy access in case of maintenance. Standard voltage is 400 V EU 50 Hz (with neutral conductor). Material feed is via a feed chain with 80 mm wide chain plates made of rubberized nylon, for optimal guidance and high load capacity. The chain slides on 2 guides made of hardened and ground steel, one round and one flat guide, to guarantee straight feed and to protect against lateral displacement. Automatic chain lubrication. The amount of lubricating oil is optimized by the control system depending on the panels being processed. External support roller track positioned along the entire length of the machine; consisting of an extendable opening system up to 650 mm (for panels with a maximum width of 1200 mm). E-TOUCH PC control system for quick and easy execution of the main functions of the machine. Includes: – Processing of programs in Just in Time mode – Possibility of management via bills of materials – Possibility of management by Dwodexy Tm Ijpfx Akrob

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, operating hours: 1,651 h, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, feed rate X-axis: 25 m/min, HOMAG KAL 310 + panel return system TFU 140! TECHNICAL DETAILS Profile milling unit FK11 manual Edge thickness: max. 3 mm Motors: 2 units Motor power: 0.4 kW per motor Frequency: 200 Hz Speed: 12,000 rpm Feed speed: max. 20 m/min Feed speed for continuous trimming without profile trimming: max. 30 m/min Panel length single-sided: min. 240 mm Dsdpfxsyzxa Ej Akrowb Panel length double-sided: min. 120 mm Panel thickness: 12 - 60 mm Panel spacing with PC22: min. 500 mm Minimum workpiece gap for workpiece thickness over 22 mm: min. 600 mm Multi-scraper MN21 Automatic Number of profiles: max. 5 different profiles Edge thickness: max. 3 mm Panel thickness for radius R = 3 mm: min. 13 mm Panel thickness for bevel 0.5 x 45°: min. 10 mm TC knives: 2 units Bevel angle: 20° Radius: R = 1.5 / R = 2 / R = 3 / R = 5 Pre-milling unit BF10 Motors: 2 units Motor power: 0.55 kW per motor Frequency: 200 Hz Speed: 12,000 rpm Swivel range: +/- 1° TC cutter: 70 x 25 mm HSK: 25 Cutting angle: 54° Feed speed: 18-25 m/min Workpiece thickness: 8-60 mm Edging material (roll): 0.3-3 mm MACHINE DETAILS Operating hours Operating hours: 6,358 h Feed time: 1,651 h EQUIPMENT Pre-milling Automatic adjustment of the infeed fence Infeed device with 2 rollers Quickmelt application station 2-roller magazine infeed Automatic adjustment of the pressure zone HL84 end trimming unit with pneumatic adjustment BF10 flush milling unit with pneumatic adjustment FK11 profile milling unit MN21 multi-profile scraper unit for 5 different profiles Grooving unit Glue joint scraper Buffer Return system TFU140

Condition: excellent (used), 4-SIDES LINE of Double-side Sizing and Edge Banding. Workpieces dimensions: min. mm 195 x 250 x 60 / max. mm 1200 x 2500 x 60 Composed of the following machines: KZ0400a) Infeed table "HOMAG" Mod. TBL 100/25/12/S with motorized rollers Adjustable feeding speed 7-40 m/min KZ0400b) 1st Double-side Sizing & Edge Bander "HOMAG" Mod. KFL 325/M1/C Adjustable feeding speed 15-40 m/min - with PC 22 SIZING: Double-Hogger KD10 (2 x Kw 6.6) + GLUEING: A3 with 2 reels BANDING: Overlapped Trimming BF10 (2 x Kw 0.55), NC controlled Fine Trimming PF20 (2 x Kw 0.4), Grooving Unit UF11 (Kw 4), Free space, Profile Scraper PN10, Finish (Glue Scraper + Buffing) KZ0400c) Turning Station "HOMAG" Mod. TDL 310 / 25 / 12 (from lengthwise to crosswise) Adjustable feeding speed 20-60 m/min KZ0400d) 2nd Double-side Sizing & Edge Bander "HOMAG" Mod. KFL 326/M2/C Adjustable feeding speed 15-32 m/min - with PC 22 SIZING: Anti-chipping (1xKw 4,5), Double-Hogger KD10 (2 x Kw 6.6) + GLUEING: A3 with 2 reels Dwodeiztxyspfx Akreb BANDING: End-trimming HL84 (2xKw 0.22), Overlapped Trimming BF10 (2 x Kw 0.55), NC controlled Fine Trimming PF20 (2 x Kw 0.4), Contour Trimming (Corner rounding) FF32 (4 x Kw 0.4), Free space, Profile Scraper PN10, Finish (Glue Scraper + Buffing) MINIMUM EDGE LENGTH 70 MM (Part thickness for narrow parts max. 25 mm, Edge thickness max. 2 mm, Cycle speed: max. 20 T/min, Feed rate max. 20 m/min.)

Condition: excellent (used), Double-side Sizing-Milling & Edge Banding - First (1st) machine in a line Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Panels thickness (min/max) mm 8 / 45 (60) Working width (min/max) mm 250 / 1300 Numerical Control / Software ICOS Open (Windows base) Adjustable feeding speed (m/min ) 10 - 50 (Master & Slave) Safety and sound-proof enclosures/cabins SIZING PART (for each side): Hogging Units (2 x Kw 6,6) Max 35 m/min Milling unit (joint Trimmer) 75.186 (1 x Kw 4,4) EDGE-BANDING PART (for each side): Glueing Unit (PUR. Glue + Quick Melt system + EVA Glue) VTG 3-24 + 283.201 + 283.19 + 283.203 Pressure zone Edge coils supporting unit (No. 24 reels) Dwsdpfx Akoxggthjrjb Rough/Fine Trimming unit 08.055 (2 x Kw 1) 0°-30° (30 m/min) Rough/Fine Trimming unit 08.055 (2 x Kw 1) 0°-30° (30 m/min) Profile Scraping unit 08.515 Glue scraping unit 08.521 Buffing unit 08.617-2 (2 x Kw 0,18) No. 3 Grooving units 08.190 (2 x Left-hand + 1 x Right-hand) (Kw 4,5 x 3) swivelling 90°/180°/270°

Condition: excellent (used), FULL (4-SIDES) FLEXIBLE LINE of Sizing-Milling & Edge Banding, with completely automatic handling and PC53 Line Control. With HIGH-PERFORMANCE PACKET (feeding speed up to 60 m/min) Composed of the following machines: 206026A) Loader (double station) "BARGSTEDT (HOMAG)" Mod. TBH 501/D/25/12 206026B) 1st Single-side (Left) Sizing & Edge Banding machine "HOMAG" Mod. KFL 612/16/A3 206026C) 2nd Single-side (Right) Sizing & Edge Banding machine "HOMAG" Mod. KFR 612/18/A3 206026D) Conveyor (motorized rollers) "HOMAG" Mod. TRL 100/35/12 206026E) Curved transfer (90°) with a 90° motorised carpet "HOMAG" Mod. TRL 100/35/12 206026F) High-performance 90° angle transfer "HOMAG" Mod. TWR 320/30/12 Dodpfxezwlabj Akrewb 206026G) Double-side Sizing & Edge Banding machine "HOMAG" Mod. KFR 526/9/A3/30 206026H) Turning Station "HOMAG" Mod. TDR 510/30/12 (with WANDRES cleaning unit) 206026I) Stacker (double station) "BARGSTEDT (HOMAG)" Mod. TSH 501/D/25/12

Condition: as good as new (ex-display), FULL LINE of Double-side Sizing-Milling & Edge Banding. Composed of the following machines: O06027A) Gantry-portal Loader (Double pick-up station) "BARGSTEDT" Mod. TBH 250/D/25/12 O06027B) 1st Double-side Sizing & Edge Bander "HOMAG" Mod. KFL 525 / 6 / A3/ 15 O06027C) L shaped connecting roller conveyor "HOMAG" Mod. TWL 310 / 25 / 12 O06027D) 2nd Double-side Sizing & Edge Bander "HOMAG" Mod. KFL 526 / 9 / A3 / 25 O06027E) Connecting Roller Conveyor "HOMAG" Mod. TBL 100 / 25 / 25 O06027F) Connection transfer (on rails) "HOMAG" Mod. TWL 120 / 30 / 02 S O06027G) Connection transfer (on rails) "HOMAG" Mod. TWL 120 / 34 / 02 S Dwodpswxvdcsfx Akreb O06027H) Gantry-portal Stacker (Double pick-up station) "BARGSTEDT" Mod. TSP 410/D/25/12

Condition: used, Year of construction: 2021, - Edge joining unit - Teflon-coated gluing unit - Miter saw unit - Multifunction milling unit x-motion PLUS, flush and radius milling unit - Edge processing unit - Radius grooving unit - Polishing unit Edge banding machine Manufacturer: Felder Format4 Type: Tempora60.06LX Year of manufacture: 2021 Technical data Control system: x-motion PLUS Chain feed Feed speed: 10 m/min Drive motor: 0.75 kW (S6) - 1.1 kW (S6) Minimum workpiece length: 140 mm Minimum workpiece width: 70 mm The minimum workpiece width varies depending on the workpiece length, height, and surface texture. Rotary table edge magazine for edge banding material Diameter of the rotary table: 750 mm Edge thickness: 0.4 - 3 mm Pull-out frame Dwedpfx Akszuyh Isrob Pull-out workpiece support, extendable up to 450 mm Upper pressure bar Manually adjustable workpiece height: 8 - 60 mm Edge feeder for edge banding and strip material Edge joining unit: 2.2 kW, diamond cutter Z2 Speed: 12,000 rpm, 2 x 1.1 kW Teflon-coated gluing unit for 1.5 kg of EVA or PUR granules Ready for use after only 10 minutes of heating time Tool-free quick-change system Pressing unit, pneumatically controlled 1 driven and 2 tapered pressing rollers form the pressing zone Shear cutter for edge banding material, 0.4 - 3 mm thickness Miter saw unit with two high-frequency motors 0.35 kW, 12,000 rpm Pneumatically swiveling 0 - 10 degrees Multifunction milling unit x-motion PLUS, flush and radius milling unit 1 high-frequency motor above and below, 0.75 kW, 12,000 rpm, each with 4 interchangeable cutters Edge processing unit For soft-forming and post-forming workpieces, for processing the end edge with 0.4 - 3.0 mm edge thickness and 10 - 60 mm workpiece height 2-axis motor-controlled radius grooving unit including pneumatic retraction function Polishing unit Above and below Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is non-binding.

Condition: excellent (used), LINE (half line) of Double-side Sizing-Milling & Edge Banding, with automatic handling system. Composed of the following machines: Djdpfohvah Nsx Akrjwb A) LOADER (Portal) with double station "RBO" Mod. Advantage C 3200 and central motorized rollers table. B) Infeeding Rollerway, with double-cone TURNING Device "RBO" Mod. GPK-1 C) Double-side SIZING and EDGE BANDING machine "BIESSE" Mod. Stream SB2 11.0 D) UPSIDE DOWN 180° TURNING MACHINE "RBO" Mod. Ribaltatore E) Outfeeding Rollerway, with double-cone TURNING Device "RBO" Mod. GPK-2 F) STACKER (Portal) with double station "RBO" Mod. Advantage SC 3200, with central motorized rollers table.

Condition: used, Used machine Djdpfxsw Nad He Akrswb Equipment and technical specifications: Automatic edge feeder Cartridge glue system 4-roll printing unit Cross-cut saw unit Flush trimming unit Combination trimming unit: flush/bevel/radius Radius scraper Buffing unit Edge band thickness 0.3 - 20 mm (depending on unit) Edge band height max. 66 mm Edge band length min. 200 mm Feed rate 8/16 or 12/24 m/min With LIGMATECH workpiece return system The return line of this return system is located above the panel processing level. The workpieces move back to the operator on an inclined plane. Special features compared to the ZHR 0x models: Automatic detection and rotation of parts from transverse to longitudinal Automatic adjustment of the rotation speed to the workpiece length Minimum and maximum workpiece dimensions For longitudinal edge processing: 2200 x 1000 For transverse processing with subsequent rotation: 250 x 120/2200 x 800 Maximum workpiece thickness: 60 mm Location: Bavaria Availability: Short-term

Condition: excellent (used), Double-side Sizing-Milling & Edge Banding - First (1st) machine in a line Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Panels thickness (min/max) mm 10 / 60 Working width (min/max) mm 230 / 1600 (ca.) Numerical Control / Software WinEdge Adjustable feeding speed (m/min ) 10 - 30 Safety and sound-proof enclosures/cabins SIZING PART (for each side): No. 2 Hogging Units (2 x Kw 5,8 ca.) Djdpfx Ajl Hydmjkrswb No. 2 Milling units (2 x Kw 4 ca.) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt glue + Multing Unit) Pressure zone (adjustable by CN) Edge coils supporting unit (No. 6 reels) Rough Trimming unit (2 x Kw 1 ca.) Fine Trimming unit 08.055 (2 x Kw 0,5 ca.) 0°-30° No. 5 Milling grooving units (5 x Kw 4 ca.) Profile Scraping unit Glue scraping unit Spraying Unit (for polishing liquid) Buffing unit + Hot Air Heater (to reactivate the color of plastic tape)