Double-side SIZING-EDGE BANDING Machine

IMA Combima II 590 / B / R3

Condition: used, machine/vehicle number: 005639, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Corner Rounding Unit: yes Combination Squaring Edgebanding Machine: First and Second Pass Max Panel Width: 3000 mm Laodpfx Aaevw Evgj Esk Max feed speed: 50 m/min Operating Units Right Side: 12 nr Operating Units Left Side: 12 nr

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 - 3 Edges thickness in stips / lippings (min/max) mm 3 - 12 Panels thickness (min/max) mm 8 - 60 Numerical Control ICOS open TS Feeding speed (adjustable) m/min 4 - 20 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) Pre-milling Unit (vertical joint trimmers) 08.376 (2 x Kw 3) Glueing Unit (Hot Melt Glue) 283.1513 Band Pressure zone Edge coils supporting unit (reels N°) 1 Ledod Nuu Hjpfx Aa Eeak Snipping (end-cutting) unit 08.415 (2 x Kw 0,66) Fine Trimming unit 08.055 (2 x Kw 1) 0°-30° Multi Function Unit (Profile contour Trimming unit) 08.342 (2 x Kw 0,66) servo Profile edge scraping unit 08.519 Glue scraping unit 08.50 Buffing unit 08.612 (2 x Kw 0,25) Free space

Condition: used, Year of construction: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4-30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6-45/60 mm (depending on equipment) Edge types: Rolls and strips Feed speeds: Continuous feed from 12-30 m/min (depending on equipment) With adjustable infeed level in the magazine area (max. adjustment range 30 mm) With height-adjustable magazine plate for changing the lower edge overhang With large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm With transport chain including automatic central lubrication With motor-driven, position-controlled bridge height adjustment With pneumatic locking roller for the shortest workpiece sequence With extendable workpiece support (extension width 1600 mm) With space-saving, pneumatically controlled sliding hoods over the entire machine (Deviations for individual units are possible) with motorized infeed guide with injection oiler for lubricating all joints and bolts (including operating hours counter) with central connection for extraction (2x Ø 200 mm) with integrated chip collection box at the end of the machine (when radius scraper unit is installed) PPC 231 control system - Power PC for efficient setup and changeover - 15" SVGA screen with touchscreen - 128 MB CF memory card - USB connector on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - all information in plain text and/or graphics - Rotatable and pivoting control panel at eye level - Dust-proof membrane keyboard with softkeys (pushbuttons) - LED display for unit preselection - Program list with program names and numbers - Extensive program memory - Individual selection of the units with the functions as basic setting options for setpoints, route points and tool corrections as well as the fixed route points - Centralized and clear setup processes for units and their axis settings via fine adjustment (depending on the equipment) - Interval display for the shortest workpiece distance - Integrated path control - Path points are controlled generally or program-specifically - Clear and complete recording of all operating data - Service messages in plain text - Diagnostic system - including integrated synchronous bus system for high precision in unit control - Individual administration for up to ten users, including password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASIC MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the basic machine Spraying device 1856 for the inlet and outlet area For the inlet area: Electronically controlled release agent sprayer with Riepe-LPZ/II release agent For the outlet area: Electronically controlled cleaning agent sprayer with Riepe-LP163/93 cleaning agent (only in conjunction with pre-milling unit 1961 and surface scraper 1964) Joint milling unit Joint milling station 1803 (2x 2.6 kW, 200 Hz, 12000 min-1) With two plunge-controlled milling units 1 unit in up-cutting direction 1 unit in down-cutting direction Plunge path 5 mm With static frequency converter 200 Hz Without milling tool With ProLock screw-in clamp for fast tool changes Tool for 1803 (workpiece height up to 60 mm) Diamond milling cutter PRO UT 2 pieces (front and rear) including protective covers Ø 100-63 - Ø 30 mm, Z = 3 + 3 + 3, 1x left-hand rotation, 1x right-hand rotation Noise-reduced milling cutter with integrated chip guide DFC technology (Leitz syst Ljdpfx Aevvkfdea Ejak

Condition: used, Year of construction: 2019, Edge Control Numerical Control Panel height min - max mm 6 - 60 Pvc/Abs up to mm 3 Minimum panel length \ width mm 140 \ 60 Feed speed up to mt/min 10 / 25 continuously Working height electronically adjustable by C.N Lateral roller conveyor with idle wheels for panel support Rectifier unit with 2 motors Coil holder plate Gluing unit for EVA \ PUR glue with cartridge or granular system Edge pressure group on straight profiles with pressure rollers electronically adjustable by N.C Trimming unit with 2 motors Gleaning group with 2 tilting motors electronically adjustable by C.N. Rounding unit with 4 multifunction motors (edger + rounder) with regulation by numerical control in automatic Edge scraping unit with electronic regulation from N.C. Glue scraper group Brush group Machine length mm 6500 approx Weight Kg 2750 approx Ledpfx Aewwhn Dsa Esak

Condition: good (used), Year of construction: 2007, Technical characteristics : - Max machinable length 3200 mm - Minimum machinable length 200 mm - Maximum width 200 mm - Minimum width 40 mm - Maximum workpiece height 130 mm - Depth with max Ø to tenon 320 mm: 105 mm - Tenoning carriage speed min / max 0/100 m / min - Min / max profiling speed: 3/15 m / min Tenoning: 1- end cut saw 5.5 hp (4 kW) Saw Ø 400 mm 2- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard 3- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard Vertical positioning with continuous axis 4- Digital angular adjustment clamp Profiling: 5-: router to be profiled on the right Shaft 50 x 320 mm Ljdot R T Hcepfx Aa Esak 10 hp (7.5 kW) Ø tools 130/240 mm Axle stroke 280 mm Time-delayed anti-shattering intervention during calibration Double direction of rotation Vertical and horizontal positioning with continuous axis 6-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Axle stroke 280 mm Vertical and horizontal positioning with continuous axis 7-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Vertical and horizontal positioning with continuous axis 8-: close-out recovery group Vertical and horizontal positioning with continuous axis Device for extracting the shutter 9-: lower horizontal shaft for groove Vertical and horizontal positioning with continuous axis 88.5 hp (66.4kW) 10-: digital guide 11-: Return of parts to the operator NO TOOLS AVAILABLE OBTAIN ADDITIONAL PHOTOS NOTE: SUBJECT TO CHANGES IN TECHNICAL DATA

Condition: used, Year of construction: 2022, Used machine Year of manufacture: 2022 Condition: as new Includes 6 months full warranty! Only 70 operating hours; the machine has not yet been used in production! Equipment and technical data: Lasdpfowxz Uyox Aa Eek BASE MACHINE Holz-Her Processing Center DYNESTIC 7535 10.5 Lift Processing length: 3100 mm Machine frame: welded construction with ground and hardened prism guides for the gantry, aggregate head, and consoles. Gantry design. Rack-and-pinion drive, helical gears in X and Y direction, 1 precision ball screw in Z direction for accurate positioning. MATRIX TABLE Fixed, continuous processing table with grid markings and through-slots in X and Y direction, slot spacing 50 mm. Includes 25 meters of sealing cord for fixing the sacrificial plate. 1 work zone with stop rails/stops - stop height 30 mm, pneumatically retractable. 2 stop rails in Y direction and 1 stop in X direction right (as seen from the front of machine). Remote maintenance capability Integrated network card for transfer of control and program data. Data transmission via high-speed internet connection. Requirement: High-speed internet connection at the machine. USB port For data backup and for directly importing processing programs at the control panel. TECHNICAL DATA Working dimensions 7535 10.5: Max. nesting table surface: X = 3100 mm, Y = 1560 mm Max. travel paths: X = 4695 mm, Y = 2305 mm, Z = 565 mm Max. machining height 7535/7735 Classic without pusher: Z = 300 mm from table top (excluding sacrificial plate) Max. pusher clearance height above table for Push/Auto/Lift versions: Z = 250 mm from table top (excluding sacrificial plate) Maximum programmable speed Vector speed: 128.0 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min MACHINE OPERATION SOFTWARE CAMPUS V7 PLUS CAD/CAM software, 1 license incl. material removal simulation BetterSim 1 software license secured via dongle for the machine CAMPUS V7 PLUS software for CNC processing centers: Consisting of: 1. CAMPUS NC-HOPS 2. CAMPUS aCADemy 3. CAMPUS MT-Manager 4. CAMPUS Workcenter V7 PLUS 5. CAMPUS 3D material removal simulation BetterSim CAMPUS NC-HOPS Graphical variant system with conversational programming and CAD/CAM features for creating part variants using macro technology. Hi-Speed USB-Device Network Server Allows use of the CAMPUS single license on the machine or a PC in the same network. Only one license may be used in the network at a time! Additionally: CAMPUS V7 PLUS CAD/CAM software, 1 license incl. material removal simulation BetterSim 1 software license secured via dongle for office or machine CAMPUS V7 PLUS software for CNC processing centers: Consisting of: 1. CAMPUS NC-HOPS 2. CAMPUS aCADemy 3. CAMPUS MT-Manager 4. CAMPUS Workcenter V7 PLUS 5. CAMPUS 3D material removal simulation BetterSim CAMPUS NC-HOPS Graphical variant system with conversational

Condition: used, machine/vehicle number: 008160, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 14 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr Lsdpfx Ajxqm Iyoa Esak

Condition: excellent (used), Horizontal Panel Beam Saw - With rear lifting table Numerical Control MCS Evolution Software Outside Rollers table for pre-loading (mm 4500 x 2200 ca.) Lifting table (mm) 4300 x 2200 Turning device (rotating unit) at 90° No. 2 Rear pushers (one with clamps / grippers) Twin Pusher No. 10 clamps / grippers Max. cutting width (mm) 4300 Useful stroke of the pushing system (mm) 4300 Max blade projection (mm) 135 Max clamps opening (mm) 133 Scoring Unit (max saw diameter / power) 200 mm Main Sawing Unit (max saw diameter / power) 460 mm - Kw 27 Adjustable speed of the saw carriage (m/min) 0 - 150 Front supporting tables with Air blowing system (N.) 4 Ljdpfxjq Rfahj Aa Esak Total power (Kw) 36 (ca.)

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Equipment and Technical Data: - For classic nesting processing with wear plate - Machine frame of welded construction with ground and hardened prism guides for the gantry, unit head, and consoles - Gantry-type traveling column - Helical rack and pinion drive in X and Y axes, ball screw in Z axis for precise positioning - Working dimensions: - Max. support area on nesting table: X = 3100 mm, Y = 1560 mm - Max. traverse paths: X = 4695 mm, Y = 2100 mm, Z = 293 mm - Max. clearance height over DYNESTIC table: Z = 100 mm from table top (without wear plate) Lsdpfxjwka Upe Aa Eeak - Maximum programmable speed Vector speed: 128 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min - DYNESTIC table: - Fixed, continuous processing table with grid layout - Continuous grooves in X and Y directions - Groove spacing: 50 mm - Includes 25 meters of sealing cord for clamping the wear plate - Vacuum fields: Single-circuit vacuum system - Drilling unit 7877: - 19 spindles - Drive power: 1.7 kW - 13 vertical spindles: - Individually selectable - Arranged in U-shape - 5+4 in X direction, 4 in Y direction - 32 mm spacing - Max. drill diameter: 35 mm - Total drill length: 70 mm from screw-on end (depending on panel thickness) - Spindle stroke: 70 mm - Rotational direction: alternating clockwise/counterclockwise - Speed (max): 1000 - 4400 rpm, infinitely variable - Tool holder: M10 thread, 11 mm fit - Without tool, without holder - 6 horizontal spindles: - 2 double drill spindles in X direction - 1 double drill spindle in Y direction - Tool holder: M10 thread, 11 mm fit - Max. total drill length: 63 mm from screw-on end - Without tool, without holder - Milling unit 7842: - Power: 12.0 kW (S6) - Max. speed = 1000 - 24,000 rpm, infinitely variable - Max. power at 12,000 to 24,000 rpm - Air-cooled - With HSK-F 63 tool holder - With right-hand threaded nut (for right-hand rotating tools) - With collet chuck for HSK shank - Ceramic ball bearings (hybrid bearings) - Tool weight max. 6 kg (incl. holder) - Tools: milling and grinding tools max. Ø 160 mm - Safety enclosure according to CE standard - Side and rear safety fence - Vacuum pump: 500 m³/h, dry-running - Personnel safety ensured by light barriers in the front machine area - Hand-held control device for remote operation of the machine with the following functions: - Start/stop of the processing program - Control of processing cycle speed - Reset button - Manual feed/rapid traverse for all axes - EMERGENCY STOP - CAMPUS V7 CAD/CAM software 1x machine license consisting of: - CAMPUS NC-HOPS: - Graphic variant system with WOP and CAD/CAM features for creating part variants using macro technology - CAMPUS MT-Manager - CAMPUS Workcenter - CAMPUS DXF interface - Automatic central lubrication - Automatic lubrication at defined intervals - Additional sealing against dust via pressurization in each guide carriage

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 - in stips / lippings mm max 1 Lajdpfx Asi Hn Srea Ejk Panels thickness (min/max) mm 14 / 60 (LASER - Max 50) Numerical Control ICOS Open Feeding speed (adjustable) m/min 6 - 30 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Panels in-feed (servo) system A1 / 15 Pre-milling Unit (vertical joint trimmers) 08.378 (2 x Kw 4,5) adjustable by N.C. Glueing Unit (P.U.R. Glue + Quick Melt unit) 283.201 + 283.203 Glueing Unit (Thermofusion with Laser) Laser System LASERLINE Spraying Unit (for anti-release liquid) Band Pressure zone + Edge coils supporting unit (No. 36 + 12 reels) Snipping (end-cutting) 08.42 (Kw 0,2 x 2) work speed up to 30 m/min (0°-25°) Rough Trimming unit 08.0555 HS/LS1 (Kw 1 x 2) Fine Trimming unit (Multi-profile, by N.C. adjustment, for 4 profiles) 08.0587 (Kw 0,66 x 1) Multi-Profile Copying unit by N.C (fine + contour trimming) KFA 30 (Kw 0,5 x 1) max 30 m/min Profile Scraping unit (Multi-profile, by N.C. adjustment, for 4 profiles) 08.0516 Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.614 (Kw 0.25 x 4) No. 2 Milling grooving units 08.190 (Kw 4,5 x 2) swivelling 90°/180°/270° (adjustable by CN)