Used Dust Extraction System for sale (42,213)

Condition: new, Year of construction: 2026, DCV4500 VIBER – Modern Industrial Dust Extraction System with Automatic Filter Cleaning The DCV4500 VIBER is a modern industrial dust extraction system designed for continuous, efficient, and quiet operation in demanding woodworking environments. The unit ensures stable extraction performance throughout the entire operating cycle, minimizing the risk of efficiency losses and production downtime. Main Advantages of the Machine VIBER system – automatic filter cleaning without interrupting operation. Full upper enclosure – significantly reduces noise and vibrations. Extraction capacity of 4500 m³/h – ensures effective dust removal even with several machines operating simultaneously. Highly sealed system design – prevents heat losses and guarantees clean air in the production hall. New safety protection system – improves operational reliability. Metal rotor – dynamically balanced for quiet and vibration-free operation. Design and Technology The machine is based on a reinforced, hardened steel construction. Its compact dimensions allow the extractor to be installed close to a wall or between machines without limiting the available working space. Metal waste containers equipped with viewing windows and a mobile system enable quick emptying and easy monitoring of filling levels. Service doors provide convenient maintenance access and simplify the replacement of filter bags. Precision and Work Efficiency The dust extraction fan used in the DCV4500 VIBER provides an air suction speed of 28–32 m/s. Thanks to the specially designed rotor blade geometry, maximum efficiency is achieved with minimal energy consumption. At the same time, filtration down to 5 microns effectively captures fine dust particles, improving workplace air quality and enhancing the final quality of processed materials. Applications The DCV4500 VIBER is an advanced central dust extraction system ideal for: woodworking plants, furniture manufacturers, producers of wooden components. It efficiently supports machines such as sanding machines, panel saws, edge banders, and other equipment generating large amounts of dust and chips. Its reliable operation makes it suitable for both serial production and intensive industrial use. Standard Equipment Control cabinet with ON/OFF function 18 polyester filters with filtration efficiency down to 5 microns Metal waste containers with viewing windows Full sound-insulated enclosure Optional Equipment HEPA filters for filtration of particles below 5 microns Ceiling-mounted duct systems for multiple machines Equipment for operation with container level sensors Technical Specifications Parameter Value Hedpouc Unqjfx Ac Tjt Motor power (S1) 3.0 kW Power supply 400 V / 50 Hz Motor speed 3000 rpm Extraction capacity 4500 m³/h Negative pressure 3000 Pa Noise level 80 dB Suction port diameter 200 mm Air velocity 28–32 m/s Filtration area 6 m² Number of filters 18 Filter material Polyester, 5 microns / filter category "G" Dimensions 752 × 1502 × 2200 mm Weight 220 kg

Condition: new, Year of construction: 2026, DCV8900TC VIBER Industrial Dust Collector – Advanced Extraction System with Automatic Filter Cleaning The DCV8900TC VIBER is a modern industrial dust extraction system designed for intensive operation in professional woodworking plants and industrial production facilities. Combining advanced technology with maximum efficiency, it ensures stable extraction performance while reducing noise and vibration levels. The integrated VIBER automatic filter cleaning system minimizes maintenance requirements and maximizes operational reliability. Key advantages VIBER system – automatic filter shaking and cleaning without interrupting operation. TC acoustic enclosure – effective noise insulation and vibration reduction. DAMAGE PROTECT system – mechanical protection against the intake of hard foreign objects. REHEAT heat recovery system – recovers heat from exhausted air, improving energy efficiency. High airflow capacity of 8,900 m³/h – designed for large industrial facilities. High airtightness construction – cleaner air and reduced heat loss inside the production hall. Construction and technology The extraction unit is equipped with a reinforced metal impeller that is dynamically balanced to ensure stable, quiet, and reliable operation. The fan blade geometry has been optimized for maximum suction efficiency and reduced energy consumption. The integrated REHEAT system enables recovery of thermal energy from discharged air, significantly lowering operating costs and improving the overall efficiency of the ventilation system. Precision and performance The DCV8900TC VIBER maintains a constant suction velocity of 28–32 m/s, even when operating with multiple machines simultaneously. Polyester filters with a filtration accuracy of up to 5 microns, with the option of installing HEPA filters, ensure excellent air quality in demanding industrial environments. The automatic filter cleaning system maintains consistent airflow performance and reduces downtime associated with manual maintenance. Applications The DCV8900TC VIBER is designed for large-scale woodworking, furniture manufacturing, and industrial production facilities. It is ideal for extraction from machines such as: Hedpfx Aoudaazec Tet edge banding machines sanding machines panel saws format saws CNC woodworking equipment The unit works perfectly as a central dust extraction system for multiple production stations operating simultaneously. Standard equipment Automatic VIBER filter cleaning system TC acoustic insulated enclosure REHEAT heat recovery system DAMAGE PROTECT protection system Control cabinet Metal waste containers (500 L) Polyester filter cartridges Optional equipment HEPA filter system Additional air distribution system Ceiling-mounted extraction connections Technical specifications Parameter Value Motor power 7.5 kW / 400 V, 50 Hz Motor speed 3,000 rpm Extraction capacity 8,900 m³/h Maximum vacuum pressure 3,000 Pa Noise level 80 dB Suction inlet diameter 300 mm Air velocity 28–32 m/s Filter surface area 20 m² Filter material Polyester, 5 microns / filter category "G" Number of filters 45 Dimensions (L × W × H) 2400 × 1170 × 2240 mm Weight 500 kg

Condition: new, Year of construction: 2026, DCV6500TC VIBER – Professional Industrial Dust Extraction System with Automatic Filter Cleaning and Heat Recovery The DCV6500TC VIBER is a modern industrial dust extraction system designed for intensive operation in woodworking and manufacturing facilities. It combines high performance, quiet operation, and energy-saving technologies. The unit is equipped with the VIBER system (automatic filter cleaning), TC technology (sound-insulated head housing), REHEAT system (heat recovery), and DAMAGE PROTECT (mechanical rotor protection). Main Advantages of the Machine Automatic VIBER filter cleaning system – effective filter cleaning without interrupting operation. REHEAT heat recovery system – recovers heat from exhaust air and improves thermal comfort. DAMAGE PROTECT system – protects key components against mechanical damage. Fully enclosed TC housing – reduces noise and vibrations during operation. High efficiency of 6500 m³/h – effective dust extraction from multiple workstations simultaneously. Large waste container capacity – 500 litres, reducing the frequency of emptying. Design and Technology The DCV6500TC VIBER has been designed for maximum reliability and long-term operation. The robust steel construction minimizes vibration transfer, while the dynamically balanced metal rotor ensures quiet operation and system stability. The specially designed fan blade geometry improves extraction efficiency while reducing energy consumption. The TC housing with acoustic insulation effectively lowers noise levels in the production area. Precision and Work Efficiency The filtration system, based on 32 polyester filters, captures particles down to 5 microns in size. For even higher filtration efficiency, optional HEPA filters can be installed. Quick-access waste containers and intuitive control via the electrical control cabinet improve operator comfort and increase overall productivity. Applications The DCV6500TC VIBER is an industrial-grade central dust extraction system designed for cooperation with machines such as: sanding machines, panel saws, edge banders, milling machines. It is ideal for continuous operation in manufacturing plants where air quality and the reliability of the extraction system are essential. Standard Equipment VIBER system – automatic filter cleaning TC insulated housing for noise reduction Hjdpfxsuc U N Uo Ac Tot REHEAT heat recovery system DAMAGE PROTECT mechanical rotor protection Control cabinet with main switch Mobile waste containers with viewing windows – 2 × 250 L Optional Equipment HEPA filters Ceiling-mounted extraction system Additional suction pipes and connectors Technical Specifications Parameter Value Motor power S1 5.5 kW / 400 V, 50 Hz Motor speed 2900 rpm Extraction capacity 6500 m³/h Negative pressure 3000 Pa Noise level 80 dB Suction port diameter 280 mm Air velocity 28–32 m/s Filtration area 16 m² Filter material Polyester, 5 microns / filter category "G" Number of filters 32 Waste container capacity 2 × 250 L Dimensions (L × W × H) 2440 × 930 × 2270 mm Weight 440 kg

Condition: new, Year of construction: 2026, SCV15000TC VIBER BIG-BAG is a professional industrial dust extraction system designed for large woodworking facilities and industrial production lines. Equipped with two high-capacity BIG-BAG containers, it ensures maximum operational continuity and simplified handling while minimizing downtime. It is an ideal solution for extracting sawdust and dust from high-demand machinery requiring highly efficient air filtration. Key Advantages Capacity of 15,000 m³/h – ensures effective extraction even in the most demanding industrial applications 18.5 kW power output – high-efficiency S1-duty motor designed for continuous operation in harsh conditions VIBER system – automatic filter shaking system extending filter lifespan TC housing – fully sound-insulated enclosure reducing noise and vibration Two BIG-BAG containers – significantly increased waste capacity and more convenient unloading REHEAT – heat recovery system from exhaust air, reducing energy losses DAMAGE PROTECT – mechanical protection of the impeller and suction duct against damage caused by large objects Construction and Technology The SCV15000TC VIBER BIG-BAG is built on a rigid steel structure designed for intensive use in demanding industrial environments. The chip extraction fan features a dynamically balanced impeller with aerodynamically optimized blades, ensuring consistently high performance with low noise levels. The filtration unit consists of 117 polyester filter cartridges with a filtration surface area adapted to intensive dust extraction processes. Precision and Performance Thanks to high vacuum pressure and a large inlet diameter (400 mm), the extractor efficiently removes chips, dust, and sawdust from multiple workstations simultaneously. The design allows operation as a central extraction system, enabling full integration with an entire production line. High energy efficiency and the automatic filter cleaning system significantly reduce the need for frequent servicing, lowering operating costs. Applications Hodpeup Difefx Ac Tst The SCV15000TC VIBER BIG-BAG is recommended for operation with: panel saws and sliding table saws wide belt sanders edge banders and CNC milling machines automated woodworking and wood-based material processing lines Standard Equipment VIBER automatic filter cleaning system Polyester filters (117 pcs) TC sound-insulated housing DAMAGE PROTECT protection system Control cabinet with main switch Two BIG-BAG containers with support frames Optional Equipment HEPA filters for particles below 5 microns Bag fill level sensor Automatic shut-off valve Spark detection and fire suppression system Technical Specifications Power supply voltage: 400 V Motor power: 18.5 kW Rotational speed: 3000 rpm Filter type: Polyester, 5 microns / filter category “G” Filter dimensions: Ø160 × 960 mm Filtration area: 59 m² Number of filters: 117 pcs Inlet diameter: 400 mm Capacity: 15,000 m³/h Vacuum pressure: 3000 Pa Air velocity: 40 m/s Noise level: 80 dB Number of BIG-BAGs: 2 pcs BIG-BAG capacity: 1250 L each / 2500 L total Dimensions (L × W × H): 3850 × 1500 × 3800 mm Weight: 1150 kg

Condition: new, Year of construction: 2026, The CORMAK ODL6K extraction and filtration system is a modern solution that provides safe working conditions for operators and effective protection of laser system components against contamination and damage. Filtration at a level of 99.9% removes harmful particles and fumes, guaranteeing clean air in the workplace. The ODL6K is distinguished by an automatic filter cleaning system, an efficient fan, and a compact, solid design that allows for easy integration with various cutting systems. An additional advantage is the ergonomic waste drawer, which allows for quick and convenient emptying of collected waste. This is a comprehensive solution that increases safety, improves work efficiency and extends the service life of laser systems. The ODL6K combines automatic filter cleaning with compressed air, an efficient fan generating high negative pressure and filtration at a level of 99.9% for particles of 0.3 μm thanks to the use of appropriate filters. The system is equipped with an ergonomic dirt drawer, which allows for quick and convenient removal of accumulated dust without the need for disassembly. Additionally, thanks to the modular design, it is possible to mount extraction nozzles on both the left and right side of the device, which allows for flexible adjustment of the installation to the layout of the production hall. ODL6K is a compact, efficient and reliable solution for any laser cutting system - increasing safety, comfort and work efficiency. The main functions of the exhaust gas extraction and filtration system in the laser processing process are: Removal and neutralization of laser smoke. Ensuring work safety at the laser station and in its immediate vicinity. Extending the service life of laser systems by keeping them clean and protecting important components from contamination. The most important advantages of the CORMAK ODL6K extraction system: The extraction system has automatic filter cleaning using compressed air. Under the influence of pressure, the filter is "shaken off", which effectively cleans the filter cartridge and thus extends its service life. Thanks to this, the system maintains its efficiency for a longer period of time. The filter element used in the system is imported and made of high-quality material. The Nano-type fireproof filter has high filtration efficiency, retaining particles of 0.3 μm in more than 99.9%. The large dust collection drawer allows convenient dust collection and cleaning, which makes the system easy to maintain. The motors used in the system are equipped with overload protection, thus ensuring a high level of protection and trouble-free operation. The specially developed high-performance fan wheel generates a large negative pressure, which allows effective removal of laser exhaust gas and ensures high airflow efficiency. The total purification efficiency of the system is 0.3 μm, and the efficiency is more than 99.9%, which shows the high efficiency of the exhaust in removing harmful particles from the air. In addition, it is characterized by a compact structure, which makes it easy to operate and maintain. Technical parameters Number of filter cartridges 6 Air flow 6000 m³/h Hsdpfx Acswcd I Ro Tjt Air pressure 3000 Pa Filtration efficiency 99.99% Filter size 350x660 mm Fan power 7.5 kW Inlet diameter 300 mm Weight 590 kg Dimensions (L x W x H) 1150 x 1950 x 2250 mm

Condition: new, Year of construction: 2026, The CORMAK ODL4K extraction and filtration system is a modern solution that ensures safe working conditions for operators and effective protection of laser system components against contamination and damage. Filtration at a level of 99.9% removes harmful particles and fumes, guaranteeing clean air in the workplace. Hjdpfjwcdrvjx Ac Tot ODL4K stands out with an automatic filter cleaning system, an efficient fan, and a compact, solid design that allows for easy integration with various cutting systems. An additional advantage is the ergonomic waste drawer, which allows for quick and convenient emptying of collected waste. The modern ODL4K extraction system ensures effective filtration of contaminants and protection of the most important components of the laser system. ODL4K combines automatic filter cleaning with compressed air, an efficient fan generating high negative pressure and filtration at a level of 99.9% for particles of 0.3 μm thanks to the use of appropriate filters. The system is equipped with an ergonomic dirt drawer, which allows for quick and convenient removal of accumulated dust without the need for disassembly. Additionally, thanks to the modular design, it is possible to mount extraction nozzles on both the left and right side of the device, which allows for flexible adjustment of the installation to the layout of the production hall. ODL4K is a compact, efficient and reliable solution for any laser cutting system - increasing safety, comfort and work efficiency. The main functions of the exhaust gas extraction and filtration system in the laser processing process are: Removal and neutralization of laser smoke. Ensuring work safety at the laser station and in its immediate vicinity. Extending the service life of laser systems by keeping them clean and protecting important components from contamination. The most important advantages of the CORMAK ODL4K extraction system: The extraction system has automatic filter cleaning using compressed air. Under the influence of pressure, the filter is "shaken off", which effectively cleans the filter cartridge and thus extends its service life. Thanks to this, the system maintains its efficiency for a longer period of time. The filter element used in the system is imported and made of high-quality material. The Nano-type fire-resistant filter has high filtration efficiency, retaining particles of 0.3 μm in more than 99.9%. The large dust collection drawer allows convenient collection and cleaning of dust, which makes the system easy to maintain. The motors used in the system are equipped with overload protection, thus ensuring a high level of protection and trouble-free operation. The specially developed high-performance fan wheel generates a large negative pressure, which allows effective removal of laser exhaust gas and ensures high airflow efficiency. The total purification efficiency of the system is 0.3 μm, and the efficiency is more than 99.9%, which shows the high efficiency of the exhaust in removing harmful particles from the air. In addition, it is characterized by a compact structure, which makes it easy to operate and maintain. Technical parameters: Number of filter cartridges 4 Air flow 4000 m³/h Air pressure 3000 Pa Filtration efficiency 99.99% Filter size 350x660 mm Fan power 5.5 kW Inlet diameter 250 mm Weight 420 kg Dimensions (L x W x H) 1050 x 1400 x 2250 mm

Condition: good (used), Year of construction: 1990, functionality: fully functional, Extraction system/bag filter, type 244300 NAsf 4/3, year of manufacture 1990, equipped with new fan blades. Fan is flange-mounted, filter area approx. 26 m², with 4 bags. 3 kW. Machine subject to differential VAT. Hsdpexf H Ayjfx Ac Tet

Year of construction: 2022, operating hours: 427 h, condition: like new (used), functionality: fully functional, The extraction unit is from 2022 and has only 427 operating hours. It is therefore immediately ready for use and in excellent condition—see pictures. The price is gross (3,500 EUR net); you will receive an invoice with VAT shown separately. The mobile LOCTITE extraction system LAS 250 is a key component for health and environmental protection at the workplace. Molecules released by adhesives in their liquid phase are captured directly at the workstation, cleaned by the extraction unit via a special activated carbon filter system, and then the purified air is returned to the workspace. This reliably prevents air pollution in the work area and ensures compliance with workplace air quality regulations. Thanks to its low weight and mobility, the LOCTITE extraction system can be easily transported to different workstations. Features: - Special fan with high pressure reserve - Adjustable flow volume control - Suitable for up to 4 workstations - Filter combination with special activated carbon Hsdpfxsxy Spzs Ac Tet - Filter cartridges are recycled upon return - Built-in operating hour counter to monitor filter element life

Condition: used, Extraction system, central extraction, room air filter system, ETS Efficient Technical Solutions GmbH Central welding fume extraction system Year of manufacture approx. 2005 Volume flow rate approx. 5000 m³/h Extraction connection at the filter inlet 1200 x 150 mm Exhaust connection at the filter outlet 400 x 300 mm Motor power 10 kW Mains connection 400 volts, 50 Hz Hjdpfx Acjicic Hj Tet - Control cabinet for wall mounting - Bag filter - Maintenance flap for filter replacement - Radial fan on top of the system Space requirement L x W x H 2000 x 1650 x 3650 mm Transport height without fan 3100 mm Weight approx. 2000 kg Very good condition

Condition: used, Welding fume extraction unit for wall mounting, KEMPER extraction device Type 85400 Serial number: 279092 Year of manufacture: 1997 Volume flow: 1700 m3/h Static pressure: 2000 Pa Extraction connection: Ø 250 mm Motor power: 1.5 kW Power supply: 400 Volts, 50 Hz - Radial fan - Designed for a mechanical air filter with approx. 99% separation efficiency - Main filter defective (surcharge for new main filter: EUR 195 net) - Articulated extraction arm Ø 150 mm, approx. 2 meters long - Extraction pipe with 3 joints and extraction hood (adapter connection to filter housing missing) Hodpfsu S Tfgsx Ac Tet - No external control unit, without filter monitoring, without start switch - Air outlet: 250 x 140 mm Required space (L x W x H): 680 x 660 x 1100 mm Weight: approx. 120 kg Good condition Surcharge for new main filter: EUR 195 net

Condition: used, Year of construction: 2016, operating hours: 16,859 h, type of input current: three-phase, suction capacity: 5,000 m³/h, filter area: 80 m², NOVUS AirTower Filter Ventilation Tower, 5,000 m³/h. Industrial filter ventilation for welding halls — designed for a variety of technological processes in production plants, primarily for metalworking. Top-mounted air intake and draft-free air discharge at floor level — directly to workstations. Layered filter ventilation principle; the unit does not require ductwork installation. Cartridge filter elements — self-cleaning via compressed air pulses during operation. Filter cleaning by differential pressure — no compressed air loss. Layered ventilation principle: contaminated air is drawn in from above, filtered, and then released at floor level as clean, breathable air without causing drafts, at a velocity below 1.2 m/s, precisely where workers breathe. Covers a broad 270-degree area. The tower operates on the layered ventilation principle, recommended by trade associations and considered the most effective form of air circulation. Year of manufacture: 2016 Operating hours: 16,859 h Specifications: - 3.9 kW EC fan - Capacity: 5,000 m³/h - Filter surface area: 80 m² - Filter cartridges: 4 pcs - Additional high-efficiency final filter (F9 filtration class) provides increased air cleaning performance and additional protection for the fan in case of main filter failure. - 100 l dust collection drawer - Very quiet operation: 75 dB(A) - Filtration efficiency: > 99.6% Hodpfx Ajyq Nl Njc Tot - Stock No.: 1109

Condition: good (used), Year of construction: 2009, Dust extraction,filtration,welding fume extraction,self-cleaning cartridge filter,pneumatic,vacuum TEKA AIRTECH P24 The main areas of application for the systems are industrial plants/welding shops where it is where it is not possible to realize spot extraction point extraction or where point extraction is not sufficient to maintain clean air on the shop floor. Side-mounted ducts with point capture point sucks in contaminated air air and lead it to the filter section. Here, contaminants in the form of fine particles cover the surface of the filter patron filter. An administered pulse of compressed air cleans the cartridge filters, automatically at the required intervals. After the impact of the compressed air, the particles collected on the surface of the filters break off off and fall into the dust tank. The cleaned air is returned to the work room through individually adjusted long-range nozzles. At the same time ejection of the purified air directs the contaminated air of the hall towards the toward the extraction channels. Filter cleaned by microprocessor controller with compressed air pulses during operation, thus high efficiency of the device. Low demand for compressed air thanks to the system "Power-Spray" The AIRTECH unit series is certified by IFA in accordance with EN ISO 15012- 1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as a permanent local extraction device of welding fumes. Parameters: Capacity - 24 000 m3/h Motor power - 15 Kw Hodpol Dw U Dsfx Ac Tjt Fan in sound-absorbing housing Control cabinet with electrical documentation Year of production - 2009 Dimensions: Height - 6.80 m Base width - 1.95 m x 1.90 m Total width - 3.60 m x 2.00 m We have several pieces on offer. The price given in the ad for 1 piece.

Condition: good (used), Year of construction: 2010, Dust extraction, filter ventilation, welding fume extraction, self-cleaning cartridge filter, pneumatic, vacuum TEKA AIRTECH P18. The main areas of application for these systems are industrial plants/welding shops where it is not possible to implement point extraction or where point extraction is insufficient to maintain air quality in the workshop. Side-mounted ducts with a pollution capture point draw in contaminated air and direct it to the filter section. Here, pollutants in the form of fine particles accumulate on the surface of the cartridge filter. Compressed air pulses clean the cartridge filters automatically at required intervals. After the compressed air hits, the particles collected on the filter surface detach and fall into the dust collection tank. The cleaned air returns to the work area through individually adjustable long-range nozzles. At the same time, the discharge of the cleaned air directs the contaminated air in the workshop towards the extraction ducts. The filter is cleaned by a microprocessor controller with compressed air pulses during operation, which results in high device efficiency. Low compressed air consumption thanks to the "Power-Spray" system. The AIRTECH series of devices is certified by IFA in accordance with EN ISO 15012-1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as a permanent, local welding fume extraction unit. Parameters: Capacity - 18,000 m3/h Motor power - 11 kW Vacuum - 2250 Pa Filtration area - 324 m2 (9 filter cartridges, each 36 m2) Fan in a sound-absorbing housing Control cabinet with electrical documentation Noise level - 72 dB Year of manufacture - 2010 Dimensions: Height - 5.00 m Base width - 1.44 m x 1.44 m Width with outlet ducts - 8.5 m Total weight approximately 2400 kg Hsdpfx Aceib Dade Tot

Year of construction: 2014, condition: excellent (used), Professional, pneumatic cleaning booth with dust extraction. It is used in power plants, cement and gypsum factories, mills, and companies involved in mixing, including the chemical industry, as well as in metallurgy, where dust can have a very negative impact on the health of personnel. By using cleaning booths, we prevent the spread of dust and hazardous substances to restrooms, changing rooms, etc. The booth provides personnel with a simple option to clean themselves during work, e.g., before morning and lunchtime breaks, and at the end of the shift. Dust extraction unit, EX version. Year of manufacture: 2014 Filtration area: 16 m2 Capacity: 2500 m3/h Hodpehm E S Aofx Ac Tjt Negative pressure: 2400 Pa The unit is in very good condition.

Condition: good (used), Year of construction: 2004, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, intake manifold diameter: 350 mm, year of last overhaul: 2020, Equipment: CE marking, documentation/manual, Schuko Intermediate Filter System “Eco Var 04” Professional dust extraction system Schuko Eco-Var 04 (year of manufacture 2004) – complete system including piping, control system, and emission permit. For sale is a powerful and fully functional industrial dust extraction system from the premium manufacturer Schuko, type Eco Var 04 (year of manufacture 2004). The system is ideally suited for woodworking companies for efficient extraction of chips and dust and is offered including an extensive pipe and control system infrastructure. Technical data & equipment • Manufacturer: Schuko Hsdpfx Aszddwgsc Tst • Model series: Eco Var 04 (intermediate filter system) • Year of manufacture: 2004 • Drive power: approx. 11 kW (powerful, efficient fan) • Discharge: Rotary valve airlock with 5 sealing lips (ensures safe, pressure-loss-free material discharge into containers, silos, or briquetting presses) Extensive accessories & infrastructure (included) • Pneumatic valves: approx. 20 units for automatic shut-off of individual machine connections. • Pipe & hose system: approx. 80 meters of robust extraction pipe including the corresponding flexible hoses. • Pneumatic infrastructure: compressed air connections including all associated pneumatic hoses for valve control. Product advantages & condition • Complete package: No tedious searching for individual parts – from the filter system to the piping and the complete control and pneumatic system, everything is available for workshop installation. • Robust industrial quality: The Eco-Var series from Schuko is known for its durability, high filter area, and reliability in daily workshop use. • Energy-efficient: Thanks to the approx. 20 pneumatic valves, the extraction performance is only provided where work is currently being carried out, which saves a lot of energy. Note for buyers: The system is in a well-maintained and fully functional condition, appropriate for its age. Inspection can be arranged.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 2007.10.191, grinding width: 1,350 mm, grinding belt length: 4,800 mm, workpiece height (max.): 150 mm, grinding belt width: 1,400 mm, Sanding Machine + Dust Extraction Unit TECHNICAL DETAILS Sanding width: 1,350 mm Working height: 880 mm Workpiece thickness: 3 - 150 mm Transport bed: continuous conveyor belt Transport bed drive: 4.0 kW / frequency converter 7.5 kW Feed speed: 3 – 15 m/min Drive, workpiece suction clamping system: 7.5 kW Units: 3 x cross, 1 x longitudinal, 1 x brush Cross and longitudinal sanding units Cross sanding unit – sanding belt dimensions: 4,800 x 150 mm Belt speed: 2–20 m/s Drive power per cross sanding unit: 15 kW Pressure lamella belt dimensions cross sanding: 4,350 x 140 mm Longitudinal sanding unit – sanding belt dimensions: 2,620 x 1,400 mm Belt speed longitudinal sanding: 1.8 – 16 m/s Drive power longitudinal sanding: 15 kW Pressure lamella belt dimensions longitudinal sanding: 1,900 x 1,380 mm Brushing unit Brush roller diameter: 120 mm Drive power: 0.75 kW Air requirement Air requirement, cross sanding units: 91.5 m³/min Air requirement, longitudinal sanding unit: 30.5 m³/min Hsdpjyg Exqefx Ac Tet Air requirement, brushing system: 18.0 m³/min Air requirement, conveyor belt extraction: 13.5 m³/min Air exhaust, workpiece suction clamping system: 40.0 m³/min Total air requirement: 193.5 m³/min Total compressed air consumption: 115 m³/h MACHINE DETAILS Total connected load: approx. 80 kW Operating voltage: 400 V Frequency: 50 Hz Main machine dimensions Dimensions (L x W x H): 2,900 x 2,300 x 2,200 mm Weight: approx. 7,000 kg Dust Extraction Unit EA 8 – Machine No.: 2007.10.192 Sanding width: 1,350 mm Working height: 880 – 920 mm Workpiece thickness: 3–150 mm Required air speed: 20 m/s Air requirement: 30.5 m³/min Transport bed drive: 1.1 kW / frequency converter 2.2 kW / 0.75 kW Feed speed: 3–15 m/min Fan drive: 5.5 kW Drive, height adjustment: 0.18 kW Power connection: 7.0 kW Dimensions (L x W x H): 1,100 x 2,200 x 2,200 mm Weight: 1,900 kg EQUIPMENT - Operator terminal - Dust extraction unit EA 8 - Workpiece suction clamping system - Several cross and longitudinal sanding units - Brushing unit

Condition: used, Year of construction: 2018, functionality: fully functional, overall weight: 250 kg, Grinding table, model NESTRO, with 2 suction cups, year of manufacture 2018, in new condition. Hsdpfx Acexltruo Tet

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, filter area: 160 m², Equipment: documentation/manual, NESTRO Extraction System Year 2022 – Modern Industrial Installation – Top Condition NESTRO Extraction Jet NFHSU 11125, 160 m² filter area, incl. 2x electric diverter valves, excl. spark extinguishing system, year 2022 Description For sale is a high-quality, modern extraction system from NESTRO Lufttechnik GmbH, built in 2022. The system comes from an industrial environment and is accordingly in a very good, well-maintained condition. Thanks to its recent year of manufacture, it offers the latest technology, high energy efficiency, and state-of-the-art control components. 👉 Ideal for joineries, woodworking, manufacturing businesses, and industrial applications where dust and chips are generated. Key Technical Data (Excerpt) Manufacturer: NESTRO Lufttechnik GmbH Year of manufacture: 2022 Duct diameter: Ø 300 mm Electric diverter valves included Motor power diverter valve: 0.12 kW Operating voltage: 400 V Frequency: 50 Hz Robust industrial design Scope of delivery - Filter plant / filter housing - Fan / negative pressure fan - Control system (incl. modern control components) - Piping and components (as per inventory) - Diverter valves - Steel structure / installation Condition ✔ Year 2022 – very modern condition ✔ The system has been in use and is proven ✔ Well-maintained overall system ✔ Inspection possible any time Special Features ✔ Very recent year of manufacture ✔ Premium manufacturer (NESTRO) ✔ Modern control technology ✔ Energy-efficient and future-proof ✔ Significantly cheaper than comparable new equipment ✔ Ideal for rapid integration into existing operations Important Notes Sale is made in the current condition Dismantling and loading by purchaser Support for dismantling can be organized upon request Sale without warranty Condition / Warranty The machine offered is sold as used equipment. The sale is under exclusion of any liability for material defects. The machine is sold as inspected and without any warranty. The seller does not guarantee functionality, performance, or suitability for any particular purpose. Disclaimer Any liability for material defects is excluded. This does not apply to damages resulting from injury to life, body or health, or to grossly negligent or intentional behavior by the seller. Dismantling and Transport Dismantling of the machine is the responsibility of the buyer at their own expense and risk. The buyer bears all costs and risks associated with dismantling, loading, and transport. Transfer of Risk Risk passes to the buyer at the latest when dismantling or loading begins. Hedjywfl Hjpfx Ac Tst Other Provisions No liability is accepted for hidden defects. All information on the machine (e.g. year of manufacture, operating hours, technical data) is given to the best of our knowledge but without guarantee.

Condition: ready for operation (used), Year of construction: 1997, machine/vehicle number: RS 110-6-2 TF, functionality: fully functional, filter area: 660 m², total height: 10,400 mm, total length: 9,200 mm, total width: 2,500 mm, overall weight: 9,000 kg, Equipment: documentation/manual, Industrial Extraction System Venti Oelde, Spülluftfilter RS 110-6-2 TF, High-Performance System Airflow approx. 87,500 m³/h, 660 m² filtration area, year of manufacture 1997, incl. 3 high-performance fans, incl. ductwork, incl. air recirculation for approx. 70,000 m³/h, excl. spark extinguishing system. For sale is a powerful industrial extraction system by Venti Oelde, designed for an airflow of approx. 87,500 m³/h. The system has been in continuous operation and is suitable for use in larger industrial applications (e.g., wood processing, furniture manufacturing, operations with high chip and dust volumes). 👉 This is a complete central extraction system, not a standalone unit! Key Technical Data (excerpt) - Airflow: approx. 87,500 m³/h - Configuration: Central extraction - Year of manufacture: approx. 1997 - Application area: Industry / continuous duty - Robust steel construction - Built for heavy-duty continuous operation Scope of Delivery Hsdpfxoywflas Ac Tjt - Filtration system - Fans - Ductwork - Air recirculation unit - Steel frame / support structure Condition - System was operational until recently - Used, age-related, but solid industrial build quality - Inspection is explicitly encouraged Special Features - Very high air capacity – ideal for large-scale production facilities - Immediately available – no long lead times as with new systems - Heavy-duty construction – durable industrial technology - Attractive alternative to costly new installations - Dismantling support can be organized at extra cost!!!! The offered machine is sold as a used system. Sale is conducted with exclusion of any liability for material defects. The machine is sold as inspected and excluding any warranties. The seller accepts no guarantee regarding the functionality, performance, or suitability for any particular purpose. Disclaimer All liability for material defects is excluded. This does not apply to damages arising from injury to life, body, or health, or in cases of intentional or grossly negligent conduct by the seller. Dismantling and Transport Dismantling of the system is to be undertaken by the buyer at their own risk and expense. The buyer is responsible for all costs and risks associated with dismantling, loading, and transport. Transfer of Risk The risk passes to the buyer at the latest upon commencement of dismantling and/or loading. Other Information No liability is accepted for hidden defects. All information regarding the machine (e.g., year of manufacture, operating hours, technical data) is given to the best of our knowledge but without guarantee.

Condition: used, power: 1.1 kW (1.50 HP), input voltage: 380 V, volume flow: 2,000 m³/h, intake manifold diameter: 140 mm, filter area: 1.65 m², total height: 1,900 mm, total length: 1,100 mm, total width: 650 mm, overall weight: 50 kg, extraction connection diameter: 140 mm, nominal flow rate: 2,000 m³/h, negative pressure: 1,800 Pa, nominal power: 1.1 kW (1.50 HP), space requirement height: 1,900 mm, space requirement length: 1,100 mm, space requirement width: 650 mm, transport length: 1,100 mm, transport width: 650 mm, transport height: 1,900 mm, No. 3258 Mobile extraction unit / mobile dust extractor Scheppach HA 3200 Used For extracting wood shavings, milling chips, sawdust and sanding dust Motor 1.1 kW, 380 V Air output 2000 m3/h Hsdpfxsx Hi Rxj Ac Tot Pressure difference max. 1800 Pa Extraction connection diameter 140 mm Impeller diameter 320 mm Special filter diameter 500 mm, height 800 mm Filter surface 1.65 m2 Extraction unit mobile with 2 swivel castors Transport dimensions approx. 1100 x 650 x 1900 mm LWH Weight approx. 50 kg Sale on behalf of customer, ex location near 73430 Aalen, without dismantling, without transport and assembly Dismantling, loading and transport by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: used, No. 04491 Mobile extraction unit / Mobile dust extractor ESTA Dustomat HMS 10 WN Used For extracting wood dust and chips Filter type H2 for wood dust, residual dust content level 2, 0.2 mg/m3 Type 1, for extracting combustible dusts of dust explosion classes St 1 and St 2 400 V, 1.1 kW, with power cable and plug Nominal air volume flow 720 m3/h Filter area 3.5 m2 Extraction pipe connection diameter 100 mm Filter cleaning by hand crank Chip container 670 x 460 mm Mobile unit CE-compliant Transport dimensions approx. 1300 x 550 x 1700 mm LWH Weight approx. 100 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Hedpfxjxnqauj Ac Tjt Terms of delivery: ex warehouse

Condition: used, Year of construction: 2021, overall weight: 200 kg, input voltage: 400 V, total width: 800 mm, total length: 1,300 mm, total height: 1,600 mm, volume flow: 216 m³/h, space requirement height: 1,600 mm, space requirement width: 800 mm, space requirement length: 1,300 mm, filter area: 2 m², negative pressure: 31,500 Pa, power: 3 kW (4.08 HP), transport height: 1,600 mm, transport length: 1,300 mm, transport width: 800 mm, tank capacity: 80 l, No. 04519 Mobile extraction unit / mobile dust extractor ESTA WHISPERSOG 3.0 FM Unused, year of construction 2021, in new condition Hjdpfxsyibg Te Ac Tot Industrial vacuum cleaner for cleaning work and machine extraction The WHISPERSOG high vacuum cleaners work more quietly than conventional industrial vacuum cleaners with the same performance. They are designed for continuous operation and can be used not only as industrial vacuum cleaners, but also as mobile dust extractors for direct extraction on machines. By using permanent filter cartridges, operating costs can be significantly reduced compared to disposable filters. The dust produced can be easily disposed of using the patented tipping device. Areas of application: Removal of coarse, fine and free-flowing dust during cleaning work / Direct extraction of machines in continuous operation Motor power 3 kW Electrical connection 400 V Maximum negative pressure 31500 Pa Maximum air volume flow 216 m3/h Extraction nozzle diameter 50 mm Filter surface 2m2 Dust collection container 80 liters Potential-free contact for automatic activation when machine is started Including electrical connection cable with 16 A plug, 10 waste bags and technical documentation Transport dimensions approx. 1300 x 800 x 1600 mm LWH Weight approx. 200 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: used, No. 04490 Mobile extraction unit / Mobile dust extractor ESTA Dustomat 10 Used For extracting wood dust and chips Filter type H2 for wood dust, residual dust content level 2, 0.2 mg/m3 Type 1, for extracting combustible dusts of dust explosion classes St 1 and St 2 400 V, 1.1 kW, with power cable and plug Nominal air volume flow 720 m3/h Hodpfxjxn Tilj Ac Tst Filter area 3.5 m2 Extraction pipe connection diameter 100 mm Filter cleaning by hand crank Chip container 670 x 460 mm Mobile unit CE-compliant Transport dimensions approx. 1300 x 600 x 1700 mm LWH Weight approx. 100 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: used, No. 04489 Mobile extraction unit / Mobile dust extractor ESTA Dustomat 61 Hsdpfjxnprcjx Ac Tot Used For extracting wood dust and chips Filter type H2 for wood dust, residual dust content level 2, 0.2 mg/m3 Type 1, for extracting combustible dusts in zone 22 400 V, 3 kW, with power cable and plug Nominal air volume flow 1850 m3/h Extraction pipe connection diameter 160 mm Filter surface area 9.6 m2 Filter cleaning by hand crank Filter dimensions approx. 720 x 510 mm Chip container 860 x 570 mm Mobile unit CE-compliant Including new replacement filter Operating instructions available Transport dimensions approx. 1700 x 800 x 2100 mm LWH Weight approx. 250 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: used, Year of construction: 2021, overall weight: 200 kg, input voltage: 400 V, total width: 800 mm, total length: 1,350 mm, total height: 1,500 mm, volume flow: 216 m³/h, space requirement height: 1,500 mm, space requirement width: 800 mm, space requirement length: 1,350 mm, filter area: 2 m², negative pressure: 31,500 Pa, power: 3 kW (4.08 HP), transport height: 1,500 mm, transport length: 1,350 mm, transport width: 800 mm, tank capacity: 80 l, No. 04520 Mobile extraction unit / mobile dust extractor ESTA WHISPERSOG 3.0 FM Unused, year of construction 2021, in new condition Industrial vacuum cleaner for cleaning work and machine extraction The WHISPERSOG high vacuum cleaners work more quietly than conventional industrial vacuum cleaners with the same performance. They are designed for continuous operation and can be used not only as industrial vacuum cleaners, but also as mobile dust extractors for direct extraction on machines. By using permanent filter cartridges, operating costs can be significantly reduced compared to disposable filters. The dust produced can be easily disposed of using the patented tipping device. Areas of application: Removal of coarse, fine and free-flowing dust during cleaning work / Direct extraction of machines in continuous operation Motor power 3 kW Electrical connection 400 V Maximum negative pressure 31500 Pa Maximum air volume flow 216 m3/h Extraction nozzle diameter 50 mm Filter surface 2m2 Dust collection container 80 liters Potential-free contact for automatic activation when machine is started Including electrical connection cable with 16 A plug, 10 waste bags and technical documentation Transport dimensions approx. 1350 x 800 x 1500 mm LWH Weight approx. 200 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale Hsdpfxsylb Ixj Ac Tot For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse