Used Dust Extraction System for sale (37,043)

Condition: good (used), Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan -Dust extraction fan: radial fan -Motor: Dietz 3.0 kW 1420 rpm -Fan wheel: Ø 590 x 160 mm -Volume flow: m³/h -Dimensions: 790/710/H790 mm -Weight: 104 kg Nedpfxsv E D E No Aaaola

Condition: good (used), Year of construction: 1998, Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan -Dust extraction fan: Radial fan type -Motor: Loher 3.5 kW 955 rpm Ex protected -Volume flow: m³/h -Connection: inlet Ø 500 mm -Connection: Output 400 x 500 mm Nljdpfx Astz Hubsaaja -Dimensions: 1160/880/H950 mm -Weight: 153 kg

Condition: good (used), Year of construction: 1992, radial fan, dust extraction blower, fan, extraction, dust blower Nedpfxeb Rh U Ts Aaajla -Motor power: approx. 3 kW -Inlet connection: Ø 230 mm -Output connection: 335 x 290 mm -Impeller: Ø 340 mm -Dimensions: 540/580/H660 mm -Weight: 80 kg

Condition: good (used), Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan -Dust extraction fan: radial fan -Motor: Dietz 3.0 kW 1420 rpm -Fan wheel: Ø 600 x 240 mm -Volume flow: m³/h -Dimensions:790/700/H790mm -Weight: 97 kg Nedet Hy Ulspfx Aaajla

Condition: good (used), Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan, low pressure radial fan -Manufacturer: Dietz, low-pressure radial fan type DN 14 -Motor: Dietz 0.45 kW 2880 rpm Njdpfx Aasuncwxeajla -Volume flow: 19 m³/min -Connection: inlet Ø 130 mm -Connection: Output 110 x 110 mm -Protection class: IP56 -Dimensions: 380/300/H295 mm -Weight: 15.4 kg

Condition: used, Year of construction: 1991, Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan -Manufacturer: Novenco, dust extraction fan radial fan type CNA-400 REX / AZG-S -Engine: 1.35 kW 955 rpm -Volume flow: 5000 m³/h -Connection: inlet Ø 400 mm -Connection: Output 390 x 280 mm -Dimensions: 1030/590/H800mm -Weight: 70 kg Nedpfjtz Hu Ijx Aaaola

Condition: good (used), Year of construction: 1998, Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding smoke filter, welding smoke extraction, smoke gas extraction fan, filter system, cartridge dust extraction system Nlsdpfeu Uww Ssx Aaaea -Manufacturer: BTR Environmental, Unicell cartridge dust extraction system -Type: C16-2K7 -Extraction fan power: 3.0 kW -Inlet: Ø 220 mm -Individual components: see photos -Dimensions: 1210/1040/H2340 mm -Weight: 474 kg

Condition: used, Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan -Dust extraction fan: radial fan Nljdpjt Hy Ufsfx Aaasa -Motor: Loher 7.5 kW 1445 rpm -Volume flow: m³/h -Number: 2x fan available -Price per piece -Dimensions: 895/895/H865mm -Weight: 171 kg/pc.

Year of construction: 2000, condition: used, centrifugal fan, dust extraction fan, fan, suction, dust blower -Manufacturer: Rippert, centrifugal fan in soundproof housing -Type: HL560/710-200 -Motor: 5 kW 1435 rpm Nsdpolzmylofx Aaaola -Volume flow: 12,000 m³/h -Inlet/Outlet connection: Ø 500 mm, see photos -Dimensions: 1945/1515/H2350 mm -Weight: 600 kg

Condition: good (used), Year of construction: 1985, radial fan, dust extraction blower, fan, extraction, dust blower -Motor power: 0.4 kW -Speed: 1276 rpm -Total pressure: 260 Pa -Volume flow rate: 3200 m³/h -Inlet connection: Ø 400 mm -Outlet connection: 360/470 mm Nodpjcii N Ssfx Aaaela -Dimensions: 1130/560/H780 mm -Weight: 106 kg

Condition: like new (used), Year of construction: 2023, functionality: fully functional, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Nlsdpowydkasfx Aaaja Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: used, Year of construction: 2016, operating hours: 16,859 h, type of input current: three-phase, suction capacity: 5,000 m³/h, filter area: 80 m², NOVUS AirTower Filter Ventilation Tower, 5,000 m³/h. Industrial filter ventilation for welding halls — designed for a variety of technological processes in production plants, primarily for metalworking. Top-mounted air intake and draft-free air discharge at floor level — directly to workstations. Layered filter ventilation principle; the unit does not require ductwork installation. Cartridge filter elements — self-cleaning via compressed air pulses during operation. Filter cleaning by differential pressure — no compressed air loss. Layered ventilation principle: contaminated air is drawn in from above, filtered, and then released at floor level as clean, breathable air without causing drafts, at a velocity below 1.2 m/s, precisely where workers breathe. Covers a broad 270-degree area. The tower operates on the layered ventilation principle, recommended by trade associations and considered the most effective form of air circulation. Year of manufacture: 2016 Operating hours: 16,859 h Specifications: - 3.9 kW EC fan - Capacity: 5,000 m³/h - Filter surface area: 80 m² - Filter cartridges: 4 pcs - Additional high-efficiency final filter (F9 filtration class) provides increased air cleaning performance and additional protection for the fan in case of main filter failure. - 100 l dust collection drawer - Very quiet operation: 75 dB(A) Nlodpeyq Nl Nofx Aaasa - Filtration efficiency: > 99.6% - Stock No.: 1109

Condition: good (used), Year of construction: 2009, Dust extraction,filtration,welding fume extraction,self-cleaning cartridge filter,pneumatic,vacuum TEKA AIRTECH P24 The main areas of application for the systems are industrial plants/welding shops where it is where it is not possible to realize spot extraction point extraction or where point extraction is not sufficient to maintain clean air on the shop floor. Side-mounted ducts with point capture point sucks in contaminated air air and lead it to the filter section. Here, contaminants in the form of fine particles cover the surface of the filter patron filter. An administered pulse of compressed air cleans the cartridge filters, automatically at the required intervals. After the impact of the compressed air, the particles collected on the surface of the filters break off off and fall into the dust tank. The cleaned air is returned to the work room through individually adjusted long-range nozzles. At the same time ejection of the purified air directs the contaminated air of the hall towards the toward the extraction channels. Filter cleaned by microprocessor controller with compressed air pulses during operation, thus high efficiency of the device. Low demand for compressed air thanks to the system "Power-Spray" The AIRTECH unit series is certified by IFA in accordance with EN ISO 15012- 1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as a permanent local extraction device of welding fumes. Parameters: Capacity - 24 000 m3/h Motor power - 15 Kw Fan in sound-absorbing housing Control cabinet with electrical documentation Year of production - 2009 Dimensions: Height - 6.80 m Njdpfx Aasl Dw U Doaela Base width - 1.95 m x 1.90 m Total width - 3.60 m x 2.00 m We have several pieces on offer. The price given in the ad for 1 piece.

Condition: good (used), Year of construction: 2010, Dust extraction,filtering,welding fume extraction,self-cleaning patron filter,pneumatic,vacuum TEKA AIRTECH P18. The main areas of application for the systems are industrial plants/welding shops where it is where it is not possible to realize spot extraction point extraction or where point extraction is not sufficient to maintain clean air on the shop floor. Side-mounted ducts with point capture point sucks in contaminated air air and lead it to the filter section. Here, contaminants in the form of fine particles cover the surface of the filter patron filter. An administered pulse of compressed air cleans the cartridge filters, automatically at the required intervals. After the impact of the compressed air, the particles collected on the surface of the filters break off off and fall into the dust tank. The cleaned air is returned to the work room through individually adjusted long-range nozzles. At the same time ejection of the purified air directs the contaminated air of the hall towards the toward the extraction channels. Filter cleaned by microprocessor controller with compressed air pulses during operation, thus high efficiency of the device. Low demand for compressed air thanks to the system "Power-Spray" The AIRTECH unit series is certified by IFA in accordance with EN ISO 15012- 1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as a permanent local extraction device of welding fumes. Parameters: Capacity - 18 000 m3/h motor power - 11Kw vacuum - 2250 Pa Filtration area - 324 m2 ( 9 filter cartridges 36m2 each) Nljdpfx Ajib Dadoaaea Fan in sound-absorbing housing Control cabinet with electrical documentation Noise level - 72 dB Year of production - 2010 Dimensions: Height - 5.00m Base width - 1.44m x 1.44m Width with outlet channels - 8.5m Total weight about 2400 kg

Condition: good (used), radial fan, dust extraction blower, fan, extraction, dust blower, blower, exhaust fan -Manufacturer: Nedermans, Dust extraction blower exhaust fan 500725 Nlsdpfxohprg Ao Aaaoa -Motor: 0.37 kW 3000 rpm -Fan wheel: Ø 290 mm -Connection: Inlet Ø 130 mm -Connection: Output Ø 120 mm -Dimensions: 540/420/H520 mm -Weight: 24 kg

Condition: ready for operation (used), functionality: fully functional, Extraction unit 5.5 kW Nedpsyr Nhmofx Aaajla Power: 5.5 kW Filter bag cleaning system 36 filter bags Filter bag diameter: 160 mm Filter bag length: 2000 mm Option for air recirculation back into the workshop

Condition: good (used), Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, welding fume filter, welding fume extraction, flue gas suction fan -Manufacturer: Coral, dry grinding dust extraction filter system type GRINDEX Noderw A U Iepfx Aaaela -Power: 0.75 kW / 2810 rpm -Individual components/technical data: see photos -Dimensions: 855/750/H1085 mm -Weight: 120 kg

Condition: new, Year of construction: 2025, Technical data: ALKO clean air - mobile extraction unit, type Mobil-Power Unit APU 120, motor power 1.5 KW, intake Ø=120 mm, soundproofed, mobile dust garbage can 135 ltr, manual filter cleaning, dimensions: L= 1,085 mm, W= 650 mm, H= 1,985 mm, volume dust garbage can: 135 liters, weight: 117 kg, nominal volume flow (after cleaning): 814 m³ / h, Exhibition piece Nledpfscdy Ndox Aaasa At an absolute special price Location: From stock Bitburg

Condition: new, Year of construction: 2025, Exhibition piece- is sold at a special price Will be sold at a special price Technical data 300-P Intake manifold: 300 mm Nominal motor power: 7,5 kW / 3 Ph voltage: 400 V / 50 Hz max. volume flow: 6 000 m³ / h nominal volume flow: 5 089 m³ / h negative pressure: 2 280 Pa filter surface: 30 m² Nsdpfjcdy I Tsx Aaasla Spa collection volume: 3 x 250 L Dimensions (L / W / H) in mm: 2963 x 994 x 2346 Weight: 880 kg Special: unit is equipped with sound absorber - therefore extremely quiet - can be sold with or without Location: Ex stock 54634 Bitburg

Condition: as good as new (ex-display), Year of construction: 2025, IE 3 engine as standard maximum flow rate up to 10,000 m³/h to the fan about 73 m m² filter area Pre-filter as standard 71 dB (A) at full load (according to DIN EN ISO 11201) Certified according to GS-HO-07 H3 residual dust content 0,1 mg / m ³ safely complied (wood dust) Models with construction pattern tested rotary valves (FSA) Approved non-return valve Built-in automatic fire extinguishing system 350 + P Intake manifold 355 mm Rated motor power 15.0 kW/3Ph Voltage 400 V / 50 Hz maximum volume current 10,000 m³/h Nominal flow rate * 7.127 m³/h Depression at Vnom. 3.347 PA Nledjdqzhhopfx Aaaja Filter area 73 m² Chip collecting volume (net / gross) 3 x 165 L / 3 x 241 L Sound pressure level * 72 dB (A) Dimensions (L/W/H) in mm 3,112 x 1,058 x 2.361 Weight 1,074 kg

Condition: new, Year of construction: 2025, Chip extractor Nodpfxjhk S Sdo Aaaola ASA 2803 mobile, with 180° rotatable suction unit For milling, planing and sawing chips (not suitable for dust) 180° rotatable suction unit allows suction from below or above Sturdy metal fan wheel High-quality chassis as standard for better stability and easy manoeuvring Quick release fasteners for filter and chip bag Fine filter bag double woven Dimensions and weights Chip collection volume 2 x 120 l Nominal width outside suction nozzle inlet 203 mm Nominal width outside suction socket outlet 1 x 100, 2 x 120 mm Length approx. 1500 mm Width/depth approx. 500 mm Height approx. 2100 mm Weight approx. 53 kg Electrical data Idle speed 2950 min¯¹ Input power 2,2 kW Supply voltage 400 V Mains frequency 50 Hz Filter Filter area 2 x 1,92 m² Noise emission Sound pressure level max. 87.5 dB(A) Volume flow Nominal volume flow 2800 m³/h Negative pressure max. 1900 Pa Scope of delivery: Two filter bags, two chip bags. Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Chip extractor ASA 1903 mobile, with 180° rotatable suction unit For milling, planing and sawing chips (not suitable for dust) Nlsdpfx Aehk S Shjaaea 180° rotatable suction unit allows suction from below or above Sturdy metal fan wheel High-quality chassis as standard for better stability and easy manoeuvring Quick release fasteners for filter and chip bag Fine filter bag double woven Dimensions and weights Chip collection volume 110 l Nominal width outside suction nozzle inlet 203 mm Nominal width outside suction socket outlet 1 x 100, 1 x 120 mm Length approx. 1000 mm Width/depth approx. 500 mm Height approx. 2100 mm Weight approx. 39 kg Electrical data Idle speed 2950 min¯¹ Input power 1,5 kW Supply voltage 400 V Mains frequency 50 Hz Filter Filter area 1,92 m² Noise emission Sound pressure level max. 85.7 dB(A) Volume flow Nominal volume flow 1900 m³/h Negative pressure max. 1700 Pa Scope of delivery: Filter bag, chip bag Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Chip extractor ASA 4303 mobile, with 180° rotatable suction unit Nsdshk S Slspfx Aaaola For milling, planing and sawing chips (not suitable for dust) 180° rotatable suction unit allows suction from below or above Sturdy metal fan wheel High-quality chassis as standard for better stability and easy manoeuvring Quick release fasteners for filter and chip bag Fine filter bag double woven Dimensions and weights Chip collection volume 2 x 215 l Nominal width outside suction socket inlet 260 mm Nominal width outside suction socket outlet 2 x 100, 2 x 120 mm Length approx. 1700 mm Width/depth approx. 600 mm Height approx. 2400 mm Weight approx. 69 kg Electrical data Idle speed 2950 min¯¹ Input power 3,8 kW Supply voltage 400 V Mains frequency 50 Hz Filter Filter area 2 x 2,4 m² Noise emission Sound pressure level max. 89.9 dB(A) Volume flow Nominal volume flow 4300 m³/h Negative pressure max. 2000 Pa Scope of delivery: Two filter bags, two chip bags. Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Raw air extraction unit ASA 203 With standard undercarriage Dimensions and weights Chip collection volume 175 l Nominal width external suction inlet 200 mm Length approx. 1061 mm Width/depth approx. 577 mm Height approx. 2300 mm Weight approx. 60 kg Electrical data Supply voltage 400 V Mains frequency 50 Hz Filter Filter area 2.2 m² Noise emission Sound pressure level max. 84 dB(A) Volume flow Nominal volume flow 2500 m³/h For milling, planing and sawing chips (no dust) Substantially reduced dust content due to BIA-tested filter material with high separation efficiency Nledpfx Aajhk S Szsaea Housing parts and impellers made of high-strength special plastic Quick release fasteners for filter and chip bags for unproblematic maintenance Robust, high-quality design Easy to move due to swivel castors Low power consumption Suction units comply with dust class L Scope of delivery: System body with mounted fan unit Filter bag / extraction unit chip bag / extraction unit without suction hose

Condition: new, Year of construction: 2025, Raw air extraction unit ASA 163 With standard undercarriage Dimensions and weights Chip collection volume 175 l Nominal width outside suction socket inlet 160 mm Length approx. 1096 mm Width/depth approx. 648 mm Height approx. 2300 mm Weight approx. 40 kg Electrical data Supply voltage 400 V Mains frequency 50 Hz Filter Nledpjhk S S Ejfx Aaaoa Filter area 2.2 m² Noise emission Sound pressure level max. 83 dB(A) Volume flow Nominal volume flow 2200 m³/h For milling, planing and sawing chips (no dust) Substantially reduced dust content due to BIA-tested filter material with high separation efficiency Housing parts and impellers made of high-strength special plastic Quick release fasteners for filter and chip bags for unproblematic maintenance Robust, high-quality design Easy to move due to swivel castors Low power consumption Suction units comply with dust class L Scope of delivery: System body with mounted fan unit Filter bag / extraction unit chip bag / extraction unit without suction hose