Used Dry Channel for sale (3,481)

Condition: used, UV drying tunnel Manufacturer: Elmag Kodpfx Alez Dtytsdsnb Type: Ti166-35+2iVM1-65 Technical data - Equipped with 2 UV lamps - The year of manufacture is estimated to be around 2000. Note: The technical data and descriptions are taken from the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Throughfeed drying tunnel Manufacturer: Bürkle Technical data - with UV lamp - Year of manufacture estimated to be around 2000. Note: Knjdpfx Aez Dtyyeldsb The technical data and descriptions are transcriptions from the original order confirmation. The data is for informational purposes only and is not binding.

Condition: good (used), Year of construction: 2013, 1x Digicolor dryer, as shown in the pictures. Knedpfszx D H Aox Aldeb

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, power: 50 kW (67.98 HP), input voltage: 400 V, inner dimension length: 9,300 mm, inner dimension width: 220 mm, inner dimension height: 220 mm, overall weight: 11,000 kg, control type: NC control, fuel type: electric, Equipment: CE marking, documentation/manual, in zeer goede staat hoogfrequent vacuüm droger capaciteit 12,5 tot 13 m3 Knodpfx Asy Dr N Soldob vermogen HF output 50 kw bij een input van 70 Eva door te drogen onder vacuüm verlaagt het kookpunt van water vanaf 60 graden wat sneller drogen op lagere temperaturen mogelijk maakt

Year of construction: 2018, operating hours: 35,000 h, condition: used, functionality: fully functional, Description of fully automated dryer Major overhauling made by mid 2025 • The housing of the dryer is welded steel construction. The internal floor is made of perfored sheet board. The dryer has an external casing (walls and ceiling) in sandwich panel. • The dryer is driven by hydraulic power pack. • The dryer is equipped with “Ziehl Abegg”, MAXvent axial fans. It's propeller blades are made out of light casted material. One of the most energy efficient product on the market. Hot air generator is equipped with two “Geo Coil’’ heat exchangers. (fully functional but has bent fins) • The control system is equipped with a touch display for operation and visualization of the Dryer. Remote control via PC possible. Incl. web server on the panel for the visualization of drying processes via Ethernet interface. • Working mode according to air exit temperature. The rotational speed of the fans automatically adjusted by the frequency converters so that a desired air temperature level is maintained. Includes pressure measuring devices and extension of control system. • Dryer’s heat carrier temperature approx. 85°C flow temperature and approx. 65°C return temperature. Heat carrier flow defined as 176m³/h • Drying air ventilators equipped with frequency converters • Moisture sensors at the outlet of the dryer: YES • Adjustable height of drying bed: YES • Enlarged fuel receiving bin: Yes General specifications • Infeed material: Wood chips • Size of material: G100 • Water content infeed material max. 45% • Water content outfeed material 7-10% • Designed capacity outlet approx. 1.600 kg/h • Density (wet): 300 kg/m³ • Designed drying surface approx.: 97 m² • Designed climate conditions on site: Ambient temperature 0°C; relative humidity 70%, air pressure: 990 mbar • Noise pressure level, 75 dB, (1 m distance from air inlet port) Dryer fans, installed power: 74 kW Dryer hydraulic powerpack: 15 kW Knsdexc Eitepfx Aldeb

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, drying oven, tempering oven Caltherm 150 C For sale in excellent condition CALTHERM manufactured air mixing multi-purpose Convection oven heat treatment oven electric heated oven with one chamber, air mixing Max temp: 150°C internal dimensions: length: 200cm height: 200cm width: 100cm electronic heating elements 8pcs air circulation fan: 4kw 380v 50Hz temperature range: 50-160 Celsius Kedpfxjvpagdj Aldenb external dimensions:

Condition: used, functionality: fully functional, This is a drying and disinfection system for boots and shoes manufactured by PHT, type HYGIfeet M5. The Hygifeet drying and disinfection system is the innovative solution for all communal areas. The system stores shoes and boots after use and disinfects and dries them simultaneously. Disinfection is carried out safely using ozone, thus eliminating the need for chemicals. Simultaneous drying is achieved through warm air, ensuring a short drying time. The ozone-warm air mixture is only released at the valve heads when boots are placed on them. In addition, the valve heads are ergonomically designed for optimal air circulation. Warm, dry boots increase the well-being of your employees and prevent diseases through disinfection. The device has been tested in our in-house workshop and is fully functional. Manufacturer's recommended retail price: €2,721 net = €3,238 gross Our special price: €1,210 net = €1,439 gross OUR USED EQUIPMENT SERVICE FOR YOU: 6-month warranty on all electrical parts High-quality branded equipment at fair prices Professional overhaul/inspection & expert cleaning Tested & fully functional - or money back Flexible shipping or self-collection options Competent advice - before and after purchase Provision of operating instructions, connection diagrams & spare parts Inspection according to DGUV V3 TECHNICAL DATA: Knodpszxn Rfjfx Aldeb External dimensions WxDxH: 360x470x1950mm Electrical connection: 230V, 50Hz, 0.55kW Serial number: 2892/22-60623 Year of manufacture: 2022 Capacity: 5 pairs of shoes Condition: Used, tested and fully functional SHIPPING: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Do you have any questions, would like to request advice, or would like to see something on-site? You can reach us by phone during our opening hours: Monday to Friday from 9:00 a.m. to 1:00 p.m. and from 2:00 p.m. to 5:00 p.m. The sale is subject exclusively to our general terms and conditions (GTC).

Condition: used, Year of construction: 2017, Country of manufacture - Italy INSIDE DIMENSIONS (WIDTH X DEPTH X HEIGHT): 13.200 X 8.900 X 5.400 MM OUTSIDE DIMENSIONS (WIDTH X DEPTH X HEIGHT): 14.060 X 9.500 X 6.900 MM FAN MOTORS: 5,5 KW AT VARIABLE SPEED Kodpfxov Nkauo Aldjnb FAN MAXIMUM ELECTRIC POWER REQUIRED: 55 KW

Year of construction: 2014, condition: like new (used), fully automatic supply and exhaust 3 chambers Kedpfxjvzuuto Aldsnb chamber dimensions 6.5 x 4 x 4.1m furnace power 350kW

Condition: good (used), Year of construction: 2015, 1x Digicolor dryer, as shown in the pictures. Ksdpszx D Iasfx Aldonb

Condition: used, This listing is for a Grant Instruments QBD1 Digital Dry Block Heater. (1 of 2 available) The unit is in full working condition and is ready for immediate release. Discover the precision and efficiency of the Grant QBD1 Digital Dry Block Heater, designed to meet the rigorous demands of modern laboratories. This high-precision heating system offers exceptional temperature control, making it ideal for a variety of applications, including enzyme digestions, nucleic acid hybridizations, and general laboratory tasks. Key Features: Wide Temperature Range: Operates from ambient +5°C to 130°C, providing versatility for various heating needs. Single Block Position: Equipped with one removable and interchangeable block, allowing for easy customization based on your specific requirements. Digital Temperature Control: Enjoy precise temperature management with stability and uniformity of ±0.1°C, ensuring reliable results every time. Rapid Heat-Up Time: Quickly reaches your desired temperature, enhancing workflow efficiency in busy lab environments. Integral Timer Function: Optional external probe capability allows for accurate in-sample or in-block temperature monitoring. Technical Specifications: Dimensions: 200 x 240 x 120 mm (w x d x h) Robust and Compact Design: Features a contemporary design and includes a block extraction tool for safe and easy block removal. Benefits: High Precision: Achieve consistent and accurate heating for sensitive experiments. User-Friendly: The intuitive design ensures ease of use, making it suitable for both experienced and novice lab personnel. Kedpfoxv Az Hex Aldonb Durable Construction: Built to withstand the demands of daily laboratory use, ensuring long-lasting performance. Elevate your laboratory's capabilities with the Grant QBD1 Digital Dry Block Heater. Experience unmatched precision and reliability, making it an essential tool for any scientific setting.

Condition: as good as new (ex-display), Year of construction: 2022, overall weight: 68 kg, pressure: 10 bar, input voltage: 230 V, hose package length: 5,000 mm, CRYONOMIC COB62+ dry ice blaster. Demo machine used for presentations by the distributor in Poland, condition like new. Used for about 20 h of demonstrations. Included in the scope of supply: machine, 5m hose, gun with standard nozzle. Max. blasting pressure: 10 bar. Air consumption: 0,5 - 5,5 m3/min. Dry ice consumption: 20 - 80 kg. Possibility to use additional abrasive module for more aggresive cleaning with abrasive. Possibility to use LED gun light. Ksdpeq Rvaksfx Aldonb Simple and reliable operation and design backed by over 30 years of experience in manufacturing dry ice cleaning equipment. Manufactured in Belgium.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: Zsk 119 mc+, type of input current: three-phase, total length: 11,000 mm, year of last overhaul: 2024, total width: 1,500 mm, total height: 1,500 mm, overall weight: 18,000 kg, Coperion extruder, 1200 hp (930 kW), 380 volts, 50 Hz. Designed for high-moisture extrusion (TVP or HMMA, high-moisture meat analogue), with an output of 1 to 10 tons/hour. Knodszti Tkspfx Aldjb Screw diameter: 2 x 118 mm; ABB inverter for the 1200 hp motor; liquid dosing system; solid dosing system; control panel. Also available: Urchel cutting device and rotary IQF freezer. This extruder can also be used for dry or wet pet food. This equipment has very few operating hours.

Condition: used, Year of construction: 2016, // Equipment dismantled and stored in our warehouse // Manufacturer: Italvacuum Model: Cosmodry System IHD 3200 Year: 2016 Type: horizontal vacuum paddle dryer Application: drying wet powders ATEX (Eex) unit: yes Industries: Fine chemicals, pharmaceuticals (API), intermediates A) Agitation: Concentric agitator with heated shaft, removable in several segments (double mechanical seal) Transmission: (CEMP) - Power 30 kW + Gearbox + Chain Agitation speed: 1.6 ÷ 8.1 rpm Atex: explosion-proof ATEX II 2GD Mounted with the dryer on a support structure (single SKID) B) Drying chamber with discharge valve Total volume : 3200 Liters Useful volume : 30% - 80% Internal pressure : -1 / 0,5 barg Jacket pressure : 0 / 1,7 barg Project temperature : -10 / +130°C Maximum heating fluid temperature: +100°C Best vacuum tightness: 4 mbar/h EX-I absolute pressure transmitter PT100 Ex-i product temperature sensor Nitrogen backwash system Rotary chopper speed: 300 / 1200 rpm (not installed) Material in contact with the product: AISI 316L - EN 1.4404 Vacuum seals: PTFE and FEP Jacket material: AISI 304 - EN 1.4301 Heating fluid: Diathermic oil Mirror-polished interior finish (Ra ≤ 0.4 µm) Satin exterior finish (Ra ≤ 1.2 µm) Inspection and Shut-off Valve DN.1650 Buffer Relief Valve DN 200/300 DN 250 Butterfly Loading Valve Prepared for the installation of two choppers (lateral knives) C) Process filter D) Vacuum unit: SAURUS939 piston vacuum pump, model VVD Pump support bench ATEX: Ex-d-IIB-T4 – IP55 Power: 11 kW Atmospheric pressure surface condenser, model VD200I E) Vacuum condensing unit - AISI 316L stainless steel with double cooling jacket in AISI 304 stainless steel. Internal design pressure: -1 / 0.5 barg Jacket design pressure: 0 / 3 barg Design temperature: -10 / 40 °C Maximum cooling liquid pressure: 2.5 bar Exchange surface area: 8.5 m2 Condensate collection capacity: 900 litres Level sensor F) External safety filter G) Temperature control system: Heating/Cooling Steam liquid heater: Pressure 7 bar - Jacket temperature: 142°C - Surface area: 1.65 m2 Cooler, mounted on the heater: cold water or brine - Pipe jacket pressure: 12 barg - Jacket temperature: 142°C - Pipe temperature: -10°C /+ 99°C - Surface area: 3.42 m2 H) Command and Control System (Electrical Cabinet + HMI) Knodpfjx R D Efex Aldeb Complete technical file

Condition: used, Second-hand New eco-tec ALLin DRYer belt dryer for drying wood chips for the production of briquettes. Possible products: Separated fermentation substrate (fine-textured, air-permeable, frost-free, free from foreign matter, fully fermented; base material: maize silage, slurry, cereals, ≥30% dry matter) Knedpszzk H Uefx Aldob Wood chips G30 (free-flowing, air-permeable, frost-free, > 0°C, low in resin, free of coarse material, free of foreign matter) Technical data: - Heating medium: Hot water 90°C flow / 70°C return - Heating capacity: ~ 400 kW - Drying temperature: approx. 80 °C at 90° flow - Weight: ~ 12 t

Year of construction: 2010, operating hours: 4,000 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: N/A, Feature Details Rotor Diameter 500 mm Rotor Length 3000 mm Rotor Speed 1000 rpm Drive Power 18.5 kW Screen Hole Size Standard: 2.5 mm; Max: 3 mm Housing Material Stainless Steel Rotor Material Mild Steel Bearing Type Flange Bearing Throughput (HDPE) Up to 3.5 tonnes per hour Throughput (PET) Up to 3.5 tonnes per hour Ksdpfx Aswm I S Isldenb Throughput (LDPE) Up to 2 tonnes per hour • Inclined cylindrical trough design for efficient washing and transport • High-speed paddle rotor generates friction to clean contaminants • Replaceable screen with automatic rinsing/self-cleaning system • Water injection system for enhanced cleaning performance • Easy maintenance with accessible rotor and screen

Condition: ready for operation (used), Stork dry breader Knedpfx Aljykkkgodob No nameplate Belt width: 63 cm Dimensions: 300x130x180 cm

Condition: used, Year of construction: 2018, The Airtec ATC 7.5 Screw compressor and air dryer Heavy-duty industrial compressor. Specifications Year 2018 Motor Power: 7.5 KW (10HP) Maximum Pressure: 8 bar Knjdpozf Ivujfx Aldob Free air delivery 1.1 m3/min Tank Capacity Options: 500 Litres Power Requirements: 3-Phase Electric Pump Type: Belt-driven, cast-iron piston

Condition: used, This listing is for a Grant QBD1 Digital Dry Block Heater. The unit is in full working condition and is ready for immediate release. Discover the precision and efficiency of the Grant QBD1 Digital Dry Block Heater, designed to meet the rigorous demands of modern laboratories. This high-precision heating system offers exceptional temperature control, making it ideal for a variety of applications, including enzyme digestions, nucleic acid hybridizations, and general laboratory tasks. Key Features: Wide Temperature Range: Operates from ambient +5°C to 130°C, providing versatility for various heating needs. Single Block Position: Equipped with one removable and interchangeable block, allowing for easy customization based on your specific requirements. Digital Temperature Control: Enjoy precise temperature management with stability and uniformity of ±0.1°C, ensuring reliable results every time. Rapid Heat-Up Time: Quickly reaches your desired temperature, enhancing workflow efficiency in busy lab environments. Integral Timer Function: Optional external probe capability allows for accurate in-sample or in-block temperature monitoring. Technical Specifications: Knsdpfxjxv Dawe Aldeb Dimensions: 200 x 240 x 120 mm (w x d x h) Robust and Compact Design: Features a contemporary design and includes a block extraction tool for safe and easy block removal. Benefits: High Precision: Achieve consistent and accurate heating for sensitive experiments. User-Friendly: The intuitive design ensures ease of use, making it suitable for both experienced and novice lab personnel. Durable Construction: Built to withstand the demands of daily laboratory use, ensuring long-lasting performance. Elevate your laboratory's capabilities with the Grant QBD1 Digital Dry Block Heater. Experience unmatched precision and reliability, making it an essential tool for any scientific setting.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: PL071105402R, year of last overhaul: 2024, conveyor belt width: 122 mm, Equipment: documentation/manual, M&R dryer for plastisol and water-based inks in textile printing, with a large width of 122 cm. The dryer is in excellent condition and is electrically powered. Knjdpfx Alow Stp Ijdob The belt is wide enough to accommodate two rows of textiles side by side! We have already disassembled the dryer and prepared it for shipping. Therefore, there are no costs for disassembly. We will also take care of loading it onto the truck. We have a very reliable shipping company locally. The shipping costs depend on the destination. We recommend a direct shipment, which we can arrange!

Condition: excellent (used), Year of construction: 2004, machine/vehicle number: 87, functionality: fully functional, EBERL vacuum dryer, manufactured in 2004. Knjdjy Uc I Hepfx Aldob Underwent a major overhaul in 2024, performed by Eberl (purchased directly from Eberl). Fully operational, complete documentation available.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, cooling capacity: 800 kW (1,087.70 HP), overall weight: 4,500 kg, Equipment: compressor, freezer, Refrigeration machine with 2x dry coolers Cooling capacity: max 800 kW Number of cooling circuits: 2 Refrigerant type: R134A Voltage: 400 V Absorbed power: 176 kW Year of manufacture: 2009 2 Trane CHHP0N2TKG0N134A semi-hermetic screw compressors, Kodpfx Alerzq Arjdenb shell and tube as evaporator, 2x oil separators, Guentner GBV 200 Evaporator TRANE EG 340 evaporator water concentration 560 liters Control cabinet 1x air-cooled condenser machine weight: 4500kg With dry coolers 1x Güntner GWH 090.1D/5-M PT: 30.8 bar PS: 28 bar The specified cooling capacity is at a water outlet of +7°C at a condensing temperature of +40°C.

Condition: used, Used NIRO stainless steel spray dryer - N° 1405 - Tank Ø 800 x 600 mm - Cone Height 650 mm - Electric heating 9 kw - Fan 0.75 kw Ksdpfszcwnvex Aldjnb

Condition: used, Year of construction: 1996, functionality: fully functional, overall weight: 1,750 kg, total width: 1,120 mm, total length: 3,750 mm, number of chambers: 1, Equipment: documentation/manual, For sale: a high-performance fluid bed dryer from the renowned manufacturer Buhler, model OTWG-280. This is a horizontally constructed machine designed for the continuous thermal processing of bulk and granular materials. With its sectional design, the machine can function both as a dryer and a cooler, making it an extremely versatile element of any production line. The machine utilizes the principle of fluidization. The process involves blowing hot (or cold) air through a perforated base holding the raw material. The air lifts the material particles, forming a so-called "fluidized bed." In this state, each particle is surrounded on all sides by the heating/cooling medium, providing: Knedoy D Iiuopfx Aldjb - Instant heat exchange (significantly faster than drum dryers) - Uniform drying with no risk of localized overheating - Gentle product handling – minimal risk of mechanical damage to raw materials We have two OTWG 280 units and one OTWG 90 unit available. The price for the OTWG 280 is listed in the advertisement. OTWG 90 price: 40,000 EUR.

Condition: excellent (used), solid fuel furnace for supplying heat to the drying chamber. production of heating pellets. Knodpfx Alezn Au Rodsb capacity: 2.5 tons per hour.