Herbold Friction Washer

HERBOLD/chinese Range of Friction Washers/dryers

Condition: like new (used), Year of construction: 2020, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, total height: 3,000 mm, total width: 2,400 mm, total length: 6,000 mm, energy consumption: 35 kWh, Equipment: documentation/manual, Vacuum Evaporator – 57,000 L/Day | Industrial Wastewater and Process Water Treatment General Description The vacuum evaporator offered here (57,000 L/day) originates from a project for the treatment of process water and fermentation residues in a biogas producer consortium in southern France. The plant was fully installed but never commissioned and is in as-new, factory-preserved condition. It is immediately available. The evaporator is designed as a thermally efficient vacuum system and serves for the volume reduction, concentration, and recovery of water-containing liquid wastes. In combination with downstream reverse osmosis, it is ideal for applications requiring both clean distillate and highly concentrated nutrient or brine solutions. Technical Data (Evaporator 57,000) Type: Vacuum evaporator, thermally heated Manufacturer: Blue Water Plant Year of manufacture: 2020 Capacity: 57,000 L/day (approx. 2,400 L/h) Operating pressure: < 0.2 bar (vacuum mode) Heating medium: Hot water / steam Material: Stainless steel AISI 316 / 304 Control system: Siemens S7-1200 PLC with touch panel Energy consumption: approx. 45–55 kWh/m³ (depending on feed water) Condition: As new, factory preserved, unused Fields of Application • Biogas and digestate treatment – recovery of nitrogen concentrates • Landfill leachate treatment – reduction of wastewater volume • Chemical & pharmaceutical industry – process water treatment • Food industry – cleaning and reuse of rinse and process water • ZLD systems (Zero Liquid Discharge) – final stage concentrate evaporation Advantages • High thermal efficiency through vacuum operation • Robust stainless steel construction (AISI 316) for aggressive media • Fully automatic control (Siemens S7 + touch HMI) • Low maintenance, long-life components • Ideally compatible with RO systems (double pass integration) • Immediately available – optional refurbishment, acceptance testing & 1-year warranty Special Features • System was part of an integrated plant with SIMPEC RO 8000 44 8 • Never in operation, fully documented and preserved Iodpfswnbxdsx Ag Dsa • Location: Southern France (dismantling & transport by RIEFILT GmbH can be arranged) Price & Scope of Delivery Price: On request Scope of supply: Evaporator 57,000 + control system + documentation Optional: Refurbishment / Factory acceptance / 1-year warranty RIEFILT GmbH – Industrial Water Solutions

Condition: excellent (used), Year of construction: 2023, operating hours: 1,851 h, functionality: fully functional, pressing force: 70 t, filling opening width: 1,100 mm, filling opening length: 1,400 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 500 kg, overall weight: 17,000 kg, oil tank capacity: 70 l, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410 BS-22/50 Year of construction 2023 Pump operation hours 1,851 hours, as of July 24 Press power main press 70 t (a 70 tonne hydraulic cylinder is installed, special equipment) Specific press force 90,9 N/cm² (a 70 tonne hydraulic cylinder is installed, special equipment) Feed channel 1,400 x 1,000 mm Theoretic cycle time 13 sec Theoretic throughput capacity 266 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 22 kW Connected load 65 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 5,5 t/h bulk weight of 50 kg/cbm approx. 7,5 t/h bulk weight of 100 kg/cbm approx. 9,7 t/h Bale weight with a bale length of approx. 1.2 m up to 500 kg, depends on material SPS controller Siemens S7-1500 Operating panel Schneider Harmony Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 17 t Special equipment: Wear-resistant floor made of HARDOX steel Larger main hydraulic cylinder with 70 tonnes of pressing force Special press ram for pressing loose bulk materials with small grain sizes OptiCut XS system for lower cutting forces and higher throughput rates Special pressing piston for pressing "difficult" materials Technical data for the conveyor belt: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Deutschland Type KGF GB 1500 Year of construction 2023 Drive power 4.0 kW Belt speed approx. 0.3 m/second Length feeding conveyor 2,679 mm Length elevating conveyor 6,866 mm Length goose neck 1,272 mm Grade 35° Effecting width 1,400 mm Side wall height 800 mm Carrier height 50 mm Carrier distance 750 mm Belt quality EP 400/3, 3:1 (DIN quality N) Overall height 4,515 mm Overall transport dimensions11,148 x 2,502 mm (l x w) Technical data on the non-contact personal protection system: Manufacturer BOREMA Umwelttechnik AG, Switzerland Type APSS iBOR 22 Year of construction 2023 Condition of the press system: The entire system is in very good condition due to the short operating time of only 1,851 pump hours and the processing of only paper, cardboard and film. Scope of delivery: Avermann baler, type AVOS 1410 BS-22/50, incl. wire drawing stations and bale chute Avermann conveyor belt, type KGF GB 1500 BOREMA personal protection system, type APSS iBOR 22 Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors. Isdpfx Agsu Thbxs Dea

Condition: ready for operation (used), Model: HSM V-Press 1160 Plus Baler Pressing force (kN): 532 Output (bales/h): 1–2 Max. bale size (mm): 1200x1100x1000–1200 Dimensions (L x W x H) (mm): 1780x1150x2985 Power (kW): 7.5 Iedera Nyujpfx Ag Dsa Year 2007–2008 price €5,500 year 2009–2010 price €5,800 year 2011–2013 price €6,300 We also offer HSM V-Press 1160 Max balers, year 2014–2015 Weight (kg): 2,300 ALSO AVAILABLE: 2017–2018 models – €7,500

Condition: excellent (used), Year of construction: 2013, screw diameter: 38 mm, This machine is in storage at Plastima Used Machinery Iodpfovcqccsx Ag Doa

Condition: excellent (used), functionality: fully functional, Heavy-duty cutting mills Manufacturer: Herbold AMIS Type: SM 60/100 7-2 Inlet opening 700 x 1000 mm Isdpoufi Rxefx Ag Dea Open rotor 600 mm diameter x 980 mm wide Rotor blades: 7 Stator blades: 2 plus blade set: 2 Blade setting table

Condition: used, machine/vehicle number: 12599, Rotor diameter: 600 mm Ijdok N Iy Nspfx Ag Dea Rotor width: 1450 mm 12-knife rotor 3 rows stator knives Inlet cross section approx. 780 x 1490 mm Drive motor: 132 kW

Year of construction: 2016, condition: new, functionality: fully functional, HDPE Film washline construction year: 2016 0 working hours (was never in operation) Iodpotuui Dsfx Ag Doa brand: NEUE HERBOLD, D-74889 SINSHEIM consisting of: Wet-granulator type SM 450/600-S5-2 Friction washer type FW 560/3000 Conveying screw Floating tank (Floating - sink separation) type TB 500 Mechanical Dryer type TM 1005 Suction Unit type MFT 55/500 Electric control

Condition: used, machine/vehicle number: 12248, Rotor diameter: 300 mm Iedpfx Ageh Dxtfj Doa Rotor width: 600 mm 3-blade rotor 4 rows of stator blades Inlet cross-section approx. 300 x 600 mm Drive motor: 37 kW

Condition: used, machine/vehicle number: 11481, Rotor diameter: 300 mm Isdpjghgmzjfx Ag Dsa Rotor width: 600 mm 3-blade rotor 4 rows of stator blades Inlet cross-section approx. 250 x 600 mm Drive motor 37 kW

Condition: reconditioned (used), Year of construction: 2020, operating hours: 3,300 h, functionality: fully functional, overall weight: 28,000 kg, total width: 2,500 mm, VZ 850 DK, Volvo Penta TAD16 L 770 HP, 3,300 operating hours - Conveyor belt as new, rollers replaced Iodpfxjw S Iiis Ag Dsa - Fine shredding shafts 12-9 as new - Counter-blade as new - Two hoppers - Long discharge conveyor - Magnetic belt - Track undercarriage guard - Cleanfix reversible fan