Used Drilling Rig for sale (6,827)

Condition: ready for operation (used), Year of construction: 1994, overall weight: 7,000 kg, Arm length 1800 mm, drilling capacity 80 mm, weight 7000 kg Ncsdpfxoyzq Dps Aiyou

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 14008455, Fehlmann Picomax 54 model with Heidenhain TNC 320 control, in very good condition. Technical specifications: - Year of manufacture: 2008 - Travel in X, Y, and Z axes: 500/260/480 mm - Travel of the drilling spindle: 160 mm - Table dimensions (L x W): 880 x 320 mm - Maximum table load: 250 kg - Distance from table to spindle nose: 0 - 605 mm - Feed rate in X/Y: 1 - 2000 mm/min - Feed rate in Z: 1 - 1200 mm/min - Rapid tool change system: SF 32 - Spindle speed range, infinitely variable: 7100 rpm - Machine dimensions (W x D x H): 1850 x 2550 x 2400 mm - Weight: 2150 kg Accessories: - Heidenhain TNC 320 control - 4th axis with tailstock and Rohm 140mm 3-jaw chuck Nsdpfjzgwiysx Aiyecu - Various holders - Microscope - Heidenhain probe - Machine lamp - Cooling system

Condition: used, Year of construction: 1980, taper MK 3 feed: 4 Stufen 2580 x-travel 2500 mm throat 1000 mm 1000/2800 mm weight 3,7 t Ncjdpfxezfqmpe Aiysu

Condition: excellent (used), Year of construction: 2019, drilling depth: 3,000 mm, total length: 11,500 mm, total width: 4,300 mm, total height: 2,350 mm, rotational speed (max.): 1,800 rpm, spindle motor power: 44,000 W, Deep hole drilling machine Tacchi - FT 350 x 3000 MACH-ID 9650 Make: Tacchi Type: FT 350 x 3000 Control: SIEMENS 840D Year: 2019 High precision accuarcy ( two step proces) 1e step  cutting using skiving knives 2 step cold-form rollers for highest surface toleraces For Superfinishing Hydraulic and Pneumatic Cylinders / Rods ECOROL Boring heads in diameter: 40/50/63/80/90/100 mm Nedezdq Ecspfx Aiyjcu Maximum out side diameter 250 mm Swing over bed 700 Center height 350 mm Drilling carriage Rapid feed rate both directions 6000 mm/Min Max. Drilling thrust 35000 N Feeder carriage Rapid movement 5000 mm/Min Thrust against workpiece 35.000 N Hydraulic approach stroke 150 mm Max. drill Ø steel:200mm Spindle bore: 85mm Drilling depth: 3000mm Power on spindle: 44kW Speeds / ranges: 1800Rpm Length: 11500mm Width: 4300mm Height: 2350mm Weight: 14450kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, Year of construction: 2026, bore capacity in steel (diameter) 32.0 mm 35.0 mm bore stroke 150 mm M 22 (St 60) throat 300 mm 0.1 - 0.2 mm/U MK 4 480 x 480 mm 80.0 - 1.170 U/min 0.90 / 1.35 kW 340 kg 800 x 1000 x 2000 mm Manufacturer's list price: 8.665 EURO Special price on request Equipment: - Column drilling machine - "V-belt drive" - infinitely variable speed adjustment - Manual automatic spindle feed - Thread cutting device * automatic feed reversal RS for thread cutting - pole-changing drive motor - depth scale and adjustable depth stop - Height-adjustable work table * Adjustment with hand crank - Right/left rotation of the drill spindle - Machined machine base incl. coolant device - Machine/work light - Folding drill spindle guard Ncjdpfx Aiex Dngksysu - Emergency stop button at the front - CE marking + instruction manual

Condition: good (used), Year of construction: 1995, Control system: Heidenhain TNC 415 Spindle diameter: 130 mm Travel in X-axis: 3500 mm Travel in Y-axis: 2000 mm Ncjdpezff A Ejfx Aiyju Travel in Z-axis: 1250 mm Travel in W-axis: 700 mm B-axis: 0.001° Rapid traverse rate: 10 m/min Table size: 1800 x 1600 mm Table load capacity: 12 tons Spindle power: 37 kW Spindle speed: 2000 rpm (2-speed gearbox) Chip conveyor

Condition: excellent (used), Inline drilling machine Manufacturer: Ixion Type: 3 R 15 3 consisting of a tapping machine BT15GL Tapping capacity up to M16 8 tapping chucks Ncodpfjzdp U Nox Aiyou Pitch: 0.4 - 0.5 - 0.7 - 0.8 - 1 - 1.25 - 1.5 - 1.75 Drilling machine BT 15 P MK2 10 speeds, 240 - 3800 rpm and drilling machine BT 15 5 speeds, 480 - 3800 rpm Length: 980 mm Width: 660 mm Height: 1600 mm Weight: 420 kg

Condition: good (used), Type: SSB 3 A Machine No.: 5607 Year of manufacture: 1973 Equipment: - MK3 quill - Machine lamp - Quick-action drill chuck incl. morse taper arbor, clamping range 3-16 mm Ncedpfxexlqxfe Aiysu - Infinitely variable speeds Range 1: 0-900 rpm Range 2: 0-1700 rpm - Thread cutting device Condition: good, workshop-tested, speed variator with new bearings

Condition: good (used), functionality: fully functional, total width: 940 mm, total height: 1,850 mm, spindle speed (max.): 1,650 rpm, spindle speed (min.): 45 rpm, This Bimak Mod. 35 MT/C is a well-maintained column drilling machine equipped with a cross table and features a Mitutoyo digital readout on two axes. The machine supports both clockwise and counterclockwise rotation, which can be easily switched using a foot pedal for efficient operation. The Laip quick-change system includes ten tool holders, consisting of two drill chucks and seven collet holders, providing flexibility for various drilling and tapping tasks. Nsdpfxsxt Ivke Aiyjcu An additional collet holder is required for milling operations with this machine. This holder is not included but can still be ordered as new. Manufacturer: Bimak Model: Mod. 35 mt/c Condition: Used Mains voltage: 400V Drive: V-belt Spindle taper: MC4 Spindle stroke: 150 mm Automatic spindle feed: No Speed ranges: 14 (45 - 1650 rpm) Digital readout: Mitutoyo Coolant pump: Yes Reversible (CW/CCW): Yes Cross table dimensions: 600 x 240 mm Machine dimensions: 940 x 1100 x 1850 mm (Width x Depth x Height) Motor: 0.8 / 1.5 kW See website for a video of the machine in operation.

Condition: good (used), Twin-spindle drilling machine, row drilling machine, drilling machine, bench drilling machine, pillar drilling machine Nodpfxjb A Ikis Aiyecu -Spindle mount: B13 -Table size: 300 x 1100 mm -Protrusion: 150/180 mm -Spindle stroke: 50/70 mm -Weight: approx. 200 kg

Condition: used, Year of construction: 1970, Technical details: Ncedpfxszgcx Hs Aiyju bore stroke: 170 mm total power requirement: 3,5 kW dimensions of the machine ca.: 0,75 x 1,10 m

Condition: used, Year of construction: 1989, Used machine Year of manufacture: 1989 Equipment and technical data: Drilling capacity: 16/20 mm (temporarily up to 23 mm) Morse taper MK 2 Throat depth: 245 mm Drilling depth: 100 mm Column diameter: 82 mm Table size: 220 x 310 mm Motor power: 0.75 kW Spindle speeds: 340-530-900-1530-2400 rpm Weight: 132 kg Availability: short notice Ncodpsy Ih Tzofx Aiyou Location: 63934 Röllbach

Condition: used, Display unit Condition: Like new Included in delivery: Equipment case Device Operating instructions Njdoyamc Djpfx Aiyscu Bit This item is an unused display unit.

Condition: used, Year of construction: 1998, Used machine Year of construction 1998 Nsdpfx Aisw Naabsyscu this machine can be used to drill corner bearings, fanlights and olives on loose or pressed frame wood The scanning is carried out at the rebate, the 8 stops for the corner bearing and skylight, as well as for the set timber and transom are automatically used after the timber has been positioned. The machine has an automatic program sequence with electrical control for the drilling motors, triggered by a safety foot pedal Pneumatic connection R 1/4" 5-6 bar Suction speed 25 m/sec. Suction nozzle diameter 120 mm Electrical connection 0.75 kW Space requirement 2950 x 650 x 1100 mm Availability: short term Storage location: Flörsheim

Condition: used, Used machine Fitting drilling machine Cup band drilling machine Fitting drill (Grass drilling pattern) 6 drilling spindles in series (32 pitch) (one spindle of the 8 drill head is defective) Nedpfx Aow I Uwxsiyscu 4 further drilling spindles upstream for cup drillings Pneumatic hold-down stop depth adjustment Connection: 16 A / 380 V Motor: 1.5 kW Weight approx. 100 kg Dimensions: 3,130 x 1,060 x 710 mm Availability: short term Storage location: Flörsheim

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 Robust drilling machine featuring a powerful OPTIMUM brushless drive. Key highlight: menu-guided control for operating modes drilling/tapping. - Smooth-running and high-performance brushless drive - Optimal power transmission via aluminium pulleys combined with a toothed GATES quality V-belt - High running smoothness thanks to precision-ground multi-spline drive - Concentricity guaranteed at less than 0.015 mm, measured at the quill - Drilling spindle with precision ball bearings Nedpfew Rhk Rox Aiyscu - Membrane keypad; dust- and water-resistant, easy to clean - High-quality OPTIMUM quick-action drill chuck included as standard - Separate emergency stop pushbutton - Precisely machined worktable with diagonal T-slots, 360° rotatable - Integrated coolant channel surrounding the worktable - Large, height-adjustable safety guard with interlock switch for maximum operator protection - Drilling depth stop - V-belt guard with safety switch - V-belt tensioning mechanism - Solid, large base plate with reinforced ribs at the rear Technical specifications: Column diameter: 60 mm Dimensions (LxWxH): approx. 552 x 445 x 850 mm Weight: approx. 64 kg Drilling capacity (steel): 18 mm Continuous drilling capacity (steel): 16 mm Tapping capacity (steel): M10 Table size: 230 x 245 mm Speed range: 100 – 6000 rpm Number of speed ranges: 5 Total power connection: 1.5 kW Mains voltage: 230 V Quill stroke: 65 mm Spindle taper: MT 2 Throat depth: 130 mm Including quick-action drill chuck 1–13 mm Including machine vice BMP 100 Availability: short-term Location: Flörsheim

Condition: used, Display unit Ncedpfx Aev Ntb Ioiysu Condition: Like new Included in delivery: Equipment case Device Operating instructions Bit This item is an unused display unit.

Condition: used, Year of construction: 2014, functionality: fully functional, power: 3.8 kW (5.17 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, workpiece width (max.): 800 mm, number of axes: 3, overall weight: 1,100 kg, Equipment: CE marking, Horizontal drilling Nedpfx Aioy Sh H Noyocu Vertical drilling Grooving Panel width up to 80 cm

Condition: used, Drill sleeve, MK 4 Ncedpfxjb Tyqao Aiyeu Length 170 mm Diameter 63 mm

Condition: excellent (used), 10 x Deep-hole drill bits, manufacturer Botek 3 pieces, 6.5 x 320 mm 2 pieces, 10.2 x 190 mm 3 pieces, 10.4 x 250 mm Ncsdpfjhl Awdsx Aiyou 1 piece, 11 x 350 mm 1 piece, 11 x 270 mm Weight: 1.5 kg

Condition: like new (used), Donau Donauflex 135 High-Speed Radial Drilling Machine Manufacturer: Donau Model: Donauflex 135 Year of manufacture: 2020 Njdezgvmqepfx Aiyscu Condition: Very good, used but like new Available immediately from stock.

Condition: good (used), Reamer, twist drill, drill bit -Twist drill: Ø 75 mm -Recording: MK5 -on request: different sizes/quantities available from further stock -Dimensions: Ø 75 x 600 mm -Weight: 8.6 kg Ncodox R Sz Ispfx Aiyeu

Condition: used, High-speed milling spindle, HENNINGER Type 814 / 5131 / 1:5 / 15000 Maximum speed: 15,000 rpm at 70% duty cycle Gear ratio: 1:5 Power transmission: up to approx. 2.5 kW Nsdpfxsf Axn Ue Aiyocu Overhang: 110 mm (machine spindle to clamping nut) Tool holder: MK4 with M16 draw-in thread Collets, Type OZ16, Ø: 6 / 8 / 9 / 10 / 11 / 12 / 12.5 / 13 / 14 mm Weight: 6.5 kg Good condition.

Condition: ready for operation (used), functionality: fully functional, input voltage: 380 V, type of input current: three-phase, spindle mount: MK 4, drilling depth: 150 mm, height adjustment type: mechanical, actuation type: electric, rotational speed (max.): 2,400 rpm, rotational speed (min.): 100 rpm, total width: 660 mm, total length: 750 mm, total height: 2,050 mm, table width: 660 mm, table length: 560 mm, 3-phase 380V, 2-speed motor is running smoothly! Geared head with 8 spindle speeds. Gears operate in oil. Spindle RPM adjustable from 100 to 2300. Power feed with 4 feed rates. MT4 spindle mount. Albrecht 1-13mm MT3 drill chuck included. MT3 to MT4 adapter sleeve included. Tool ejector. Emergency stop switch. Runs in both left and right directions. Ncjdpfx Aiezfqz Teysu Table dimensions: 660x560mm Maximum drilling depth: 150mm Drilling depth is adjustable. Head and table are height-adjustable. Good overall condition! Made in Sweden. Overall dimensions: 75x66x205cm Contact us for shipping options! €2,500.00

Condition: good (used), Year of construction: 1990, power: 3 kW (4.08 HP), rotational speed (max.): 1,280 rpm, total width: 2,000 mm, total length: 2,000 mm, total height: 2,300 mm, table width: 400 mm, table length: 1,200 mm, Drilling machine Erlo - TCA 45 BV MACH-ID 9361 Make: Erlo Type: TCA 45 BV Year: 1990 Max. drill Ø steel:45mm Ncodjzcnnajpfx Aiyeu Max. drill Ø cast: 50mm Max. tap Ø: 40M Stroke pinole: 280mm Throat: 470mm Spindle Taper: 5ISO/Bt/Mk Speeds / ranges: 1280Rpm Table Length: 1200mm Table Width: 400mm Power: 3kW Length: 2000mm Width: 2000mm Height: 2300mm Weight: 2800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!