Used Doosan Puma 280 for sale (273)

Condition: good (used), Year of construction: 2012, 370mm max. machining diameter, 651mm swing over bed, 461mm swing over cross-slide, 712mm max turned length, 3500rpm spindle, 76mm bar capacity, 12 station turret, 15kW spindle motor, Fgjdpfxjz D Ayvj Ap Ioi FANUC Oi control, 3 jaw chuck , C axis & Milling, Tool presetter, Tailstock, coolant, swarf conveyor.

Condition: used, Equipment: air conditioning, Year of construction: 2022 Operating hours: 2.990 Empty weight: 24.000 kg Selling price: € 69.500, US$ 77.370 = Additional options and accessories = Fjdpfx Apjt E Ruye Ijgi - Autoradio = Remarks = Used Doosan DX210LC-7 for sale at CHESS This Doosan DX210LC-7 is equipped with a 6 cilinder Doosan DL06V (127kW) diesel engine with just 2.990 working hours on the service meter. Hydraulics for hammer and rotation function additional work lights hydraulic quick hitch rear and side view camera system electric diesel pump Doosan DX210LC-7 ready or inspection at our yard! For more information please contact us

Condition: excellent (used), Year of construction: 2022, operating hours: 4,605 h, functionality: fully functional, Controller: FANUC 31i-B5 Fedpezilupsfx Ap Iegi Max. turning diameter: ø540 mm Max. turning length: 1.020 mm Spindle bore / bar capacity: ø76 / 65 mm Y-axis travel: 170 mm (±85) Milling spindle: 12.000 rpm, 18.5 kW Tool magazine (ATC): 80 stations, Capto C6 Tool change time: 2.0 s Counter spindle: 5.000 rpm, 22 kW Spindle power: 22 / 18.5 kW (S1/S6)

Condition: used, power: 201 kW (273.28 HP), fuel type: diesel, color: orange, Equipment: air conditioning, Year of construction: 2013 Operating hours: 5.504 Number of cylinders: 6 Empty weight: 19.500 kg Engine type: Scania DC09 078A Selling price: € 39.500, US$ 43.980 = Additional options and accessories = - Autoradio Fsdpfst E Rffjx Ap Ijgi - Central lubrication - Reverse camera - Rock bucket = Remarks = Used Doosan DL300-3 wheel loader for sale at CHESS This Doosan DL300-3 equipped with a 6 cilinder water cooled turbo charged Scania DC09 078A diesel engine (201kW) with just 5504 working hours on the service meter! Moreover this machine is equipped with a rock bucket Very nice Doosan DL300-3 with genuine hours and no malfunctions. For more information please contact us

Condition: used, functionality: fully functional, Year of construction: 2012, weight max. in kg 1500 kg serial number FGA04-1290-00480 drive Treibgas Fodpoztfyyefx Ap Ijgi weight 2800 kg length in width 940 mm ca. 2.060 mm (je nach Mas engine output ca. 34 kW kW cubic capacity 1.975 cm³ ccm

Condition: ready for operation (used), Year of construction: 2017, operating hours: 2,738 h, travel distance X-axis: 650 mm, travel distance Y-axis: 765 mm, travel distance Z-axis: 520 mm, controller manufacturer: FANUC, controller model: i series, spindle speed (max.): 12,000 rpm, number of axes: 5, This 5-axis DOOSAN VC 630/5AX was manufactured in 2017. It features an impressive X-axis travel of 650 mm, Y-axis travel of 765 mm, and Z-axis travel of 520 mm. The machine includes a robust table size of Ø 630 mm and can accommodate workpieces up to Ø 730 x 500 mm with a maximum weight of 500 kg. If you are looking to get high-quality machining capabilities, consider the DOOSAN VC 630/5AX vertical machining centre we have for sale. Contact us for further details. • A axis travel: +30° ~ -120° • C axis travel: 360° • Rapid feedrate (X/Y/Z): 40 / 40 / 36 m/min (1574.8 / 1574.8 / 1417.3 ipm) • Rapid feedrate (A/C): 20 / 30 r/min • Table size: Ø 630 mm (Ø 24.8 in) • Max. workpiece size: Ø 730 x 500 mm (Ø 28.7 x 19.7 in) Fedpfx Asz Hwgpsp Ijgi • Max. workpiece weight: 500 kg (130.1 lb) • Total operating hours (ACCESO): 5679 H 6 M • Total working time (TMP LAV): 2748 H 23 M 44 S • Total cutting time (TEMPO TAGLIO): 2400 H 32 M 35 S • Total parts count (PEZZI TOTALI): 103 Additional equipment • Chip conveyor

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 800 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, controller manufacturer: HEIDENHAIN, controller model: HEIDENHAIN TNC-640, table width: 870 mm, table length: 3,500 mm, table load: 3,500 kg, overall weight: 24,000 kg, spindle speed (min.): 60 rpm, spindle speed (max.): 12,000 rpm, coolant supply: 20 bar, distance table center to spindle nose: 900 mm, spindle motor power: 32 W, spindle nose: ISO 40, number of spindles: 1, number of slots in tool magazine: 60, tool length: 300 mm, tool diameter: 76 mm, tool weight: 8 g, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, USED DOOSAN VCF 850L-II traveling column machining center with HEIDENHAIN TNC-640 CNC Fgedpfew Dcl Rsx Ap Isi

Condition: ready for operation (used), Year of construction: 2022, travel distance X-axis: 1,050 mm, travel distance Y-axis: 570 mm, travel distance Z-axis: 510 mm, controller manufacturer: FANUC, controller model: i Series, overall weight: 6,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 18,500 W, number of slots in tool magazine: 30, number of axes: 3, This 4-axis DOOSAN DNM 5700 was manufactured in 2022. It features an X-axis travel of 1,050 mm, Y-axis travel of 570 mm, and Z-axis travel of 510 mm. The machine is equipped with a spindle speed of 12,000 rpm and a tool magazine capacity of 30 tools. If you are looking to get high-quality machining capabilities, consider the DOOSAN DNM 5700 vertical machining centre we have for sale. Contact us for further details. • Rapid traverse X/Y/Z: 36 / 36 / 30 m/min • Spindle torque: 118 Nm • Through-spindle coolant: 12 bar • Power supply: 380 V, 3-phase, 50/60 Hz • Standard-height column • Tool breakage detection • Ball screw nut cooling Fgsdsz Rw U Aepfx Ap Iei • Coolant level sensor Additional equipment • 4th axis • Hydraulic system (3A + 1B) • Automatic doors • Robot interface • Chip conveyor • Oil skimmer • Mist collector interface Technical Specification Taper Size BT 40

Condition: good (used), Year of construction: 2014, functionality: fully functional, DOOSAN Horizontal Machining Center Model: NHP 5500 Fgjdpfsz Apb Tex Ap Ioi Year: 2014 Control Unit: FANUC 31I-MODEL B X-axis travel: 800 Y-axis travel: 750 Z-axis travel: 850 Table length: 500 Table width: 500 Max. workpiece size (length x width x height): D.850x1100 Table surface: Tapped holes Max. workpiece weight: 800 kg Spindle: 10000 rpm with oil-cooled, double-contact flange Spindle connection: ISO 50 Torque (cont. / 10 min): 600 NM Rapid traverse rate (xyz axes): 60,000 Number of tools: 60 Coolant pressure: 70 Bar Coolant tank capacity: 500L Height: 3495 Width: 3930 Depth: 6520 Weight: 18000 Pallet size: 500x500 Chip conveyor: Scraper type -EXTERNAL 4-WAY HYDRAULIC LOCKING SYSTEM, 70 BAR, WITH LOCK/UNLOCK SWITCH -INTERNAL/EXTERNAL AIR BLOW FUNCTION, ADJUSTABLE "M" FUNCTION -AUXILIARY PUMP FOR SHOWER WASHING, CALPEDA 15 BAR -PREPARATION FOR ROBOT ELECTRICAL CONNECTION (FANUC) -INTERNAL TOOL LENGTH AND RADIUS OFFSETTING SYSTEM, RENISHAW TS27R. A NEW, IDENTICAL UNIT IS AVAILABLE IN STOCK IN CASE OF FAILURE. -PREPARATION FOR WORKPIECE MEASUREMENT AND OFFSETTING PROBE WITH RENISHAW RMP60 CYCLES (RADIO TRANSMISSION)

Condition: excellent (used), Year of construction: 2019, operating hours: 14,553 h, functionality: fully functional, machine/vehicle number: ML0405-000122, spindle bore: 51 mm, spindle speed (max.): 6,000 rpm, bar passage: 51 mm, bar diameter (max.): 51 mm, Equipment: documentation/manual, In addition to the lathe, a TOP AUTOMAZIONI FU350SX bar feeder, year 2020, is also for sale. The price is for the complete set. Fodpsyym Smefx Ap Isgi

Condition: used, Year of construction: 2012, machine/vehicle number: MB0001-000031, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,200 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 12 m/min, feed length Y-axis: 6 mm, feed rate X-axis: 6 m/min, feed rate Y-axis: 6 m/min, feed rate Z-axis: 6 m/min, controller manufacturer: FANUC, controller model: 32i Model A, workpiece diameter (max.): 2,550 mm, workpiece weight (max.): 7,000 kg, total height: 4,200 mm, total length: 5,540 mm, total width: 5,930 mm, table width: 1,400 mm, table length: 1,600 mm, overall weight: 29,000 kg, spindle speed (max.): 3,000 rpm, distance table center to spindle nose: 1,750 mm, spindle motor power: 26 W, spindle nose: BT50, number of slots in tool magazine: 60, tool length: 600 mm, tool diameter: 250 mm, tool weight: 30 g, B Axis: 1 degree Control: FANUC 32i-Model A Distance from Spindle Nose to Table Top: 0 - 1500mm Distance from Spindle Nose to Table Centre: 550 - 1750mm Machine Dimensions: 5540 x 5930 x 4200mm Machine Weight: 29000kg Maximum Cutting Feedrate: 6m/minute Maximum Tool Diameter: 250mm Maximum Tool Length: 600mm Maximum Tool Weight: 30kg Maximum workpiece weight: 7000kg Rapid Feedrates: WXYZ: 6 x 12 x 12 x 12m/minute Spindle Diameter: 110mm Spindle Motor Power: 26/22kW Spindle Speed: 3000rpm Fsdpfx Apoxm Sxvs Isgi Swing: 2550mm Table Size: 1400 x 1600mm Tool Change Capacity: 60 Station Tool Size: BT50 Traverses XYZ: 2000 x 1500 x 1200mm W Axis: 500mm Coolant, Low Volt Light, Swarf Conveyor, Long Reach Right Angled Milling Head, Tool Length Measurement Probe, Renishaw Work Probe, Fully Enclosed machine guards.

Condition: used, Equipment: air conditioning, Year of construction: 2020 Operating hours: 7.412 Empty weight: 30.500 kg Selling price: € 79.500, US$ 88.510 = Additional options and accessories = - Autoradio = Remarks = Fsdet E Rutjpfx Ap Ijgi Used Doosan DX300LC-7 for sale at CHESS This Doosan DX300LC-7 is equipped with a 6 cilinder Doosan DL08V (202kW) diesel engine with 7.412 working hours on the service meter. Hydraulics for hammer function hydraulic quick hitch grading bucket additional books 360 degrees camera system boxing ring electric diesel pump additional work lights Doosan DX300LC-7!! For more information please contact us

Condition: good (used), Year of construction: 2012, functionality: fully functional, Machine parameters: Travel in X, Y, and Z axes: 1270 x 670 x 625 mm Table clamping area: Fgodpfxsz Iw Dds Ap Iei 1300 x 670 mm Description: The machine is in good technical condition, and testing is possible by prior arrangement. It features a FANUC control system. The machine has a cast iron construction, linear guides, travel in the X/Y/Z axes of 1270/670/625 mm, table dimensions with clamping "T" slots of 1300 x 670 mm, table load capacity of 1000 kg, and a tool changer with 30 positions. Extensive accessories include: a 4th axis (rotary table), a hydraulic vice, a RENISHAW tool and workpiece probe, an oil skimmer, a three-color light signaling system, a chip conveyor, a Filtermist 6002 emulsion mist extractor, tool holders, etc.

Condition: ready for operation (used), functionality: fully functional, power: 107 kW (145.48 HP), empty load weight: 11,600 kg, Year of construction: 2010, Equipment: air conditioning, all wheel drive, cabin, Wheel Loader DOOSAN DL200 Year: 2010 Approx. 14,000 operating hours 107 kW 11.6 tonnes - incl. bucket - hydraulic Volvo quick coupler - auxiliary hydraulic circuit up to the fork carrier - air conditioning - central lubrication - rearview camera - Good 20.5R25 tyres - Machine is immediately ready for operation! - Original paint! - Not cleaned and not repainted! - Direct from the construction site! Sale price: €22,900 net Available with new pallet forks for an extra charge! Fedpfx Apeyyy H Rs Iogi Also available with low-cost delivery!

Condition: reconditioned (used), functionality: fully functional, fuel type: diesel, overall weight: 15,000 kg, chain condition: 90 %, Year of construction: 2019, operating hours: 5,050 h, Equipment: UVV, air conditioning, cabin, gripper hydraulics, hammer hydraulics, hydraulics, onboard computer, rubber tracks, Doosan DX 140LCR-5 with adjustable boom and HS 10 attachment, with 4,080 operating hours, year of manufacture 12/2019. Major service and statutory UVV inspection recently completed. Price and attachments on request. Fgodpfx Asww T Aasp Ioi

Condition: good (used), Year of construction: 2008, functionality: fully functional, operating hours: 9,267 h, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 850 mm, workpiece height (max.): 1,000 mm, workpiece weight (max.): 1,200 kg, total height: 30,410 mm, total length: 70,000 mm, total width: 44,270 mm, coolant supply: 30 bar, spindle motor power: 26 W, number of spindles: 60, rapid traverse Z-axis: 24 m/min, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, spindle nose: ISO 50, spindle speed (max.): 6,000 rpm, spindle speed (min.): 20 rpm, tool diameter: 250 mm, tool length: 550 mm, workpiece diameter (max.): 1,000 mm, Equipment: chip conveyor, rotational speed infinitely variable, Horizontal machining center with automatic pallet changer "DOOSAN mod.HM 630" with CNC Fanuc 18i-MC Fedpfjtvf Smjx Ap Iogi

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, turning length: 330 mm, turning diameter: 350 mm, spindle bore: 65 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 45 rpm, travel distance X-axis: 205 mm, travel distance Z-axis: 340 mm, spindle motor power: 15 W, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 36 m/min, total height: 1,700 mm, total length: 3,600 mm, total width: 1,600 mm, Equipment: rotational speed infinitely variable, USED ​​DOOSAN LYNX 2100B 2-axis lathe with Fanuc i-Series CNC Fgjdpfx Ajzhaawop Iei

Condition: used, Selling price: € 1.500, US$ 1.670 Beco quickcoupler with CW40 connection to fit 20-25 ton machines with pin diameter 80 and stick width 330mm For example Doosan DX225 or Hyundai HX220 Fsds Agu Tmjpfx Ap Ijgi

Condition: good (used), Year of construction: 2013, Traverses XYZ: 762 x 435 x 510mm, table size 920 x 435mm, ISO40 spindle taper, spindle speed 12000 rpm, FANUC i Control, spindle motor power 15kW, 30 station ATC with side arm, Fgsdpfxszhwg Uo Ap Isi Through Spindle Coolant, Low Volt Light, Swarf conveyor

Condition: excellent (used), Year of construction: 2015, Traverses XYZ: 1020 x 540 x 510mm, Fgedpeylbpvefx Ap Iji table size 1200 x 540mm, ISO40 spindle taper, spindle speed 12000 rpm, Siemens 828D Control, spindle motor power 15kW, 30 station ATC with side arm, Through Spindle Coolant, Low Volt Light, Swarf conveyor

Condition: ready for operation (used), Year of construction: 2017, spindle speed (max.): 12,000 rpm, travel distance X-axis: 400 mm, overall weight: 8,500 kg, controller manufacturer: FANUC, number of slots in tool magazine: 30, number of axes: 5, This 5-axis DOOSAN DNM350/5AX was manufactured in 2017. It features a tool turret with 30 stations and utilizes BT40 tool holders. The machine is fully functional and has operated for 5500 hours. If you are looking to get high-quality milling and turning capabilities, consider the DOOSAN DNM350/5AX mill-turn centre we have for sale. Contact us for further details. • Tool holder type (tool turret 2): BT40 • Operating hours: 5,500 • Power supply: AC 380 V, 50/60 Hz • Rated power: 40,61 kVA • Transformer capacity: 5 kVA • Full-load current: 64,67 A • Short-circuit capacity: 10 kA Fodpszxy Ivjfx Ap Iegi Technical Specification Taper Size BT 40

Condition: used, lifting height: 3,410 mm, Year of construction: 2019 Operating hours: 2.935 Empty weight: 3.500 kg Dimensions (LxBxH): 465 x 170 x 252 cm Digging depth: 4.88 m Fjdeyn En Uspfx Ap Iogi = Additional options and accessories = - Rubber tracks

Condition: used, Year of construction: 2016, operating hours: 11,200 h, Various optical signs of wear and tear. Fgjdpfjy Eadajx Ap Isi

Condition: ready for operation (used), Year of construction: 2017, operating hours: 6,117 h, - USED - 3-AXIS VERTICAL MACHINING CENTRE   X-AXIS TRAVEL: 1050 mm Y-AXIS TRAVEL: 570 mm Z-AXIS TRAVEL: 510 mm DISTANCE SPINDLE NOSE-TABLE: 150-660 mm RAPID FEEDS X-Y-Z: 36 - 36 - 30 m/min SPINDLE: 15000 rpm; 10 - 17 kW; ISO 40 - DIN TABLE SIZE: 1300 x 570 mm MAX ADMITTED LOAD: 1000 Kg TOOL MAGAZINE: CHAIN-TYPE ; 30 POS MAX TOOL DIAMETER: 80 (125) mm MAX TOOL LENGHT: 300 mm MAX TOOL WEIGHT: 8 Kg CONTROL UNIT: HEIDENHAIN TNC 620 WEIGHT: 6500 Kg OVERALL DIMENSIONS: 3110 x 2413 x 2985 mm ACCESSORIES: HIGH PRESSURE COOLANT ; Fodpfx Aezhc Anop Ijgi SWARF CONVEYOR ; ETHERNET PORT ; USB PORT ; TOOL SETTER ; TOUCH PROBE ; PORTABLE HANDWHEEL

Condition: used, Year of construction: 2012, travel -x axis 1.630 mm travel -y axis 762 mm travel -z axis 650 mm control FANUC - 0I-MD Spindle speed 12.000 min -1 weight of the machine ca. 13 t Milling machining centers - vertical | DOOSAN - DNM 750 equipped with 30-way tool changer, ITC (20 bar) and chip conveyor. Fodpfx Apezw N E Ij Iogi The machine only has 13.686 spindle hours. The machine video from the production plant will be shared on request. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DNM750 | DNM-750