DOOSAN LYNX 2100B

DOOSAN LYNX 2100B

Condition: good (used), Year of construction: 2008, functionality: fully functional, turning length: 750 mm, turning diameter: 590 mm, spindle bore: 78 mm, spindle speed (max.): 3,000 rpm, Equipment: documentation/manual, Centre distance: 750 mm Swing: 590 mm over bed / 375 mm over slides Spindle speeds: 25 - 3.000 rpm Spindle bore: 78 mm Revolver: 10 Platze Controller: Siemens 810D Shopmill Featured with: - Double footpedals - Chipconveyor - Machine manuals Country of origin: Z. Korea Motor power: 25 kW Ibjdjxmvzuopfx Ad Nja Machine weight: 6.000 kg Machine LxWxH: 300 x 180 x 190 cm

Condition: like new (used), Year of construction: 2019, Arburg 1200 T 2000-800 (vertical machine with rotary table 1200mm) Clamping unit 2000T Table diameter: 1200mm Angle rotation: 180 degrees Clamping force: 200 tons Opening force max. kN/mm: 115/500 Platen daylight max. : 600 mm Injection unit Screw diameter: 45 mm Shot volume: 318 cm3 Ibodpjwugczefx Ad Nja Shot weight: 291 g Injection pressure: 2470 bar 1. Model: T model 2. Machine type: 1200 T 2000 - 800 3. Plasticizing unit: Thermoplastics cylinder 45 mm, highly wear-resistant 4. Screw: Reinforced screw coupling for splined coupling geometry 5. Control system: SELOGICA ‘direct’ controller 6. Technology stage: Stage 2 servo-regulated with 2 control pumps 7. Rotary table: Advanced ergonomics special model, 2-station 180° forward/backward alternating 8. Nozzle: Open nozzle 45 mm with nozzle tip 9. In-mould needle nozzles: Electric & hydraulic control for needle nozzle 1, electric & pneumatic control for needle nozzle 2 10. Heating: Heater band for open nozzle, 9 electric heating control circuits for mould heating 11. Clamping platen: Mould mounting platen set, central diameter 125 mm 12. Blow unit: Mould blow unit with pressure reducer at station 1 13. Safety: Optical barrier at loading station, continuous oil cooling and filtration 14. Hopper: Adapter (extension) for feed hopper, machine delivered without 50 L hopper 15. Robot interface: Interface for robot system for station 2 & 3 (based on EM67/1) 16. Electric axes: Basic equipment for electric axes control 17. I/O: 4 programmable inputs/outputs on terminal rail 18. Sockets: Additional socket combination (1 CEE, 1 Schuko) 19. Interfaces: Temperature control device interface (REGLOPLAS), printer USB interface, Compact Flash, EUROMAP 65 chip card user authorisation 20. Acoustic alarm: Error alarm acoustic signal 21. Safety interlock: Interface for safety interlock of door (EUROMAP 73) 22. Cooling circuits: 3 regulated machine-related cooling circuits with flow indicator, 3 manually adjustable cooling circuits for second water manifold 23. Anti-corrosion: Anti-corrosion treatment for rotary table, sealing lip on outer diameter 24. Manual & labels: CD operating manual & spare parts list, Slovak language labels 25. Machine feet: Anti-vibration footplates 26. Other: Hydraulic ejector, external cycle start key, standard equipment packages, new ARBURG colour scheme 27. Display languages: IT/EN/SK

Condition: ready for operation (used), Year of construction: 2012, operating hours: 7,474 h, travel distance X-axis: 508 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 356 mm, controller manufacturer: HAAS, table load: 227 kg, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis HAAS Mini Mill 2 was manufactured in 2012. It features an X-axis travel of 508 mm, Y-axis travel of 406 mm, and Z-axis travel of 356 mm. The machine includes a table size of 1,016 × 356 mm and a maximum table load of 227 kg. If you are looking to get high-quality machining capabilities, consider the HAAS Mini Mill 2 vertical machining centre we have for sale. Contact us for further details. • Table: • Size: 1,016 × 356 mm • T-slots: 3 × 16 mm • T-slot spacing: approx. 110 mm • Feed rates: • Max cutting feed: 12.7 m/min • Rapid traverse: 15.2 m/min • Electrical: • Power supply: 360–480 V / 3 Ph / 50–60 Hz Ibodozbh U Dopfx Ad Nja Technical Specification Taper Size BT 40

Condition: good (used), Year of construction: 2008, Ref. -No.: 10564 Manufacturer: TOYODA Type: FH 630 SX Year of construction: 2008 Type of control: CNC-Steuerung Control: Fanuc 31i - A Storage location: Halberstadt Country of origin: Japan Serial no.: NS2XXX X-Travel: 1000 mm Y-Travel: 800 mm Z-Travel: 850 mm B-Axis: 360 ° Max. Workpiece Weight: 800 kg Max. Tool Weight: 27 kg Max. Tool Length: 545 mm Max. Tool Diameter: Ø 120 mm Max. Size Of Workpiece Lxwxh: Ø 1000 x 1000 mm Tool Taper: BT - 50 Ibjdpfsxvw Izex Ad Nja Tool Piece Magazine With: 60 Pcs./pcs. Spindle Speed: 6000 RPM Machine length: 7000 mm Machine width: 3500 mm Weight Of The Machine Ca.: 20,1 t Further information: - Equipped with IKZ and chip conveyor - NC rotary table 360,000 * 0.001° Machine can be inspected under power by arrangement.

Condition: used, Year of construction: 2012, x-travel 630 mm y-travel 800 mm z-travel 750 mm control SIN 840D sl Siemens B - axis 360 x 0,001 ° A - axis -200 -- +25 x 0,001 ° spindle turning speed - stepless 20 - 18.000 U/min Iedpfx Aevxwxvjd Nsba power capacity at 100 % load 28,00 kW power capacity at 40 % load 34,00 KW max. torque at 40% / 100% load 110 / 84 Nm tool taper HSK 63 feed X/Y/Z/-axis 1 - 100.000 mm/min rapid traverse X/Y/Z 100,00 m/min feed capacity X/Y/Z 9 / 6 / 9 kN feed B-axis 1 - 14.400 °/min feed A-axis 1 - 7.200 °/min size of pallet 2x 500 x 500 mm workpiece weight max. 400 kg max. workpiece diameter 800 mm workpiece height max. 800 mm tool magacine with 63 diameter of tools max. 280 mm tool length - max. 550 mm weight of tools max. 15,00 kg total power requirement 65,00 kW weight of the machine ca. 14,00 t dimensions of the machine ca. 5,50 x 3,50 x H3,20 m 5-axis machining center with SIEMENS SINUMERIK 840D sl control, mechanical tool breakage control, emulsion mist separator, without chip conveyor and without coolant system.

Condition: good (used), Year of construction: 1962, High speed radial drilling machine, radial drilling machine, drilling machine, boom drilling machine, high speed radial drilling machine -Clamping table: 400 x 1100 mm -Projection: 930 mm -Taper mount: MK4 -Engine power: 1.35/1.8 kW -Speed: 41-1700 rpm -Columns: Ø 200 mm -Spindle stroke: 125 mm Ibodjirax Uopfx Ad Nja -Thread cutting device: YES -Feed: 0.075 - 0.3 mm/rev -Dimensions: 1800/1235/H2240 mm -Weight: 1500kg

Condition: excellent (used), Year of construction: 2007, Type: CNC Lathe (horizontal) Manufacturer: Spinner Model: TC 52 Year of manufacture: 2007 Serial number: 123445 Ibsdeyki Hmspfx Ad Nea Control: Fanuc Three-axis machine: XZ C (C-axis is positioning only – no driven tools) Bar diameter: 42 mm Three-jaw chuck: 165 mm Operating/spindle hours: approx. 32,500 h / 6,400 h (read 11/2025) Accessories: chip conveyor, high-pressure coolant (IKZ), chuck, documentation Condition: Good

Condition: ready for operation (used), Year of construction: 2022, controller manufacturer: HAAS, spindle speed (max.): 12,000 rpm, This 3-axis HAAS VF-2SSYT with Pallet Pool 3+1 was manufactured in 2022. It features a 30 hp, 22.4 kW in-line spindle, capable of 12,000 rpm, and a 50+1 tool changer. It includes a 15" screen and a 3+1 pallet pool with 900x450 mm pallets. If you are looking to get high-quality milling capabilities, consider the HAAS VF-2SSYT machine we have for sale. Contact us for more information. Ibedpfxsx Hblus Ad Nea Machine Benefits Technical Machine Benefits • Tool changer: 50+1 tool changer • Extra coolant: 360 liters • Pallet pool: 3+1 pallet pool with 900x450 pallets • 21 bar trough spindle • 15" screen Extra Information Machine still under power

Condition: new, Year of construction: 2022, functionality: fully functional, TAKAMAZ CNC Compact loader FC60 Lathe with automatic loader unloader quickest loading system in the world loading time new part 2,8 sec. loading cap. till 60 mm diameter. loading lenght max 50 mm max weight 1 kg per side loading feed 120 m min include part turning for loading Fanuc Control full warranty 2 year Lathe spec. Spindle motor 7,5/5,5 kw turning diameter max 180 mm turning lenght 240 mm bar cap. 35 mm Ijdpsm E I D Hsfx Ad Neba collet chuck 173E till 40 mm diameter spindle nose A2-5 spindle speed 4500 rpm tool pos 8 stations tool shank 20x20 mm boring holder 25 mm diameter rapid speed X/Z 18/24 meter machine dimension 1,36 x 1,37 meter height 1,7 meter weight 2,7 ton total power 14 KVA Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: used, Year of construction: 2022, surface area 1321 x 610 mm max. table load 1800 kg travel -x axis 1270 mm travel -y axis 508 mm travel -z axis 508 mm spindle cone SK40 number of spindle speeds 12000 U/min spindle capacity 15 kW spindle torque max. 82 Nm rapid traverse y/x/z axis 28 m/min control HURCO MAX5 total power requirement 21 kW weight of the machine ca. 4,25 t dimensions of the machine ca. 4,1 x 3,35 x 2,6 m the machine is like new!!!, only 136 spindle hours Tool changer: - Magazine capacity: 24 positions - Max. tool diameter: 80 mm - Max. tool length: 250 mm - Max. tool weight: 7 kg Accessories: documentation Ibodpfxeza Hque Ad Noa