Used Doosan Puma 280 for sale (273)

Condition: used, Year of construction: 2013, Doosan DNM650 Vertical Machining Centre (2013), Traverses X Y Z: 1300 x 650 x 510mm, Table 1200 x 540mm, Spindle Speed 12,000rpm, BT40 Spindle Taper, Spindle Motor 17kW, FANUC Oi Control, 30 Station ATC, Low Volt light, Through Spindle Coolant. S/No. MV0011-000877, Machine Weight: 8500kg. Country of Origin: Korea Fgsdpfs Ah E S Hox Ap Iei Location: This lot is located in Leicester, UK. A charge of £250 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: used, Year of construction: 2007, operating hours: 67,434 h, functionality: fully functional, machine/vehicle number: PT18SY0210, turning length: 300 mm, turning diameter: 230 mm, spindle motor power: 18,500 W, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 205 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 350 mm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (max.): 6,000 rpm, feed length Z-axis: 350 mm, feed rate Z-axis: 30 m/min, chuck outer diameter: 250 mm, bar diameter (max.): 65 mm, overall weight: 8,800 kg, We are offering a high-performance and reliable Doosan TT1800SY CNC turning center, ideal for demanding serial production as well as complex precision machining. Key Features: Dual spindle (main + sub spindle) Y-axis for off-center and complex machining Twin turret system (upper + lower turret) Live tooling capability Full spindle synchronization (simultaneous machining) High productivity with reduced cycle times Technical Specifications: Fgsdpfxoy D Rypo Ap Ioi Max. turning diameter: approx. 230 mm Max. turning length: approx. 300 mm Bar capacity: approx. 65 mm Spindle speed (main/sub): up to 5,000 rpm Spindle motor power: ~18.5 kW Y-axis travel: ±50 mm X/Z axis travels: approx. 205 mm / 350 mm Rapid traverse rates: up to 30 m/min Turrets: 2 × 12 stations Live tooling speed: up to 6,000 rpm Tool holders: BMT55 Control system: FANUC 18iTB C-axis: both spindles

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, travel distance X-axis: 1,300 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, controller manufacturer: Fanuc, controller model: Fanuc, table width: 670 mm, table length: 1,500 mm, table load: 1,300 kg, spindle speed (min.): 12,000 rpm, number of spindles: 1, Manufacturer: Doosan Model: DNM 6700 Year: 2018 Condition: (Used) Excellent Control: Fanuc Control Accessories: Kitagawa 4th Axis, Renishaw Spindle Probe, Tool Probe, Swarf Conveyor, Mist Extraction Unit & Manuals. LOCATION: COVENTRY, UNITED KINGDOM MACHINE SPECIFICATIONS Control: Fanuc Control X Axis Travel: 1300mm Y Axis Travel: 670mm Z Axis Travel: 625mm Fodpfxszwhtke Ap Iogi Max Workpiece Weight: 1300kg Spindle Speed: 12,000rpm Table Size: 1500 x 670mm Tool Change Capacity: 30 ATC Tool Size: BT40

Condition: excellent (used), Year of construction: 2021, operating hours: 4,300 h, DOOSAN T3600D VERTICAL MACHINING CENTRE YEAR: 2021 CONTROL: FANUC i PLUS X TRAVERSE: 520.0mm Fjdoz R T D Uopfx Ap Ijgi Y TRAVERSE: 360.0mm Z TRAVERSE: 350.0mm MAX. SPINDLE SPEED: 12,000 rpm TAPER: BT30 X-Y RAPIDS: 48.0m/min Z RAPID: 56.0m/min MAX.CUTTING FEED RATE: 28.0m/min TABLE SIZE: 2 X 650 X 375.0 mm

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Equipment: documentation/manual, We are offering a complete, integrated robotic CNC turning cell consisting of two DOOSAN vertical CNC turning centers and one KAWASAKI ZX-165U industrial robot. The machines and robot are exceptionally well preserved, regularly maintained and currently operating in our production facility in a two-shift environment. The robotic cell enables automated workpiece handling, loading and unloading between the CNC machines. This is an opportunity to acquire an existing production automation system rather than sourcing individual machines and commissioning a new integration. Fsdpjz Rqqqofx Ap Iogi 1. Complete cell – Included equipment • 1 × DOOSAN VT450TM-2SP CNC turning center • 1 × DOOSAN VT750TM-2SP CNC turning center • 1 × KAWASAKI ZX-165U industrial robot and robot control cabinet • Installed robot gripper / workpiece handling equipment • Safety fencing and protective enclosure • Robot-to-machine communication interfaces • Associated electrical and pneumatic automation components • Workpiece handling / storage stations and chip conveyors 2. Condition, inspection and advantages Both CNC machines and the Kawasaki robot are fully operational, regularly maintained and currently used in our manufacturing facility in Slovenia. The complete cell can be inspected under power and demonstrated during production by prior appointment. • Complete, existing robotic CNC turning solution • Two heavy-duty Doosan vertical turning centers with FANUC CNC controls • Driven tools and C-axis on both machines • Automated workpiece handling and reduced manual intervention • Excellent condition; regularly maintained • Live inspection and test run available 3. Typical applications Automated machining of flanges, bearing rings, gear components, housings, brake discs, large rotational components and other medium- to heavy-duty industrial workpieces, including steel and cast-iron parts. 4. Sales information The complete robotic cell is offered for sale as one integrated system. Additional photographs, video and technical information are available upon request. Inspection and test run by appointment

Condition: reconditioned (used), Year of construction: 2018, functionality: fully functional, turning length: 400 mm, turning diameter: 420 mm, spindle motor power: 22 W, spindle speed (min.): 30 rpm, spindle speed (max.): 3,000 rpm, travel distance X-axis: 268 mm, travel distance Z-axis: 488 mm, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 24 m/min, type of input current: three-phase, total height: 3,210 mm, total length: 3,600 mm, total width: 1,900 mm, overall weight: 6,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, USED ​​DOOSAN 3-axis CNC vertical lathe with live tools and C-axis Fgedpfjx Sqafsx Ap Ioi

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, feed rate X-axis: 45,000 m/min, controller manufacturer: HEIDENHAIN, controller model: TNC530, spindle speed (max.): 12,000 rpm, spindle nose: SK40, number of spindles: 1, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, Specifications Chip conveyor and set of tool holder. With hydraulic clamp with control unit. Fsdpfxj Ah S Eto Ap Iogi Table dimensions: 1200x540 mm Capacity Longitudinal X-travel: 1270 mm Cross Y-travel: 670 mm Vertical Z-travel: 625 mm Spindle Spindle nose: SK40 ISO Spindle speed: 12000 giri/min. Motor power: 18,5 Kw Rapid X,Y,Z axis: 45000 mm/min Tool Stations: 30 nr.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 570 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, torque: 118 Nm, controller manufacturer: FANUC, controller model: FANUC I SERIES, spindle speed (max.): 12,000 rpm, distance table to spindle center: 150 mm, spindle nose: BT40, number of slots in tool magazine: 30, Equipment: chip conveyor, CNC milling machine of medium dimensions, intended for both rough and fine processing. Fgodpfx Apj Af U Eze Iji A powerful motor in combination with high rigidity and a high-precision base spindle enable large removals and precision. The machine is a suitable answer to a wide range of requirements in production, especially in toolmaking. The machine is sold as a set with the equipment described in the listing. Machine is is good condition and regularly maintained. -15 " display -2MB part program storage - 1000 programs - 12.000 RPM spindle 18,5kW, 118Nm -BT40 -30 tools magazine - 12 bar through the spindle cooling -oil skimmer belt type -ethernet connection -coolant gun -ball screw nut cooling -tool breakage detection in magazine -automatic doors -robot interface -4th axis preparation -Hiwin RCV 250 rotary table -HIWIN RTS 250 suport -Hidraulic aggregate 200 bar 2 A+B -4th axis fixture support hydraulic (3x oil, 2x air) -seat air check -level sensor for coolant liquid -LNS MH500 chip conveyor -mist collector interface

Condition: like new (used), Year of construction: 2026, operating hours: 42 h, functionality: fully functional, overall weight: 9,500 kg, fuel type: diesel, power: 504 kW (685.25 HP), output current: 910 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: AC, nominal power: 504 kW (685.25 HP), nominal power (apparent): 630 kVA, continuous power (apparent): 800 kVA, total length: 5,000 mm, total width: 245 mm, total height: 2,650 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Doosan, type of cooling: water, fuel: diesel, input voltage: 400 V, input frequency: 50 Hz, rotational speed (min.): 1,500 rpm, type of input current: three-phase, We have the following emergency power generators or grid replacement systems from our series production for sale, with the following technical specifications: Condition: New, 2026 Engine: Doosan DP180LB Rated power: 700 kVA / 560 kW Speed: 1500 rpm Fsdpfxewqai He Ap Iegi Frequency: 50 Hz Rated voltage: 231/400 V - Includes batteries - Includes diesel tank (1000L) - Includes circuit breaker 4P ABB XT7S - Includes control system (island operation). - Optionally, a control system for grid-parallel operation, load distribution, and peak load management is available at an extra cost. Seamless integration into your energy infrastructure. Complete unit installed as a compact system in a soundproof, weatherproof container. Dimensions: 600x245x270cm (LxWxH) Weight: 10,500 kg Warranty: 24 months or 2000 operating hours. The emergency power generator will be delivered in operational condition, including a logged load test of 60 minutes. Delivery, installation, and commissioning are available at an extra cost. Price: €69,000 net Immediately available.

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 510 mm, feed rate X-axis: 36 m/min, feed rate Y-axis: 36 m/min, feed rate Z-axis: 36 m/min, controller manufacturer: FANUC, controller model: i Series + Easy Operation Package, total height: 2,950 mm, total length: 2,160 mm, total width: 2,615 mm, table width: 450 mm, table length: 1,000 mm, table load: 600 kg, overall weight: 5,000 kg, spindle speed (min.): 0 rpm, spindle speed (max.): 8,000 rpm, operating hours of spindle: 5,025 h, coolant supply: 20 bar, spindle motor power: 18,500 W, spindle nose: SK40 (DIN69871), number of spindles: 1, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, We acquired this machine in working condition directly from the first owner, after it had completed its production cycle. The Doosan DNM 4500 from 2016, equipped with a FANUC control system, is a reliable 3-axis vertical CNC machining center. It is particularly suitable for general milling operations, working with steel/stainless steel/aluminum, and for series production. The machine will be fitted with 2 new original windows (currently on order)! Fgsdpfx Aszzdh Esp Ioi Additional options & accessories: - Internal cooling (20 bar) - Electronic handwheel - DOOSAN Easy Operation Package - Chip conveyor - HAIMER 3D probe - AOF mist extraction system - Oil skimmer - Preparation for a 4th axis - All original documentation.

Condition: good (used), Year of construction: 2014, operating hours: 8,035 h, functionality: fully functional, machine/vehicle number: MH0017-000100, travel distance X-axis: 1,400 mm, travel distance Y-axis: 1,050 mm, travel distance Z-axis: 1,200 mm, controller manufacturer: fanuc, controller model: 31i, operating hours of spindle: 6,000 h, New Doosan horizontal machining center type NHP 8000 with Fanuc control unit type 31i Included equipment and options: Pallet centering system 800*800 Coolant supply with hand gun High-pressure coolant 70 bar, 7.5 kW with cyclonic filtration Automatic tool changer Tool load management Chip conveyor Renishaw RMP60 workpiece probe TS27R tool probe Fgsdpjwu Rgqofx Ap Iei

Condition: used, Year of construction: 2013, functionality: fully functional, turning diameter: 370 mm, spindle bore: 76 mm, spindle speed (max.): 3,500 rpm, rotational speed (max.): 712 rpm, Equipment: rotational speed infinitely variable, DOOSAN LYNX300M (32,000 euros) - CNC: FANUC - Chuck diameter: 250 mm - Swing over bed: 651 mm - Max. turning diameter: 370 mm - Max. turning length: 712 mm - Spindle bore: 76 mm - Spindle speed: 3,500 rpm - C-axis - Main spindle motor: 15 kW - Rapid traverse rates X/Z: 30/24 m/min - BMT 55 turret: 12 positions - Rotating tool speed: 5,000 rpm - Machine weight: 3.6 t - Overall dimensions: 3 x 1.8 x 1.7 m Fgodpfx Apj Ady Hto Isi

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, controller manufacturer: HEIDENHAIN, controller model: TNC-620, workpiece weight (max.): 1,300 kg, total height: 3,100 mm, total length: 4,400 mm, total width: 2,450 mm, table width: 670 mm, table length: 1,600 mm, overall weight: 9,000 kg, spindle speed (min.): 80 rpm, spindle speed (max.): 12,000 rpm, coolant supply: 20 bar, distance table center to spindle nose: 775 mm, spindle nose: ISO 40, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, Used 3-axis vertical machining center with Heidenhain TNC-620 CNC Fjdpfx Aps Afpq Rj Isgi

Condition: ready for operation (used), Year of construction: 2024, operating hours: 54 h, travel distance X-axis: 1,630 mm, travel distance Y-axis: 762 mm, travel distance Z-axis: 650 mm, controller manufacturer: FANUC, controller model: i-Series, total height: 3,170 mm, total width: 3,850 mm, table width: 1,630 mm, table length: 760 mm, table load: 1,500 kg, overall weight: 13,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 28,000 W, number of slots in tool magazine: 30, tool weight: 8,000 g, product length (max.): 3,480 mm, number of axes: 3, This 3-axis DOOSAN DNM 750 II was manufactured in 2023. It features a generous X-axis travel of 1,630 mm, Y-axis travel of 762 mm, and Z-axis travel of 650 mm. The machine has a maximum table load capacity of 1,500 kg and a spindle speed range of up to 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the DOOSAN DNM 750 II vertical machining centre we have for sale. Contact us for further details. - Manufacturer: DN SOLUTIONS- Model: DNM 750 II- Year of Manufacture / Build Date: 12/2023- CNC Control: FANUC i-Series (Fanuc F0i Touch with Manual Guide / EZ Guide and Fanuc HMI)- Screen Size: 15" Touch Screen- Operating Hours:* Control On (STRG EIN): 299 h 5 min* Operating Time / Run Time: 53 h 54 min 14 s* Machining Time: 40 h 15 min 28 s* Cycle Time: 0 h 0 m 0 s- Travel X-Axis: 1,630 mm- Travel Y-Axis: 762 mm- Travel Z-Axis: 650 mm- Table Size: 1,630 x 760 mm- Table Surface: T-slots (5 - 125 x 18H8)- Max. Workpiece Dimensions / Height: 725 mm- Max. Table Load Capacity: 1,500 kg- Distance Spindle Nose to Table Surface: 150 - 800 mm- Rapid Traverse (X / Y / Z): 30 / 30 / 24 m/min- Max. Cutting Feedrate: 12,000 mm/min- Acceleration / Deceleration Time (X / Y / Z): 150 / 160 / 150 ms- Axis Drive Motor Power (X / Y / Z): 4 / 4 / 4 kW- Ball Screw Diameter x Lead (X / Y / Z): 45 x 12 mm / 45 x 12 mm / 45 x 10 mm- Positioning Accuracy (X / Y / Z): 0.014 mm / 0.008 mm / 0.008 mm- Repeatability (X / Y / Z): 0.007 mm / 0.005 mm / 0.005 mm- Spindle Speed Range: Up to 12,000 rpm- Spindle Drive Type: Direct Connection (Type 2)- Spindle Motor Power (Continuous / S3 25%): 11 kW / 28 kW- Spindle Base Speed: 1,500 rpm- Max. Spindle Torque: 159.3 Nm (S3 15%)- Spindle Clamping Force: 7.35 kN- Tool Holder Taper: SK40 (converted to SK40 per order confirmation DIN 69871 / ISO 7388-3; convertible to BT40 / BBT40)- Spindle Cooling Tank Capacity: 40 L (Cooling capacity 1.56 kW at 50 Hz / 1.76 kW at 60 Hz)- Tool Storage Capacity: 30 tool stations- Tool Selection Type: Memory Random- Max. Tool Diameter (Continuous): 80 mm- Max. Tool Diameter (Adjacent Pots Empty): 125 mm- Max. Tool Length: 300 mm- Max. Tool Weight: 8 kg- Max. Tool Moment: 5.88 Nm- Tool-to-Tool Time: 1.6 s (50 Hz) / 1.3 s (60 Hz)- Chip-to-Chip Time: 4.0 s (50 Hz) / 3.7 s (60 Hz)- Through-Spindle Coolant (TSC / IKZ): Middle pressure, 4.0 kW pump, 20 bar, 25 µm cyclone filter- External Flood Coolant: 1.8 kW pump, 7 bar, 30 L/min- Coolant Flush Pump (Inside Flushing): 1.1 kW, max. 0.75 MPa (50 Hz), 20 L/min- Coolant Tank Capacity: 520 L- Coolant Gun: Included (with separate pump 0.6 kW)- Air Gun: Included- Spindle Compressed Air Blow: Compressed air outlet above spindle for chuck/fixture cleaning- Oil Skimmer: Belt type- Mist Collector / Oil Mist Extraction: Dormatec AF-30P (0.75 kW, 29 m³/min capacity, 200 mm inlet, H13 filter, 99. Fgjdpfx Apo Ahpqms Isi

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: H2017, overall weight: 68 kg, load capacity: 20 kg, arm reach: 1,700 mm, pivoting range: 360 °, type of input current: three-phase, The Doosan H2017 is an advanced collaborative robot (cobot) that combines high performance with maximum safety and precision. With a lifting capacity of up to 20 kg and a reach of 1,700 mm, the H2017 is ideal for heavy and space-intensive tasks in industry, production, and logistics. The robot is equipped with six integrated high-performance torque sensors, which ensure extremely precise motion control and safe operation in collaboration with humans. This technology makes the H2017 particularly suitable for tasks where both strength and sensitivity are crucial – such as palletizing, machine tending, assembly, and handling of heavy items. Benefits of the Doosan H2017: ✅ High payload of 20 kg – perfect for heavy lifting ✅ Long reach (1,700 mm) – increased flexibility and coverage ✅ Six torque sensors – precise, stable, and safe collaboration Fgjdpfez Sxc Rjx Ap Ioi ✅ Intuitive programming – quick implementation and startup ✅ Advanced safety features – meets international standards ✅ Robust and reliable design – suitable for industrial environments Ideal for: Palletizing and depalletizing Machine tending Assembly and joining Internal logistics and material handling Automation of manual and ergonomically demanding tasks With the Doosan H2017, you get a future-proof cobot that increases productivity, reduces the strain on employees, and delivers consistently high quality – every time. Availability: We have some almost new Doosan H2017 units for sale – still in their original packaging.

Condition: good (used), functionality: fully functional, Year of construction: 2012, operating hours: 8,235 h, Internal combustion forklift Machine brand: DOOSAN Model: D90S-5 Year of manufacture: 2012 Hour meter reading: 8235 Own weight (kg): 12197 Load capacity (kg): 9000 Lifting height (mm): 3100 Side shift forks Mast type: STD Fedpfxoz E S Eqo Ap Iegi Fuel type: diesel Recently underwent a major technical inspection at 8060 operating hours. - new tires - new forks - cylinder regeneration - transmission: discs + seals - brakes: discs and bearings - all oils, fluids, and filters Technical condition: used, good

Condition: used, Year of construction: 2006, MAKE DAEWOO DOOSAN, MADE IN KOREA MODEL MYNX SERIES NM 410 YEAR 2006 CONTROL FANUC 0iMC TABLE SIZE 920.0 x 430.0mm TRAVERSES (X, Y, Z axes) 762.0 x 410.0 x 510.0mm SPINDLE SPEED Upto 8,000rpm Fgodj Ah Td Sepfx Ap Ioi SPINDLE SIZE BT 40 ATC 20 stations SPINDLE POWER 11.0Kw/15.0HP MAX. TABLE LOAD 600.0kgs MACHINE DIMENSIONS 2200.0 x 2600.0 x 2600.0 mm MACHINE WEIGHT 5000kgs PLUS SIDE ARM TOOL CHANGER COOLANT SYSTEM SET OF MANUALS

Condition: like new (used), Year of construction: 2024, functionality: fully functional, turning length: 1,275 mm, turning diameter: 481 mm, spindle bore: 102 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 20 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,350 mm, spindle motor power: 26 W, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 30 m/min, total height: 1,907 mm, total length: 5,300 mm, total width: 2,105 mm, type of input current: three-phase, overall weight: 6,900 kg, spindle nose: ASA 11, Equipment: documentation/manual, rotational speed infinitely variable, USED ​​2-axis CNC lathe "DN Solutions model PUMA GT3100L" with DN Solutions-Fanuc i-Plus iHMI CNC complete with chip conveyor, Morari self-centering steady rest with 15-170mm opening, automatic doors, 12-position turret, auto power off and tool life management. Fodpfx Aewuti Usp Ijgi

Condition: excellent (used), Year of construction: 2016, Swing over bed 600mm, swing over carriage 400mm, 65mm bar capacity, machining diameter 350mm, machining length 330mm, 12 position turret, Fanuc series I control, Spindle 4500 rpm, Fjdez Rz Aqepfx Ap Isgi swarf conveyor, tool setter, tailstock

Condition: excellent (used), Year of construction: 2007, operating hours: 60,000 h, functionality: fully functional, travel distance X-axis: 240 mm, travel distance Z-axis: 450 mm, chuck outer diameter: 381 mm, spindle speed (min.): 2,500 rpm, turning diameter: 580 mm, total length: 2,900 mm, total height: 2,770 mm, total width: 2,700 mm, turning length: 450 mm, turning height: 450 mm, overall weight: 13,000 kg, Equipment: documentation/manual, Used DOOSAN Mecatec V450TM twin-spindle CNC vertical turning centre, fitted with FANUC Series 18i-TB CNC control. The machine has been modified with two SAUTER VDI50 tool turrets, each offering 12 tool stations and driven-tool capability (24 tool positions in total). C-axis. Turret arrangement supports combined turning, drilling and milling operations. Fodez Sx Nkopfx Ap Isgi

Condition: used, Year of construction: 2007, functionality: fully functional, spindle bore: 52 mm, spindle speed (max.): 6,000 rpm, spindle motor power: 15 W, overall weight: 3,500 kg, For sale: DOOSAN LYNX 220MA CNC turning center, year 2007, equipped with driven tools, C-axis, and FMB SL 80 S automatic short-bar feeder. Technical specifications Manufacturer: DOOSAN Infracore Model: LYNX 220MA Year of manufacture: 2007 CNC control: DOOSAN-FANUC Maximum turning diameter: 250 mm Maximum turning length: 290 mm Maximum bar capacity: 51 mm Main spindle speed: 6,000 rpm Main spindle motor: 15 / 11 kW Chuck size: 6" Turret: 12 stations Driven tools / live tooling: Yes Maximum live tool speed: 6,000 rpm Live tooling motor: 3.7 kW C-axis: Yes Included equipment FMB SL 80 S automatic short-bar feeder Fgsdpe Aay Ntjfx Ap Isi Driven-tool turret C-axis for milling and drilling operations Chip conveyor Tool holders visible in the photographs The machine is suitable for automatic bar machining, including turning, drilling, tapping, and milling operations. Location: Slovenia, EU

Condition: good (used), Year of construction: 2010, operating hours: 115,503 h, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, torque: 100 Nm, controller manufacturer: Fanuc, workpiece width (max.): 670 mm, workpiece weight (max.): 1,000 kg, total height: 2,940 mm, total width: 2,750 mm, table width: 670 mm, table length: 1,400 mm, table load: 1,000 kg, spindle speed (max.): 12,000 rpm, coolant supply: 8 bar, spindle motor power: 15,000 W, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 420 V, type of input current: three-phase, Equipment: documentation/manual, BT 40. No chip conveyor. Fgsdpfx Aeyx U Nwep Iei

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 30,280 h, The Doosan DL550 machine shown in the picture is for sale in good condition. Bucket size: 5.8 m3. Regularly maintained, ready for immediate operation. It can be viewed while in operation. Technical specifications: Category: Wheeled loader Operating hours: 30,280 hours Emissions sticker: 4 (Green) Year of manufacture: 2014 Equipment: Central lubrication system; Four-wheel drive; Particulate filter Tire condition: 75%. Delivery: EXW Székesfehérvár, Hungary. Fsdpozd Sk Hjfx Ap Isgi An optional 16 m3 bucket is available at an additional cost.

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 1,525 mm, travel distance Y-axis: 762 mm, travel distance Z-axis: 625 mm, overall weight: 13,500 kg, spindle speed (max.): 12,000 rpm, number of axes: 3, This 3-axis DOOSAN Mynx 7500 was manufactured in 2011. It features an impressive X-axis travel of 1,525 mm, Y-axis travel of 762 mm, and Z-axis travel of 625 mm. The machine is equipped with a spindle speed of 12,000 rpm and a tool changer capacity of 30 stations. If you are looking to get high-quality machining capabilities, consider the DOOSAN Mynx 7500 vertical machining centre we have for sale. Contact us for further details. - Control Unit: DOOSAN-FANUC i Series - Tool Changer Capacity: 30 stations - Through-Spindle Coolant (TSC): 20 bar - External Coolant: Yes - Measuring Probe: Renishaw probe - Operating Hours - Cutting Time: 40,592 h - Operating Hours - Cycle Time: 2,760 h - Operating Hours - Part Count: 277 - Power Supply: AC 200/220V, 3 Phase, PE, 50/60 Hz - Rated Power: 38.35 kVA - Full Load Current: 137.34 A - Interrupting Capacity: 5 kA - Short Circuit Capacity: 10 kA - Total Machine Weight: 13,500 kg Technical Specification Fgjdpfx Aj Ah Exdop Isi Taper Size SK 40

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, a very stable machine that operates without any issues – it is only used for machining aluminum plates. Fsdpfozmzcqsx Ap Iegi