Used Doosan Hp 5500 for sale (315)

Condition: used, power: 127 kW (172.67 HP), lifting height: 2,750 mm, Year of construction: 2015, operating hours: 6,540 h, Year of manufacture: 2015 Bwjdpfx Aexavakodxow Empty weight: 14.400 kg Dimensions (LxBxH): 772 x 264 x 328 cm Engine type: Doosan Doosan DL06K Tier IIIB Bucket volume: 2.5 m^3

Condition: used, Year of construction: 2007, turning diameter 300 mm turning length 600 mm control FANUC, 18i-TB turning diameter over bed slide 230 mm travel x1 165 mm travel z1 700 mm travel x2 190 mm travel z2 720 mm travel -y axis +/- 50 mm main spindle bore 76 mm main spindle speed 5.000 U/min main spindle drive 22 kW max. torque on the spindle 208 Nm sub spindle bore 76 mm sub spindle speed 5.000 U/min sub spindle drive 22 kW max. torque on the spindle 208 Nm tool turret 2 x 12 Stat. number of driven tool stations 2 x 12 speed of driven tools 5.000 U/min max. torque 47 Nm work piece power 5,5 kW C-axis resolution 0,001 ° rapid traverse x + z axis 20 / 40 m/min Bsdpfx Asxn Amtsdxjww rapid traverse y-axis 7,5 m/min total power requirement 68,4 kVA weight of the machine ca. 7,8 t Accessories: collet fixture on main spindle, hydr. 3-jaw chuck make KITAGAWA, BB 208, 210 mmø, on sub spindle, various tool holders for turret, bar loader make HYDRAFEED, model MULTIFEED MX-1B for bar dia. 3 - 80 mm and bar length up to 1650 mm, chip conveyor, coolant with belt filter device

Year of construction: 2004, condition: good (used), We are offering a Doosan Puma 2000 LSY with bar feeder: - Year 2004, 9,400 operating hours - Fanuc 18i-TB - LNS Servo 2 bar feeder Bedpfjxk Uz Iex Adxeww - Tool measurement system - Chip conveyor - 12 tool stations - x, y, x, b = 250, ±50, 830, 830 Under power

Condition: good (used), Year of construction: 2018, CNC lathe DOOSAN Puma 4100XLMC with Fanuc control; Only 2,000 spindle hours!!! Bodpfx Ajxqg Rzodxjww 3m turning length with programmable hydraulic steady rest SLU 4; Spindle bore 165 mm; All axes are flat-guideways – suitable for heavy-duty machining; Spindle with gearbox – over 2,400 Nm; Chip conveyor, tool setter, extraction system; 380 mm chuck installed, plus an additional 530 mm chuck; Various fixed and driven tool holders;

Condition: used, Torni CNC Bjdpow Slx Uofx Adxjww Doosan Puma TW2600 2016 (low hours) complete with robot it can be inspected in our warehouse in Gussago BS

Condition: good (used), Year of construction: 2012, operating hours: 7,735 h, lifting height: 4,660 mm, fuel type: diesel, mast type: triplex, fork length: 1,200 mm, Year of manufacture: 2012 Lifting capacity: 3.000 kg Maximum passing height: 215 cm CE mark: yes Technical condition: good Visual appearance: good Bedpoxpg Tmefx Adxjww Please contact Mergim Bricori for more information

Condition: used, fuel type: diesel, color: orange, lifting height: 4,050 mm, Year of construction: 2015, operating hours: 6,470 h, Year of manufacture: 2015 Empty weight: 6.000 kg Bedpfsxb Ayasx Adxsww Dimensions (LxBxH): 567 x 198 x 255 cm Engine type: Yanmar Yanmar 4TNV94L

Condition: used, Year of construction: 2018, operating hours: 7,450 h, Serial number: DHKCEWBSVH500xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20213 Specifications: - 2018 model - 7450 Hours (will increase slightly) - 17,700 kg - 102.1 kW - Articulated boom - Blade - Central lubrication - G60 HK-mount Bedpfjwdvg Ijx Adxsww - Stage 5 engine - 4 new rear tires - K80 trailer with electric hydraulics - Engcon ec219 rototilt - 650 l Gjerstad sanding bucket (new knife) - Tool cabinet - Wheel guards - Support legs - Blade - Lights - Air conditioning/ac - Radio - Ready to deliver Description: We have a 2018 Doosan DX165W-5 wheeled machine w/ K80 trailer hitch with electric and hydraulics, articulated boom, Engcon ec219 rototilt, Gjerstad sanding bucket for sale.u The machine is well maintained and cared for by the owner. It will be serviced again before sale. Ready for delivery Hours: 7450 Own weight: 17700 Total Weight: 17700 Kw: 102,1 Model: DX165W-5

Condition: used, Year of construction: 2016, operating hours: 11,200 h,

Condition: used, functionality: fully functional, machine/vehicle number: FBA20139000275, Year of construction: 2018, operating hours: 8,825 h, load capacity: 3,500 kg, lifting height: 3,495 mm, fuel type: electric, mast type: standard, construction height: 2,400 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift Chassis number: FBA20139000275 Load center: 500 Fork width: 1300 mm Mast type: Standard Condition: Ready for operation and fully functional Technical condition: Good Bsdpfjxn Ehtex Adxeww Front tire type: Superelastic Rear tire type: Superelastic Battery voltage: 80V

Condition: new, Year of construction: 2024, fuel type: diesel, motor manufacturer: Doosan DP222CC, General information Field of application: Construction Weights Empty weight: 6.200 kg Functional Generator capacity: 1.000 kVA Other information Fuel consumption: 147 Liter / Hour at 75% Load Generator: Leroy Somer TAL-A49D Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 1130 l Transport dimensions (LxWxH): 5x2x2,5 Bwedpfsthb Icsx Adxew Additional information Please contact Tijmen Pesselse, Kenny Bongers, Arjen van Dijk or DPX Power for more information

Condition: excellent (used), Year of construction: 2022, operating hours: 5,500 h, functionality: fully functional, Fanuc control, commissioned in 2023, two turrets, all stations driven, Y-axis on upper turret, sub-spindle, parts catcher, Hainbuch chuck, chip conveyor, short bar loader, accessories. Bsdpfexnpcusx Adxjww

Condition: used, lifting height: 4,650 mm, Year of construction: 2017, operating hours: 6,590 h, Year of manufacture: 2017 Empty weight: 8.500 kg Digging depth: 4.175 m Bwedpfx Asxqfhledxjw

Condition: used, Year of construction: 2019, operating hours: 4,542 h, Serial number: D1N0DA30LK074xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21136 Specifications: Model year: 2019 Hours: approx. 4,542 Power: 270 kW / 375 hp Drive: 6x6 Tires (see photos) Road registration (white plates) High tailgate Central lubrication Reversing camera LED work lights Radio / CD Air conditioning / AC Bsdpow Rkcpsfx Adxjww Length: 955 cm Width: 299 cm Wheelbase: 411 / 177 cm Operating weight: 24,600 kg Max payload: 26,825 kg Description: 2019 Doosan DA30 articulated dump truck.The machine is equipped with central lubrication, high tailgate, and a reversing camera.It has been under a service agreement and is well maintained.Ready for delivery on short notice. HK: 375 Hours: 4542 Own weight: 24600 Model: DA 30 Dumper

Condition: used, Year of construction: 2016, operating hours: 6,800 h,

Condition: used, Year of construction: 2018, operating hours: 5,156 h, 2018 | Doosan DX235LCR-5 | Used Tracked Excavator | 5156 hours 📍Location: Germany, Wilsdruff 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 115500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 64 inspection points 58 approved ✅ 3 imperfect ℹ️ 3 issues ⚠️ 📌 Inspector's Comment: Crawler excavator Doosan DX235LCR-5 from 2018. short tail version. the boom measures 5.80m (basic boom 3.10m, adjustable part 2.90m) and the stick 2.40m. floor plate width 600mm. the condition of the machine corresponds to the value of the operating hours. the machine shows wear on pins and bushings corresponding to the age and mileage as well as the purpose of use, as well as signs of use (dents, abrasions, etc.). at the time of the inspection, the machine ran/functioned without any abnormalities. maintained machine. the sprocket/turas should be replaced. the customer has decided to keep the backhoe bucket after the inspection. the illustrated backhoe bucket is therefore NOT included in the sale! 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "33296 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options Bjdpfx Aoxmv U Isdxeww 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: new, Year of construction: 2024, fuel type: diesel, motor manufacturer: Doosan DP180LB, General information Field of application: Construction Serial number: DV18-OOG10217012 Weights Empty weight: 5.650 kg Functional Generator capacity: 710 kVA CE mark: yes Other information Fuel consumption: 103.8 Liter / Hour at 75% Load Generator: Leroy Somer TAL-A473 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 1000 l Bwodpfx Aju Sfncjdxow Transport dimensions (LxWxH): 4,4x1,8x2,5 Additional information Please contact Tijmen Pesselse, Kenny Bongers, Arjen van Dijk or DPX Power for more information

Year of construction: 2008, condition: ready for operation (used), General Data Measurements width 1900 mm Measurements depth 4200 mm Measurements height 1750 mm Machine weight 4140 kg Control Unit Brand FANUC Main Drive Spindle speed range 4500 Number of axis 2 Movement X-Axis Movement 205 mm Z-Axis Movement 580 mm Workpiece Workpiece drm over bed 550 mm Workpiece drm over support 300 mm Bwjdexg Unyepfx Adxjw Tools Number of station 12 This 2-axis DOOSAN PUMA 240MB was manufactured in 2008. It features a maximum swing over bed of 550 mm, a bar capacity of 65 mm, and a spindle speed up to 4500 rpm. Equipped with a FANUC i-series CNC, 12-station turret with driven tools, and a chip conveyor. Ideal for precision turning operations. Contact us for more information about this machine. Application Types Turning

Condition: used, power: 127 kW (172.67 HP), fuel tank capacity: 255 l, color: orange, lifting height: 2,750 mm, Year of construction: 2014, operating hours: 5,420 h, Year of manufacture: 2014 Bwodpfx Aexqfcisdxsw Empty weight: 14.400 kg Dimensions (LxBxH): 772 x 264 x 328 cm Engine type: Doosan Doosan DL06K Tier IIIB Bucket volume: 2.5 m^3

Condition: used, Year of construction: 2017, operating hours: 24,500 h, Serial number: DIN0DA30LH074xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21134 Bedpfew Ruyxjx Adxoww Specifications: 2017 model Approx. 6870 hours Approx. 24,500 km Power: 270 kW (375 hp) Tires (see photos) Road registered (white plates) High tailgate Central lubrication Length: 955 cm Width: 299 cm Wheelbase: 411 / 177 cm Curb weight: 24,300 kg Max payload: 27,125 kg 6x6 Reversing camera LED work lights Radio/CD Air conditioning Description: 2017 Doosan DA30 articulated dump truck for sale.Equipped with central lubrication, high tailgate, and reversing camera.Ready for quick delivery. Hours: 24500 Own weight: 24300 Model: DA 30 Dumper

Condition: used, Year of construction: 2014, operating hours: 9,600 h,

Condition: used, Year of construction: 2023, operating hours: 1 h, machine/vehicle number: 20220914013, fuel type: diesel, motor manufacturer: Doosan DP180LA, General information Field of application: Construction Weights Empty weight: 4.800 kg Functional Generator capacity: 630 kVA Bsdpfx Adow Sraroxeww CE mark: yes Other information Fuel consumption: 94.2 Liter / Hour at 75% Load Generator: Leroy Somer TALA473E Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 1000 l Transport dimensions (LxWxH): 4,35x1,8x2,35 Additional information Please contact Tijmen Pesselse, Kenny Bongers, Arjen van Dijk or DPX Power for more information Surplus unused 2023 generator. Only some visible spots of weather wear on the canopy due to outdoor storage on our previous location at Oudenbosch 2 similar units in stock

Year of construction: 2007, condition: ready for operation (used), General Data Measurements width 1700 mm Measurements depth 3280 mm Measurements height 1650 mm Machine weight 3500 kg Control Unit Brand FANUC Model Oi-TC Main Drive Bsdpfx Aexg Untsdxjww Spindle speed range 6000 Number of axis 2 Movement X-Axis Movement 175 mm Z-Axis Movement 550 mm Workpiece Workpiece drm over bed 550 mm Workpiece drm over support 300 mm Turret Rotating tools Yes Tools Number of station 12 Media Chip conveyor Yes This DOOSAN LYNX 220 LMA was manufactured in 2007. A robust horizontal turning machine featuring a maximum swing over bed of 550 mm and a bar capacity of 61 mm. It includes a 12-station turret with driven tools, a spindle speed up to 6000 rpm, and a CNC FANUC Oi-TC. Ideal for precision machining with its comprehensive tooling options and chip conveyor system. Contact us for more information about this machine. Application Types Turning

Condition: used, color: orange, lifting height: 3,410 mm, Year of construction: 2019, operating hours: 3,030 h, Year of manufacture: 2019 Empty weight: 3.500 kg Dimensions (LxBxH): 465 x 170 x 252 cm Digging depth: 4.88 m Bwedpfx Adjxqfb Eoxow

Condition: used, Year of construction: 2015, operating hours: 13,120 h,