Used Doosan Dx 190 W for sale (298)

Condition: good (used), Year of construction: 2014, 900mm Swing, 650mm max. machining diameter, 992 mm maximum turning length, 1000rpm spindle, Spindle bore 275mm, 10 station turret 45kW spindle motor, Itedpfx Aajwwtrbolsd FANUC Series 32i control, 3 Jaw Power Chuck, Tailstock, Swarf Conveyor, Coolant,

Condition: good (used), Year of construction: 2013, Traverses X Y Z: 1020 x 540 x 535mm, Table 1200 x 540mm, Spindle speed 8000 rpm, Spindle taper BT50, Ijdpfoxv Udgsx Aalstd Spindle Motor 20kW, FANUC I series Control, 24 Station ATC, through spindle coolant, swarf conveyor, Low Volt light.

Condition: excellent (used), Year of construction: 2014, 1000mm Swing, 760mm max. machining diameter, 1540mm max turning length, 4000rpm main spindle, 76mm bar capacity, 12000rpm milling 18.5kW, C axis 0.001 degrees, Y axis -/+115mm, 40 station ATC, 12 station lower turret, milling speed 4,000rpm, Isdpfjw I Tniox Aaletd 22kW spindle motors, FANUC 31i control, 3 Jaw Power Chuck, Swarf Conveyor, Coolant

Condition: used, power: 127 kW (172.67 HP), lifting height: 2,750 mm, Year of construction: 2015, operating hours: 6,780 h, Year of manufacture: 2015 Empty weight: 14.400 kg Dimensions (LxBxH): 772 x 264 x 328 cm Ijdpfx Aajx Hgqijlstd Engine type: Doosan Doosan DL06K Tier IIIB Bucket volume: 2.5 m^3

Condition: ready for operation (used), Year of construction: 2011, General Data Machine weight 6500 kg Control Unit Brand FANUC Main Drive Number of axis 3 Movement X-Axis Movement 1020 mm Y-Axis Movement 540 mm Z-Axis Movement 510 mm Additional Equipment Through-spindle cooling Preparation for 4th axis External cooling unit This 3-axis DOOSAN DNM 500 was manufactured in 2011. It features a robust table size of 1200 × 540 mm and axis travels of 1020 × 540 × 510 mm. Equipped with through-spindle cooling and preparation for a 4th axis, it offers enhanced machining capabilities. Consider the opportunity to buy this DOOSAN DNM 500 vertical machining centre. Contact us for more information. Iedpfx Aox D Igdjalotd Application Types Milling

Condition: like new (used), Year of construction: 2019, operating hours: 1,210 h, load capacity: 2,500 kg, lifting height: 4,700 mm, mast type: triplex, front tire type: cushion tires (black), rear tire type: cushion tires (black), forklift 2500 kg diesel Iodpfxeycw R De Aalstd

Condition: excellent (used), functionality: fully functional, overall weight: 750 kg, Year of construction: 2016, operating hours: 1,236 h, Equipment: trailer coupling, Compressor 3100 l/min on trailer in very good condition 750 kg Ijdpfx Aoycw Ngealetd

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, turning length: 513 mm, turning diameter over cross slide: 300 mm, spindle speed (min.): 4,500 rpm, spindle bore: 76 mm, travel distance X-axis: 200 mm, travel distance Z-axis: 580 mm, DOOSAN PUMA 240MS LATHE WITH SUBSPINDLE AND BAR FEEDER Isdpfeyivakex Aaletd

Condition: excellent (used), Year of construction: 2014, operating hours: 9,000 h, functionality: fully functional, Vertical machining center model Doosan DNM 400 II available from the end of September, year 2014, in excellent condition. Equipped with Fanuc CNC, high-pressure pump, 12,000 rpm spindle in perfect condition, DIN40, 30 tools, automatic doors, tank with LNS chip conveyor. Roller guideways. Itjdpfx Aow Uk I Hjaljd

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 7,058 h, load capacity: 2,500 kg, lifting height: 3,300 mm, fuel type: gas, mast type: telescopic, construction height: 2,180 mm, fork length: 1,200 mm, drive type: Treibgas, LPG Forklift ISO Class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Telescopic Isdpjyadd Ssfx Aaletd Transmission: Torque converter Condition: Operational and fully functional Technical condition: Good Front tires type: Superelastic Front tires size: 7.00-12 Rear tires type: Superelastic Rear tires size: 6.00-9 Description: In addition to this device, we offer more forklifts and warehouse equipment. All our machines are workshop-inspected and comply with FEM4.004 standards. Please contact us by email or phone. You can also find us at hsr-gabelstapler. We are also happy to purchase your used equipment, even if you do not buy a vehicle from us. Leasing and financing at attractive conditions are available on request. We will gladly provide you with professional and comprehensive advice about our vehicles. Sideshift, 3rd valve, rear work light, front work light, internal mirror, beacon light, single pedal, seat,

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 319 h, load capacity: 3,500 kg, lifting height: 4,200 mm, fuel type: electric, mast type: telescopic, construction height: 2,800 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 500 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Telescopic Transmission: Electromechanical Condition: Operational and fully functional Technical condition: Standard Iedsyadd Eopfx Aalotd Front tires type: Superelastic Front tires size: 23x10-12 Rear tires type: Superelastic Rear tires size: 18x7-8 Battery voltage: 80V Battery capacity: 775Ah Battery manufacturer: Exide Battery type: PzS Battery year: 2019 Description: In addition to this unit, we offer further forklifts and warehouse equipment. All our machines are fully workshop-inspected and certified according to FEM 4.004. Please contact us via email or phone. You can also find us at hsr-gabelstapler. Of course, we are also interested in purchasing your used equipment, even if you do not buy a vehicle from us. Hire purchase and financing at favorable terms are available upon request. We are happy to offer you professional and comprehensive advice on our vehicles. Side shifter, fork positioner, 3rd valve, 4th valve, rear work light, front work light, load guard, safety light, interior mirror, revolving beacon, single-pedal control, LED, seat,

Condition: used, Year of construction: 2017, operating hours: 7,870 h, Year of manufacture: 2017 Itsdpfsx Hgtwex Aalod

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 125 h, load capacity: 3,000 kg, lifting height: 4,700 mm, free lift: 1,400 mm, fuel type: gas, mast type: triplex, construction height: 2,145 mm, power: 47 kW (63.90 HP), empty load weight: 4,850 kg, drive type: Treibgas, LPG forklift Load center: 500 mm ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Transmission: Torque converter Speed class: 20 Iedpfox Aw S Tjx Aalstd Condition: Like new Technical condition: New Front tire type: Superelastic Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire condition: 60 - 80% Sideshift, 3rd valve, 4th valve, Half-cab,

Condition: used, Year of construction: 2021, Technical details: rated capacity: 220 kVA Number of working hours: 0 h type of fuel: Diesel Ijdpfx Aaju U E Edslstd revolutions per minute of the motor:: 1500 rpm output voltage: 400 / 50 Hz V weight of the machine ca.: 2,2 t dimensions L x W x H: 3,3 x 1,2 x 2,24 m The generator is soundproofed. - NEW -New Diesel engine: -6-cylinder -type P086TI -with battery 2x 12Volt 90 Ah Generator: -alternating current -400Volt / 50Hz -current 318 A -speed 1500 rpm -protection class IP23 -Isolation class H *

Condition: used, machine/vehicle number: 26410, Year of construction: 2013, operating hours: 7,482 h, load capacity: 2,500 kg, lifting height: 3,190 mm, fuel type: diesel, mast type: simplex, construction height: 2,210 mm, Equipment: cabin, sideshift, Equipment details: Year of manufacture: 2013 Load capacity: 2,500 kg Lift height: 3,190 mm Hour meter reading: 7,482 h Mast type: Standard Mast height: 2,160 mm Dimensions (L/W/H): 2,500 / 1,170 / 2,210 mm Iodpfx Aasyg Dfpjljtd Operating weight: 4,200 kg Features: * Overhead guard * 3rd valve * 4th valve * Full cabin * Heater * Front work lights * Rear work lights Attachments: * Side shifter * Fork positioner * Load backrest Additional device information: Operating hours stated are generally as read from the meter. We are happy to offer you suitable transport. 250 - 300 forklifts, attachments and sweepers available immediately. Rental options also available! We are also interested in purchasing your USED machine. Do you have any questions? You can reach us during business hours from 7:30 am to 4:00 pm. We look forward to hearing from you! We speak English. Interim sale and errors in this offer are expressly reserved. For trade buyers, the equipment is sold in its current condition, not refurbished. All information subject to change and errors excepted.

Condition: used, Year of construction: 2006, turning diameter 320 mm turning length 322 mm control Fanuc D -iT greates pass round over bed 510 mm Itedpjya Ih Iefx Aalod x-axis 175 mm z-axis 330 mm spindle tunring speed 6.000 U/min spindle drive 15 kW number of tool places 12 Pos. auto power on hours ca. 43.947 In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Chip conveyor - Manual tailstock - Tool setter arm - Parts catcher with collection box Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Year of construction: 2014, operating hours: 25,000 h, condition: ready for operation (used), General Data Machine weight 3900 kg Control Unit Brand FANUC Model 0i-TD Itjdpjx D I T Rofx Aalsd Main Drive Number of axis 4 This 4-axis DOOSAN LYNX220LSYA horizontal turning machine was manufactured in 2014. It offers robust performance for precision turning operations. If you are looking to get high quality turning capabilities consider the DOOSAN LYNX220LSYA machine we have for sale. Contact us for more information. Application Types Turning

Condition: used, Year of construction: 2007, Multipallet Horizontal CNC Center Doosan HC500, year 2007. 7-pallet pallet system Fanuc 21i-MB control Spindle speed 8000 rpm ISO40 (BT) taper -X850mm -Y700mm -Z750mm 1-degree pallet indexing 60 tools Ijdpfx Aasycvpfoljtd Chip conveyor Through-spindle coolant (IKZ) Machine fully operational, available for inspection in France, 01360 Loyettes.

Condition: excellent (used), Year of construction: 2007, Doosan Puma 300MC C-axis with driven tools, 360° (0.001°) Year: 2007 Fanuc 21iTB with Manual Guide Chuck: 12 inch (315mm) Samchully Spindle bore: 102mm Max turning diameter: 355mm Axis travels: X - 250mm Z - 680mm Itsdpjyrb Ursfx Aaljd Turret: BMT 65 Tailstock Tool probe Chip conveyor, coolant tank with pump Tool holders Machine documentation Condition: very good

Condition: good (used), Year of construction: 2017, operating hours: 5,270 h, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 530 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 24 m/min, table load: 1,000 kg, Technical specifications MYNX 5400/50 CNC controller: Fanuc I series Axes: X-axis travel (mm): 1020 Y-axis travel (mm): 550 Z-axis travel (mm): 530 Work table: Table dimensions (mm): 1200 x 540 Maximum workpiece weight (kg): 1000 Spindle: Spindle speed (rpm): 6000 Spindle drive power (kW): 30 Spindle torque (Nm): 617 Equipment: Through-spindle coolant 20 bar Emulsion oil skimmer Pre-installed for 4th axis Axis and spindle load monitoring (tool load monitoring) Itjdpsytchpofx Aaljd 10.4" monitor Tool holder type: BT50 Number of tool magazine positions: 24 Chip conveyor Machine dimensions: Width (mm): 3350 Height (mm): 2920 Length (mm): 2467 Weight (kg): 7500

Condition: ready for operation (used), Year of construction: 2008, operating hours: 9,965 h, - USED - 3-AXIS VERTICAL MACHINING CENTRE WITH ROTO-PALLET X-AXIS TRAVEL: 560 mm Y-AXIS TRAVEL: 400 mm Z-AXIS TRAVEL: 570 mm DISTANCE SPINDLE NOSE-TABLE: 210 - 780 mm RAPID FEEDS X-Y-Z: 40 - 40 - 32 m/min SPINDLE: 80-10000 rpm; 15-18,5 kW; ISO 40 - BT PALLET: N.2 ; 712X475 mm MAX ADMITTED LOAD: 300X2 Kg HIGH PRESSURE COOLANT: 15 Bar TOOL MAGAZINE: CHAIN-TYPE ; 32 POS MAX TOOL DIAMETER: 90(150) mm MAX TOOL LENGHT: 300 mm MAX TOOL WEIGHT: 8 Kg CONTROL UNIT: FANUC 21i - MB WEIGHT: 7600 Kg OVERALL DIMENSIONS: 3010 x 3450 x 3145 mm Iedpeq Nqkxjfx Aaljtd

Condition: like new (used), Year of construction: 2021, Technical data XYZ travel: 1270/670/625 mm Table: 1400 x 670 mm Spindle speed: 12,000 rpm Tool magazine: 30 positions Isdpfx Aaoyinpgeljtd Spindle: ISO 40 Control: Fanuc Through-spindle coolant (IKZ): 20 bar Chip conveyor

Condition: good (used), Year of construction: 2011, Description: Itedpsyq Ifzofx Aaljd The machine is in good technical condition; a test run is possible after prior agreement. Max diameter: 65 mm, max length: 590 mm. Number of tools: 12. Power: 50.44 kVA. Machine specifications: Machine dimensions (L x W x H): Max D 65 mm, max L 590 mm.

Condition: good (used), Year of construction: 2015, functionality: fully functional, Machine parameters: Machine dimensions (L x W x H): D max. 51 mm, L max. 120 mm Description: The machine is in good technical condition; test operation is possible by prior arrangement. 54.7 kVA Number of tools: 12 Iodpfx Aaeyq Iaxolotd

Condition: used, machine/vehicle number: FBA17-1390-00445, Year of construction: 2018, operating hours: 2,790 h, lifting height: 4,730 mm, free lift: 1,600 mm, fuel type: electric, battery manufacturer: Midac, battery capacity: 620 Ah, battery voltage: 80 V, fork length: 1,200 mm, Empty weight: 4.790 kg Battery: 620 Ah, 80 V, Year of manufacture 2018, Brand of battery Midac Lifting capacity: 2.500 kg Maximum passing height: 220 cm Please contact Johanny Hendrikse for more information Isdpeuballofx Aaljtd