Used Doosan Dnm for sale (263)

Condition: used, Year of construction: 2022, 2-axis CNC lathe Doosan Puma GT2100B YEAR OF MANUFACTURE 2022 New Fanuc control system Machine with purchased option for a 250mm spindle bore and 81mm bar capacity!!! Spindle bore 81mm 10-inch (250mm) chuck Max. diameter 481mm Max. length 545mm Tailstock Tool probe Included with the machine: - Documentation - Chip conveyor with tank and pump Bsdpfx Acezud Nio Tsdg

Condition: good (used), Year of construction: 2008, Table size 1600 x 750 mm, Bedpfx Acoxwytcs Tsdg table load 1500 kgs, Traverses XYZ 1525 x 762 x 625 mm, rapid feedrates 24m/min, Spindle power 18.5 Kw, spindle speed 6,000rpm, 40 station ATC, spindle taper BT50, through spindle coolant, swarf conveyor, Fanuc 21i control.

Condition: excellent (used), Year of construction: 2020, Swing over bed 880mm, Swing over saddle 817 mm, Maximum turning diameter 550mm, maximum turning length 3070mm, bar capacity 116.5mm, Bdsdpfex I N Rbex Ac Teg Y axis +/- 75mm, Spindle speed 2000rpm, milling speed 4,000rpm, spindle power 37/30KW, 12 station turret, Fanuc IPlus control. 3 jaw chuck, tool setter, Hydraulic steady, swarf conveyor,

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 210 h, load capacity: 16,000 kg, lifting height: 4,500 mm, free lift: 1,470 mm, mast type: triplex, construction height: 3,035 mm, fork length: 2,400 mm, empty load weight: 26,850 kg, total length: 5,600 mm, construction width: 2,540 mm, Diesel forklift Load center: 1200 Mast type: Triplex Technical condition: very good Bdjdpfxozf Sfys Ac Teg Front tire type: Superelastic Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire condition: 80 - 100% Description: Very good, like-new condition. The unit will receive a new inspection and a new certification according to UVV (German regulations for occupational safety and health). Side shifter, fork positioner, 3rd valve, 4th valve, rear work light, front work light, roof protection, windshield, heater, air conditioning, full free lift,

Condition: excellent (used), Year of construction: 2008, DOOSAN MX2000ST 9 AXIS MILL TURN CENTER Sub spindle and bottom Turret Bsdpfeydigmsx Ac Tsdg Both spindles have 200mm power chucks on at the moment but we also have a Heinbuck collet chuck available good package of tooling Shown working on our motorsport jobs all done in one! Can be demonstrated if required.

Condition: used, Year of construction: 2022, functionality: fully functional, DOOSAN PUMA GT 3100 M – UNUSED, PRE-OWNED MACHINE WITH ROBOT CELL A Doosan Puma GT 3100 M, manufactured in 04/2022, which has never been used in production after commissioning by the supplier (February 13, 2023). 0 production hours, no workpiece contact, technically and visually in new condition. Includes a factory-installed robot cell for automated loading. Origin: Liquidation of a user's operations in the Nuremberg area. On-site or video call inspection possible. KEY FEATURES - 12″ main spindle, high power and high torque for steel and stainless steel machining - Driven tools VDI40/BMT 65P, milling, drilling and threading from the turret, complete machining in a single setup - Programmable tailstock with servo drive (Z2 axis) - Siemens Sinumerik 828D with 15″ touchscreen and ShopTurn workshop programming - 30° inclined bed, FEM optimized, cast iron - Halter LoadAssistant Universal Big 70 robot cell, mounted and ready for operation (see photos) FACTORY-INSTALLED SPECIAL EQUIPMENT (installed on the machine) - 24-tool turret BMT 65, Hirth gearing (1 s/position) - Automatic tool measuring arm (tool setter) - Tailstock programmable, hydraulic clamping, mount for rotating center - Auto-power-off after program end - Automatic door with servo drive - Three-jaw power chuck Ø 305 mm (12″) with hydraulic draw-in mechanism - 3x Eppinger driven tool holders (drilling/milling head, VDI40/BMT 65) - LNS hinged belt chip conveyor and LNS Turbo HB coolant filtration system - Dormatec ADF oil mist extraction system (filter level 99.97 %, 65 dB) Bedpfx Acezi Da Rs Tedg - 20 kVA transformer separately wired - Absolute encoder on all axes HALTER LOADASSISTANT UNIVERSAL BIG 70 (Automation) A Halter robot cell with a Fanuc six-axis robot M-710iC/70 is mounted on the machine (see photos: robot arm with Halter lettering directly on the machine). Cell equipment: - Fanuc robot M-710iC/70, payload up to 70 kg - Workpiece placement via rotary table/loading tray - Workpiece-specific grippers for loading the main spindle - Safety enclosure The cell is designed for this machine and is ready for operation, eliminating the need for additional investment in automation. CONDITION Used machine, unused, no operating hours since installation at the original buyer. Sold "as is", warranty excluded (used machine). Inspection recommended before placing an order. OUR SERVICE On-site or online inspection in the Nuremberg area, transport, installation and commissioning as a separate package upon request, direct German-speaking contact person for spare parts and support, financing possible via leasing/hire-purchase partners, member of the FDM, the German trade association for wholesale trade in machinery and tools. Since this is a single unit, subject to prior sale. Call or write to us, and we will arrange an inspection appointment as soon as possible.

Condition: excellent (used), Year of construction: 2022, operating hours: 4,605 h, functionality: fully functional, Controller: FANUC 31i-B5 Max. turning diameter: ø540 mm Max. turning length: 1.020 mm Spindle bore / bar capacity: ø76 / 65 mm Y-axis travel: 170 mm (±85) Milling spindle: 12.000 rpm, 18.5 kW Bjdpfxozilups Ac Tjdg Tool magazine (ATC): 80 stations, Capto C6 Tool change time: 2.0 s Counter spindle: 5.000 rpm, 22 kW Spindle power: 22 / 18.5 kW (S1/S6)

Condition: like new (used), Year of construction: 2020, operating hours: 4,300 h, functionality: fully functional, spindle motor power: 15,000 W, spindle speed (min.): 6,000 rpm, spindle speed (max.): 6,000 rpm, rotational speed (max.): 6,000 rpm, feed length X-axis: 135 mm, feed length Z-axis: 530 mm, bar passage: 51 mm, feed rate X-axis: 30 m/min, feed rate Z-axis: 40 m/min, chuck outer diameter: 152 mm, bar diameter (max.): 51 mm, overall weight: 8,100 kg, Equipment: documentation/manual, We offer this DOOSAN PUMA TT1300SYYB CNC turning and milling center, in like-new condition, manufactured in 2020. Manufacturer: DOOSAN Model: PUMA TT1300SYYB Year of manufacture: 2020 Condition: Like new Category ID: 1128 Type ID: 2239 Machine type: CNC turning and milling center If you have any questions or need more information, please do not hesitate to send us a message or call us. A nearly new DOOSAN PUMA TT1300SYYB from February 2020 is for sale, with the option to purchase an LNS SPRINT 565 S2 automatic bar feeder for an additional €20,000. It has 6 motorized tool holders (3 axial and 3 radial) and only 3,800 cutting hours. This is a high-end, multitasking CNC lathe with a double spindle and double motorized turret with a double, independent Y-axis in both positions. A unique machine in its category, designed for complete machining in a single setup. -Synchronized double spindle -Double turret with motorized tools -Upper and lower Y-axis (SYYB configuration) Bdjdpoyryymefx Ac Teg -Simultaneous machining of both sides -Drastic reduction of cycle times -High precision and thermal stability -Spindle speed up to 6,000 rpm -Bar capacity up to Ø51 mm -2 Hainbuch tool holders Special price: 140,000 EUR, WORKING HOURS: ONLY 3,800 CUTTING HOURS. Available for inspection and operational testing. Simultaneous machining with two turrets. Automatic transfer between main and sub-spindle. Possibility of completing the entire part in a single operation. Ideal for use with a bar feeder. Significant reduction in cycle times compared to a single-spindle lathe.

Condition: used, power: 85 kW (115.57 HP), Year of construction: 2021, operating hours: 1,879 h, Empty weight: 16.500 kg Please contact Emal Jaweed for more information Bedpfx Aoy Ivyvsc Tedg

Condition: excellent (used), Year of construction: 2017, operating hours: 1,500 h, lifting height: 6,050 mm, free lift: 1,930 mm, fuel type: electric, mast type: triplex, power: 22 kW (29.91 HP), fork length: 1,800 mm, Weights Empty weight: 8.700 kg Functional Lifting capacity: 5.000 kg Maximum passing height: 275 cm Number of valves: 3 Supply voltage: 80 V Dimensions of cargo space: 309 x 147 x 275 cm CE mark: yes Maintenance, history and condition Number of owners: 1 Technical condition: very good Bsdjy S Uw Ujpfx Ac Todg Visual appearance: very good Other information Front tyres / undercarriage remaining: 80 Rear tyres remaining : 80 Front tyre size: non-marking Rear tyre size: non-marking Fork carriage: Sideshifter Additional information Please contact Stephan Honinx, Dietmar Pack or Simon Pack for more information = Additional options and accessories = - 3rd valve - 4th valve - Battery charger - Free lift - Super elastic tyres

Condition: excellent (used), With C-axis With driven tools FANUC 21i TB Manual Guide control Turning diameter max 355 mm Turning length -1330 mm Spindle speeds -2'800 rpm Top turret tool holders 12 driven positions Misc. accessories MARCELS MASCHINEN CH Bdedozhmnbopfx Ac Tsg

Condition: used, Year of construction: 2022, turning diameter 420 mm turning length 1350 mm spindle passage 101 mm control Siemens SL 828D ShopTurn number of controlled axis 4 turning speed range 3000 U/min power requirement 22/18,5 kW rapid speed 30 m/min number of tapers in turret head 12/24 BMT 65 number of driven tools in turret 12 BMT 65 Spindel speed of driven tools 5000 U/min Spindelpower on driven tool 7,5/5,5 kW y-axis +/- 65 mm tail stock MT-5 weight 8,0 t dimensions 5,7 x 2,3 x 2,32 m Heavy CNC- lathe with driven tools and Y- Axis in very good condition. First instalation: 03/2023 Appr. 5400 h Power on. - 2x 3-jaw chuck Ø 325 + 400 mm - some fixed tool holders - Tool pre- setter - chip conveyor - 4x driven tool holders - 2 + 2 driven toolholders with Capto C4 - oildust collector Bodpfx Ajzfqf Sec Todg - band filter system with appr. 1000 ltr. - hydr. steady moveable wit turret SMW Autoblock SLU-X3.1 (Ø 20- 165 mm) - 3 colour signal lamp - coolant gun - some jaws - external programming system MCS40501/2 - build in spindle

Condition: like new (used), Year of construction: 2026, operating hours: 42 h, functionality: fully functional, overall weight: 6,500 kg, fuel type: diesel, power: 640 kW (870.16 HP), output current: 1,152 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: AC, nominal power: 640 kW (870.16 HP), nominal power (apparent): 1,500 kVA, continuous power (apparent): 800 kVA, total length: 5,500 mm, total width: 1,800 mm, total height: 2,500 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Perkins, type of cooling: water, fuel: diesel, input voltage: 400 V, input frequency: 50 Hz, rotational speed (min.): 1,500 rpm, type of input current: three-phase, We have the following emergency power generators or grid replacement systems from our series production available for sale, with the following technical specifications: Condition: New, 2026 Engine: Doosan DP180LB Rated power: 700 kVA / 560 kW Speed: 1500 rpm Frequency: 50 Hz Rated voltage: 231/400 V - Includes batteries Bdedpfjwqai Hox Ac Tog - Includes diesel tank (1000 L) - Includes circuit breaker 4P ABB XT7S - Includes control system (island operation) - On request, a control system for grid-parallel operation, load distribution, and peak load management can be provided for an additional charge. Seamless integration into your energy infrastructure. Complete unit installed in a sound-insulated, weatherproof container. Dimensions: 600x245x270 cm (L x W x H) Weight: 10,500 kg Warranty: 24 months or 2000 operating hours. The emergency power generator will be delivered in operational condition, including a documented load test of 60 minutes. Delivery, installation, and commissioning are available for an additional charge. Price: €73,000 net.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: ML0377-000140, turning length: 1,280 mm, turning diameter: 376 mm, spindle bore: 780 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 105 mm, travel distance Z-axis: 1,350 mm, spindle motor power: 22,900 W, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (min.): 200 rpm, turning diameter over bed slide: 780 mm, type of input current: three-phase, We offer this Doosan PUMA 2600LY II CNC turning and milling center in like-new condition, manufactured in 2020. The machine has not been put into operation and has not been turned on since it was new. Power-on time: 0 Model: PUMA 2600LY II Serial number: ML0377-000140 Bdjdpfxey Nmdns Ac Tog Supply voltage: 380 V Number of phases: 3 Frequency: 50/60 Hz Rated power: 49.06 kVA Interrupting capacity: 5 kA Current at full load: 74.65 A Short-circuit capacity: 10 kA Circuit diagram version: P210SYH840A07 Weight: 7400 kg Date of manufacture: 2020-11 - Hydraulic chuck 255 mm (10”) – 3-jaw, with a set of soft jaws and a set of hard jaws - Hydraulic unit - Coolant system with a high-pressure pump (min. 7 bar) - Box guideways for all axes – induction hardened - Slant bed (min. 30°) - Work area lighting - Front door safety switch - Leveling pads - Color monitor - Conversational/Graphic programming support - Turret (min. 12 stations) - Tool holder kit: min. 2 straight driven holders; 2 angular driven holders; 8 static holders for drills and boring bars - Full telescopic covers for guideways - Full machine enclosure - Programmable tailstock (MT5 center) - 3-color status light (stack light) - Automatic tool presetter / tool probe - Tool monitoring system - Electrical filter - Bar feeder interface - Automatic parts catcher and parts box - Thermal compensation function - Direct drive spindle - Spindle speed: min. 4000 RPM - Built-in network card (Ethernet) - USB port - Hinged belt-type chip conveyor - Oil skimmer - Toolbox - Radial driven tool holder x2, Axial driven tool holder x2 If you have any questions or require additional information, please send us a message or contact us by phone.

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 205 mm, travel distance Z-axis: 580 mm, number of axes: 2, Horizontal turning machine manufactured in 2006. This DOOSAN Puma 240 MB features driven tools and is equipped with a Fanuc 0iTC control unit. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma 240 MB machine we have for sale. Contact us for further details. - Manufacturer: Doosan- Model: Puma 240 MB with driven tools- Year of Manufacture: 2006- Condition: Very good / Fully functional- Control Unit: Fanuc 0iTC Bdedozb Etwspfx Ac Tjg Technical Specification Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 205 mm, travel distance Z-axis: 550 mm, number of axes: 4, This 4-axis DOOSAN Lynx 220 LMS was manufactured in 2013. It features a Fanuc 31 i control unit and comes equipped with a short bar loader/bar feeder. If you are looking to get high-quality turning capabilities, consider the DOOSAN Lynx 220 LMS machine we have for sale. Contact us for further details. - Manufacturer: Doosan- Model: Lyax 220 LMS- Year of Construction: 2013- Condition: Very good / Fully functional- Control Unit: Fanuc 31 i- Included Equipment: Short bar loader / Bar feeder (visible connected to the left of the lathe) Technical Specification Bdsdpfjzb Ergsx Ac Tog Counter Spindle Yes Driven Tools Yes

Condition: used, Year of construction: 2005, functionality: fully functional, Very well-maintained machine, regularly serviced and in good condition. Bsdpfszh Rhfsx Ac Tjdg - New B-axis spindel installed in 2025 - Includes a large number of tool holders, both live tooling and static tooling. - Bar feeder included. - Gantry loader included. - 80-position tool magazine with Capto C6 tooling. The machine can be inspected under power and in production until 17 July.

Condition: used, color: orange, Year of construction: 2021, operating hours: 4,023 h, Empty weight: 31.000 kg Dimensions (LxBxH): 1077 x 339 x 300 cm Track width: 60 cm Bdjdpfszf I Haox Ac Tjg Digging depth: 5.395 m = Additional options and accessories = - Rubber tracks

Condition: ready for operation (used), Year of construction: 2016, spindle speed (max.): 2,800 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,350 mm, spindle motor power: 26,000 W, total height: 2,198 mm, total width: 2,030 mm, overall weight: 7,050 kg, controller manufacturer: FANUC, product length (max.): 4,855 mm, number of axes: 3, This 3-axis DOOSAN PUMA GT3100LM was manufactured in 2016. It features a maximum turning diameter of 376 mm and a turning length of 1,245 mm. The machine is equipped with a 12-station turret and live tooling capability, providing versatility for various applications. If you are looking to get high-quality turning capabilities, consider the DOOSAN PUMA GT3100LM horizontal turning machine we have for sale. Contact us for further details. • Electrical: Nominal capacity 33.91 kVA; AC 400 V; 3Ø, PE, 50/60 Hz; Full load current 48.95 A; Interrupt power 5 kA; Short circuit withstand 10 kA; Electrical diagram edition GT3100H31UA00 • Chuck: Samchully MH-212, 3-jaw hydraulic; Chuck size 305 mm • Turning capacity: Max swing over bed 720 mm; Max turning diameter 376 mm; Max turning length 1,245 mm; Max bar capacity 102 mm • Spindle: Nose A2-11; Bore diameter 115 mm; Motor power 26/22 kW (30 min/continuous); Max torque 1,123 Nm; C-axis indexing increment 0.001° • Turret: BMT65P, 12 stations; Live tool max speed 5,000 rpm; Live tool motor power 7.5 kW; 12-station turret with live tooling capability • Axes: Rapids X 24 m/min, Z 30 m/min; Guideways: Solid box guideways on all axes • Tailstock: Programmable movable/digital tailstock with live center; Quill taper MT5 • Counters: Power-on 13,813 h 38 min; Operating 8,538 h 37 min; Cutting 5,547 h 03 min Bdsdpfezbilqox Ac Tsg Additional equipment • External Eppinger Preci-Flex live tool holders and static blocks • Tool-setting probe arm • Original technical documentation Technical Specification Counter Spindle No Driven Tools Yes

Condition: like new (used), Year of construction: 2018, operating hours: 3,621 h, functionality: fully functional, machine/vehicle number: ML272-000046, turning length: 1,074 mm, turning diameter: 550 mm, spindle bore: 102 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 30 rpm, travel distance X-axis: 300 mm, travel distance Z-axis: 1,080 mm, spindle motor power: 35,000 W, type of input current: three-phase, overall weight: 9,450 kg, mount diameter: 32 mm, The machine is in very good condition, maintains new parameters and accuracy. Can be tested. No warranty of any kind. Data subject to error. Bdodjvri I Ajpfx Ac Teg Sale reserved until deposit is received.

Condition: excellent (used), Year of construction: 2022, turning length: 1,650 mm, spindle bore: 181 mm, travel distance X-axis: 470 mm, Tool eye SMW 3 chuck 630-165 mm SMW Steady rest 85 - 350 mm LNS Chip conveyor DORMATEC Air Filter 30 m3 Max. turning Ø: 1030mm X-Axis: 470mm Z-Axis: 1650mm Spindle bore: 181mm Speedrange: 1500Rpm Spindle power: 41kW ATC / revolver: 12 Speed live tools:3000Rpm Power live tools:9kW Bjdpox Eivpsfx Ac Tedg Chip conveyor: yes Tool eye: yes Pinole taper: 6Mk Stroke pinole: 150mm Quill Ø: 160mm Length: 7350mm Width: 3160mm Height: 2800mm Weight: 22000kg

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 1,400 mm, travel distance Y-axis: 1,050 mm, travel distance Z-axis: 1,200 mm, controller manufacturer: FANUC, controller model: 31i CNC, total height: 3,760 mm, total width: 4,325 mm, overall weight: 26,000 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 35,000 W, number of slots in tool magazine: 60, tool weight: 30,000 g, product length (max.): 8,150 mm, number of axes: 4, This 4-axis DOOSAN HM 8000 horizontal machining center was manufactured in 2014. Equipped with Fanuc 31i CNC control, it features a maximum workpiece diameter of 1450 mm and weight capacity of 2000 Kg. It includes a high-pressure through-spindle coolant system, chip conveyor, and both workpiece and tool probes. If you are looking to get high-quality milling capabilities consider the DOOSAN HM 8000 machine we have for sale. Contact us for more information about this machine. • Max. workpiece diameter: 1450 mm • Max. workpiece weight: 2000 kg • Travel (X/Y/Z): 1400 x 1050 x 1200 mm Bdodpfx Aezar Aisc Tjg • Pallet size: 800 x 800 mm • Spindle motor power: 22/35 kW • Max. torque: 1732 N·m • B-axis: indexable by degree • Max. tool diameter: 130/320 mm • Max. tool length: 630 mm Additional equipment • Belt-type oil skimmer • Triple light tower • Pallet centering device • Shower coolant • Through-spindle coolant 70 bar, 7.5 kW, with cyclone filtration • Automatic shutdown • Tool load monitoring • Chip conveyor • Workpiece probe OMP60 • Tool probe TS27R Dimensions Machine Depth 8150 mm Technical Specification Taper Size BT 50

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, turning length: 330 mm, turning diameter: 350 mm, spindle bore: 65 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 45 rpm, travel distance X-axis: 205 mm, travel distance Z-axis: 340 mm, spindle motor power: 15 W, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 36 m/min, total height: 1,700 mm, total length: 3,600 mm, total width: 1,600 mm, Equipment: rotational speed infinitely variable, USED ​​DOOSAN LYNX 2100B 2-axis lathe with Fanuc i-Series CNC Bedpfx Acozhaawe Todg

Condition: excellent (used), machine/vehicle number: JK-00316, Year of construction: 2009, lifting height: 4,700 mm, free lift: 1,620 mm, fuel type: electric, mast type: triplex, battery manufacturer: R&W, battery voltage: 80 V, fork length: 1,200 mm, Lifting capacity: 3.000 kg Maximum passing height: 222 cm CE mark: yes Technical condition: very good Visual appearance: very good Fork carriage: Sideshifter Latest inspection: 2025-11-03 Bdodpfx Acex Itf Ae Teg Please contact Johanny Hendrikse for more information

Condition: ready for operation (used), machine/vehicle number: FBA11-2370-03647, Year of construction: 2019, operating hours: 5,673 h, load capacity: 1,500 kg, lifting height: 4,770 mm, free lift: 1,500 mm, fuel type: electric, mast type: triplex, fork length: 1,150 mm, color: orange, Equipment: CE marking, UVV, Equipped with side shift and fork adjuster. Ready for immediate use. Transportation and trade-in options are available upon request. Bedozb Dduspfx Ac Todg