Used Daewoo for sale (64)

Condition: used, Year of construction: 2001, DAEWOO - DOOSAN PUMA 400 LB CNC LATHE MAKE DAEWOO - DOOSAN, MADE IN KOREA MODEL PUMA 400 LB YEAR 2001 CONTROL FANUC 18 iT CHUCK SIZE 450.0 mm SWING OVER THE BED 700.0 mm SWING OVER SADDLE 480.0 mm MAX TURNING DIA. 380.0 mm BETWEEN CENTRES 2100.0 mm DRAW TUBE DIA. 117.5 mm TRAVELS: X AXIS: 362.0 mm Z AXIS: 2155.0 mm TURRET 10 STATIONS SPINDLE SPEED 20 - 2,000 rpm SPINDLE BORE 132.00 mm SPINDLE NOSE A2 - 11 BEARING DIA. 180.0 mm TURRET TOOL HEIGHT 25.0 mm TURRET BAR DIA. 50.0 mm TURRET INDEXING TIME 0.25 sec FEEDRATE RAPID TRAVERSE X: 16,000 mm/min Z: 18,000 mm/min Iedpjxp Nfxefx Ag Dja FEEDRATE CUTTING FEED X , Z: 0,001 ~ 500.000 TAILSTOCK QUILL DIA. 120.0 mm TAILSTOCK QUILL BORE TAPER MT#6 TAILSTOCK QUILL TRAVEL 120.0 mm PLUS HYDRAULIC STEADY TOOL SETTING ARM SWARF CONVEYOR TURRET TOOLING FULL SET OF MANUALS

Condition: ready for operation (used), controller manufacturer: Fanuc OM, total height: 3,240 mm, total length: 4,100 mm, total width: 6,850 mm, empty load weight: 18,000 kg, additional equipment features: yes, Type: ACE-H80 X-axes: 1250 mm Y-axes: 1000 mm Z-axes: 1000 mm Table dimensions: 800 x 800 mm Max weight on the table: 2000 kg Admission in spindle (ISO): ISO 50 Power on the spindle: 25 kW Number of axes: 4 axes: X,Y,Z,B Toolstore: yes Tools: 90 positions Frequency: 20 -> 4500 rpm Number of pallets: 2x Iodpowttrmsfx Ag Dea Power principal motor: 70 kva Cooling-system: yes

Year of construction: 2005, operating hours: 6,235 h, condition: ready for operation (used), General Data Measurements width 2200 mm Measurements depth 4100 mm Machine weight 11600 kg Control Unit Brand FANUC Model 18i-TB Main Drive Spindle speed range 5000 Spindle motor power 22 kW Number of axis 3 Movement X-Axis Movement 255 mm X-Axis Rapid Traverse 20000 mm/min Y-Axis Movement 120 mm Y-Axis Rapid Traverse 7500 mm/min Z-Axis Movement 800 mm Ijdpfjxxnf Aox Ag Dea Z-Axis Rapid Traverse 24000 mm/min C-Axis Movement 360° Workpiece Workpiece weight 120 kg Turret Number of turrets 2 Tools Number of station 12 Media Chip conveyor Yes Additional Equipment Measuring Probe: Tool Measuring Probe Automatic Bar Loader: ILS-RBK10016 L 2265 mm, W 1116 mm, Approx. 490 kg Bar Loader Max. Material Length/Diameter: 1600 mm/5-65 mm Magazine Short Bar Feed with Servo Drive Main and Counter Spindle with Power Chuck D = 250 Enclosed Work Area Enclosure According to Accident Prevention Regulations Memory Card Input Socket, RS 232 Socket Tool Load Monitoring, Bed Flushing Workpiece Air Blow-off Function Automatic Tool Measuring Probe // Driven Tools on Both Revolvers This 3-axis DAEWOO PUMA TT 2000 SY was manufactured in 2005. It features a turning diameter over bed of 800 mm and a maximum bar diameter of 65 mm. Equipped with a Fanuc 18i-TB control system, it offers spindle speeds up to 5000 rpm and includes a tool turret with 12 stations. Consider the opportunity to buy this DAEWOO PUMA TT 2000 SY horizontal turning machine. Contact us for more information about this machine. Application Types Turning

Condition: refurbished (used), battery capacity: 375 Ah, battery voltage: 48 V, total height: 627 mm, total length: 1,030 mm, total width: 349 mm, Tested forklift battery for your truck - 48V 3PZS 375AH - DIN B + 1-year warranty + includes automatic filling system (Aquamatik) + includes end cable & REMA 320 connector (other connectors can be installed on request) + Capacity: minimum 90–100% (C5 capacity protocol provided upon delivery) + Year of delivery: 2024 Dimensions: Length: 1,030 mm Width: 349 mm Height: 627 mm Weight: approx. 580 kg Compatible with the following models and others: Daewoo BR14 Daewoo BR14 JW Daewoo BR16 Daewoo BR16 JW Fpsbqvmgyjwqdq Isyoi Ijdpfjwzuzxjx Ag Dsa Mitsubishi FB15TCA Common battery sizes available on request. Transport available.

Condition: good (used), Year of construction: 2007, Used CNC lathe from Doosan Type: Lynx 220 Turning diameter: 250 mm Iedpfxoxpxb Aj Ag Dea Turning length: 550 mm Spindle bore: 51 mm X and Y axes 12-position tool turret Fanuc CNC control LNS bar feeder

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 625 mm, controller manufacturer: Fanuc, controller model: 21-M, table width: 1,200 mm, table length: 500 mm, overall weight: 7,800 kg, spindle speed (max.): 8,000 rpm, 3-axis machining center Manufacturer: Daewoo Doosan Model: Mynx 500 Year of manufacture: 2001 Control: Fanuc 21-M S/N: XXXXX Spindle hours: n/a Technical data: ----- - Table size: 1,200 x 500 mm - Travels X-Y-Z: 1,020 x 510 x 625 mm - Spindle: 8,000 rpm with spindle oil cooler - Tool holder: SK40 - Tool magazine with 24 stations - Coolant through spindle: yes - Chip conveyor - Central lubrication - Footprint (LxWxH): 3.20 x 2.35 x 2.70 m - Weight: approx. 7.8 t Ijdexvd T Depfx Ag Dea Accessories: ----- - Documentation - Handwheel - Coolant gun

Condition: used, Year of construction: 1999, turning length 600 mm Isdpfx Agjxuv Sis Doa control Fanuc OT

Condition: new, New electric scrubber dryer, floor cleaning machine DAEWOO type DAFL50A Year of manufacture 2024 Theoretical area performance 2000 mª/ h Working width 510 mm Cleaning brush Ø 510 mm Brush speed 175 rpm. Suction lip width 850 mm Tank volume clean water: 50 liters Tank volume dirty water: 50 liters Noise level 66 dBa Climbing performance 2% Battery voltage 24 volts, 100 AH Ijdpfoxr N U Ejx Ag Dea - Battery charger 24 volts - Battery 24 volts, 100 AH - One cleaning brush - Two separate tanks - Without drive, the device is pushed by hand or the machine is pulled by the brush drive Machine length: 1200 mm Machine width: 510 mm Suction lip width: 850 mm Machine height: 1350 mm Empty weight 160 kg Very good condition, as good as new - unused - Original packaging

Condition: ready for operation (used), Freelift = kan in een zeecontainer rijden Dieselmotor Sideshift Triplex mast Kind off: Forklift Number of axles: 2 Iedpfx Aoxgv Nlsg Dja Loading capacity: 2500 kg Max arrow height: 4290 mm

Condition: refurbished (used), battery capacity: 500 Ah, battery voltage: 80 V, total height: 742 mm, total length: 1,027 mm, total width: 852 mm, Tested forklift battery for your forklift - 80V 4PZS 500Ah - special tray + 1 year warranty + incl. aquamatic system Iedpfxswzvzgo Ag Dea + incl. end conductor & REMA 320 connector (other connectors can be installed upon request) + Capacity: min. 90–100% (C5 capacity protocol included upon delivery) + Year of delivery: 2024 Dimensions: Length: 1,027 mm Width: 852 mm Height: 742 mm Weight: approx. 1,580 kg Suitable for the following models and others: Daewoo B30 X-5 Common battery sizes available, inquiries welcome. Transport available.

Condition: ready for operation (used), Year of construction: 2000, operating hours: 7,487 h, functionality: fully functional, machine/vehicle number: 23MS0122, turning length: 492 mm, turning diameter: 290 mm, travel distance X-axis: 205 mm, travel distance Z-axis: 580 mm, swing diameter over bed slide: 550 mm, controller model: Fanuc Series 18-T, TECHNICAL DETAILS Capacity Swing diameter over bed: 550 mm Swing diameter over cross slide: 390 mm Maximum turning diameter: 290 mm Maximum turning length: 492 mm Travel X-axis travel: 205 mm Z-axis travel: 580 mm C-axis: 360° (0.001° increment) Spindle Maximum main spindle speed: 4,500 rpm Maximum sub-spindle speed: 6,000 rpm Chuck diameter: main spindle 210 mm / sub-spindle 135 mm Spindle bore: main spindle 76 mm / sub-spindle 45 mm Driven Tools Speed range: 6,000 rpm Feed Rates Rapid traverse X-axis: 20,000 mm/min Rapid traverse Z-axis: 25,000 mm/min Turret Number of tool stations: 12 Ijdpfjxrz Ukox Ag Doa MACHINE DETAILS Control: Fanuc Series 18-T Dimensions & Weight Dimensions (L x W x H): 3,320 x 1,700 x 1,740 mm Weight: 4,240 kg Operating Hours Cutting hours: 7,487 h Power-on hours: 62,730 h EQUIPMENT Chip conveyor Sub-spindle Driven tools Tool presetter Workpiece catcher Box with collets 5x additional driven tools Bar feeder

Condition: used, Year of construction: 2000, DAEWOO PUMA 350 A CNC Lathe CNC FANUC 18 – T AUTOBLOCK Steady Rest Presetting Max. swing diameter over bed: 700 mm Max. swing diameter over carriage: 480 mm Max. turning diameter: 400 mm Max. turning length: 1,050 mm Max. bar capacity: 90 mm Chuck diameter: 305 mm Spindle nose: ASA – 8 Spindle speed: 30 – 3,000 rpm Travel: X: 362 mm Z: 1,105 mm Tool turret: 12 positions Spindle power: 22/26 kW Isdpfexztzbsx Ag Dea Weight: 9,000 kg Year of first installation: 2000 Complete with all documentation

Condition: used, Year of construction: 2007, operating hours: 8,199 h, Year of manufacture: 2007 Empty weight: 8.080 kg Dimensions (LxBxH): 593 x 221 x 322 cm Digging depth: 4.42 m Ijdpfexqfb Sjx Ag Doa

Condition: ready for operation (used), Year of construction: 2000, operating hours: 2,900 h, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Perfectly functioning machine with sub-spindle, chip conveyor, tool presetting, and set of tool holders and manuals Iedpfexrgglex Ag Dsa

Condition: used, Torni CNC Doosan Puma TW2600 2016 (low hours) complete with robot Iodpfow Slx Uex Ag Dja it can be inspected in our warehouse in Gussago BS

Condition: refurbished (used), battery capacity: 375 Ah, battery voltage: 48 V, total height: 627 mm, total length: 1,030 mm, total width: 349 mm, Tested forklift battery for your truck - 48V 3PZS 375AH - DIN B + 1-year warranty + includes automatic filling system (Aquamatik) + includes end cable & REMA 320 connector (other connectors can be installed on request) + Capacity: minimum 90–100% (C5 capacity protocol provided upon delivery) + Year of delivery: 2024 Dimensions: Length: 1,030 mm Width: 349 mm Height: 627 mm Weight: approx. 580 kg Compatible with the following models and others: Daewoo BR14 Daewoo BR14 JW Daewoo BR16 Isdewzuzrspfx Ag Dja Daewoo BR16 JW Fpsbqvmgyjwqdq Isyoi Mitsubishi FB15TCA Common battery sizes available on request. Transport available.

Condition: used, Year of construction: 1996, Technical details: pressure: 300 t chamfer lenght: 6000 mm control: Delem DA 24e distance between columns: 2x5100 mm Iodpju Ib Drofx Ag Dja throat: 645 mm dayligth: 520 mm plate thickness: 5 mm total power requirement: ca. 10,0 je machine kW weight of the machine ca.: ges. ca. 66 t dimensions of machine: L:12,0xB:2,3xH:3,65 m Hydr. Pressbrake 6000-300 - jib arm length= 720mm - incl. back gauge (without crowning system) adjustment travel horizontal/vertical: 680/200mm motoric Optionally, two of these press brakes can be offered - also applicable as a Tandem Pressbrake with 2x 6 meter with 300t, with table size: W:165xL.12000mm, - program sequence via both presse(synchronized) and single available Optional are tools available! Copy of documentation available i.D. *

Condition: used, Year of construction: 2008, DAEWOO DOOSAN PUMA 400 M LATHE YEAR OF INITIAL INSTALLATION 2008 AUTOBLOK SELF-CENTERING STEADY REST CNC Model: Fanuc CNC Version: 21i-TB Main spindle power: 30 / 37 kW Ijdoxxur Ajpfx Ag Dsa Main spindle chuck diameter: 315 mm Main spindle bar capacity: 95 mm Swing over bed: 770 mm Swing over carriage: 590 mm Turning diameter over bed: 560 mm Turning length: 1105 mm Main spindle speed: 20 – 2,500 RPM Number of tool turrets: 1 Number of tool stations on first turret: 12 Number of driven tool positions on first turret: 12 X-axis travel (first turret): 362 mm Z-axis travel (first turret): 1105 mm Tailstock: Yes Chip conveyor: Belt type Tool presetter: Yes Number of driven toolholders supplied: 5 (3 axial + 2 radial) Machine in excellent condition.

Condition: used, New diesel generator set, power generator, emergency generator RTE Model: 50 kVA – identical to DAEWOO DAGFS 50 Brand new, unused, year of manufacture 2025 Rated output: 50 kVA Continuous output: max. 40 kVA Standby output: 55 kVA / 44 kW Rated current: 33 A Voltage: 400/230 V, 50 Hz 230 V, 50 Hz Fuel consumption: 99-liter tank for up to 8.5 hours of operation at 75% load Fuel consumption at 75% load: approx. 11 liters/hour Fuel consumption in standby mode: approx. 4 liters/hour Drive engine: 4-cylinder Ricardo ZH4105ZD inline diesel engine Engine power at 1500 rpm: 45 kW Engine power at 1800 rpm: 55 kW Displacement: 1500 cc Tank capacity: 99 liters - Simple and compact design with soundproof metal enclosure - Forklift pockets for easy and safe transportation Iodjxlkq Uopfx Ag Doa - 3x CEE 16A sockets (3-pin, 230V) - 1x CEE 16A socket (5-pin, 400V) - Terminal connections for cable power supply for external consumers, e.g., site distribution boards - ATS module for mains backup operation, enables automatic emergency power switching in case of power failure Required space (L x W x H): 2150 x 950 x 1200 mm Weight: 900 kg New machine from stock

Condition: refurbished (used), Year of construction: 2006, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 36,000 m/min, rapid traverse Y-axis: 36,000 m/min, rapid traverse Z-axis: 32,000 m/min, controller manufacturer: FANUC, controller model: Series 0i-MC, spindle speed (max.): 12,000 rpm, spindle motor power: 18 W, BRAND: DOOSAN-DAEWOO MODEL: MYNX NM-510 CATEGORY: VERTICAL MACHINING CENTERS YEAR OF MANUFACTURE: 2006 CNC CONTROL: FANUC Series 0i-MC MACHINE WEIGHT: 7,500 kg MACHINE DIMENSIONS: - Length: 4,165 mm - Width: 2,600 mm - Height: 3,043 mm Spindle Spindle taper: ISO 40 Spindle speed: 12,000 rpm Spindle motor power (cont./30 min): 15 / 18.5 kW Working Capacity X axis: 1,020 mm Y axis: 510 mm Z axis: 625 mm Distance spindle nose – table surface: 150 – 775 mm Distance spindle center – column: 557 mm Table Table dimensions: 1,200 x 500 mm Table load capacity: 800 kg Iodpfx Agexxlmws Dsa Feed Rates Rapid traverse (X/Y/Z axes): 36,000 / 36,000 / 32,000 mm/min Cutting feed rate (X/Y/Z axes, linear interpolation, max): 8,000 mm/min Tool Changer Tool holder taper: DIN 69871-A40 Shank: DIN 69872-A40 Tool magazine capacity: 30 stations Maximum tool diameter (adjacent tools full/empty): Ø 90 / Ø 150 mm Maximum tool length: 300 mm Maximum tool weight: 8 kg Accessories Coolant tray + high pressure pump (15 bar) with through-spindle coolant Chip conveyor Spindle line air conditioner + transformer Manuals, electrical diagrams, and CE Declaration

Condition: good (used), Year of construction: 2000, Daewoo Puma 230, Iodowx I Efjpfx Ag Doa year of manufacture 2000, Fanuc 18 iT control, turning length 548 mm, turning diameter 350 mm, 10-position turret, tailed tailstock, three-jaw chuck Ø 254 mm, tool measuring arm, swarf conveyor, coolant system, main spindle newly mounted, flat guides, accessories,

Condition: refurbished (used), battery capacity: 375 Ah, battery voltage: 48 V, total height: 640 mm, total length: 920 mm, total width: 442 mm, Tested forklift battery for your truck – 48V 3PZS 375AH – special tray + 1 year warranty + including aquamatic system + including end conductor & REMA 320 connector (other connectors can be fitted on request) + Capacity: min. 90–100% (C5 capacity protocol will be provided upon delivery) + Year of delivery: 2024 Dimensions: Length 920 mm Width 442 mm Height 640 mm Weight: approx. 610 kg Suitable for the following models and more: Iedpowzvtpjfx Ag Dea Toyota/BT CBT4 Daewoo BR13 Doosan BR15J-5 Nichiyu FBR20 Common battery sizes available, feel free to inquire. Transport possible.

Condition: used, Technical details: rated capacity: 8,1 kVA Number of working hours: 0 h output: max. 400 V = 8,1 kVA type of fuel: Diesel voltage: 400 V / 23 V V output: max. 8,1 kVA Ijdju Nvcxepfx Ag Dsa weight of the machine ca.: 0,165 t dimensions L x W x H: ca. 0,85 x 0,53 x 0,77 (o.Karton) m transport dimensions LxWxH: 0,9 x 0,55 x 0,80 m Floor standing machine with 4x wheels, 2x steerable and braked power: at max. voltage = 400V - 8,1kVA and 230V - 7,3 kVA at nominal voltage = 440V - 7,5 kVA and 230V - 6,7 kVA current 400V - 16A and 230V - 32A Voltage 400V / 230V Diesel engine: 498 cc displacement Tank capacity 15 liters Battery 12V voltage with power 36 Ah Equipment: 3x connection socket ( 1x 400V / 16A and 1x 230V / 32A both three-pole and 1x Schuko socket 230V / 16A) Accessories see photo Offers only to the professional user. *

Condition: used, Year of construction: 1995, LATHE DAEWOO PUMA 12 L Isdsxwvxnopfx Ag Doa CNC FANUC: O – T MAX. SWING DIAMETER: 570 mm MAX. TURNING LENGTH: 1,020 mm MAX. TURNING DIAMETER: 480 mm BAR CAPACITY: 90 mm SPINDLE SPEED: 12 – 2,500 RPM ASA – 8 POWER CHUCK: 315 mm TRAVELS: X: 260 mm Z: 1,050 mm TOOL TURRET: 12 POSITIONS WEIGHT: 6,000 kg CHIP CONVEYOR

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 1,300 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 24,000 m/min, rapid traverse Y-axis: 24,000 m/min, rapid traverse Z-axis: 20,000 m/min, controller manufacturer: FANUC, controller model: Series 21i-MB, table load: 1,000 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 15 W, BRAND: DAEWOO MODEL: MYNX 650 CATEGORY: VERTICAL MACHINING CENTRES YEAR OF MANUFACTURE: 08/2004 CNC CONTROL: FANUC SERIES 21i-MB MACHINE WEIGHT: 6,500 kg MACHINE DIMENSIONS: Length: 4,110 mm / Width: 3,190 mm / Height: 3,100 mm Spindle: Spindle taper: ISO 40 Spindle speed: 8,000 rpm Spindle motor power (cont./30 min): 11/15 kW Working Capacity: X-axis: 1,300 mm Y-axis: 650 mm Z-axis: 625 mm Distance spindle centre–table top: 75 / 775 mm Distance spindle nose–table centre: 150 / 775 mm Table: Table size: 1,400 x 650 mm Table load capacity: 1,000 kg Feed Rates: Rapid traverse X / Y axes: 24,000 mm/min Rapid traverse Z axis: 20,000 mm/min Cutting feedrate X/Y/Z axes (linear interpolation): max. 8,000 mm/min Tool Changer: Tool taper: DIN 69871-A40 Shank: DIN 69872-A40 Tool magazine capacity: 30 stations Max. adjacent tool diameter: Ø 90 mm Max. alternate tool diameter: Ø 150 mm Maximum tool length: 300 mm Maximum tool weight: 8 kg Other: Manuals, electrical diagrams, and CE Declaration Chip conveyor, coolant tank (300 L) Automatic high-pressure cooling system through the spindle line at 20 bar Transformer MACHINE OVERHAULS PERFORMED: - New Y-axis ball screw, including bearing replacement - X-axis ball screw overhauled, including bearing replacement - Complete overhaul of anti-friction material (Turcite B) on X and Y axes - Complete spindle line overhaul with belt, seal, and bearing replacement - Complete replacement of X and Y axis lubrication system - Complete internal repainting and Lexan replacement Iedpexxlifjfx Ag Dsa - Full overhaul of telescopic covers on X/Y/Z axes