Used Doosan for sale (314)

Condition: used, Year of construction: 2007, turning length: 510 mm, turning diameter: 250 mm, overall weight: 4,000 kg, controller manufacturer: Fanuc, controller model: I Series, Turning diameter over bed: 250 mm Max. machining diameter: 250 mm Max. turning length: 510 mm Spindle bore: 53 mm X-axis travel: 175 mm (160 plus 15 mm) Z-axis: 550 mm Ndodpfox Nqwlsx Aa Ejf Spindle speeds up to 6,000 rpm Tailstock 12-position turret All 12 stations equipped with driven tools

Condition: used, Year of construction: 2019, control Fanuc i-Serie turning diameter 370 mm turning length 712 mm greates pass round over bed 651 mm swing diameter over slide rest 461 mm x-axis 255 mm z-axis 790 mm turning speeds 5.000 U/min Number of tools 12 St. spindle hours ca. 8.953 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Chip conveyor - Driven tools Accessories, tools shown, and clamping devices are only included in the scope of delivery if this is noted in the additional information. Ndedpfex Ik Ubox Aa Eef Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: used, Year of construction: 2018, operating hours: 5,156 h, 2018 | Doosan DX235LCR-5 | Used Tracked Excavator | 5156 hours 📍Location: Germany, Wilsdruff 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! Ndsdpsx I S Iisfx Aa Eof 💰 Buy Now for EUR 115500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 64 inspection points 58 approved ✅ 3 imperfect ℹ️ 3 issues ⚠️ 📌 Inspector's Comment: Crawler excavator Doosan DX235LCR-5 from 2018. short tail version. the boom measures 5.80m (basic boom 3.10m, adjustable part 2.90m) and the stick 2.40m. floor plate width 600mm. the condition of the machine corresponds to the value of the operating hours. the machine shows wear on pins and bushings corresponding to the age and mileage as well as the purpose of use, as well as signs of use (dents, abrasions, etc.). at the time of the inspection, the machine ran/functioned without any abnormalities. maintained machine. the sprocket/turas should be replaced. the customer has decided to keep the backhoe bucket after the inspection. the illustrated backhoe bucket is therefore NOT included in the sale! 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "33296 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Year of construction: 2015, operating hours: 7,200 h, condition: ready for operation (used), Control Unit Ndedjx D Dtajpfx Aa Eof Brand FANUC Main Drive Spindle speed range 2000 Number of axis 2 Movement X-Axis Movement 352 mm Z-Axis Movement 1105 mm This DOOSAN PUMA 4100B was manufactured in 2015. A robust horizontal turning machine featuring a Fanuc 32i CNC system, it offers a maximum turning diameter of 550 mm and a length of 1,042 mm. Equipped with a 10-station turret and a chip conveyor, it's ideal for efficient machining with 7,200 hours of operation. If you are looking to get high-quality turning capabilities, consider the DOOSAN PUMA 4100B machine we have for sale. Contact us for more information. Application Types Turning

Condition: used, fuel type: diesel, Year of construction: 2020, operating hours: 3,658 h, Drive: Track Empty weight: 25.000 kg Track width: 80 cm Number of owners: 1 Please contact Kristoff Van Havere for more information - Original Doosan Longreach 15 meter - Hydraulic quick hitch CW30 - Bucket 1800mm Ndsdpfox E Ni Eox Aa Ejf - Piping for tilt bucket (low flow) - Grease system Groeneveld - Cab overpressure filter unit

Condition: good (used), functionality: fully functional, Year of construction: 2014, SYNCROMILL C21-63 OPERATING RANGES Table 1600 mm X 800 mm Travel (X/Y/Z): 700 / 1,000 / 800 mm FEED AXES Speed (X/Y/Z): 75 / 75 / 105 m/min Acceleration (X/Y/Z): 11 / 11 / 17 m/s² MACHINING SPINDLES No. of spindles: 2 Spindle spacing: 700 mm Power S1/100%: 26 kW Torque S1/100%: 60 Nm Power S6/40%: 35 kW Torque S6/40%: 80 Nm Max. speed: 17,500 Rpm TOOL INTERFACE HSK 63 TOOL MAGAZINE Chip-to-chip time (VDI 2852): 2.9 s Tool positions: 56 Tools atc Tool length: 530 mm Weight: 9 kg Diameter with fully occupied magazine: 85 mm Diameter with empty positions: 175 mm CONTROLLER / INSTALLATION Siemens 840D SL A-axis: ±180° B-axis: 360° Cooling Blum Touch Probe Rotary table 350 MM Xtra Spindle for heavy works Input power: 95 kVA Installation dimensions (L/W/H): 4.6 / 3.4 / 3.2 m Nodpfx Aaovxpuio Esdf Weight: 25,000 kg Additional Equipment Included: 1 x Rotary Table for advanced multi-axis machining 1 x Touch Probe for precise measurement and quality control 1 x Extra Spindle (ready-to-install for maximum uptime) Ready For Delivery. Increased productivity with two spindles operating simultaneously High flexibility for complex parts and multi-side machining Equipped with additional accessories to maximize machine versatility and reduce downtime

Condition: used, Year of construction: 2017, operating hours: 24,500 h, Serial number: DIN0DA30LH074xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21134 Specifications: 2017 model Approx. 6870 hours Approx. 24,500 km Power: 270 kW (375 hp) Tires (see photos) Road registered (white plates) High tailgate Ndodpsw Ruyxjfx Aa Eof Central lubrication Length: 955 cm Width: 299 cm Wheelbase: 411 / 177 cm Curb weight: 24,300 kg Max payload: 27,125 kg 6x6 Reversing camera LED work lights Radio/CD Air conditioning Description: 2017 Doosan DA30 articulated dump truck for sale.Equipped with central lubrication, high tailgate, and reversing camera.Ready for quick delivery. Hours: 24500 Own weight: 24300 Model: 2017 Doosan DA30 Dumper

Condition: used, Year of construction: 2016, control Fanuc i-Serie turning diameter 370 mm turning length 712 mm greates pass round over bed 651 mm swing diameter over slide rest 461 mm Nedpfxex Ik T Rs Aa Esdf x-axis 255 mm z-axis 790 mm turning speeds 5.000 U/min Number of tools 12 St. auto power on hours ca. 13.086 spindle hours ca. 4.221 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools shown, and clamping devices are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: used, Year of construction: 2014, CNC turning and milling center (9 axes) with Y-axis, B-axis, sub-spindle, and tool turret CNC control FANUC 31iTA with Manual Guide i Swing diameter over bed: 750 mm Ndsdpfx Aex Hy R Nsa Eef Swing diameter over cross slide: 600 mm Collision-free turning diameter: 210 mm Max. turning diameter main spindle: 540 mm Max. turning length: 1,520 mm Main spindle left and right (sub-spindle) Chuck diameter: 210 mm Spindle bore: 76 mm Bar capacity: 66 mm Speed range up to: 5,000 rpm Max. torque: 318 Nm Turning/milling spindle (swivel head, B-axis) Speed range up to: 12,000 rpm Torque: 81 Nm Drive power: 18.5 kW Positioning: 0.001° Swivel range: 240° (+120°) Tool magazine ATC Number of magazine stations: 40 Tool holder: CAPTO C6 Lower turret Tool stations: 12 Drill holder diameter: 40 mm Tool shank cross-section: 25x25 mm Tool holder type: BMT 55P Motor drive power: 5.5 kW Tool speed: 5,000 rpm - Chip conveyor - Parts removal with conveyor belt - Tool measurement arm - Internal coolant supply through sub-spindle - Chuck cleaning - Air/water through turret - Knoll compact filter unit - Automatic workpiece measurement

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 146 h, load capacity: 2,000 kg, lifting height: 4,500 mm, free lift: 1,210 mm, fuel type: electric, mast type: triplex, construction height: 2,160 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 500 Fork width: 100 mm Fork thickness: 40 mm ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Gearbox: Electromechanical Nsdpfx Aaotl Hzds Eodf Condition: As good as new Technical condition: New Front tires Type: Superelastic Front tires size: 6.50-10 Rear tires Type: Superelastic Rear tires Size: 5.00-8 Battery Volt: 48V Battery Ah: 500Ah Battery manufacturer: GNB Battery year of construction: 2023 Sideshift, 3rd valve, 4th valve, Rear working lights, Front working lights, Roof cover, Windshield, Load protection grille, Full free lift, Safety Light, , Multi-lever, Single pedal

Condition: excellent (used), functionality: fully functional, fuel: diesel, Year of construction: 2016, operating hours: 1,236 h, compressor 7/31e year of manufacture 2016 operating hours 1236 Njdpsx Dcl Usfx Aa Esdf weight 750 kg 3100 l/min mounted on trailer

Year of construction: 2020, condition: ready for operation (used), General Data Measurements width 1785 mm Measurements depth 3035 mm Measurements height 1715 mm Machine weight 4050 kg Nsdpfx Asx D Hmvja Eedf Control Unit Brand FANUC Main Drive Spindle speed range 3500 rpm Spindle motor power 15/11 kW Spindle bore 86 mm Movement X-Axis Movement 255 mm X-Axis Rapid Traverse 24 m/min Z-Axis Movement 790 mm Z-Axis Rapid Traverse 30 m/min Workpiece Workpiece drm over bed 651 mm Additional Equipment Coolant tank capacity: 160 liters Tail Stock Tailstock travel: 775 mm Tailstock quill diameter: 80 mm Tailstock quill travel: 120 mm Morse taper: MT4 This DOOSAN LYNX 300M was manufactured in 2020. It features a maximum swing over bed of 651 mm, turning diameter of 461 mm, and a turning length of 712 mm. The main spindle supports speeds up to 3,500 rpm with a spindle bore of 86 mm. It includes a 12-position turret and rapid traverse rates of 24/30 m/min in X- & Z-axes and Milling function with the C axis. Consider the opportunity to buy this DOOSAN LYNX 300M horizontal turning machine. Contact us for more information. Located in Denmark. Application Types Turning

Condition: used, Year of construction: 2018, operating hours: 7,450 h, Serial number: DHKCEWBSVH500xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20213 Specifications: Ndodpfxswdvg Ie Aa Eef - 2018 model - 8000 Hours (will increase slightly) - 17,700 kg - 102.1 kW - Articulated boom - Blade - Central lubrication - G60 HK-mount - Stage 5 engine - 4 new rear tires - K80 trailer with electric hydraulics - Engcon ec219 rototilt - 650 l Gjerstad sanding bucket (new knife) - Tool cabinet - Wheel guards - Support legs - Blade - Lights - Air conditioning/ac - Radio - Ready to deliver Description: We have a 2018 Doosan DX165W-5 wheeled machine w/ K80 trailer hitch with electric and hydraulics, articulated boom, Engcon ec219 rototilt, Gjerstad sanding bucket for sale.u The machine is well maintained and cared for by the owner. It will be serviced again before sale. Ready for delivery Hours: 7450 Own weight: 17700 Total Weight: 17700 Kw: 102,1 Model: DX165W-5 hjulmaskin m/ K80 hengerfeste med elektrisk og hydraulisk opplegg, knekkbom ,Engcon ec219 rototilt, Gjerstad pusseskuffe. SE VIDEO

Condition: used, Year of construction: 2007, control Fanuc 21i-TB turning speeds 4.500 U/min x-axis 205 mm z-axis 580 mm greates pass round over bed 550 mm swing diameter over support 300 mm number of tool places 12 Pos. bar passage 65 mm auto power on hours ca. 56.433 h spindle hours ca. 23.981 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Chip conveyor - Driven tools Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Njdpfxsx Ik T De Aa Ejdf Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: used, Year of construction: 2021, operating hours: 831 h, Equipment: ABS, Doosan DX 55-9C * Dead weight 5.5 t. * Transport length 5.85 m. * Transport width 1.88 m. * Transport height 2.56 m. * Bucket capacity min. 0.18 m³ * Track width 400 mm. * Driver protection Kb. * Reach 6.15 m. Njdpfx Aajullmdj Esdf * 2 x proportional control * Powertilt with Lehnhoff system * Air conditioning * ZLG 5500 KG * Engine 41 KW 56 HP * Blade support

Condition: excellent (used), power: 44 kW (59.82 HP), fuel type: diesel, color: other, Year of construction: 2014, operating hours: 7,215 h, Equipment: air conditioning, Year of manufacture: 2014 Drive: Track Number of cylinders: 4 Empty weight: 8.600 kg Dimensions (LxBxH): 620 x 230 x 264 cm Ndjdpfx Aajw U Ndyj Eof Engine type: Yanmar 4TNV98C CE mark: yes Technical condition: very good Visual appearance: very good General Country of production: Korea Condition CE type: CE CW10 Hydraulic quick coupler, Hydraulic tilting bucket, Overpressure system

Condition: used, fuel type: diesel, fuel: diesel, Year of construction: 2022, operating hours: 509 h, Doosan 77.55 Compressor – 3000 rpm – 8.6 bar – 35.5 kW – Weight 750 kg – 509 operating hours = Additional Information = Year of manufacture: 2022 Intended use: Construction Contact Miguel Cubas for further information. = Company Details = We are located between Antwerp and Brussels along the A12 motorway, close to the port of Antwerp. Opening hours: Monday to Friday, continuously from 8:30 am to 7:00 pm. Nedsx Dy E Espfx Aa Esdf

Condition: used, Year of construction: 2017, operating hours: 6,150 h, Year of manufacture: 2017 Empty weight: 23.500 kg Dimensions (LxBxH): 898 x 299 x 308 cm Track width: 60 cm Digging depth: 10.795 m Nodpfx Aottzmnoa Eedf

Condition: used, Year of construction: 2015, operating hours: 7,473 h, Serial number: dhkceaaucf6001xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21920 Specifications: 2015 model 7473 hours 36.2 kW Weight: 6250 kg Machine width: 197 cm Movable boom Chassis (see pictures) Cut Rubber belts Yanmar engine Central lubrication Tiltrotator Sanding bucket Excavator bucket Auxiliary hydraulics Air conditioning/ac Light Radio Ready for delivery Description: We have a 2015 Doosan DX62R-3 excavator with rototilt, sanding bucket and backhoe bucket for sale. The machine works as it should according to the owner and it comes with 2 drawers and a rototilt. Nedpex Aavzofx Aa Esdf The machine is in weekly operation so the number of hours will increase slightly. Ready for delivery Hours: 7473 Own weight: 6250 Kw: 36.2 Model: DX62R-3 gravemaskin m/ rototilt, pusseskuffe og graveskuffe

Condition: used, Year of construction: 2011, x-travel 600 mm y-travel 560 mm z-travel 565 mm Control Fanuc Series 32-i MODEL A spindle tunring speed 8.000 U/min tool taper BT 40 spindle hours ca. 11.298 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical Features & Accessories: - Interchangeable plates/table Accessories, tools, and clamping devices shown are only included if noted in the additional information. Subject to changes and errors in technical data and specifications, as well as prior sale! Nodpjx Ik S Hofx Aa Eedf

Condition: new, Year of construction: 2023, operating hours: 2 h, lifting height: 4,730 mm, fuel type: electric, total height: 2,200 mm, total length: 2,600 mm, total width: 1,220 mm, color: other, Year of manufacture: 2023 Engine capacity: 27 cc Ndedpfxjw U Ny Io Aa Esf Empty weight: 5.010 kg Lifting capacity: 3.000 kg CE mark: yes General condition: very good Technical condition: very good Visual appearance: very good General Country of production: Korea Condition CE type: CE Side-shift, 4th hydraulic function, New battery from 2025 !!

Condition: used, fuel type: diesel, fuel: diesel, Year of construction: 2022, operating hours: 687 h, Doosan 77.55 compressor – 3000 rpm – 8.6 bar – 35.5 kW – weight 750 kg – 687 operating hours – with new hoses and hammers = More information = Nsdpfsx Dy D Uex Aa Eedf Year of manufacture: 2022 Intended use: Construction Contact Miguel Cubas for more information. = Company information = We are located between Antwerp and Brussels along the A12 motorway, near the port of Antwerp. Opening hours: Monday to Friday, continuously from 8:30 am to 7:00 pm.

Condition: used, power: 41 kW (55.74 HP), color: orange, Year of construction: 2010, operating hours: 4,800 h, Year of manufacture: 2010 Njdpfx Aow Afrdoa Eodf Drive: Wheel Empty weight: 5.550 kg Dimensions (LxBxH): 612 x 229 x 286 cm

Condition: used, Year of construction: 2014, control Fanuc i-Serie turning diameter 320 mm turning length 305 mm greates pass round over bed 510 mm swing diameter over slide rest 290 mm x-axis 175 mm z-axis 330 mm turning speeds 6.000 U/min spindle bore 53,3 mm Number of tools 12 St. auto power on hours ca. 39.183 h spindle hours ca. 8.379 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Ndodpex Ik Syefx Aa Eof Technical features & accessories: - Chip conveyor - Driven tools Accessories, tools shown, and clamping devices are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: used, color: red, lifting height: 4,650 mm, Year of construction: 2015, operating hours: 8,230 h, Year of manufacture: 2015 Empty weight: 8.500 kg Nedpfx Asttzuvja Ejdf Carrying capacity: 230 kg GVW: 8.730 kg Digging depth: 4.175 m