Used Door Production Line for sale (29,161)

Year of construction: 2010, condition: excellent (used), - Production per hour : 4 panels - Daily production on 8 hours shift : 32 -Year production on 250 days: 7040 -Efficiency: 1MWp/year -Required Power: 40kW - Electric Feeding : V 380/3 + N +T 50 Hz -Water Consumption : 210 litres / our (0 litres with refrigeration) -Air consumption: 7000 liters / hour Final Product A) Standard 36 square cells 103 x 103 mm (4”) Panel with typical dimensions: 990 x 450 mm Power per cell: 1,5 Wp Cells per panel: 36 Year Production per shift : 380.160 Wp Panels per year: 7040 B) Standard 72 square cells 103 x 103 mm (4”) Panel with typical dimensions : 1300 x 660 mm Power per cell : 1,4 Wp Cells per panel : 72 Year Production per shift : 760.320 Wp Panels per year: 7040 C) Standard 36 square cells 125 x 125 mm (5”) Panel with typical dimensions : 1200 x 540 mm Power per cell : 2,5 Wp Cells per panel : 36 Year Production per shift : 633.600 Wp Panels per year : 7040 D) Standard 72 square cells 125 x 125 mm (5”) Panel with typical dimensions : 1600 x 800 mm Kwjdpsuhwmgjfx Aaljw Power per cell : 2,5 Wp Cells per panel: 72 Year Production per shift : 1.267.200 Wp Panels per year: 7040 E) Standard 36 square cells 156 x 156 mm (6”) Panel with typical dimensions : 1450 x 650 mm Power per cell : 3,5 Wp Cells per panel : 36 Stran 4 od 7 Year Production per shift : 887.040 Wp Panels per year : 7040 F) Standard 72 square cells 156 x 156 mm (6”) Panels with typical dimensions : 1950 x 980 mm Power per cell : 3,5 Wp Cells per panel : 72 Year Production per shift : 1.774.080 Wp

Condition: excellent (used), Year of construction: 2018, Biscuit line Capacity - 250-300kg/h Year - 2018 Dough mixer 100kg batch, Biscuit rotary moulder 800mm width, Ksdpfxow Nxvus Aaljww Tunnel oven, wire mesh belt 500mm width, 18m baking zone, 1.5m inlet conveyer and 1.5m outlet conveyer, total 21m, electric, 4 temperature controlled zones with separate control for upper and lower zone, automatic controlled tracking of the belt

Condition: excellent (used), Year of construction: 2017, Pellet production line ANDRITZ PALADIN 2,5 t/h Year - 2017 , Only Press 2012 Working hours - 6.600 Exellent condition !! 1. Hydraulick - Electro crane for feeding logs 2. Logs Debarker 3. Wood chepar - 65 x 115 cm - 315 Kw electro motor 4. Hydraulic floor - New (additional field) 2 x fields 8x2m. 5. Input Lateral Transporter (606x606) Drive: hydraulic drive 5,5kW, 4hydrocilinders. Serves for raw material feed and up to 50 ° (chop and sawdust) up to 30m in length. For the towel element, Gal's transport chain is used, with hardwood slats attached to it, and the name of the flywheel carrier. It consists of a zipper, angle, flat and drive module. Drive: Hellicocentric 7.5 kW gearshift gear, class IE2. 6. Input silos Hydraulic drive 5,5kW, 2 hydrocilinders. 7. Double screw feeder Screw feeder ~4m with two screws. Used for feeding material into drying drum (through rotational valve). 8. Industry furnace – 2,5 MW (new burners, new generation). Zmaj 2,5MW is furnace designed specially for air heating in process industry. It uses exclusively pellet as fuel. It consists of 6 separate burners with automatic pellet feed. By burning pellet, furnace reaches preset temperature of air. Thermal power: 1.2MW. Volume of burner chamber: 3m3. Number of burners: 6. Power per burner: 200kW. Control: separate for each burner. Insulation: Tervol HTB 700 9. Hot air mixer Capacity: 48.000 m3/h. 10. Rotary drum dryer 3t/h Drive: 2 x 5,5kW. Capacity: 3t/h. 11. Pipelines 12. Cyclone separator 2900 Cyclon separator 2900 is part of air transport system used for separation of transporter fluid (air) from transported material (particles of sawdust). It is conected to SC fan – a drive element for air transport system. It's placed directly over the rotational valve and hammer mills. Delivered with support construction. 13. Rotational valve B (x6 small used, 2 new) Power: 3kW. Big sized rotor. 14. Hammermill 3t/h Hammers: S=10mm, HARDOX. Capacity: 3 t/h. 15. SC CB fan It consists of a chassis, a chassis, and a drive. The fan's inlet is connected with a single 1800 Kwjdpfx Aaeq Rfhdelsw cyclone and the outlet with the Ø900 pipe funnel. Serves air transport from hammer mills. Capacity: 48.000m3/h. Drive: 55kW. 16. SC fan Capacity: 48.000m3/h. Drive: 50kW. 17. Cyclone1700 (x6) 18. Support construction for cyclone battery With maintenanace platform. 19. Screw feeder CB 20. PELLET PRESS ADNRITZ PALADIN 1600 ( 2 x 90 Kw ) Screw feeder beneath the cyclone battery ~5m. 21. Homogenizer – New. (new generation) Device for biomass homogenization. Provides autonomy for rest of the process. Drive: motor-reduktor 5kW. 22. Bucket elevator – Homogenizer Tranporting device for sawdust. INOX buckets, rubber belt. Drive: 3kW. 23. Preconditioner Konditioner without screw feeder. Directly influences quality of pellet and pellet press tool endurance. 24. Automatic Packing unit - 6t/h

Year of construction: 1990, condition: like new (used), Short/ Noodles pasta line: - capacity 400 kg / h - Delivery conveyor - mixer - dispenser, water / flour, horizontal - worm conveyor - Press - Vibro feeder , reconditioned in 2010 - First dryer , reconditioned in 2010 - Secound Dryer - Two drying strips - Two strips for dried pasta - Metal Detector - Automatic packing unit Kwodpfx Aaeh Dxgaeljw

Condition: good (used), Year of construction: 1992, Manufacturer - ERW Year - 1992 Range of round pipe - 21 - 76 mm Kwsdjdlqkqjpfx Aalew Range of square pipe - 20x20 - 60x60 mm Sheet thickness - 0,8 - 3,5 mm Speed - 60 m/min. Lenght of line - 50 m Tools : square pipes - 25,32,38mm round pipes - 40, 51 mm Welding power - 180 KW Anode voltage - 14 kv Anode dissipation - 70 kw Frequency - up to 30 Mhz

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, year of last overhaul: 2024, Equipment: documentation/manual, Original Japanese line for the production of cardboard books. 16 gluing stations, presses, transfers, cover attachment, three-knife, corner rounding. Capacity up to 5,000 cardboard books per hour Special cardboard folding machines included Kwedpjwfr Udefx Aalsw

Condition: new, Year of construction: 2026, Industrial Edge Banding Machine Kwjdpfxoyb Rxls Aalsw The design of the edge banding machine ensures perfect application of 35 mm edge band tape, and supports workpiece thicknesses from 7.5 to 60 mm, covering a wide range of edge banding needs including situations such as missing corners or open spaces. It is also engineered for door panel structures with special configurations, allowing edge banding without requiring additional processing steps. Total power: 34.5 kW Minimum workpiece length: >= 120 mm Minimum workpiece width: >= 35 mm Workpiece thickness: 7.7 – 60 mm Edge band thickness: 0.4 – 3 mm Feed speed: 18/22/26 m/min Minimum workpiece dimensions: 300 x 35 mm Weight: 5130 kg Dimensions: 10,000 x 1,050 x 1,930 mm 6-sided CNC Drilling Center – ND612DTL The ND612CTL is an enhanced model capable of 6-side drilling, front/rear grooving, front milling, side milling, and side grooving. It also processes special features such as cable channels, Lamello joints, LogiClip connectors, and upper/lower hinge mortises, which meet a variety of process requirements while offering maximum flexibility for individual batch production. The machine is equipped with an upper and lower drilling block, an ATC8 main spindle with 5.5 kW power, and a 2+8 tool changer magazine.

Condition: excellent (used), functionality: fully functional, Equipment: documentation/manual, Original Japanese line for the production of cardboard books. Offline set consists of a machine for gluing cardboard books - 8 stations. Glue application from rollers. Separate press, machine for wrapping the cover. It is possible to buy a Wholenberg three-knife set with a set for rounding corners Kodpfx Aajwf Rnvsleww I will sell to the company that offers the highest price.

Condition: used, Parquet mosaic production line length 160 mm: 1. Schroeder mosaic press MTA-2 PE 1992 r 7,3 KW 2. Schroeder feeder PST 1992 r 3. Schroeder feeder SB35 B 1992 r 4. schroeder feeder BA-2 1992 r 5. schroeder feeder BA-2 1992 r 6. Schroeder feeder SB35 B 1992 r 7. WENIG GMBH P 120 double edging machine 8. WENIG GMBH P121 Thicknessing machine with cutters ( not Hollowing heads) 9. WENIG GMBH P122 multi-saw 10. WENIG GMBH 135 sorter - sorting system for 3 classes with interchangeable magazines (containers). Magazines 200pcs. Kwjdetp I Hcepfx Aalow

Condition: good (used), Year of construction: 2000, Schroeder Mosaic Press 160mm. Kwjdpfx Aaor Iyvbelow Gluing patterns - brick / English pattern plate 640x274mm and halves 640x137mm glued in 6 variants: - single brick offset 50% - double brick offset 50 % - triple brick offset 50 % - single brick offset 25 % - double brick offset 25 % - triple brick offset 25 %

Condition: new, We manufacture the production line that enables the production of roof, wall and cold room panels in desired sizes. Please contact us for additional information and technical documents. Kwedpfxsf Nqkds Aaljw

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 13688, Year of construction: 2012, empty load weight: 4,990 kg, Fully automated, horizontal production line for IGUs and spacer frames! Production capacity of 1200 units per shift! TECHNICAL DETAILS Production capacity: 150 units/h MACHINE DETAILS Electrical Data Voltage: 480 VAC Kwodpsxdibpjfx Aalow Frequency: 50/60 Hz Phases: 3 Maximum motor capacity: 2 A Short-circuit current: 5,000 A Power: 142 kVA Machine weight: 4,990 kg EQUIPMENT GED Intercept Ultra/Thin Spacer Frame Machine i-3 - CE version Warm-edge spacer manufacturing system Production of Intercept ULTRA stainless steel, ThinPlate, or BlackLine Note: The machine is available from 02/12/2025!

Year of construction: 1990, condition: good (used), I sell the door production machine MAKA, year 1990. Kwjdpfx Aegiwl Doalew Combined oscillating mortiser and drilling machine. Available immediately

Condition: excellent (used), functionality: fully functional, working width: 1,400 mm, plate length: 3,500 mm, stroke length: 450 mm, Automatic Hydraulic Pressing Line with Heated Platens – Excellent Condition We offer a complete industrial pressing line with a fully automatic continuous cycle (loading – pressing – unloading and stacking), ideal for the production of 2- and 3-layer parquet, veneering, engineered flooring, and other wood-based applications. Technical Specifications: Work platen dimensions: 3500 x 1400 mm Heavy-duty drilled solid steel platens Opening stroke: 450 mm Heating system: diathermic oil boiler (capacity: 200 liters) 6 large-diameter pistons – top-down pressing Platen height from floor: 800 mm Platen closing time: 1–2 seconds Opening/closing cycle time: 2–3 seconds Working pressure: 10 kg/cm² Installed power: 10 kW Automatic loading conveyor Unloading roller conveyors Kwedpfxswiw Uqs Aalew Robust frame made of seamless steel sheets Independent electrical control panel The machine is in excellent working condition. Its heavy-duty construction ensures reliability and durability in demanding industrial environments. Price: negotiable Feel free to contact us for more information, photos, or to schedule a machine inspection

Year of construction: 2018, condition: excellent (used), functionality: fully functional, TYPE 318:: COATING DRUM 1600 For the application of various taste and aroma giving materials by using various aromatising techniques. The special drum profile offers following main advantages: - optimal rolling of the product for uniform coating - minimum possible friction/damage of the product surface - no hidden corners, easy to clean, bacteriologically optimal surface. Adjustable drum speed, by frequency controlled AC gear motor 1.5 kW. Drum diameter: 1600 mm Drum length: 4000 mm Drum height : 3270 mm TYPE 284:: DRUM DRIER/ROASTER 1600 PTFE Newly developed short and medium range infrared roaster for special thermal post treatment of expanded extrudate. The whole drum is coated with a low-wear PTFE-layer. This secures processing of extremely sticky coated extrudates. Unlike the conventional hot air drying process, this drying system works with a very high degree of efficiency. The whole machine is made of rust free stainless steel. The radiation elements are attached to a common carrying arm in the drum. The roasting drum runs on special, low-noise carrier rollers and corresponds to the safety regulations and is equipped with a corrosion free covering to reduce energy losses. The rpm of the drum is adjustable continuously. The drive is carried out by a three-phase motor 1.5 kW. Kodpfowbqx Hex Aalsww Drum diameter: 1600 mm Electrical heating power: 126 kW Drum length:4300 mm Drum height : 2960 mm TYPE 361:: COOLING DRUM 1600 For cooling of sticky and hot extruded products under rotation for separation. The cooling is carried out with the help of room air, which is blown controllably into the drum by a middle pressure blower 1.85 kW AC. Please note: depending on the product characteristics, additional cooling might be necessary for breakfastcereals before the product can be packed. Drum diameter :1600 mm Drum length: 4000 mm Drum height : 2890 mm

Condition: excellent (used), The line for gnocchi includes: - GLASS (Germany) cooking kettle, type PRO-3, tilting, 500 ltr. capacity , with mixing, vacuum and cooling - bin loader for 200 ltr. bins feeding the dough into the forming machine - SANDORE (Italy) forming machine , type NF 100 C, power 8.5 kW - segment feeder, type Z, feeding the product to the vibrating tunnel, width: 400 cm, height 200 cm, drying and cleaning the product (vibrating screens, blowing turbines) - SARP (Italy) vibrating tunnel, type STR 4107, power 4.7 kW - SARP (Italy) waste and water separator, model FILTRO, with vacuum extraction from a vibrating tunnel, power 2.2 kW - conveyor feeding to the weighing machine, type Z, height 500 cm - weigher platform with stairs, dimensions: 500 cm x 500 cm on posts 220 cm high - BVBA (Belgium) 10-head weigher, type 01AAH / WS - TIROMAT BL-150 (Italy) packing machine, type ETI 422N, linear packing machine for vacuum packing, 2 dimensions of forms - segment conveyor that discharges the finished product to the carton boxes packing warehouse, a spiral conveyor that outputs packages to a height of 260 cm + a straight section of 20 meters Kwedpfxofwmt Ue Aalew

Condition: used, Granulation and packaging line. Model: HM700E PRO 11KW Year of manufacture: 2022 It includes: Hammer mill - shredder Chip mixer Chip feeder Granulator Vibrating table Product feed belt (conveyor belt) Pellet hopper with packaging equipment Bag sealer and chip moisture meter Hammer mill with cyclone Motor: 11 kW / 400 V Productivity: 300 - 700 kg / h Weight: 360 kg Soft start installed Cutting system 16 hammers Chip mixer: Volume: 1.0 m³ Chip feeder: Kwedpfx Asxcy D Eealsw Motor: 3.3 kW / 380V Feeds up to 800kg / h Granulator: Motor: 22 kW / 380V/50hz; Productivity: 300 - 700 kg/h Weight: 590kg Soft start installed Vibrating table: Weight 90kg Product feed belt (conveyor belt): Dimensions: 5m × 0.4m. Automated packaging equipment: Dimensions: 1, 90x2, 50x2, 30 Volume: 1.5m³ Packing in bags: 1 - 50kg Equipped with two types of scales Bag sealer 220V Moisture meter

Condition: new, Year of construction: 2025, functionality: fully functional, We present a revolutionary burek-making machine that enhances production with automatic burek devices, bakery equipment, industrial burek technology, burek machines, and bakery tools—delivering perfectly baked burek every time. Evolutionary Machine – Burek Production Line! Advantages of the Burek Line or Machine: Process Automation: Reduces the need for manual labor, increasing efficiency and production speed. Consistent Quality: Ensures every burek is evenly baked and filled, delivering exceptional taste. Waste Reduction: Precise measurements and automation minimize material waste. Hygiene: Easy to clean and maintain, ensuring high hygiene standards. Increased Capacity: Allows for the production of larger quantities of burek in less time. Versatility: Capable of making various types of borek with a wide range of fillings. Cost-Effectiveness: Reduces production costs over time and enhances profitability. We proudly present the latest achievement in the world of gastronomy – a burek machine that will elevate your burek production to a whole new level! This innovative machine will transform the way you prepare and serve traditional burek. With an intuitive design and advanced features, our burek machine is created to simplify the production process while ensuring perfect quality and taste in every bite. Simply place the dough and filling of your choice, and the machine will do the rest. Thanks to precise technology and settings, every burek will be evenly baked, crispy on the outside, and juicy and flavorful on the inside. The result is absolute perfection in every bite. Kedpfxjwhcz Ts Aaljww Our burek machine is also highly hygienic and easy to maintain. High-quality materials ensure the device's durability and reliability, while easy cleaning allows for a quick transition to the next batch of delicious burek. Don't waste time and energy on manual burek production. Enhance your burek-making process with our machine and satisfy the tastes of all your happy customers. Free yourself from heavy labor and enjoy creating the perfect burek with our revolutionary machine. Let your bakery become the epicenter of flavor and quality with a burek machine that sets new industry standards. Take advantage of this incredible technology and make your culinary dreams come true. Technical Specifications: Power: 3 + 6 kW (3 kW for the line, 6 kW for fat melting heaters) Line Length: 4.8 meters Production Capacity: Adjustable speed allows output from 40 to 120 kg/h Touch Panel Control Unit: Programmable for up to 100 recipes Applications: Perfect for pies, layered borek, and rolled borek Optional Additional Unit for Fillings and Toppings: €5,000 This machine is designed exclusively for the European market.

Condition: excellent (used), Year of construction: 2008, For sale complete PVC carpentry production line, brand URBAN, composed of: *1. Welding machine at 2 ends; URBAN brand, model: AKS 5305-FF, serial number: 53372, year of manufacture: 2007, perfect working condition; *2. Channel milling machine; URBAN brand, model: WS 103, serial number: 790, year of manufacture 2007, perfect working condition; *3. 2-headed saw: brand RAPID, model DGS 100, serial number: 004606128, year of manufacture 2010, sold together with vacuum cleaner with bags, perfect working condition; *4. MACC rebar cutting saw, model NEW 275, serial number: 88266, year of manufacture 2008, perfect working condition; *5. Pantograph brand URBAN, model MLA A23 – 100466321S, serial number: 528-0, year of manufacture: 2008, perfect working condition; Kodpoucl Dcsfx Aaloww 6. Upright milling machine: URBAN brand, model M7CRH-100149891, serial number 559, year of manufacture 2008, perfect working condition; *7. De burring machine with 2 groups of cutters; brand URBAN, model SV 280, serial number: 29342, year of manufacture 2008, perfect working condition; *8. Saw for cutting sticks: brand URBAN, model GLS 102; serial number: 102015; year of manufacture 2010, perfect working condition; The production capacity of the line is 30-50 units/8h (depending on the number of people serving the line). The line was used very little from 2010 to 2014, and not at maximum capacity. We can also sell individual machines on request from the line. Net price complete line 33.500 Euro + VAT, negotiable, FCA Oradea.

Year of construction: 2015, condition: used, W and C Profile Production Line for Sale Designed for the production of road barriers, posts, and fastening elements. Fully equipped line suitable for continuous industrial manufacturing. The line consists of: - Two decoilers Kjdpfxsxhf R Ij Aalsww - Post production line - Parapet (guardrail) production line - Two presses for fastener manufacturing Technical specifications: Length: 17 m Width: 1 m Height: 1 m Motor power: 22 kW Weight: 18 t Year of manufacture: 2015 Manufacturer: Chengxing Machinery (China) Purpose and advantages: This W and C profile production line is designed for manufacturing various road safety components: detachable road barriers, support posts, and fastening parts. The equipment ensures a reliable, stable, and consistent production process. The machine is available for inspection. If you have any further questions, please do not hesitate to contact us.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Sturtz fully automatic welding (2 machines x 4 head) and double head corner cleaning line - 1 x welder VSM40/26 - 1 x welder VSM30/26 - 1 x handling with verticat transport system - 1 x tilting table - 1 x 2 head corner cleaner with drilling head's - 1 x outfeed table adjusted for Rehau Brillant/Euro70, Synego and Geneo Kwedpfx Asvkdubsaljw the line is still in production, can be inspected in working conditions fully functional, very good conditions

Condition: good (used), Year of construction: 1999, 1) layer infeed systen (2 lines with 3 hoppers (300, 400, 500 mm) each incl. 2 2 x gluing units + 2 cut off saws 2) vacuum stacking unit + infeed transport belt for press 3) press unit 4) vacuum de- stacking unit + outfeed transport belt 5) all control systems for complete line Kwjdpfjhmk Umox Aaljw capacity: 10 strokes / min or approx 2400 layers/ 4 hrs Product: 3 layer lamella surface with max dimension 2208 x 186 x 4 mm

Condition: new, functionality: fully functional, Year of construction: 2026, machine/vehicle number: ALÜMİNYUM TEK KAFALI PENCERE ÜRETİM SETİ, • Enables production of 46 - 60 windows in an 8-hour shift Kwedporfy Dwjfx Aalsw • Our set offers the most competitive price to customers with various machine options • Available in 380 Volt or 220 Volt configurations • Complies with CE (European) standards • Door-to-door delivery prices worldwide • References from previous clients in your country available upon request MACHINE CONTENT • SC 402 Aluminum & PVC Up-cut Saw (Ø550 mm) & SC 403 Aluminum & PVC Up-cut Saw (Ø600 & Ø650 mm miter saw) • SC 542 Aluminum Copy Router • SC 211 Aluminum & PVC Mullion Processing Machine & SC 211 S Series mullion processing machine with quick-change blades • SC 901 S Pneumatic Aluminum Corner Crimper & SC 902 S Hydraulic Aluminum Corner Crimper You can increase your production capacity with different machine options. Please contact us for a catalogue.

Condition: ready for operation (used), Year of construction: 1978, The machine is in perfect working condition. Demonstration on site or live video in action is possible. Ksdpfx Aaov Uaanjleww

Condition: ready for operation (used), The machine is in perfect working condition. Demonstration on site or live video demonstration is possible. Ksdpfov Uabfsx Aaloww