Door production machine

Maka by Kuper

Year of construction: 2004, condition: reconditioned (used), Stock-No. 2054 1used, partly overhauled and functionally tested Single-screw extruder AlphaTec A-ES 75.28 Dodpfsiyx Uzex Afnekh Screw –Ø 75 mm- 28 LD main drive 75 kW- AC Screw speed up to 80 r.p.m. - adjustable 1x venting port with vacuum-pump cylinder barrel heating apporx. 30 kW installed 3x addituional temperature controller for down-stream equipment Control board overhauled You´re welcome for inspection visit in our stock Wuppertal-Germany More extruders available

Condition: good (used), Year of construction: 2007, Technical characteristics : - Max machinable length 3200 mm - Minimum machinable length 200 mm - Maximum width 200 mm - Minimum width 40 mm - Maximum workpiece height 130 mm - Depth with max Ø to tenon 320 mm: 105 mm - Tenoning carriage speed min / max 0/100 m / min - Min / max profiling speed: 3/15 m / min Tenoning: 1- end cut saw 5.5 hp (4 kW) Saw Ø 400 mm 2- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard 3- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard Vertical positioning with continuous axis 4- Digital angular adjustment clamp Profiling: 5-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tools 130/240 mm Axle stroke 280 mm Time-delayed anti-shattering intervention during calibration Double direction of rotation Vertical and horizontal positioning with continuous axis 6-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Axle stroke 280 mm Vertical and horizontal positioning with continuous axis 7-: router to be profiled on the right Dkodpfst R T Hcjx Afnoh Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Vertical and horizontal positioning with continuous axis 8-: close-out recovery group Vertical and horizontal positioning with continuous axis Device for extracting the shutter 9-: lower horizontal shaft for groove Vertical and horizontal positioning with continuous axis 88.5 hp (66.4kW) 10-: digital guide 11-: Return of parts to the operator NO TOOLS AVAILABLE OBTAIN ADDITIONAL PHOTOS NOTE: SUBJECT TO CHANGES IN TECHNICAL DATA

Condition: excellent (used), Line for door jambs (frames), with END-CUTTING, ROUTERING for COUNTER-PLATE and HINGE INSERTION (Anuba). Composed of: X10030A) Loading Conveyor X10030B) Transfer Conveyor X10030C) Double-end cutting and drilling machine "AMS" - Left-side Cutting 45° - Drilling - Cutting 90° - Right-side Cutting 45° - Drilling X10030D) Angular Conveyor (90°) X10030E) Anuba Inserting Machine "MASTERWOOD" Mod. MULTITEC X10030F) Strike Plate Routering Machine "MASTERWOOD" Mod. Teknomat 3000 Djdpfx Asqwyclsfnekh

Condition: new, Year of construction: 2024, Cutting capacity: 55x360, 80x340, 95x325, 125x295, 135x280 mm Minimum work piece thickness mm.10 Working table tilted 8° Cutting unit technical features: Pneumatic upstroke saw TR500 Motor power 10 HP (7,5 kW), Volt 400/50 Hz. TCT Blade dia.500 mm., F=30 Z=144 S=4,6 Cutting cycle speed: 4 seconds Push feed system technical features: PUSH FEED SYSTEM AVAILABLE LEFT AND RIGHT SIDE Feeding by rack and pinion system and brushless motor Positioning precision +/- 0,4 mm Strong infeed motor for a packet weight of 80 kgs Maximum push feed system speed 90 m/min Pneumatic rising of the pusher at the end of the cutting cycle and overhead returning. Dkodshw Ng Iepfx Afnoh Data entry management: 12 inch TOUCH-SCREEN Controller (800x600 pixel) USB Port Ethernet Port LINUX Operating system Loading and save machine parameters via USB Port Cutting cycle (pattern) editing and entered directly on the controller Transfer of cutting lists created by PC via USB or Ethernet Port Working software: Manual input of loading board length Partial optimization without length reading of the board Cutting cycle with 3 optimization options (Maximum length, Sequence and Board sequence) N°1000 cutting lists made up of 11 sizes or one list of 10000 sizes in sequence Package "OPTI": automatic board length detection and full optimization. Piece length reading by photocell Cutting cycle: with 6 optimizing criteria: (Longest length, Sequence, Board sequence, Volume, Minimum waste and Priority length) Package "OPTI PLUS": total optimization with knots and defects removal (OPTION NOT INSTALLED ON THE MACHINE) Technical Description: Package "OPTI PLUS": for knots and defects removal Photocell for reading wood mapping knots and defects Marking with fluorescent chalks/crayon (Note Ð Can only be ordered in combination with ZA250) Pneumatic side clamp device

Condition: new, Working width 3500 mm Djdpfx Afjd Rzc Ronskh Working height 2300 mm Number of cylinders 4 St.

Condition: used, machine/vehicle number: 4/14242, Frank Floor Sanding Machine FSR used Engine power: 0,75 KW Voltage: 230 Volt 5 amps, 50 Hz, Dkjdpfxeb Auu Re Afneh Machine no.: 4/14242 Dust bag Location: Ex warehouse Bitburg

Condition: new, Special offer price for stock goods! Only while stocks last! Price ex stock, plus VAT. Belt sander: Bernardo Dsdpfx Ajfnr Aiefnskh type/model: MS 75 x 2000 S Condition: new belt dimensions: 75 x 2000 mm belt speed: 29 m/sec. contact wheel Ø x W: 200 / 80 mm surface grinding table: 460 x 75 mm suction connection: 100 mm motor output power S1 100%: 3,0 kW motor input power S6 40%: 4,0 kW Voltage: 400 V length: 1080 mm width: 440 mm height: 1000 mm Weight approx.: 66 kg Features: Good grinding performance due to high belt speed Quick adjustment for horizontal and inclined position Continuous plane grinding surface for optimum grinding of long workpieces Constant belt tension due to spring-loaded tensioning device Universally applicable for sanding edges, surfaces and for cylindrical sanding Including quick tensioning system for fast belt change Easy adjustment of parallel belt run by means of adjusting screw Graphite coating on the face grinding surface increases the sliding properties of the grinding belt Scope of delivery: - Sanding belt K 80 - Hinged protective disc - Grinding and support table - Workpiece stop - Dust extraction nozzle - Separate off button - Base frame

Condition: good (used), Year of construction: 2007, machine/vehicle number: 94323, travel distance X-axis: 3,060 mm, travel distance Y-axis: 1,260 mm, travel distance Z-axis: 150 mm, total height: 2,400 mm, total length: 4,400 mm, total width: 2,800 mm, overall weight: 3,130 kg, I will sell a MACHINING CENTER IN CONTINUOUS OPERATION CNC machining center Biesse ROVER 3.03 functional to view in Wadowice Feed X 3060 mm Dkodpfewpthtjx Afnsh Feed Y 1260 mm Feed Z 150 mm Control type CNC XP 600

Condition: excellent (used), Year of construction: 1980, WAFIOS DF5 Wire range- 1,5- 5,0 mm Mesh with - 20 - 100 mm Working with - max.2000mm Capacity - 170 m2 / hour Dkedpfxov Uw Dde Afnsh Tooling for the mesh width - 60 mm

Condition: new, Year of construction: 2025, total length: 1,600 mm, total width: 2,200 mm, total height: 2,350 mm, overall weight: 250 kg, type of input current: three-phase, working width: 1,400 mm, Paint booth, paint wall, suction TQN1414 With right or left side discharge. Working dimensions (mm): 1400 (width) x 1400 (height) x 800 (depth) Overall dimensions (mm): 1600 (width) x 2350 (height) x 1250 depth SPECIFICATION: • Fan power 1.5 kW, • Efficiency 6,500 m³/h, Dsdpfxjd S N I Nj Afnekh • 2 x 100% polyester filter • Filtration degree at the level of 99.9%, • Control panel IP 66, • Automatic filter cleaning • Hermetic lighting IP 65. • Paint tank Cabin available immediately (Stock status) SELECT BUMEX SP. Z O.O. Very high quality machines among those offered on the market. Professional advice and service. Warranty. Warranty and post-warranty service. Full technical documentation. 100% satisfaction of our customers. All BUMEX SP. Z O.O. brand products have an EC certificate. We offer our own transport - prices are set each time, for a given offer. We issue VAT invoices. Short lead times! Possibility to order machines in various, personalized configurations and dimensions! Please contact us.