Used Donau Danumeric 440 for sale (56)

Condition: used, Year of construction: 1980, taper MK 3 feed: 4 Stufen 2580 Dedpfxszfqmpe Aaxewb x-travel 2500 mm throat 1000 mm 1000/2800 mm weight 3,7 t

Condition: refurbished (used), Year of construction: 1983, Work table 600mm x 1200mm Arm travel 600mm Tool holder MK 4 Dodpfsmt Ed Rox Aaxewb Drilling capacity 32mm in steel Thread cutting device Coolant system Electrics 24V control voltage Emergency stop 2-channel Guard on the drill Completely overhauled 2025 12 months warranty New paint RAL 7035/7031

Condition: refurbished (used), Year of construction: 1976, Work table 500mm x 1200mm Dedpfxewnn S Re Aaxjwb Arm travel distance 600mm Tool holder MK 4 Drilling capacity 32mm in steel Thread cutting device Coolant device Electronics 24V control voltage Emergency stop 2-channel Safety device on the drill Completely overhauled in 2025 12 months warranty New paint RAL 7035/7031

Condition: used, Year of construction: 1980, hobbing length 1750 mm milling width 260 mm max. module 10 min. module 12 total power requirement 8 kW weight of the machine ca. 4500 kg dimensions of the machine ca. m D O N A U - K N A P P (Germany) Universal Automatic Rack Milling Machine Model UZFM – V 300 H Year approx. 1980 Serial No. 80-234x Max. length of rack 1,750 mm Milling travel / milling width cross max. 260 mm Module, steel / cast iron 10 / 12 Table clamping size 275 x 1,850 mm Mounting height below cutter, depending on cutter Ø 136 – 410 mm Cutter Ø, min./max Ø 125 + 2 x cutting depth / Ø 160 mm Cutter width max. floating / with support 50 / 140 mm Cutter mandrel Ø max. 50 mm Milling spindle head, swivelling right / left 30 / 45 ° Dwjdpfot Hxagjx Aaxeb 9 spindle speeds 22 – 179 rpm Milling slide swivelling right / left 30 ° Feeds, infinitely variable (milling slide) 0 – 600 mm/min Quick return 2,000 mm/min Milling spindle drive approx. 4 kW Total electrical load 8 kW - 400 V - 50 Hz Weight 4,500 kg Accessories / Special Features: * Automatic milling cycle control via cam bloc mounted on milling slide and table slide with possibility of jump switching (= automatic by-pass of an area which should not be milled) and pendulum milling operation (= synchronized milling on the first half of table, and workpiece change on the second half. * hydraulic workpiece clamping device: 1.800 x 260 mm each, clamping width 140 mm, clamping height inside the device 60 mm, with own hydraulic aggregate, hand switch, * Manual fine adjustment of table (0.001 mm) for exact positioning in a pre-milled rackgear. * Various change gears (approx. 10 pieces). * 2 cutter mandrels. * Various other accessories. * Central lubrication. * Built-in hydraulic unit. * Simple Coolant device. Separate switch cabinet, various rack cutter up to 160 dia. This machine is especially suitable for milling racks, and also for manufacturing broaching tools (relief milling is possible by swivelling the cutter head). Condition : Very good. Machine can be inspected under power. Delivery : Ex stock, as inspected Payment : Net, after conclusion of contract

Condition: used, Year of construction: 1990, hobbing length 2100 mm milling width 300 mm max. module 16/18 min. module total power requirement 10 kW Dwsdpfx Aajt Hwwqoxsb weight of the machine ca. 5 t dimensions of the machine ca. m

Condition: like new (used), Donau Donauflex 135 High-Speed Radial Drilling Machine Manufacturer: Donau Model: Donauflex 135 Dwjdpfx Aaozgvmqsxeb Year of manufacture: 2020 Condition: Very good, used but like new Available immediately from stock.

Condition: used, Year of construction: 1971, hobbing length 1750 mm milling width 260 mm max. module 10 mm table size incl. water gutter 460 x 2100 mm table clamping surface: 250 x 1850 mm cutter width - max. 100 mm feed of the milling slide, stepless 0 - 500 mm/min. rapid traverse feeds 3000 mm/min milling head -swivable +/- 30 ° Rotation speed range of milling head, in 9 steps 29 - 178 rpm Milling head swivable 2 sides helical gearcutting 30 ° weight of the machine ca. 4 t dimensions of the machine ca. 4 x 1,85 x 1,85 m Equipment/accessories - 7 vices - change wheels - Clamping devices - Documentation Dwedpfx Aajylpzyexjb

Condition: good (used), 1 used quick-change radial drilling machine Manufacturer: Donau Type: DR 28 Z Year of manufacture: 1985 Technical data: - Drilling capacity in full steel ST 60: 28 mm - Drilling capacity in cast iron GG 25: 40 mm - Thread cutting in steel ST 60: M 30 - Thread cutting in cast iron GG 25: M 40 - Drill spindle taper: MK 3 - Spindle diameter: 50 mm - Quill stroke: 150 mm - 18 drill spindle speeds: 45 - 2240 rpm - 4 drilling feed rates: 0.1 - 0.45 mm - Min./max. distance spindle – table: 300 / 700 mm - Drilling radius min/max: 305 / 1005 mm - Table height: 820 mm - Table size: 1200 x 600 mm - Drive: 400 V / 6 kW - Space requirement approx.: W 1300 x H 2800 x D 2300 mm - Weight approx.: 1500 kg - Including: - Thread cutting device - Hydraulic column and boom clamping - Coolant system - T-slots, vertical, on the left side of the machine Dwsdpozl Ufcofx Aaxjb

Condition: reconditioned (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 2,900 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 700 mm, CNC Drilling and Milling Center Donau DANUSYS 2910, Year of manufacture 2002, overhauled Technical Data: Control: Heidenhain iTNC 530 Travel distances (X, Y, Z axis): 2900 / 1000 / 700 mm Milling capacity in St 60: 300 cm³/min Drilling in solid St 60: ø 40 mm Tapping: M30 Feed rate (X, Y, Z axis): 7 / 7 / 7 m/min Spindle: HSK 63, 15,000 rpm Coolant: internal (IKZ) and external (AKZ) Dsdezlx Axepfx Aaxowb Tool changer with 32 positions, divided into 2 x 16 slots Overhauled components: - Spindle fully overhauled and rewound by the manufacturer - Spindle controller repaired - Overhaul of Heidenhain power supply unit - Main computer (MC422) and control unit (CC422) checked (Heidenhain) - Carriage and guide rail of the Y-axis replaced Additional accessories: Handwheel HR 410 Chip conveyor with integrated coolant tank Documentation (operating manual, various manuals for installed components, circuit diagram, etc.) Sale ex stock; Subject to prior sale

Condition: good (used), functionality: fully functional, quill stroke: 190 mm, spindle speed (min.): 41 rpm, spindle speed (max.): 1,800 rpm, overall weight: 1,920 kg, workpiece weight (max.): 17 kg, sheet thickness steel (max.): 32 mm, torque: 250 Nm, table height: 900 mm, branded DONAU high speed radial drilling machine type DR 32 - completely overhauled by vaumatec in 2022 - with SPECIAL TABLE PLATE (clamping surface 1400 x 1000 mm with coolant channel and drain as well as 4 adjustable feet to relieve the table frame) Technical data: Drilling capacity into solid material: St 60/E335 mm Ø 32 (at feed rate 0.20 mm/rev): GG 22 mm Ø 45 Thread cutting: St 60/E355 M26 Thread cutting: GG22 M35 Tool holder: MK4 Column diameter: mm Ø 195 Dsdpfx Aajrn Riqoxowb Distance between spindle nose and table: min./max. mm 260/660 Work table height: mm 900 Quill stroke: mm 190 Column stroke: mm 400 Spindle speeds Speed series I : rpm. 41-1800 Feed rates: mm/rev 0.1-0; 15-0; 20-0.3 Torque at the spindle: max. Nm 250 Smooth running of the boom: Radial N 25 Smoothness of the arm: Axial N 25 Clamping effect: Radial Nm 3500 Clamping effect: Axial N 5500 Feed force: N 7500 Max. permissible mass: kg 17 Max. permissible moment of inertia: kgm 0.002176 Workpiece: max. table load: kg 1000 Center of gravity: in the middle of the work surface

Condition: used, Year of construction: 1960, Technical details: workpiece height max.: 600 mm Arm length: ca. 700 mm Dwodpfx Ajx Afn Neaxjb bore capacity in steel (diameter): 25 mm Table dimensions: 1100 x 400 mm

Condition: used, Year of construction: 1971, Technical details: bore capacity in steel (diameter): 23 mm workpiece height max.: ./x. 2 mm drill capacity in cast iron: Ø 26 mm spindle taper: MK 3 bore spindle stroke: 135 (manual/automatic) mm range drill spindle revolution per minute: 7step U/min feed range: mm/U Table dimensions: 1200 x 500 mm table surface area: 1070 x 400 mm total power requirement: 3,55 kW weight of the machine ca.: 1,4 t dimension machine xH: 1,7 x 1,2 x 2,2 m Jib Length Arm: -vertical adjustment: 450mm and horizontal adjustment: 610mm -swiveling 360°, hydr. lock Right/left rotation for thread cutting with automatic switchover Operation via control panel Djdjv Ay T Dopfx Aaxewb Coolant tank with pump *

Condition: used, Year of construction: 1989, bore capacity in steel (diameter) 32 mm arm length 1230 mm table surface area 1200 x 500 mm bore stroke 180 mm feed - independent 0,10 - 0,15 - 0,20 - 0,30 mm turning speeds 60 - 1800 U/min taper MK 4 Dsdpfx Aaoy Aa H Nsxjwb total power requirement 2,7 kW weight of the machine ca. 1,8 t dimensions of the machine ca. 2,2 x 1,8 x 2,3 m Quick radial with: - Feed - Thread cutting device

Condition: used, Year of construction: 1968, Donau high-speed radial drill type DR 32 Speed: 60 - 1800 rpm Arm reach: 600 mm Base plate: 100 x 1400 x 110 mm Thread cutting device Coolant system Dodpfx Asx Hgkvjaxowb Machine lamp Quick-change holder with inserts Machine vice

Condition: new, SPS gear shift control card New for old For self-installation or installation by one of our service technicians Dwjdjy Rkkhepfx Aaxsb

Condition: like new (used), Suitable for your Donau DR 28Z, DR 40Z, DR 40 Digi, Danuflex 128 Djdpfx Aasy Ri Hnjxowb

Condition: good (used), Year of construction: 1988, Fast Radial Drilling Machine Hersteller: Donau Type: DR 40 DIGI STEUERUNG: NC Steuerung Construction year 1988 EINSATZBEREICHE - BOHREN Bohrleistung Gesamtloch (Stahl): 40 mm Neck (max): 800 mm SPINDLE / PIN Spindle speed (min): 335/min Spindle speed (max): 1800/min Dwedpfxeikvcas Aaxsb Anzahl der Gänge: 2 Werkzeugaufnahme: MK 4 ON SPECIFICATION Table surface: 1200 x 750 mm ELEKTRISCHE VORSCHRIFTEN Mains voltage: 400 V Mains frequency: 50 Hz ABMESSUNGEN / GEWICHTE Width: 2500 mm Depth: 1250 mm Total height: 2500 mm Weight 2.6 t Drive 6kw

Condition: refurbished (used), Repair of the tachometer circuit board for various models. Please contact us if the gear stages are no longer functioning correctly as intended. Dwsdpfjy Rfzuox Aaxjb

Condition: ready for operation (used), DONAU DR 23 - High-speed radial drilling machine - Drilling capacity / steel approx. 28 mm - Arm length 700 mm - Morse taper MK 3 - Speed range 70-1550 rpm (gearbox) - Automatic feeds 0.075-0.3 mm - Thread cutting device - Drilling depth approx. 130 mm - Hydraulic clamping - Documentation Dwodpfx Aoy Uv Tvsaxeb Dimensions: L x W x H 2 x 1.7 x 1.9 meters / Weight 1900 kg Subject to errors and omissions.

Condition: good (used), Year of construction: 1965, functionality: fully functional, throat depth: 930 mm, For sale is a Donau brand DR30 high-speed radial drilling machine. The machine is in good and fully functional condition. Technical specifications: Year of manufacture: 1965 Drilling capacity in steel (diameter): approx. 30 mm Tapping capacity in steel: approx. M36 in cast iron Spindle mount: MK 3 Spindle speeds: Continuously variable approx. 45 - 2240 rpm Dwodpfxjwal Hpj Aaxob Quill stroke: approx. 170 mm Thrust: approx. 930 mm Boom swivel range: 360° Table size: 1200 x 500 mm Spindle motor power: 4.0 kW Weight: approx. 1.8 t Dimensions (L x W x H): approx. 1.3 x 2.1 x 2.45 m Tapping device with shut-off and reversing. Motorized boom height adjustment. Left-hand drilling control, hand and foot. Transport and loading can be arranged throughout Europe upon request for an additional charge. Prices exclude VAT. Viewings are available by appointment. Contact us; our team will be happy to assist you. Trade-ins or exchanges are possible! Machine Purchase/Sale PURCHASE/SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality, yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or to contact us, visit our website.

Condition: used, Year of construction: 1991, Work table 600mm x 1200mm Column travel 600mm Tool holder MK 3 Drilling capacity 28mm in steel Tapping device Dwedpfsxpfglsx Aaxjb Coolant system Documentation

Condition: good (used), Year of construction: 1999, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, • Worktable 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drill spindle Morse taper 4 • Infinitely variable speed control • Infinitely variable quill feed • Thread cutting device • 2 T-slots (18 mm) each, machine base rear and left • Machine lamp • Central lubrication • Table surface machined on all sides • Safety guard on drill • Coolant system Dimensions and Travel Tool holder MT 4 Column diameter mm 195 Table dimensions mm 1200 x 750 Number of T-slots 5 T-slot spacing mm 125 Quill stroke mm 220 Column stroke mm 450 Distance spindle nose to table min. mm 40 max. mm 710 Distance spindle nose to base plate min. mm 840 max. mm 1510 Drilling radius min. mm 540 max. mm 1590 Working table height mm 900 Machining Data Drilling capacity solid material St 60 Ø 45 mm GG 22 Ø 55 mm Thread cutting St 60 M 36 GG 22 M 45 Main Spindle Drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range rpm 15 - 2800 Torque Nm max. 250 Constant from rpm 15 - 200 Feed Drives Feed, stepless mm/rev 0.02 - 0.7 Feed force N 12,000 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Dwjdeynt Ucepfx Aaxob Total connected load kVA 9.3 Weight DANUFLEX 145 (without packaging) with 750 x 1200 mm table kg 2,600 Documentation Operating manual, incl. Lubrication and hydraulic diagram Electrical schematic

Condition: used, Year of construction: 1991, spindle mount: MK 4, Work table 600mm x 1200mm Arm travel 600mm Dodjx N Iftepfx Aaxswb Tool holder MK 4 Drilling capacity 40mm in steel Thread cutting device Coolant system Documentation

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, • Work table 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drill spindle Morse taper 4 (MK 4) • Infinitely variable speed control • Infinitely variable quill feed • Thread cutting attachment • Two 18 mm T-slots each on rear and left of machine base • 3-axis digital readout • Machine lamp • Central lubrication • Table top machined all around • Drill guard • Coolant system Dimensions and Travels Tool holder MK 4 Column diameter mm 195 Table size mm 1200 x 750 Number of T-slots 5 T-slot spacing mm 125 Dodpox Uwpxofx Aaxswb Quill stroke mm 220 Column travel mm 450 Distance spindle nose - table top min 40 mm, max 710 mm Distance spindle nose - base plate min 840 mm, max 1510 mm Drilling radius min 540 mm, max 1590 mm Work table height mm 900 Machining Capacities Drilling capacity (solid) St 60 ⌀ 45 mm GG 22 ⌀ 55 mm Tapping St 60 M 36 GG 22 M 45 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range min⁻¹ 15 – 2,800 Torque Nm max. 250 Constant from min⁻¹ 15 – 200 Feed Drives Feed, stepless mm/rev 0.02 – 0.7 Feed force N 12,000 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Weight DANUFLEX 145 (without packaging) with table 750 x 1200 mm kg 2,600 Documentation Operating manual, incl. Lubrication and hydraulic system diagram Electrical wiring diagram

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, • Worktable 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drill spindle Morse taper 4 • Infinitely variable speed control • Infinitely variable quill feed • Thread cutting device • 2 T-slots (18 mm) each, machine base rear and left • Machine lamp • Central lubrication • Table surface machined on all sides • Safety guard on drill • Coolant system Dwodpfeyhdvkox Aaxob Dimensions and Travel Tool holder MT 4 Column diameter mm 195 Table dimensions mm 1200 x 750 Number of T-slots 5 T-slot spacing mm 125 Quill stroke mm 220 Column stroke mm 450 Distance spindle nose to table min. mm 40 max. mm 710 Distance spindle nose to base plate min. mm 840 max. mm 1510 Drilling radius min. mm 540 max. mm 1590 Working table height mm 900 Machining Data Drilling capacity solid material St 60 Ø 45 mm GG 22 Ø 55 mm Thread cutting St 60 M 36 GG 22 M 45 Main Spindle Drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range rpm 15 - 2800 Torque Nm max. 250 Constant from rpm 15 - 200 Feed Drives Feed, stepless mm/rev 0.02 - 0.7 Feed force N 12,000 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Weight DANUFLEX 145 (without packaging) with 750 x 1200 mm table kg 2,600 Documentation Operating manual, incl. Lubrication and hydraulic diagram Electrical schematic