Used Donau Dr 32 for sale (56)

Condition: used, Year of construction: 1974, bore capacity in steel (diameter) 32 (St 60) mm arm length 418 / 1018 mm workpiece height max. ca. 400 mm table surface area 1200 x 500 mm spindle taper MT 4 quill stroke 190 mm Codpfo Ad Rltox Aqveri distance table - lower edge spindle 260 - 660 mm table height over floor 800 mm spindle turning speed range 41 - 1800 U/min feeds 0,1 / 0,15 / 0,2 / 0,3 mm/U total power requirement 6 kW weight of the machine ca. 1,8 t

Condition: used, Year of construction: 1984, bore capacity in steel (diameter) 32 mm Cedpfx Ae Aa A E Rsqvjri arm length 1230 mm bore stroke 180 mm total power requirement 3 kW weight of the machine ca. 1,8 t dimensions of the machine ca. 2,2 x 1,8 x2,3 m High-speed radial drilling machines with: - Feed mechanism - Thread-cutting attachment

Condition: ready for operation (used), functionality: fully functional, overall weight: 1,800 kg, Spindle: MK4 Clamping area: 1200 x 500 Crsdpfx Aszuarmsqvji Clamping slots: Number 3, width 18, spacing 125 Maximum drilling capacity: for St 60 steel: 32 mm at 0.2 mm/rev for GG 20 cast iron: 45 mm at 0.2 mm/rev

Condition: refurbished (used), Year of construction: 1991, Work table 750 mm x 1200 mm Codpfx Asz S Tzzjqveri Outrigger travel distance 1000 mm Tool holder MK 4 Drilling capacity 32 mm in steel Threading device Coolant system Documentation

Condition: used, Year of construction: 1968, Donau high-speed radial drill type DR 32 Speed: 60 - 1800 rpm Arm reach: 600 mm Base plate: 100 x 1400 x 110 mm Thread cutting device Coolant system Crodpfx Aex Hgkveqvji Machine lamp Quick-change holder with inserts Machine vice

Condition: refurbished (used), Year of construction: 1976, Work table 500mm x 1200mm Arm travel distance 600mm Tool holder MK 4 Drilling capacity 32mm in steel Thread cutting device Coolant device Electronics 24V control voltage Crodewnn S Ropfx Aqvei Emergency stop 2-channel Safety device on the drill Completely overhauled in 2025 12 months warranty New paint RAL 7035/7031

Condition: refurbished (used), Year of construction: 1980, Worktable 500mm x 1200mm Arm travel 600mm Tool holder MK 4 Csdjx N Ih Iepfx Aqvori Drilling capacity 32mm in steel Thread cutting device Coolant system Safety device at the drill Completely overhauled in 2026

Condition: used, Year of construction: 1989, bore capacity in steel (diameter) 32 mm Codpfsy Aa H Njx Aqvori arm length 1230 mm table surface area 1200 x 500 mm bore stroke 180 mm feed - independent 0,10 - 0,15 - 0,20 - 0,30 mm turning speeds 60 - 1800 U/min taper MK 4 total power requirement 2,7 kW weight of the machine ca. 1,8 t dimensions of the machine ca. 2,2 x 1,8 x 2,3 m Quick radial with: - Feed - Thread cutting device

Condition: used, bore capacity in steel (diameter) 32 mm arm length 1230 mm table surface area 1200 x 500 mm bore stroke 180 mm feed - independent 0,10 - 0,15 - 0,20 - 0,30 mm turning speeds 45 - 1370 U/min taper MK 4 total power requirement 2,7 kW weight of the machine ca. 1,8 t dimensions of the machine ca. 2,2 x 1,8 x 2,3 m Cjdjzwg Ruepfx Aqvjri Quick radial with: - Feed - Thread cutting device

Condition: refurbished (used), Year of construction: 1983, Work table 600mm x 1200mm Arm travel 600mm Tool holder MK 4 Drilling capacity 32mm in steel Thread cutting device Coolant system Electrics 24V control voltage Emergency stop 2-channel Guard on the drill Credpfx Aemt Ed Rjqvji Completely overhauled 2025 12 months warranty New paint RAL 7035/7031

Condition: used, Year of construction: 1990, taper MK 3 serial number 4131 throat 1000 mm documentation ja clamping hydraulisch kW weight of the machine ca. 2,6 t Codpfezkbqvsx Aqvori

Condition: refurbished (used), Repair of the tachometer circuit board for various models. Credpfx Aqoy Rfzusvsi Please contact us if the gear stages are no longer functioning correctly as intended.

Condition: good (used), Year of construction: 1980, machine/vehicle number: 2226-3, Offer 26331 Technical data: - Drilling capacity in full steel ST 60: 23 mm - Drilling capacity in GG 25: 30 mm - Thread cutting in ST 60: M 20 - Thread cutting in GG 25: M 26 - Drill spindle connection: MK 3 - Quill stroke: 135 mm Cedpfxe Agtags Aqvsri - 12 drill spindle speeds: 70 - 1550 rpm - Drilling feed: 0.075 - 0.30 mm - Min./max. distance spindle – table: 220 / 670 mm - Drilling radius min./max.: 305 / 920 mm - Table size: 1060 x 600 mm - Drive: 400 V / 1.1 - 1.6 kW - Space requirement approx.: W 1200 x H 2500 x D 2300 mm - Weight approx.: 1380 kg - Includes: - Thread cutting device - Hydraulic column and boom clamping - T-slot clamping plate, vertical, on the left side of the machine

Condition: good (used), 1 used quick-change radial drilling machine Manufacturer: Donau Type: DR 28 Z Year of manufacture: 1985 Technical data: - Drilling capacity in full steel ST 60: 28 mm - Drilling capacity in cast iron GG 25: 40 mm - Thread cutting in steel ST 60: M 30 - Thread cutting in cast iron GG 25: M 40 - Drill spindle taper: MK 3 - Spindle diameter: 50 mm - Quill stroke: 150 mm Credpfx Aqozl Ufcevsi - 18 drill spindle speeds: 45 - 2240 rpm - 4 drilling feed rates: 0.1 - 0.45 mm - Min./max. distance spindle – table: 300 / 700 mm - Drilling radius min/max: 305 / 1005 mm - Table height: 820 mm - Table size: 1200 x 600 mm - Drive: 400 V / 6 kW - Space requirement approx.: W 1300 x H 2800 x D 2300 mm - Weight approx.: 1500 kg - Including: - Thread cutting device - Hydraulic column and boom clamping - Coolant system - T-slots, vertical, on the left side of the machine

Condition: used, machine/vehicle number: 1203-5, Table size: approximately 1200 x 600 mm, with a machine vise. Crsdpfx As Af Nktsqvji

Condition: ready for operation (used), DONAU DR 23 - High-speed radial drilling machine Crodpfx Ajy Uv Tvjqvji - Drilling capacity / steel approx. 28 mm - Arm length 700 mm - Morse taper MK 3 - Speed range 70-1550 rpm (gearbox) - Automatic feeds 0.075-0.3 mm - Thread cutting device - Drilling depth approx. 130 mm - Hydraulic clamping - Documentation Dimensions: L x W x H 2 x 1.7 x 1.9 meters / Weight 1900 kg Subject to errors and omissions.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, drilling capacity: 40 mm, quill travel distance: 200 mm, table length: 1,200 mm, table width: 600 mm, drill spindle length: 200 mm, overall weight: 1,700 kg, input voltage: 400 V, travel distance Y-axis: 780 mm, input frequency: 50 Hz, distance table to spindle center: 800 mm, Donau DR40 Z Manufacturer: Donau Machine type: Radial drilling machine / Quick-change radial Designation: DR40 Z Cedpfx Aoz Da Idjqvori Year of manufacture: 1992 Drilling capacity: 40mm Threading capacity: M33 in steel Taper: SK 40 Feed rate: 0.075 - 0.15 – 0.3 – 0.45 – 0.6 / revolution Drilling spindle speed: 18 Overhang: 800mm Drilling spindle stroke: 200mm Vertical adjustment of the drilling spindle head (electric): 450mm Max. distance between table and spindle: 780mm Table: 600x1200mm Machine weight: 1700 kg Documents: Operating manual, wiring diagram, spare parts list, test report The machine was completely overhauled by Vaumatec, 89431 Bächingen, in 2016 and has been used very little since. The machine is in very good condition. Purchased in 2016.

Condition: used, Donau DR52 Drilling capacity in steel (diameter) 52 mm Arm length 1140 mm Workpiece height max. 830 mm Drilling capacity in cast iron 60 mm Taper MK 5 Table size 1100 x 620 mm Drilling spindle stroke 225 mm Spindle speed range 28 - 1400 rpm Feed rate 0.1 - 0.5 mm/rev Total power consumption 10.0 kW Machine weight approx. 3.5 t Machine dimensions approx. 2.4 x 1.3 x 2.61 m Crodpfoz D U Tzox Aqvei

Condition: used, Year of construction: 1990, machine/vehicle number: 2316-3, Lg.no. 10622 Technical data: - Drilling capacity into solid steel ST 60 28 mm - Drilling capacity GG 25 40 mm - Thread cutting ST 60 M 30 Crodpfx Aju Et Nbsqvoi - Thread cutting GG 25 M 40 - Drill spindle holder MK 3 - Spindle diameter 50 mm - Quill stroke 150 mm - 18 drilling spindle speeds 45 - 2240 rpm - 4 drilling feeds 0.1 - 0.45 mm - min. / max. distance spindle - table 300 / 700 mm - Drilling radius min / max 305 / 1005 mm - Table height 820 mm - Table size 1200 x 600 mm - Drive 400 V / 6 kW - Space requirement approx. W 1300 x H 2800 x D 2300 mm - Weight approx. 1500 kg - with: - Thread cutting device - hydr. columns + boom clamping - Coolant device - Vertical T-slots on the left side of the machine

Condition: good (used), Includes tool cabinet and drill bits! 2. Table Work area: 600mm x 1200mm Tool holder: MK 4 Drilling capacity: 40mm in steel Tapping attachment Coolant system Credpoz Db Eqofx Aqvsi

Condition: ready for operation (used), Danube DR 23 - High-speed radial drilling machine - Drilling capacity / steel approx. 28 mm - Arm length approx. 700 mm - Morse taper MK 3 - Speed range 70-1550 rpm - gearbox - Feed rate range 0.075-0.3 mm - Drilling depth 130 mm - Threading device - Hydraulic clamping - Documentation Dimensions: L x W x H 2 x 1.7 x 1.9 meters / Weight 1900 kg Errors and omissions excepted. Crjdpfoztdz Asx Aqvoi

Condition: like new (used), Suitable for your Donau DR 28Z, DR 40Z, DR 40 Digi, Danuflex 128 Crsdpfx Aoy Ri Hnoqvji

Condition: good (used), Year of construction: 1992, machine/vehicle number: 2355-2, Offer 24416 Technical data: - Drilling capacity into solid steel ST 60 28 mm - Drilling capacity GG 25 40 mm - Thread cutting ST 60 M 30 - Thread cutting GG 25 M 40 - Drill spindle holder MK 3 - Spindle diameter 50 mm - Quill stroke 150 mm - 18 drilling spindle speeds 45 - 2240 rpm - 4 drilling feeds 0.1 - 0.45 mm - min. / max. distance spindle - table 300 / 700 mm - Drilling radius min / max 305 / 1005 mm - Table height 820 mm - Table size 1200 x 600 mm - Drive 400 V / 6 kW Crodpfx Aqsufw S Revji - Space requirement approx. W 1300 x H 2500 x D 2300 mm - Weight approx. 1500 kg - with: - thread cutting device - hydr. columns + boom clamping - Coolant device - Vertical T-slots on the left side of the machine

Condition: used, Year of construction: 2007, bore capacity in steel (diameter) 40 mm Codpfx Aoy Nd T Hsqvjri arm length 1050 mm turning speeds 15 - 2800 U/min feed range 0,075 - 0,45 mm/min dimensions 2450 x 1300 x 2300 mm Weight 1500 kg Equipment: Machine in top condition 2026 serviced and repaired by the factory customer service Machine design - Work table 1800 x 600 mm with 4T-slots - Boom travel 1050 mm - SK 40 drilling spindle with tool clamping device - Infinitely variable speed programming - Infinitely variable quill feed via three-phase servo motor - 2 T-slots 18 mm on the machine base at the rear - 2 T-slots 18 mm on the left machine base frame - Thread cutting device - Central lubrication - Coolant device - Machine light - CE marking - Safety device - USB interface Dimensions and travels Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle bottom edge - min mm 70 Table top edge max. mm 680 Distance spindle bottom edge - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Worktable height mm 900 Cutting values Drilling capacity into solid St 60 ? 40 GG 22 ? 50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100 % ED. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 - 2000 Feed drives X-axis - AC - servo motor kW 0.25 Y-axis - AC - servo motor kW 0.25 Z-axis - AC - servo motor kW 4.50 W-axis - AC - servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7,5 / 7,5 / 5 Rapid traverse speeds (W): m/min. 3 Feed rates stepless mm/min 5 - 2000 Accuracy Positioning accuracy X-, Y-axis to 1200 mm mm ± 0.075 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC control Axes: 3 (X, Y, Z, ) Processor: 32-bit CPU Screen: TFT flat screen, backlit, easy to read from all sides readable from all sides, 215 x 160 mm Position information: Cartesian or polar, absolute or incremental measurements, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Subroutine technology: yes Standard software options: Programming in dialog, 38 zero offsets, rotation and mirroring, teach-in for X,Y,Z, restart in program with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for by manually probing the workpiece for: - any clamped rectangular parts - any clamped round parts - Mediation of cast and flame-cut parts - Angular position detection for round parts by touching reference edges or surfaces Test graphic Graphic display of drilling patterns

Condition: ready for operation (used), High-speed radial drilling machine, MK 2 Speed infinitely adjustable Crsdpfoz D D I Ijx Aqvji Drilling head electrically adjustable