Rapid Radial Drilling Machine

DONAU DR 32

Condition: refurbished (used), Year of construction: 1991, Work table 750 mm x 1200 mm Outrigger travel distance 1000 mm Tool holder MK 4 Drilling capacity 32 mm in steel Threading device Coolant system Hnsdpfx Abjz S Tzzjkju Documentation

Year of construction: 2020, condition: as good as new (ex-display), electrode diameter 0,5 to 3mm travels 300x400x350mm ) CE-cretification verifies the best possible safty all Machines in over-floor construction Elektrode Ø 0,5-3mm Travel X-Axis 300mm Travel Y-Axis 400mm Travel Z-Axis 350mm Travel W-Axis 300mm Speed W Axis 30-60mm/min Rapid feed Z-Axis 120mm/min removal rate (max.) 300:1 Hsdpfx Aef Hmn Ajbkjnu Table dimension 320x440mm max.generator capacity 30A

Condition: used, Year of construction: 1989, bore capacity in steel (diameter) 32 mm arm length 1230 mm table surface area 1200 x 500 mm bore stroke 180 mm feed - independent 0,10 - 0,15 - 0,20 - 0,30 mm turning speeds 60 - 1800 U/min Hnsdpey Aa H Njfx Abksu taper MK 4 total power requirement 2,7 kW weight of the machine ca. 1,8 t dimensions of the machine ca. 2,2 x 1,8 x 2,3 m Quick radial with: - Feed - Thread cutting device

Condition: ready for operation (used), functionality: fully functional, overall weight: 1,800 kg, Spindle: MK4 Clamping area: 1200 x 500 Clamping slots: Number 3, width 18, spacing 125 Maximum drilling capacity: for St 60 steel: 32 mm at 0.2 mm/rev Hjdpezuarmofx Abkenu for GG 20 cast iron: 45 mm at 0.2 mm/rev

Condition: used, 1 used welding machine Manufacturer: Fronius Model: Synergic 3400 G/W/E Suitable for welding steel, stainless steel, and aluminium using the MIG/MAG process. Technical specifications: Max. welding current: 340 A Wire diameter: 0.8/1.0/1.2 mm possible Hnedeyl Id Topfx Abkou Connection voltage: 380 volts Duty cycle (ED) 35% at 340 A Digital display Dimensions (L x W x H): 890 x 460 x 945 mm Total weight: 139 kg

Condition: refurbished (used), Year of construction: 1983, Work table 600mm x 1200mm Arm travel 600mm Hjdsmt Ed Ropfx Abkenu Tool holder MK 4 Drilling capacity 32mm in steel Thread cutting device Coolant system Electrics 24V control voltage Emergency stop 2-channel Guard on the drill Completely overhauled 2025 12 months warranty New paint RAL 7035/7031

Condition: refurbished (used), Year of construction: 1976, Work table 500mm x 1200mm Arm travel distance 600mm Tool holder MK 4 Drilling capacity 32mm in steel Thread cutting device Coolant device Electronics 24V control voltage Hnjdswnn S Repfx Abkou Emergency stop 2-channel Safety device on the drill Completely overhauled in 2025 12 months warranty New paint RAL 7035/7031

Condition: ready for operation (used), Year of construction: 2005, Offered is a Röders RXP 500 high-precision milling machine year 2005, approx. 160763h, spindle approx. 100000h incl. HSK-25 high-frequency spindle with 50000rpm, 42-fold chain magazine, HG sensor, high-accuracy option incl. spindle cooling as well as Renishaw probe, machine weight approx. 5500kg. Viewing is possible by arrangement. Hodexyk S Iopfx Abkenu

Condition: used, Year of construction: 1990, taper MK 3 serial number 4131 throat 1000 mm documentation ja Hodezkbqvspfx Abkjnu clamping hydraulisch kW weight of the machine ca. 2,6 t

Condition: used, Year of construction: 1968, Donau high-speed radial drill type DR 32 Speed: 60 - 1800 rpm Arm reach: 600 mm Hodpfxsx Hgkvo Abksnu Base plate: 100 x 1400 x 110 mm Thread cutting device Coolant system Machine lamp Quick-change holder with inserts Machine vice

Condition: refurbished (used), Year of construction: 1997, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine design • Work table 1800 x 600 mm with 4T-slots • Boom travel 1050 mm • Drill spindle SK 40 with tool clamping device • Stepless speed programming • Stepless spindle feed via three-phase servo motor • 2 T-slots 18 mm on the machine base frame at the back • 2 T-slots 18 mm on the machine base frame on the left • Thread cutting device • Central lubrication • Coolant device • Machine light • CE marking • Safety device • USB interface Dimensions and travel paths Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Spindle stroke (Z axis) mm 200 Column stroke (W axis) mm 410 Distance from lower edge of spindle - min mm 70 Top edge of table max. mm 680 Distance from bottom edge of spindle - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Work table height mm 900 Cutting values Drilling performance into solid material St 60  40 GG 22  50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle. Speed range: min -1 15 - 2800 Torque Nm max. 250 Hedpfx Abjvv Spkekenu constant from min -1 15 – 2000 Feed drives X-axis - AC - servo motor kW 0.25 Y-axis - AC - servo motor kW 0.25 Z-axis - AC - servo motor kW 4.50 W-axis - AC - servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min. 3 Feeds continuously variable mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axis to 1200 mm mm ± 0.075 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen backlit, easy to read from all sides, 215 x 160 mm Position information: Cartesian or polar, absolute or incremental dimensions, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Sub-program technology: yes Machining cycles Standard software options: programming in dialog, 38 zero point shifts, turning and mirroring, teach-in for X, Y, Z, restart in the program with optional functions for targeted entry Zero point determination: cycles for determining zero points by manually probing the workpiece for: - any rectangular parts clamped - any round parts clamped - transfer of cast and burnt parts - angular position detection for round parts by probing reference edges or surfaces Test graphics Graphic display of drilling patterns Data interfaces USB

Condition: refurbished (used), Year of construction: 1980, Worktable 500mm x 1200mm Arm travel 600mm Tool holder MK 4 Hodpfxox N Ih Io Abkjnu Drilling capacity 32mm in steel Thread cutting device Coolant system Safety device at the drill Completely overhauled in 2026