Used Document Finisher for sale (11,161)

Condition: refurbished (used), functionality: fully functional, FREWITT MG-803 OSCILLATING SCREENING MILL / GRANULATING MACHINE Completely overhauled in 2026 – Pharmaceutical version – comprehensively documented CONDITION Used Frewitt MG-803 in exceptionally good, fully overhauled condition. As part of a comprehensive mechanical and electrical general overhaul, the machine was completely disassembled, cleaned, technically refurbished, and professionally reassembled in 2026. The entire overhaul is detailed in a 101-page overhaul report with numerous photos, drawings, spare parts lists, and work steps. APPLICATION Oscillating screening and granulating machine for applications, in particular, in the pharmaceutical, chemical, and food industries. Stainless steel version with professionally refurbished product-contact surfaces for high hygienic requirements. COMPLETE OVERHAUL 2026 The following work was carried out as part of the overhaul, among other things: - Complete disassembly of the machine - Overhaul of fixed and moving bearing heads - Refurbishment of the connecting rod drive and guide units - Ultrasonic cleaning and refurbishment of the components - All deep groove ball bearings, cylindrical roller bearings, and linear bearings replaced - All radial shaft seals and Garlock seals replaced - Joint screws newly manufactured from stainless steel 1.4305 - Electric motor and gearbox completely overhauled by a specialist company - New bearings and seals in the drive - Drive components sandblasted and protected with a protective coating - New conductive and lockable swivel casters - Safety device of the machine door overhauled - Complete reassembly and final function test PHARMACEUTICAL SURFACE FINISH All product-contact stainless steel surfaces were professionally ground and polished by a specialized company. Surface roughness of product-contact surfaces: Ra ≤ 0.8 µm Nwsdjzu Tu Ispfx Akien TECHNICAL DATA Manufacturer: Frewitt Model: MG-803 Year of manufacture: 1997 Machine type: Oscillating screening/granulating machine Version: Pharmaceutical/stainless steel version Installation: mobile Product-contact surfaces: Ra ≤ 0.8 µm Complete overhaul: 2026 SCOPE OF DELIVERY - Frewitt MG-803 - Stainless steel feed hopper - Stainless steel discharge hopper - Rotor - Screening unit / sieve basket with lateral guide rails - Extensive selection of various sieve inserts - Complete drive and connecting rod system - Protective cover and safety sensors - Mobile stainless steel frame with new conductive, lockable rollers FUNCTION TEST After the complete overhaul, the machine was completely assembled and subjected to a function test. The MG-803 runs very smoothly and vibration-free and is ready for immediate use. DOCUMENTATION Extensive documentation available: - Original operating instructions - Technical drawings - Parts lists - Electrical documents - Maintenance and conformity documents - 101-page overhaul report of the complete overhaul in 2026 with extensive photo and work documentation INSPECTION / TEST RUN Inspection and test run possible by appointment. Subject to prior sale and errors.

Condition: reconditioned (used), Year of construction: 2006, year of last overhaul: 2026, ⚙️ STUDER S30-1 CE – High-precision cylindrical grinding machine | Complete retrofit We offer a STUDER S30-1 CE for high-precision external and internal cylindrical grinding operations. The machine has undergone a complete retrofit by MIRA Retrofit, including the inspection and refurbishment of its main components, as well as a careful adjustment and fine-tuning process. Nedpjzuzylsfx Akiewn The result is a machine that is ready for operation, with a high level of precision, reliability, and stability, and performance comparable to that of a new machine. Key specifications: 🔹 Distance between centers: 650 mm 🔹 Height between centers: 175 mm 🔹 Grinding: external and internal 🔹 Condition: complete retrofit – ready for operation 🔧 Inspection and fine-tuning All components have been carefully inspected and adjusted to ensure high geometric accuracy and reliable, stable operation. 📸 Photographs of our finished machine. 🚚 Available for immediate delivery. For more information, technical documentation, pricing, or any questions about the machine, please do not hesitate to contact us. MIRA Retrofit SA

Condition: ready for operation (used), Year of construction: 2022, travel distance X-axis: 240 mm, travel distance Z-axis: 430 mm, overall weight: 4,500 kg, controller manufacturer: SIEMENS, controller model: Sinumerik, number of axes: 2, This complete automated production cell includes two Hyundai HIT-200C CNC lathes and a FANUC M-20iA industrial robot with a ROBOTOWER automatic loading and unloading system. Each lathe offers a maximum turning diameter of 340 mm and a maximum turning length of 420 mm. The complete cell is designed for automated serial production, especially for larger production batches. Contact us for further details regarding this production cell. • 2 x Hyundai HIT-200C CNC Lathes • Year of manufacture: 2003 • CNC control: Siemens Sinumerik • Maximum turning diameter: 340 mm • Maximum turning length: 420 mm • X-axis travel: 240 mm • Z-axis travel: 430 mm • Spindle nose: A2-8 • Spindle bore: 80 mm • Hydraulic chuck: 10" Nodpfx Aksznm H Rjiown • Machine weight: approx. 4,500 kg each • Rigid and dimensionally stable construction • Capable of maintaining IT6 tolerance class Additional Equipment / Automation • FANUC M-20iA industrial robot, year 2014 • ROBOTOWER automatic loading and finished-part unloading station • Automatic handling of raw and finished parts • Set of robot grippers • Operating manuals • CE documentation • Complete production cell suitable for serial production, especially for batches of 500 parts or more • Robot and loading/unloading system in very good condition • LOSMA air filtration units (oil mist collectors) visible in the photos is not included in the offer Technical Specification Counter Spindle No Driven Tools No

Year of construction: 2000, condition: good (used), BOBST SP 142-CER MATIC combines die-cutting, waste stripping, and automatic blank separation in a single production process. The machine includes useful tooling and preparation equipment and underwent various technical upgrades in 2014. Machine Summary Manufacturer: BOBST Njdpfx Akszmhgceijwn Model: SP 142-CER MATIC Machine type: Automatic flatbed die cutter with stripping and blanking Year of manufacture: 2000 Modernization: Various technical upgrades carried out in 2014 Delivery terms: FCA/Germany FGT visual condition rating: 7/10 The rating is based on the currently available photographs. Final technical evaluation remains subject to inspection and production testing. Why This Machine Is Interesting The BOBST SP 142-CER MATIC is a robust industrial die-cutting solution for large-format folding carton and packaging production. Its main advantage is the integration of three production processes within one machine: · Flatbed die-cutting · Automatic waste stripping · Automatic blank separation This configuration reduces manual handling and additional production steps. Finished blanks can be separated directly during the die-cutting process, resulting in higher productivity and more efficient downstream processing. The elevated machine design provides good accessibility to the individual production sections. The included preparation table and tooling racks support organized tool storage and faster job preparation. Technical Data Maximum sheet size: 1,020 × 1,420 mm Minimum sheet size: 500 × 700 mm Maximum production speed: 6,500 sheets/cycles per hour Machine Configuration · Automatic sheet feeder · Large-format flatbed die-cutting section · Automatic waste stripping station · Upper quick-lock stripping frame · Lower quick-lock stripping frame · Upper blanking and separation station · Automatic delivery section · Pneumatic delivery rake · Elevated machine configuration · Operator platforms and access stairs · Central machine control panel · Operator monitor · Individual operating panels at the production sections · Safety guards and safety systems · CE-marked machine · Various technical upgrades carried out in 2014 Included Accessories The following equipment is included: · Preparation table for lower tools · Two storage racks for die-cutting tools · Pneumatic delivery rake · Upper and lower quick-lock frames for the stripping station · Upper blanking and separation equipment · Additional equipment according to the available retrofit documentation Existing job-specific cutting, stripping, and blanking tools are included only where expressly confirmed in the final scope.

Year of construction: 2006, condition: used, Complete Automatic PET Edible Oil Bottling and Packaging Line – 8,000 Bottles/Hour Complete fully automatic production and packaging line for filling edible oil into 1.0 L PET bottles, with a production capacity of approximately 8,000 bottles per hour. Our asking price is EUR 520,000 net, ex works Shtip, North Macedonia. The price is negotiable, and we are open to considering reasonable offers. The line covers the complete production and packaging process, from PET preforms to finished automatically palletized products. The complete line includes: SIAPI EAS 50.100/8 – PET stretch blow moulding machine, 8 cavities Bottle air conveyor and conveying system AVE Industries RVM 30/8 – filling and capping monoblock, 30 filling stations and 8 capping stations Nitrogen injection system Bottle conveyor system AVE Industries 8T H/M E1 – automatic labelling machine AVE Industries CP3-20 – automatic shrink wrapping / packaging machine with heat tunnel Conveyor systems AVE Industries PABR-80 – automatic palletizing system Nwjdpfxszmd Uij Akion Main specifications: Application: Edible oil Bottle material: PET Bottle size: 1.0 L Line production capacity: approx. 8,000 bottles/hour Main equipment year of manufacture: 2006 Fully automatic production and packaging line The equipment is offered as a complete integrated production line for PET bottle blowing, edible oil filling, capping, labelling, shrink wrapping and automatic palletizing. The complete line is currently installed, in operation and fully functional. Interested buyers can inspect the line and see it running under actual production conditions by prior arrangement. The line is located in Shtip, North Macedonia. Additional technical documentation, photographs and videos of the equipment are available upon request. The complete line is offered for sale as one unit.

Condition: excellent (used), Year of construction: 2016, I sell the 2-head roller coating machine for surface finishing at parquet production Cefla Sorbini Smart Parquett MRF/300. Year 2016. Configuration: 2-head roller coater Oil type: Oxidativ, UV, Let Oil load : 4 – 30 gr/m2 + brand new unused vacuum pump +2 pcs. new rubber cylinder +1 pc. new feeding band Nsdpfx Akozn Axcoiewn Working width: 300mm Total length: 2,30m Total width: 1,30m Weight: 960kg Available immediately. Fully working. Still in production. Possible to run and test. Documentation and CE included.

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 240 mm, travel distance Z-axis: 430 mm, overall weight: 4,500 kg, controller manufacturer: SIEMENS, controller model: Sinumerik, number of axes: 2, Horizontal turning machine manufactured in 2003. This Hyundai HIT-200C features a maximum turning diameter of 340 mm and a turning length of 420 mm. It is equipped with a Siemens Sinumerik CNC control and has an X-axis travel of 240 mm and Z-axis travel of 430 mm. If you are looking to get high-quality turning capabilities, consider the Hyundai HIT-200C machine we have for sale. Contact us for further details. Nedpszmxt Tsfx Akiown • Maximum turning diameter: 340 mm • Maximum turning length: 420 mm • Spindle nose: A2-8 • Spindle bore: 80 mm • Hydraulic chuck: 10" • Machine condition/accuracy: very rigid and dimensionally stable construction; capable of maintaining IT6 tolerance class Additional equipment • Optional automation package: • FANUC industrial robot • ROBOTOWER loading and finished-part unloading station • Set of grippers • Operating manuals • CE documentation • Note: Feeder/robot reported in very good condition; complete production cell suitable for serial production (e.g., batches of 500 parts or more) Technical Specification Counter Spindle No Driven Tools No

Condition: new, functionality: fully functional, Year of construction: 2026, container length: 20 ft, color: other, overall weight: 1,400 kg, maximum load weight: 5,000 kg, empty load weight: 1,300 kg, loading space width: 4,876 mm, loading space length: 6,058 mm, loading space height: 285 mm, Equipment: cooling unit, Double Office Container / Living Container / Welfare Container Price: 13,500 Euros net Description: OMEGA CONTAINERS has been active in the market since January 2017. We specialize in the complex production of office, welfare, living, and technical containers. We offer professional service from planning and production to transport and assembly. OMEGA containers are built on a solid steel frame, allowing the modules to be transported safely or moved with a crane without risk of damage. It is possible to transport the container multiple times. Nodpfsy Ti I Djx Akijwn If required, we also build containers with structural calculations and specified documentation, as well as technical planning. The specific standard dimensions of our container: Length: 6058mm Width: 4876mm External height: 2850mm Internal height: 2500mm We also produce custom containers that are perfectly adapted to the customer's requirements. Steel Construction: Consists of 3 mm thick open steel profiles with 5 mm thick sheet metal reinforcements. The surface is coated with an epoxy primer and painted with polyurethane paint. Color selection based on RAL color charts. Roof: It is a steel structure filled with sandwich panels with 100 mm thick PUR foam (polyurethane foam). The roof sealing consists of 1 mm thick galvanized sheet metal over the entire area. Walls: Made of sandwich panel with 100 mm PUR foam (polyurethane foam). The outer facade is made of sheet metal in silver, white or graphite. The inner facade is made of sheet metal in white. Flooring: Made of tightly welded steel profiles. The sealing consists of trapezoidal sheet metal t-14. Insulation made of 100 mm pressed wool. Floor: 25 mm OSB. Finished with an industrial PVC lining with increased abrasion resistance + cover sheet. Fittings: - 1 piece - 900mm x 2000mm sheet metal door, in white or anthracite. - 3 pieces - Window 1200mm x 1200mm tilt-and-turn window - 3 pieces - External roller shutter Electrical Installation: 2x Power distribution box - Residual current circuit breaker + fuses, residual current + fuses 2x Electrical connection 32A 5P 2x External socket 32A 5P 4x LED lamp (2x36W) 6x Double socket 2x Electric heater 2kW Additional options: - It is possible to equip the container with a toilet, shower, sink, including water connection, heating, etc. - Installation of several windows in different sizes. - Installation of glass doors. - Installation of roller shutters. - Installation of air conditioning with room heating. - Division of containers into rooms. - Connection of several containers to form a unit. We cordially invite you to contact us! Mobile: 015172275285

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, turning length: 196 mm, turning diameter over cross slide: 130 mm, spindle speed (min.): 6,000 rpm, bar diameter (max.): 36 mm, overall weight: 1,900 kg, Equipment: documentation/manual, Yamazaki Mazak QT-6T CNC Turning Center – Excellent Condition We offer for sale a well-maintained Yamazaki Mazak QT-6T CNC Turning Center, manufactured in Japan and kept in excellent mechanical and operational condition. The machine is currently under power, in production, and available for inspection and testing upon appointment. Machine Information - Manufacturer: Yamazaki Mazak - Model: Quick Turn QT-6T - Year of Manufacture: 1999 - Serial Number: 39178 - Country of Origin: Japan - CNC Control: Mazatrol - Configuration: 2-Axis CNC Turning Center (X / Z) - Machine Weight: Approx. 1,900 kg Main Features - 6" Chuck - Collet Chuck - Complete Set of Collets Included - Bar Capacity up to 36 mm - 8-Station Turret - Tool Eye (Automatic Tool Measurement System) - Automatic Parts Catcher - Coolant System - Fully Operational Included Equipment - Fedek Bar Feeder - Bar Feeder Length: 1.5 m - Pneumatic Bar Pushing System - 6" Chuck - Collet Chuck - Complete Set of Collets - Full Set of Tool Holders - Original Manuals and Documentation - Various Accessories Additional Equipment Included The machine is supplied with the complete set of spindle protection plastic tubes (bar guide tubes), allowing safe operation with bar stock and minimizing vibration, noise, and bar whipping during spindle rotation. This contributes significantly to machining stability, surface finish quality, and spindle protection when running long bars. Technical Specifications - Maximum Turning Diameter: Approx. 130 mm - Maximum Turning Length: Approx. 196 mm - Spindle Bore: Approx. 45 mm - Maximum Spindle Speed: Up to 7,000 rpm - Bar Capacity: 32–36 mm - X-Axis Travel: Approx. 80 mm - Z-Axis Travel: Approx. 200 mm - Rapid Traverse X/Z: Up to 30 m/min Condition ✔ Excellent mechanical condition ✔ Regularly maintained ✔ Machine under power ✔ Ready for immediate production ✔ Inspection and test run possible ✔ All manuals and documentation available Additional Information This machine is offered as a complete production package and is ideal for precision machining of bar stock, small and medium batch production, and high-accuracy turning applications. The machine comes with extensive tooling, collets, holders, automatic tool setting, automatic parts catcher, bar feeder, and spindle guide tube system, allowing immediate integration into production with minimal additional investment. Njdpfx Akezal Raoijwn Loading assistance is available. Videos of the machine running can be provided upon request.

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: 060308, functionality: fully functional, power: 6.9 kW (9.38 HP), input voltage: 400 V, input current: 19 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 40 °C, number of chambers: 1, control type: PLC-controlled, Equipment: CE marking, documentation/manual, GIARDINA MOS® 3D Static Microwave Drying Chamber Professional static drying system designed for the drying of coated wooden components, particularly for water-based coatings. Nwedpfx Akjztvf Tjion The GIARDINA MOS® 3D technology uses microwave energy for controlled and homogeneous three-dimensional drying. After removal of the water component from the coating, a low-temperature hot-air circulation phase completes the drying and curing process. The system is suitable for three-dimensional and assembled wooden components, including furniture, chairs, window and door components, profiles and turned parts. Technical data: Manufacturer: GIARDINA FINISHING S.r.l. Model: MOS® 3D Year of manufacture: 2006 Serial number: 060308 Electrical power: 6.9 kW Supply voltage: 400 V Frequency: 50 Hz Rated current: 19 A PLC controlled Air recirculation motor: 3 kW / 4 HP CE marked Original operating and maintenance documentation as well as electrical diagrams are available. The machine was recently taken out of production and is currently dismantled and stored in a dry warehouse. It was in regular operation prior to being taken out of service.

Condition: used, Year of construction: 2005, functionality: fully functional, RAKO 12-Jaw Precision Clamping System Ø 1,600 mm with Extensive Jaw Set (2 units in stock) Manufacturer: RAKO GmbH, Gelenau Manufacturer's designation: 12-Jaw Chuck Year of manufacture: 2005 Documentation date: 2006 Drawing number: 0684.00-00 Article number: MPT-1023 / 1024 Offered is a used, stationary RAKO 12-jaw precision clamping system for mounting on a fixed machine table. The clamping system was used for machining brass cages for ball and roller bearings. It is not a conventional turning chuck for a machine spindle, but rather a permanently mounted workpiece clamping device. The design features twelve basic jaws arranged radially and evenly around the circumference. This distributes the clamping force over numerous contact points. This clamping principle is particularly suitable for large, ring-shaped, thin-walled, sensitive, or easily deformable workpieces. According to the existing manufacturer's drawings, different jaw positions are possible for internal and external clamping. The clamping system has an outer diameter of approximately 1,600 mm and a weight of approximately 2,000 kg. Scope of delivery - RAKO 12-jaw clamping system, Ø approx. 1,600 mm - twelve radially arranged basic jaws - extensive set of various clamping and adapter jaws - different interchangeable and clamping elements - additional fastening and accessory parts as shown in the images - separate wooden crate with jaws and accessories - original RAKO operating manual - overall, section, and detail drawings - drawings of various clamping positions The exact quantity and assignment of all jaws and accessories have not been finally determined. The scope of delivery is based on the images. Condition Used condition with signs of wear and tear due to age and use. Scratches, dirt, discoloration, and, in some places, slight surface rust or corrosion can be seen on the clamping system and individual accessories. Nwsdozx D A Dopfx Akisn Technical data - Outer diameter: approx. 1,600 mm - Weight: approx. 2,000 kg - Number of basic jaws: twelve - Jaw arrangement: radial and even - Clamping options: internal and external clamping - Jaw stroke: 28 mm according to drawing - Total clamping force: approx. 190 daN at 35 Nm actuating torque - Maximum torque on the actuating spindle: 100 Nm - Locking air: present - Maximum locking air pressure: 5 bar - Lubrication: on the twelve basic jaws and the actuating spindle - Transport: three threaded holes M30 for crane screws Mounting on the machine table According to the RAKO operating manual, mounting is done with 14 cylinder head screws M20 × 180 according to DIN 912, strength class 10.9. The specified tightening torque is 300 Nm. Jaws and accessories The scope of delivery includes an extensive range of different clamping and adapter jaws. Documented, among other things, is an adapter jaw H41 with drawing number 0721.02-03 and a finished size of 55 × 50 × 46 mm. Dimensions of clamping system: approx. 1,600 × 1,600 mm Height: to be determined Weight: approx. 2,000 kg Total shipping weight: over 2,000 kg plus accessories and packaging

Condition: used, Year of construction: 2012, stations 20 0 Nedpfx Akjzgxbkeiewn max. speed sets 4200 /h max. paper size 36 x 50 cm 1 tower DC-10/60 Pro built 2012 à 10 Stationen 1 tower DC-10/60 built 2002 incl. DBM 400 fold and stitiching unit (Hohner stitching heads) incl. DBM 400T Trimmer incl. DBM-400 LS (Long Stacker) optional DBM- 2KT (3-knife trimmer)

Condition: new, maximum load weight: 30,649 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 7,500 mm, loading space width: 2,440 mm, loading space height: 1,500 mm, loading space volume: 27 m³, total width: 2,550 mm, Year of construction: 2026, Equipment: ABS, Schmitz Cargobull SKI 24 SL 7.2 | 3-Axle Tipper Semi-Trailer | Aluminium Box Body 27 m³ Technical Data: Permissible total weight: 36,000 kg (technically 39,000 kg) * Unladen weight: approx. 5,351 kg (+/- 3%) * Volume: approx. 27.2 m³ * Internal body length: approx. 7,500 mm * Internal body width: approx. 2,440 mm * Side wall height: approx. 1,500 mm * Fifth wheel load: 12,000 kg * Axle load: 24,000 kg * Tyres: 6x 385/65 R22.5 on steel rims Chassis & Body: Weight-optimized frame with new design * Standard 7.2 frame made of high-tensile steel, welded Nedpfxoy Iii Rj Akiswn * Foldable underride guard, suitable for road finisher * 2" king pin according to SAE standard, exchangeable * Side impact protection in Schmitz Granite * Plastic mudguards with separate lamp bracket * Mud flaps with Schmitz logo Axles & Suspension: 3 x SCB 9 t ROTOS axles, disc brakes Ø 430 mm * Automatic/pneumatic axle lift on 1st axle with start assist * Air suspension SCB MRH4-KU35 Hydraulics: HYVA hydraulic cylinder 170–250 bar (low and high pressure operation) * Smallest stage hard-chromed * Hydraulic hose with screw coupling (1” female thread, max. 250 bar) * Bracket and parking position at working platform Braking System: Two-line compressed air system with standard couplings * EBS 2S/2M including stability program * Steel air tank * Double-diaphragm spring brake cylinder * Lift and lowering device with auto-reset function * Load pressure gauge Electronics & Safety: EBS power supply via ISO 7638 + CAN * Automatic lowering during tipping * 2 wheel chocks with holder TrailerConnect®: TrailerConnect control unit CTU incl. battery * CTU module 1 (position & technical data, 12 months) * Data storage (12 months) * Tyre pressure monitoring system Lighting: 24V lighting system with multi-chamber lights * 2x 7-pin sockets + 1x 15-pin socket * LED side marker lights with indicator function * White front position lights * 2 LED reversing lights at rear * LED lane marker lights Body & Superstructure: Aluminium box body 7,500 mm, height 1,500 mm, internal wall thickness 3.5 mm * Aluminium floor: rear 8 mm / front 7 mm * Front wall inclined 20°, with sturdy supports for front tipping cylinder * Working platform with access at front left and ladder for body entry * Rear wall flap made of aluminium, inclined, with all-round sealing * 4 mechanical hook locks, including additional tension fasteners * Centrally mounted grain chute with cover * Reinforced rear end Tarp & Spriegel: PVC roll-top cover silver (RAL 9006) with side stops * Straight cover frame with swivelling/removable crossbows * Tarp operating rod (short version) Paintwork: Tipper body: Light grey RAL 7035 * Chassis: Nova Grey * Wheels: Silver RAL 9006 * Wheel hubs: Black, KTL-coated * Conspicuity markings in red (rear) and white (sides) Registration: Vehicle with German documents * EC type approval including CoC * A-sign for waste transport For further information, please feel free to contact us.

Condition: excellent (used), grinding wheel diameter: 508 mm, grinding length: 3,500 mm, overall weight: 8,000 kg, power of the servo motor: 42,000 W, year of last overhaul: 2010, Equipment: rotational speed infinitely variable, We are selling our own Lidköing 4B centerless grinding machine with circulation station from our subsidiary in Slovakia. The machine is powered and can be inspected. The circulation station is suitable for shafts up to a length of approx. 3,000 mm. This means that shafts with multiple grindings can be continuously finished. The coolant system has a cooling system for tempering the coolant. The Lidköping 4b grinding machine has an adjustable grinding and regulating wheel. The machine is from 1970 and was completely overhauled technically and electrically at Markmetall in 2010. The grinding machine was rebuilt in 2018 with a newly built circulation station from SH attachments/Markmetall. Since then, the machine can be operated as an automatic centerless grinding machine. Extensive documents are available. Nwodjvuq Hxepfx Akion

Condition: new, Year of construction: 2026, 540×250 Surface Grinder (MYS1022) is a compact machine designed for precision grinding of small and medium-sized metal components. Its robust construction and advanced technologies ensure high machining accuracy and reliable operation in demanding industrial environments. Main advantages of the 540×250 (MYS1022) surface grinder The 540×250 (MYS1022) magnetic surface grinder is an ideal solution for industrial facilities requiring precise machining in a compact format. Designed for professional users, it combines advanced technologies such as hydraulic feed in two axes and precision guideways with a solid construction, ensuring reliability and high machining efficiency. Its compact dimensions and high accuracy make it an excellent choice for smaller workshops and production facilities where space is limited. Key benefits include: High grinding precision – maximum grinding area of 540 × 240 mm and transverse feed accuracy of 0.02 mm ensure excellent surface finishing quality. Compact construction – dimensions of 1800 × 1400 × 1800 mm and a weight of 900 kg allow easy installation in smaller production facilities. Smooth hydraulic feed system – two-axis feed system enables precise movements with transverse speed up to 600 mm/min, ensuring efficient machining. Stability and durability – robust construction with double guideways minimizes vibrations, guaranteeing stable operation during intensive use. Easy maintenance – centralized guideway lubrication reduces manual maintenance requirements and increases machine availability. Ready for operation – the machine is fully equipped for immediate production, minimizing setup and downtime. Machine design and technology Robust construction and precision components The MYS1022 surface grinder features a heavy-duty construction weighing approximately 1000 kg, providing excellent stability during machining operations. Hardened and ground linear guideways eliminate vibrations, ensuring smooth table movement and high-quality surface finishes. The spindle, driven by a 1.5 kW motor, operates with a grinding wheel measuring 200 × 20 × 32 mm, enabling efficient processing of various metal materials. Technical specifications Parameter Value Table dimensions 500 × 250 mm Longitudinal / transverse travel 560 × 260 mm Maximum grinding area 540 × 240 mm Maximum distance from table to spindle centerline 490 mm Table guideways Double guideway Transverse movement per vernier scale division 0.02 mm Transverse movement per handwheel revolution 2.5 mm Vertical movement per vernier scale division 0.01 mm Manual vertical movement per handwheel revolution 1.25 mm Grinding wheel dimensions 200 × 20 × 32 mm Grinding wheel speed 2850 rpm Main motor power 1.5 kW Hydraulic oil tank capacity 80 L Hydraulic pump motor power 1.5 kW Coolant pump motor power 40 W Machine dimensions 1800 × 1400 × 1800 mm Weight 1000 kg Standard equipment Magnetic table Grinding wheel Nwedpfxekkcm Uj Akion Grinding wheel holder Cooling system Chip separator with magnetic filter Halogen lighting system Technical documentation (DTR) CE declaration

Condition: good (used), Frampton FR1-3 Flash roaster Stainless flash roaster, used when pre cooked meats need to have a roast finish, allows products such as hams to be roasted in under 3mins and still cool enough to be packed, ideal for meats, fish, veg and more, belt dimensions 2100mm x 140mm, variable speed, adjustable temp control, mobile, 3Ph Njdjlt T T Ispfx Akiswn

Condition: used, functionality: fully functional, - Polish production - DTR (Technical Documentation / Operation Manual) - Maximum length of processed material: 2800 mm TECHNICAL PARAMETERS: - Minimum length of cut prism: 600 mm - Maximum thickness of cut prism: 110 mm - Maximum width of input material: 450 mm - Maximum width of finished board: 150 mm - Minimum width of finished board: 70 mm - Saw blade diameter: 400 mm Nedpfx Aksq Rc Rloiewn - Output capacity up to: 20 m³ - Power of right vertical spindle motor: 3.5 kW - Power of left vertical spindle motor: 3.5 kW - Rotational speed of vertical saw drive motors: 2850 rpm - Power of horizontal saw motor: 22 kW - Rotational speed of horizontal saw drive motor: 2850 rpm - Rotational speed of feed drive motor: 1450 rpm - Feed speed (stepless adjustment): 0 - 20 m/min - Supply voltage (50 Hz): 3×400 V - Machine dimensions (L/W/H): 7250 / 1700 / 1600 mm - Transport dimensions (L/W/H): 4700 / 2400 / 1600 mm - Machine weight: 1300 kg

Year of construction: 1993, condition: good (used), machine/vehicle number: 01024, 1 x AC 8000-S: 1 Collator (8 Stations) Stitching and Folding Unit SPF-10 Nedpsfx Sqvofx Akiewn Front Trimmer FC-10

Condition: excellent (used), functionality: fully functional, gearing type: hydrostat, fuel type: diesel, color: orange, overall weight: 7,200 kg, empty load weight: 7,200 kg, operation weight: 7,400 kg, tire condition: 80 %, axle configuration: 6x2, number of seats: 2, first registration: 12/2014, shovel volume: 3.8 m³, suspension: air, Year of construction: 2014, operating hours: 6,100 h, Equipment: adjustable chassis, hydraulics, WE HAVE THREE CATERPILLAR ASPHALT PAVERS IN STOCK: TWO ORANGE AND ONE YELLOW. The following offer applies to a 2014 Caterpillar AP300D with 6,100 operating hours, equipped with an AS3173 working table. For sale is a professional asphalt paver designed for the construction and renovation of surfaces in small and medium-sized road projects. Its compact dimensions, hydrostatic drive, and hydraulically adjustable working width make it suitable for use in urban areas, on local roads, in parking lots, and on bicycle paths. MACHINE SPECIFICATIONS • Manufacturer: Caterpillar Njdpfx Asz I Srcskijwn • Model: AP300D • Year of manufacture: 2014 • Operating hours: 6,100 hours • VIN/PIN: CATAP300JTEN00136 • Chassis: wheeled • Working table: Caterpillar AS3173 • Table serial number: DLC00589 • Weight as indicated on the manufacturer’s plate: 7,400 kg • Maximum permissible total weight: 7,750 kg • Country of manufacture: Italy CATERPILLAR C4.4 ENGINE The four-cylinder Caterpillar C4.4 ACERT diesel engine with a displacement of 4.4 liters provides power to the machine's drive and working units. • Gross power: 55.5 kW / approximately 75 hp • Net power according to model documentation: 50.9 kW / approximately 69 hp • Rated engine speed: 2,200 rpm • Fuel tank capacity: 110 liters • Hydrostatic drive system • Catalog travel speed: up to 16 km/h • Catalog paving speed: up to 30 m/min Smooth speed control allows the work rate to be adjusted to the supply of the mixture and the conditions on the construction site. Paving, travel, and maneuvering modes facilitate operation during surfacing and machine movement. AS3173 WORKING TABLE — WORKING WIDTH 1.70–3.20 M The mounted Caterpillar AS3173 table allows for hydraulically adjustable paving width in the basic range of 1.70 to 3.20 m. Model expansion options: • Width up to 4.00 m after mounting additional extensions • Width from 0.65 m with an appropriate reduction attachment • Catalog cross-profile adjustment of the table: from -2.5% to +4.5% The AS3173 design includes electric heating of the working plates and a vibration system. The table forms the surface and provides preliminary compaction of the mixture before final compaction with a roller. MIX FEEDING SYSTEM The AP300D model has a front hopper with a catalog capacity of approximately 3.8 m³. The mixture delivered by the truck is transported by conveyors to the rear of the machine and then distributed by screws in front of the working table. Independent control of the conveyors and screws allows the material feed to be adjusted to the working width and rate. The ability to change the direction of their operation facilitates control of the mixture when finishing the working strip. The stated price is net and applies to export and for companies. A significant discount is possible for individual customers. We invite you to contact us directly by phone to get your best price.

Condition: new, Year of construction: 2026, 270 L COMPRESSED AIR TANK – HIGH-QUALITY PRESSURE VESSEL FOR COMPRESSED AIR SYSTEMS Key Features of the 270 L Pressure Vessel Professional Pressure Design – made of high-grade 4 mm thick steel, resistant to pressure and corrosion. UDT Certification and CE Marking – compliance with European safety and quality standards. Working Pressure of 11 bar – suitable for most pneumatic systems, including those with higher demands. Large Capacity – 270 Litres – ensures stable air supply and reduces compressor start-stop frequency. Multi-connection System – 5 connection ports with diameters of 1", 2", and 1/2" allow flexible integration with various installations. High-Quality Finish – durable anti-corrosion coating inside and outside the tank. Nwjdpfoxbzalox Akijn Universal Mounting Position – vertical design saves space in industrial environments. Construction and Technology – Robust Design for Demanding Applications This compressed air tank is engineered for heavy-duty use in industrial settings. The body is made from 4 mm thick structural steel, ensuring resistance to pressures up to 11 bar and enabling long-term operation. All welds undergo strict quality control, and the tank surfaces are protected with a corrosion-resistant coating that withstands chemical and atmospheric factors. The tank includes a nameplate with the CE mark and the notified body number of UDT, confirming its approval for use in the Polish and European markets. The set comes with complete technical documentation, a pressure vessel passport, and material certificates. Standard Equipment Connection Ports: 5 pcs – diameters: 1", 2", 1/2" Nameplate with CE Mark UDT Notified Body Number Complete Technical Documentation and Pressure Vessel Passport Internal and External Anti-Corrosion Coating

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, paper weight (max.): 208 g/m², paper width (max.): 350 mm, paper height (max.): 500 mm, production capacity: 4,500 unit/h, No minimum price – guaranteed sale to the highest bidder! Auction of a brochure production line! TECHNICAL DETAILS Gathering towers Models: Horizon VAC-100a / VAC-100m Number of towers: 2 Stations per tower: 10 Feeder system: Air suction feeder Voltage: 230 V Frequency: 50 Hz Current draw: 10.4 A per section Booklet making and folding module Model: Horizon SPF-200A Voltage: 230 V Frequency: 50/60 Hz Current draw: 3.4 / 3.2 A Booklet making heads: 2 Brochure thickness: up to 4.5 mm Functions: Wire stitching and center folding Front trimmer Nwsdpfx Akszy Hhxjien Model: Horizon FC-200A Function: Automatic front trimming Operating mode: Inline operation with Horizon SPF-200A Cutting quality: High-precision cut Stacking unit Model: Horizon ST-40 Voltage: 230 V Frequency: 50 Hz Current draw: 4.7 A Function: Automatic stacking of finished brochures Production capacity: max. 4,500 brochures/h Feeder stations: 10, expandable to max. 60 Sheet format max.: approx. 350 × 500 mm Paper weight: 52–208 g/m² Booklet thickness: max. 2 mm for saddle stitching Processing: Gathering, stitching, folding, and stacking in one system MACHINE DETAILS Production counter: approx. 1,800,000 brochures EQUIPMENT Horizon VAC-100a gathering tower Horizon VAC-100m gathering tower Horizon SPF-200A booklet making and folding module Horizon FC-200A front trimmer Horizon ST-40 stacking unit Data sheets for the individual components of the system, including further detailed technical data, can be found in the appendix.

Year of construction: 2015, condition: excellent (used), Ref: 11161 . 2015 Pack-Smart IPF 30-27-4 Integrated Finishing System Ideal for direct mail, gift card and security packaging, media packaging, tipping, windowing, folding, gluing and other specialist print-finishing applications. Equipped with: Rotary vacuum paper feeder Precision product alignment & registration Dual servo-driven vacuum transport conveyors Twin-head hot melt glue system Servo-driven cold glue pattern system Scoring / perforating module Front fold tooling 3 x plow fold stations Turnover / straight-through module Transfer conveyor Shingled delivery conveyor 10-axis servo control system 10" colour touchscreen HMI Recipe storage & recall Integrated vacuum system Interlocked safety guarding Specification: Maximum production speed: 12,000 products per hour Maximum conveyor speed: 122 m/min Carrier size: 102–762 mm wide x 102–813 mm long Stock: 145 gsm up to 0.86 mm thickness Njdpfez Iz Sfsx Akiewn Secondary rotary pick & place feeder Secondary product size: 54 x 54 mm to 150 x 150 mm Secondary feeder speed: up to 500 products/min Electrical: 230V / 3Ph Air requirement: 4.1–7 bar

Condition: excellent (used), Year of construction: 2020, Ref:11151 . 2020 Horizon HT-300 iCE Trimmer LIKE NEW - ONLY 980 BOOKS TRIMMED! For fully automatic three knife trimming of piled or single bound books off-line. Quick, menu guided set-up, LCD on-screen instructions for lower skilled operation. Designed for either offline operation or inline connection to Horizon perfect binders. Comprising: Stacker infeed to integral register table Digital control panel with LCD monitor for size setting and fault indication Hydraulic clamping keeps the book/pile firmly in position Diagonal cutting action for a precise finish of all three sides Corner trimming capability Including knives, tools and accessories. Specification: Nwedjz Elvpjpfx Akijn Maximum speed: 300 cycles/hour Stack production: Up to approx. 590 books/hour depending on feed/configuration Maximum untrimmed size: Up to 350 × 350 mm, depending on table/configuration Minimum untrimmed size: Down to 152 × 107 mm with A6 Table K Maximum trim width: 99.9 mm Minimum trim width: 2 mm (0 mm/no cut can also be selected) Book/stack thickness: 1–51 mm Pressing force: 1–7 kN, servo controlled Machine dimensions : Approx. 2,406 × 1,280 × 1,550 mm W × D × H Operation: Fully automatic setup Workflow: iCE LiNK / JDF compatible

Condition: reconditioned (used), Year of construction: 2018, machine/vehicle number: 0-261-71-2124, functionality: fully functional, total length: 6,075 mm, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, The edger, after a complete overhaul, will be available at the end of October. TECHNICAL DATA: Element feeding and removal ■ Pressure beam with pressure belt Nwsdpfxoz A Tf Te Akijn ■ Prepared for connection to a return system ■ Variable feed rate: 8-18 m/min ■ Automatically adjustable alignment guide, height of the pressure beam, and pressure zone Edge banding ■ QA65 glue pot ■ EVA preheating unit, 8 kg/h Element finishing ■ Anti-adhesive and cleaning fluid ■ Corner rounding unit with a double profile FLEXTRIM ■ Trimming unit ■ Multifunctional profile sanding unit with R-2 and R-1 tools ■ Edge milling unit with R-2 and R-1 tools ■ Flat sanding, upper and lower polishing unit Documentation ■ Selected languages: Croatian, German, English ■ Format: Data carrier + paper documentation General information ■ Control system: HOMAG POWERTOUCH control system ■ CE marking: YES ■ Operating condition: Ready for operation ■ Machine length: 6075 mm ■ Year: 2018 ■ Number of processed meters: 2.5 million/m

Condition: not inspected (used), Year of construction: 2016, functionality: unexamined, edge thickness (max.): 22 mm, rotational speed (max.): 12,000 rpm, Equipment: CE marking, The machine has the following configuration: Pre-milling unit Automatic, timer-controlled intervention and positioning via NC Edge preheating lamps Edge band magazine Glue pot for EVA hot-melt adhesive Premelter for EVA hot-melt adhesive QM-705 End trimming unit IN-801 Number of motors: 2 Top and bottom flush trimming unit RS-100 Number of motors: 2 Motor power: 2 kW Speed: 12,000 rpm Fine finishing and contour trimming unit RF-100 Number of motors: 2 Motor power: 2 kW Speed: 12,000 rpm Corner rounding unit AR30 Number of motors: 2 Nwedpfxsyxndbe Akijn Motor power: 0.8 kW Speed: 12,000 rpm Automatic, timer-controlled intervention End cutting unit RB02 Positioning by NC Glue scraping unit RCC-701 Polishing unit SP-501 Number of motors: 2 Motor power: 0.25 kW Spraying unit LPT-700 TECHNICAL DETAILS Panel height min: 10 mm Panel height max.: 60 mm Edge thickness min.: 0.4 mm Edge thickness max.: 22 mm MACHINE DETAILS Total connected load: 22 kW EQUIPMENT Feed pressure with rubber belt Panel support guides with NC positioning CE marking The machine is sold and delivered as is (“as seen and approved”) based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the place of destination. External reference: 7673