Used Document Finisher for sale (10,858)

Condition: not inspected (used), Year of construction: 2016, functionality: unexamined, edge thickness (max.): 22 mm, rotational speed (max.): 12,000 rpm, Equipment: CE marking, The machine has the following configuration: Pre-milling unit Automatic, timer-controlled intervention and positioning via NC Edge preheating lamps Edge band magazine Glue pot for EVA hot-melt adhesive Premelter for EVA hot-melt adhesive QM-705 End trimming unit IN-801 Number of motors: 2 Top and bottom flush trimming unit RS-100 Number of motors: 2 Bodsyxndbopfx Afmjlp Motor power: 2 kW Speed: 12,000 rpm Fine finishing and contour trimming unit RF-100 Number of motors: 2 Motor power: 2 kW Speed: 12,000 rpm Corner rounding unit AR30 Number of motors: 2 Motor power: 0.8 kW Speed: 12,000 rpm Automatic, timer-controlled intervention End cutting unit RB02 Positioning by NC Glue scraping unit RCC-701 Polishing unit SP-501 Number of motors: 2 Motor power: 0.25 kW Spraying unit LPT-700 TECHNICAL DETAILS Panel height min: 10 mm Panel height max.: 60 mm Edge thickness min.: 0.4 mm Edge thickness max.: 22 mm MACHINE DETAILS Total connected load: 22 kW EQUIPMENT Feed pressure with rubber belt Panel support guides with NC positioning CE marking The machine is sold and delivered as is (“as seen and approved”) based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the place of destination. External reference: 7673

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, We offer a Günther injector for meat, fish, and cheese, type PIH57M from 2017 – a compact, automatic machine for injecting brine and marinade with a capacity of 30 l/min. The device has been designed for the processing of meat, poultry, fish, and cheese, where even distribution of brine, improvement of taste and color, and increased yield of the finished product are important. The PIH series is specially designed for the requirements of poultry and fish injection, with a high needle density for the best possible distribution of brine in the product. Bjdpfoyibhqox Afmjlp The Günther PIH57M injector operates at 400 V, 1.6 A, 50 Hz, requires 6 bar compressed air and provides a capacity of up to 30 l/min with an installed power of 2 kW. The set includes a brine filter, documentation and spare parts, which facilitates quick implementation of the machine into production and subsequent servicing. Technical data: Manufacturer: Günther Maschinenbau GmbH Type/model: PIH57M Year of manufacture: 2017 Application: injection of meat, poultry, fish, cheese Power supply: 400 V, 50 Hz Current: 1.6 A Operating pressure: 6 bar Capacity: up to 2000 kg/h Number of needles: 57 Needle diameter: 3 mm Maximum product height: 150 mm Working width: 280 mm Power: 2 kW Equipment: filter, documentation, spare parts Machine dimensions: L: 1800 x W: 800 x H: 2500 mm Their outstanding features are: Rugged construction Compact design High injection accuracy Easy operation Easy to maintain High flexibility Easy to clean

Condition: used, Year of construction: 2010, machine/vehicle number: CA38, Technical Specifications & Performance Data The Used Capsuling Machine Robino & Galandrino MONOSTADIO FT6 is a high-precision rotary capsuler designed for PVC capsule application on sparkling wine formats. Engineered for reliable operation in demanding beverage production environments, this second hand unit combines throughput with precise capsule placement for professional finishes on glass bottles. Manufacturer / Model: Robino & Galandrino MONOSTADIO FT6 Year of manufacture: 2010 Machine category: Capsuling machine (PVC capsules) Production speed: up to 7,000 bottles/hour (format-dependent) No. of heads: 6-head rotary carousel for continuous operation Container type: Glass bottles Bottle format: 0.75 L (typical sparkling wine “Spumante” format) Product type focus: Spumante and sparkling-style wine applications Safety: Safety features included (guarding and interlocked access) Condition: In storage, second hand Advanced Automation & Control Systems Designed for dependable industrial packaging, the MONOSTADIO FT6 features automated operations to stabilize high-speed cycles and ensure capsule placement quality. The control system supports precise synchronization with upstream and downstream modules on a used bottling line. Operator control panel for speed setting, fault diagnostics, and production counters Bottle presence and spacing sensors to prevent misfeeds and reduce stoppages Automatic cycle controls for consistent capsule distribution and finishing Interlocked guards with emergency stop circuits for safe intervention Electrical design suited to modern beverage production environments (details available on request) Production Line Integration Capabilities This capsuling machine integrates seamlessly into complete wine lines, positioned after corking and wire-hooding and before labeling. Mechanical and electrical interfaces allow smooth communication with typical line components such as rinsing, filling, capping/corking, wire-hooding, labeling, and packing equipment. Compatible with upstream rinsing and filling, and downstream labeling and case packing Synchronizable with conveyor drives and starwheels for stable bottle handling Bljdpsyhbzqefx Afmsp Configured for 0.75 L glass; additional format parts may extend flexibility depending on availability Can be part of mixed-material plants where other stations handle PET or aluminum containers Machine Condition & Maintenance History The unit is currently in storage with safety features included. As a second hand equipment asset from a professional wine packaging environment, it presents a solid base for reliable service within a used bottling line. Visual inspection, documentation, and available change parts can be discussed to align with specific project requirements. Operational Performance & Versatility Optimized for Spumante and premium wine presentations, the MONOSTADIO FT6 delivers uniform capsule application at high speed, preserving label panels and ensuring an even, aesthetically pleasing finish. Six sync...

Condition: excellent (used), Xerox Versant 4100 Including: Fiery EX 4100 1 x OHCF (Optional Handling and Finishing) FIM (Feeder and Inserter Module) C/Z fold unit Booklet maker Blsdpfsychr Eox Afmsp The machine is in perfect working order!

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 400 kg, travel distance X-axis: 440 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, total height: 1,700 mm, total length: 1,650 mm, total width: 1,150 mm, wire diameter (max.): 0.25 mm, workpiece height (max.): 400 mm, table width: 380 mm, overall weight: 1,150 kg, table length: 650 mm, empty load weight: 1,150 kg, warranty duration: 12 months, input voltage: 400 V, Equipment: cooling unit, documentation/manual, Special Offer – 5% Discount Available! EDM32 Wire EDM Machine The EDM32 Wire Electrical Discharge Machine is a precision CNC machine designed for electro-erosion machining of electrically conductive materials. It is an ideal solution for toolmaking, mold manufacturing, and the production of precision components requiring high dimensional accuracy and excellent surface finish. The machine efficiently cuts complex profiles and intricate geometries in both single-piece and serial production. Its rigid construction and optimized machining parameters ensure reliable performance, excellent repeatability, and high productivity. The EDM32 supports taper cutting up to ±6°, allowing greater machining flexibility. It uses wire diameters from 0.12 to 0.25 mm, enabling highly accurate machining of demanding workpieces while achieving a surface finish of 1.6–2.5 Ra, minimizing the need for secondary finishing operations. With a maximum table load of 400 kg, the machine is capable of machining heavy workpieces without compromising precision. Main Features • High-precision wire EDM machining • Suitable for complex profiles and intricate geometries • Taper cutting up to ±6° • High machining accuracy and repeatability • Excellent surface finish • Stable machine construction • Low operating costs • CE certified Technical Specifications • Model: EDM32 • Table travel: 440 × 350 mm • Table size: 380 × 650 mm • Maximum cutting height: 400 mm • Wire diameter: 0.12–0.25 mm Bodpfx Aoy A N Ezjfmelp • Taper cutting: ±6° • Maximum cutting speed: 120–150 mm²/min • Surface roughness: 1.6–2.5 Ra • Machining power: 2 kW • Wire speed: 11 m/s • Maximum table load: 400 kg • Machine dimensions: 1650 × 1150 × 1700 mm • Machine weight: 1150 kg Applications • Mold and die manufacturing • Toolmaking • Precision metalworking • Production of complex and high-accuracy components • Prototype and serial production Transport and Delivery We provide professional transport throughout Europe using specialized heavy machinery logistics. Every machine is securely loaded, protected during transport, and delivered directly to the customer's premises. We also assist with export documentation and international shipping arrangements. Worldwide shipping is available upon request. About Metal Technics Polska Metal Technics Polska is a manufacturer and distributor of professional metalworking machinery. We supply high-quality machines throughout Europe and provide expert technical advice, spare parts, and comprehensive after-sales support. Contact us today for pricing, delivery times, machine availability, additional photos, videos, or a personalized quotation.

Condition: new, maximum load weight: 30,649 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 7,500 mm, loading space width: 2,440 mm, loading space height: 1,500 mm, loading space volume: 27 m³, total width: 2,550 mm, Year of construction: 2026, Equipment: ABS, Schmitz Cargobull SKI 24 SL 7.2 | 3-Axle Tipper Semi-Trailer | Aluminium Box Body 27 m³ Technical Data: Permissible total weight: 36,000 kg (technically 39,000 kg) * Unladen weight: approx. 5,351 kg (+/- 3%) * Volume: approx. 27.2 m³ * Internal body length: approx. 7,500 mm * Internal body width: approx. 2,440 mm * Side wall height: approx. 1,500 mm * Fifth wheel load: 12,000 kg * Axle load: 24,000 kg * Tyres: 6x 385/65 R22.5 on steel rims Chassis & Body: Weight-optimized frame with new design * Standard 7.2 frame made of high-tensile steel, welded * Foldable underride guard, suitable for road finisher * 2" king pin according to SAE standard, exchangeable * Side impact protection in Schmitz Granite * Plastic mudguards with separate lamp bracket * Mud flaps with Schmitz logo Axles & Suspension: 3 x SCB 9 t ROTOS axles, disc brakes Ø 430 mm * Automatic/pneumatic axle lift on 1st axle with start assist * Air suspension SCB MRH4-KU35 Hydraulics: HYVA hydraulic cylinder 170–250 bar (low and high pressure operation) * Smallest stage hard-chromed * Hydraulic hose with screw coupling (1” female thread, max. 250 bar) * Bracket and parking position at working platform Braking System: Two-line compressed air system with standard couplings * EBS 2S/2M including stability program * Steel air tank * Double-diaphragm spring brake cylinder Bsdpfx Afey Iii Remelp * Lift and lowering device with auto-reset function * Load pressure gauge Electronics & Safety: EBS power supply via ISO 7638 + CAN * Automatic lowering during tipping * 2 wheel chocks with holder TrailerConnect®: TrailerConnect control unit CTU incl. battery * CTU module 1 (position & technical data, 12 months) * Data storage (12 months) * Tyre pressure monitoring system Lighting: 24V lighting system with multi-chamber lights * 2x 7-pin sockets + 1x 15-pin socket * LED side marker lights with indicator function * White front position lights * 2 LED reversing lights at rear * LED lane marker lights Body & Superstructure: Aluminium box body 7,500 mm, height 1,500 mm, internal wall thickness 3.5 mm * Aluminium floor: rear 8 mm / front 7 mm * Front wall inclined 20°, with sturdy supports for front tipping cylinder * Working platform with access at front left and ladder for body entry * Rear wall flap made of aluminium, inclined, with all-round sealing * 4 mechanical hook locks, including additional tension fasteners * Centrally mounted grain chute with cover * Reinforced rear end Tarp & Spriegel: PVC roll-top cover silver (RAL 9006) with side stops * Straight cover frame with swivelling/removable crossbows * Tarp operating rod (short version) Paintwork: Tipper body: Light grey RAL 7035 * Chassis: Nova Grey * Wheels: Silver RAL 9006 * Wheel hubs: Black, KTL-coated * Conspicuity markings in red (rear) and white (sides) Registration: Vehicle with German documents * EC type approval including CoC * A-sign for waste transport For further information, please feel free to contact us.

Condition: new, This is a brand new binder, supplied in crate. The SpeedBind range of perfect binders meets the growing demand for professionally bound documents and books where quality presentation, quick turnaround, and ease of operation are essential. This SpeedBind 420 Pro offers the ability to produce A3/A4 Landscape/A4/A5 & A6 perfect bound books and documents. Key Features Blsdpfey Dr Hdex Afmsp Colour touchscreen control for fast setup Adjustable spine clamping pressure and time Milling and notching spine preparation Combined spine and side gluing system Single glue tank for EVA adhesives Integrated paper dust extractor Fast warm-up time Output: up to 375–450 cycles per hour Padding mode for pad production Control System Operation is via an intuitive colour touchscreen control panel. All settings — including operation mode, glue temperature, clamp pressure, clamping time, and speed — are managed from the touchscreen. Setup is completed within seconds, ensuring consistent results across varying book sizes. Minimal operator training is required. Spine Preparation Spine preparation is performed using an extra-durable milling and notching disc equipped with: 20 milling teeth 2 notching blades Before glue application, the book block passes over the disc to break down paper fibres on the spine. This process allows superior glue penetration, improving binding strength and durability. Glue System The SpeedBind features a single glue tank for both spine and side gluing. Designed for modern high-strength EVA glues, it eliminates the need for separate adhesives, simplifying operation and maintenance. A tail structure stabilizes the glue layer on the spine before the book block meets the cover. Excess glue is removed automatically, ensuring precise application and clean, professional finishes. Clamping System The adjustable clamping station allows fine control of: Clamp pressure – prevents over- or under-clamping Clamping time – adjustable for different paper and cover materials This ensures a perfectly squared spine and consistently high-quality binding results. Dust Extraction An integrated paper dust extraction system is included as standard. During milling and notching, paper dust is collected in a cloth bag, reducing internal buildup and maintaining clean, reliable performance. Padding Mode In addition to book binding, the SpeedBind includes a padding mode for producing pads and similar products, increasing production flexibility. Specifications Manufacturer Glendale Model SpeedBind 420 Pro Condition New Stock Number 114909 Mode of operation Manual, automatic & fast Max spine length 420mm Sheet capacity 2-60mm Production speeds 375-450 per hour Control panel 7" Colour Touchscreen Milling & notching 20 milling teeth and 2 notching blades Side Glue Yes Adjustable clamp pressure Yes Adjustable clamp time Yes Warm up time 25 minutes Dust extractor Included Electrical requirements 220-240v 50Hz Weight 285kg Dimensions L1600mm x D590mm x H1100mm

Condition: new, Year of construction: 2020, functionality: fully functional, machine/vehicle number: BH6723-BH1001, tank capacity: 1,000 l, Equipment: documentation/manual, BRINOX 1,000 L Pre-Fill Tank – 1.4435 – Double Jacket – PED Cat. IV Module G – TÜV – FAT – 2020 – As New Manufacturer: BRINOX d.o.o. Type: SVMMBI-1000 Tag No.: BH6723-BH1001 Serial No.: 1003454 Year of Manufacture: 2020 CE Marking: CE 0036 Condition: As new / unused TECHNICAL DATA Product type: Pre-fill / process vessel Nominal volume: 1,000 L Total volume: 1,400 L Net weight: approx. 610–762 kg Product contact material: 1.4435 (AISI 316L) Permissible pressure PS: -1 / +3 bar Test pressure PT: 5.4 bar Permissible temperature TS: -10 / +150 °C Fluid group: 1 Design according to AD 2000 Pressure vessel in accordance with PED 2014/68/EU Category IV Module G – Individual inspection Notified body: TÜV SÜD Identification number: 0036 TÜV CERTIFICATION EU Declaration of Conformity (Module G) Certificate no.: Z-EU-SI-LJU-20-05-2702107-19125214 Inspection report no.: P-EU-SI-LJU-20-05-2702107-19125214 Final inspection in accordance with PED Annex I No. 3.2 carried out Pressure test in accordance with Annex I No. 3.2.2 carried out Acceptance without deviations Permissible load cycle count: 10,000 cycles (1.3 bar) Acceptance date: 20.05.2020 FAT – Factory Acceptance Test Complete works FAT carried out: • Pressure test • Visual inspection of weld seams • NDT testing (RT/PT) • Dimensional inspection • Surface roughness measurement (≤ 0.8 µm) • Calibration test • Documentation review FAT fully documented. DESIGN • Cylindrical, horizontal pressure vessel • Double jacket for heating/cooling • Internally electropolished • Pharmaceutical-grade weld finish • Manhole DN 500 • CIP connection • Safety valve • Pressure gauge • Multiple process and measuring nozzles • For pressurised and vacuum operation CONDITION • Never used in production • Factory tested • TÜV Module G certified • As-new industrial condition • No signs of use • Immediately available DOCUMENTATION Complete structured documentation available, including: • EU Declaration of Conformity • TÜV certificate with inspection report • TÜV design assessment • FAT protocols • Material certificates EN 10204 3.1 • WPS/WPQR and welders’ lists • NDT reports • Surface roughness protocols • Internal pressure test • Measurement reports • Calibration certificates • Parts list and drawings • Operating and maintenance manuals Bedpeykqmzjfx Afmelp Digital documentation folder available. • Pharmaceutical solutions • WFI / PW systems • Buffer and media preparation • Sterile liquid processes • GMP installations • Biotechnology High-quality BRINOX pharmaceutical specification with PED Cat. IV Module G individual inspection by TÜV SÜD (CE 0036) and complete FAT documentation. Not a standard tank – tested project quality. Immediately available.

Condition: new, power: 397 kW (539.77 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 4,000 mm, loading space width: 2,480 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Brand new Volvo 8x2 with an F2150RAL Fassi loading crane including fly jib and hydraulic winch Equipment as per building description Chassis: (New model 2024) • Manufacturer/Type: Volvo FH 540 8x2, wheelbase 4900 mm • For detailed vehicle equipment, please refer to the enclosed documents. • Driver’s cab GLOBE • 1 x oil pump type: Sunfub • New MOT / emissions test • Initial inspection, error reading, and parameterization of the vehicle. • If necessary, day registration with all entries. • Light bar • LED brown/brown • LED • Rotating beacons on the roof • Complete control of the warning lighting (heavy transport/tow truck type) Superstructure: • Carrying out all chassis work required for crane installation, disassembly and assembly of attachments, exhaust system, tanks, etc. Adaptation of the vehicle frame. • All chassis and bodywork are carried out in accordance with the installation guidelines of each chassis manufacturer and in the best quality. • Complete assembly of a specially designed and manufactured auxiliary frame made from fine-grained steel for crane and body. The auxiliary frame, welded and bolted to the vehicle chassis frame, guarantees extremely high torsional rigidity and perfect stability of the crane vehicle. The unique feature is the design of the auxiliary frame. Produced to the highest quality and painted in an RAL colour to be specified during order clarification. • Mounting/bolting the crane and main support carrier to the auxiliary frame. Installation of all hydraulic and electrical connections. Installation location: Front • Platform configuration as steel/welded construction, REMOVABLE platform, • Length approx. 4000 mm x width x 2480 mm. Bodpfxewtairo Afmjlp • Platform body steel / sandblasted / repainted, • RAL colour to be specified during order clarification. • Detachable aluminium side panels Brand Suer, 400 mm high, anodized version • Standard platform floor with welded steel checker plate, 4 mm, painted. • 8 x retractable lashing eyes per side 2000 daN, flexible profile/arrangement. • 2 x MULTISAFE stake pocket rows per approx 600 mm (per side) • 2 x retractable lashing eyes per side 6500 daN • Sturdy front wall made from welded frame, welded-on 4 mm steel plate and 5x accessory hooks, front wall height 1300 mm, steel finish/repainted. • Trim panels, mudguards, version aluminium checker plate, sandblasted, powder-coated and painted. RAL colour to be specified during order clarification. • 3 pcs. toolboxes, version aluminium checker plate, sandblasted, powder-coated and painted. Size and arrangement depend on wheelbase or available space. Mounting of underride protection at the rear and additional support, with installation of all hydraulic and electrical connections. Arrangement of sockets/pneumatics • 2x container locks in front of the front wall • Company FASSI is a renowned Italian crane manufacturer that has been developing, manufacturing and marketing loading cranes from 1.0 TM to 215 TM worldwide for more than 50 years. • New crane type FASSI F2150RAL 2.28RAL, endlessly rotating, fully assembled, installed, and parameterized, with 8 hydraulic extensions on the knuckle boom and Fly-JIB L816L with 6 extensions. • For detailed crane equipment, please refer to the enclosed documents. • Initial inspection and parameterization of the crane are carried out according to the technical regulations and load diagrams of FASSI loading cranes. Lighting: • 1 x LED AS, each 1x on

Condition: excellent (used), Year of construction: 1998, Stapling and folding station Horizon SPF10II with trimmer FC10ll delivery belt Bodpfxowpimre Afmjlp

Condition: used, functionality: fully functional, - Polish production - DTR (Technical Documentation / Operation Manual) - Maximum length of processed material: 2800 mm TECHNICAL PARAMETERS: - Minimum length of cut prism: 600 mm - Maximum thickness of cut prism: 110 mm - Maximum width of input material: 450 mm - Maximum width of finished board: 150 mm - Minimum width of finished board: 70 mm - Saw blade diameter: 400 mm Bledpfx Afoq Rc Rljmjp - Output capacity up to: 20 m³ - Power of right vertical spindle motor: 3.5 kW - Power of left vertical spindle motor: 3.5 kW - Rotational speed of vertical saw drive motors: 2850 rpm - Power of horizontal saw motor: 22 kW - Rotational speed of horizontal saw drive motor: 2850 rpm - Rotational speed of feed drive motor: 1450 rpm - Feed speed (stepless adjustment): 0 - 20 m/min - Supply voltage (50 Hz): 3×400 V - Machine dimensions (L/W/H): 7250 / 1700 / 1600 mm - Transport dimensions (L/W/H): 4700 / 2400 / 1600 mm - Machine weight: 1300 kg

Condition: used, In this offer you are purchasing a used "Plockmatic RCT II" brush trimmer Object of sale: 1 x Plockmatic Trimmer RCT 2.0 Rotation, creasing and 2-sided trimming For various Xerox models Counter readings: Total: Approx. 987 booklets Bljdpfeqyb U Sjx Afmsp Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for function Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! For further information you can of course also contact us personally.

Condition: used, offer consists of: stitching wire unwinder for 15kg roll without wire Bljdpfew Ewzvjx Afmjp We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: like new (used), Demaco Gen III premixer, Pasta technology Pre-mixer Completely finished with stainless steel 316, sanitary grade Bedpfx Afswyfyvsmolp Excluding electric motor Documentation available (including data for the electric motor) See our other listings VMA Wekerom

Condition: used, stations 16 max. speed sets 3500 /h max. paper size 32 x 47 cm Bsdov E R H Tjpfx Afmjlp stiching folding unit SPF-20 Trimmer FC 20

Condition: new, Year of construction: 2026, 270 L COMPRESSED AIR TANK – HIGH-QUALITY PRESSURE VESSEL FOR COMPRESSED AIR SYSTEMS Key Features of the 270 L Pressure Vessel Professional Pressure Design – made of high-grade 4 mm thick steel, resistant to pressure and corrosion. UDT Certification and CE Marking – compliance with European safety and quality standards. Working Pressure of 11 bar – suitable for most pneumatic systems, including those with higher demands. Large Capacity – 270 Litres – ensures stable air supply and reduces compressor start-stop frequency. Multi-connection System – 5 connection ports with diameters of 1", 2", and 1/2" allow flexible integration with various installations. High-Quality Finish – durable anti-corrosion coating inside and outside the tank. Universal Mounting Position – vertical design saves space in industrial environments. Construction and Technology – Robust Design for Demanding Applications This compressed air tank is engineered for heavy-duty use in industrial settings. The body is made from 4 mm thick structural steel, ensuring resistance to pressures up to 11 bar and enabling long-term operation. All welds undergo strict quality control, and the tank surfaces are protected with a corrosion-resistant coating that withstands chemical and atmospheric factors. The tank includes a nameplate with the CE mark and the notified body number of UDT, confirming its approval for use in the Polish and European markets. The set comes with complete technical documentation, a pressure vessel passport, and material certificates. Standard Equipment Bedpfx Afjxbzalomelp Connection Ports: 5 pcs – diameters: 1", 2", 1/2" Nameplate with CE Mark UDT Notified Body Number Complete Technical Documentation and Pressure Vessel Passport Internal and External Anti-Corrosion Coating

Condition: used, Year of construction: 2001, functionality: fully functional, Groninger Filling and Capping Line – Type DFK 6001 & KVK 206 Manufacturer: Groninger GmbH, Crailsheim Models: DFK 6001 (volumetric dosing filler) & KVK 206 (dropper inserter/capper) Year of manufacture: 2001 Machine No.: DFK 5265 / KVK 5266 Electrical connection: 220/380 V, 3 phase, 50 Hz Documentation: Machine and operating manual (German) available Line output: According to manufacturer: up to 9,000 units/hour Actual recent operation: approx. 8,000 units/hour Output infinitely variable Technical Data – Filler (DFK 6001): 6-head volumetric dosing filler for free-flowing liquids Currently equipped with stainless steel pumps (dosing range 10–133 ml) General dosing range: 0.15–266 ml Bottles up to Ø 100 mm, max. height 320 mm Subsurface filling possible (also for foaming products) Pumps can be quickly removed for cleaning and sterilization Filling needles are adjustable in height and laterally Operation via control panel (on right) and dial scale handwheel (at rear) Working area protected by folding glass doors Manual feed via rotary table Ø 1000 mm, onward transport via plastic slat-chain conveyor Technical Data – Capper (KVK 206): Dropper inserter & capping machine Performance range: Object Ø: 20–100 mm Object height: 30–250 mm Cap Ø: 10–60 mm Cap height: 10–60 mm Capacity: max. 9,000 units/hour Closures separated in sorting bowls, fed and placed automatically Press-fit stations and capping heads synchronized Torque clutch adjustable for defined closure force Bledpfew Sd Nrex Afmsp Finished, closed bottles ejected on the right Processed formats: 4 bottle formats: 40 / 50 / 80 / 125 ml Same droppers and screw caps for all formats Dimensions (approx.): Line: 700 × 270 × 225 cm Control cabinet: 180 × 60 × 220 cm Application areas: Pharmaceutical industry Cosmetics industry Chemical industry Special features: Compact, GMP-compliant stainless steel line Flexible dosing ranges, also suitable for foaming liquids Ready for immediate use Condition: Well-maintained used condition Available immediately from Çorlu, Turkey Price: On request

Condition: new, Year of construction: 2026, CORMAK TH410S Thickness Planer with Spiral Cutter Head The CORMAK TH410S thickness planer with a spiral cutter head is an advanced woodworking machine designed for professional users who require maximum precision, durability, and operating comfort. The spiral cutter head equipped with 72 replaceable carbide inserts provides exceptional surface quality, significantly quieter operation, and lower consumable wear compared to traditional straight knife cutter heads. Main advantages of the CORMAK TH410S thickness planer with spiral cutter head Spiral cutter head with 72 inserts – ensures smooth cutting, reduces vibration and noise by up to 50%, and provides significantly longer service life compared to conventional straight knives. Replaceable carbide inserts – individual segments can be rotated or replaced when worn or damaged, reducing operating costs. Ground cast iron table – provides optimal material sliding and stable workpiece guidance. Three feed speeds – allows adjustment of the processing speed according to the type of wood and production requirements. Digital height indicator – enables precise thickness adjustment with accuracy up to 0.1 mm thanks to the indicator mounted on the handwheel. Chain drive system – ensures smooth and precise material feeding through the machining zone. Advanced safety features – compliance with occupational health and safety requirements and technical documentation standards ensures safe operation. Design and technology The CORMAK TH410S thickness planer is based on a robust steel and cast iron construction, providing high rigidity and resistance to vibration. The 95 mm diameter spiral cutter head is equipped with 72 carbide inserts arranged in a spiral pattern, ensuring continuous cutting and eliminating the risk of tearing wood fibres, even when processing hard and resinous wood species. The extraction and sound-insulating cover provides quick access to the cutter head and simplifies maintenance operations. Precision and working efficiency With a planing range from 5 to 230 mm and a working width of 410 mm, the machine enables processing of both thin boards and thick structural elements. The cutter head speed of 4050 rpm and powerful 3.0 kW (S1) motor ensure high performance even during intensive operation. The use of a spiral cutter head allows achieving a high-quality surface finish without the need for additional sanding, significantly reducing preparation time before further processing. Standard equipment Spiral cutter head with 72 carbide inserts Digital thickness adjustment indicator Feed drive with chain transmission Extended table with support rollers Sound-insulated dust extraction cover Complete safety guards compliant with technical documentation and workplace safety standards Technical specifications Parameter Value Thickness planing width 410 mm Thickness adjustment range 5–230 mm Planer shaft diameter 95 mm Number of knives (spiral inserts) 72 pcs Planer shaft speed 4050 rpm Feed speed 6 m/min Dust extraction connection Ø100 mm Motor power 4.2 kW Motor power S1 100% duty 3.0 kW Voltage 400 V Extraction outlet diameter 100 mm Gross weight 263 kg Dimensions Parameter Value Width 1110 mm Depth 710 mm Blodpex Dlp Ajfx Afmsp Height 1020 mm Table size – width 930 mm Table size – depth 410 mm

Condition: refurbished (used), functionality: fully functional, FREWITT MG-803 OSCILLATING SCREENING MILL / GRANULATING MACHINE Completely overhauled in 2026 – Pharmaceutical version – comprehensively documented CONDITION Used Frewitt MG-803 in exceptionally good, fully overhauled condition. Bljdpfxozu Tu Is Afmjp As part of a comprehensive mechanical and electrical general overhaul, the machine was completely disassembled, cleaned, technically refurbished, and professionally reassembled in 2026. The entire overhaul is detailed in a 101-page overhaul report with numerous photos, drawings, spare parts lists, and work steps. APPLICATION Oscillating screening and granulating machine for applications, in particular, in the pharmaceutical, chemical, and food industries. Stainless steel version with professionally refurbished product-contact surfaces for high hygienic requirements. COMPLETE OVERHAUL 2026 The following work was carried out as part of the overhaul, among other things: - Complete disassembly of the machine - Overhaul of fixed and moving bearing heads - Refurbishment of the connecting rod drive and guide units - Ultrasonic cleaning and refurbishment of the components - All deep groove ball bearings, cylindrical roller bearings, and linear bearings replaced - All radial shaft seals and Garlock seals replaced - Joint screws newly manufactured from stainless steel 1.4305 - Electric motor and gearbox completely overhauled by a specialist company - New bearings and seals in the drive - Drive components sandblasted and protected with a protective coating - New conductive and lockable swivel casters - Safety device of the machine door overhauled - Complete reassembly and final function test PHARMACEUTICAL SURFACE FINISH All product-contact stainless steel surfaces were professionally ground and polished by a specialized company. Surface roughness of product-contact surfaces: Ra ≤ 0.8 µm TECHNICAL DATA Manufacturer: Frewitt Model: MG-803 Year of manufacture: 1997 Machine type: Oscillating screening/granulating machine Version: Pharmaceutical/stainless steel version Installation: mobile Product-contact surfaces: Ra ≤ 0.8 µm Complete overhaul: 2026 SCOPE OF DELIVERY - Frewitt MG-803 - Stainless steel feed hopper - Stainless steel discharge hopper - Rotor - Screening unit / sieve basket with lateral guide rails - Extensive selection of various sieve inserts - Complete drive and connecting rod system - Protective cover and safety sensors - Mobile stainless steel frame with new conductive, lockable rollers FUNCTION TEST After the complete overhaul, the machine was completely assembled and subjected to a function test. The MG-803 runs very smoothly and vibration-free and is ready for immediate use. DOCUMENTATION Extensive documentation available: - Original operating instructions - Technical drawings - Parts lists - Electrical documents - Maintenance and conformity documents - 101-page overhaul report of the complete overhaul in 2026 with extensive photo and work documentation INSPECTION / TEST RUN Inspection and test run possible by appointment. Subject to prior sale and errors.

Condition: excellent (used), mileage: 188,961 km, color: white, lifting height: 33,400 mm, General information Year of manufacture: 2000 Operating hours: 26.269 Drivetrain Drive: Wheel Bodpezvgliefx Afmolp Weights Empty weight: 35.900 kg Functional Lifting capacity: 5.000 kg Dimensions of cargo space: 1280 x 260 x 400 cm CE mark: yes Condition Technical condition: very good Visual appearance: very good Other information Delivery terms: EXW Production country: NL Additional information Please contact Vink Machinery for more information = Additional options and accessories = - Counterweights - Hook blocks = Remarks = Spierings SK365-AT3 * 2000 * 26,269 operating hours * Diesel and 400 Volt drive * 3 axles * Manual transmission * 6x6x4 drive/steering * Lifting capacity 5,000 kg * Point load 1,700 kg * 33.4 lifting height * 30.4 meters horizontal reach * 188,961 km * Includes documents and maintenance history

Condition: excellent (used), functionality: fully functional, gearing type: hydrostat, fuel type: diesel, color: orange, overall weight: 7,200 kg, empty load weight: 7,200 kg, operation weight: 7,400 kg, tire condition: 80 %, axle configuration: 6x2, number of seats: 2, first registration: 12/2014, shovel volume: 3.8 m³, suspension: air, Year of construction: 2014, operating hours: 6,100 h, Equipment: adjustable chassis, hydraulics, WE HAVE THREE CATERPILLAR ASPHALT PAVERS IN STOCK: TWO ORANGE AND ONE YELLOW. The following offer applies to a 2014 Caterpillar AP300D with 6,100 operating hours, equipped with an AS3173 working table. For sale is a professional asphalt paver designed for the construction and renovation of surfaces in small and medium-sized road projects. Its compact dimensions, hydrostatic drive, and hydraulically adjustable working width make it suitable for use in urban areas, on local roads, in parking lots, and on bicycle paths. MACHINE SPECIFICATIONS • Manufacturer: Caterpillar • Model: AP300D • Year of manufacture: 2014 • Operating hours: 6,100 hours Bljdpfx Afez I Srcomep • VIN/PIN: CATAP300JTEN00136 • Chassis: wheeled • Working table: Caterpillar AS3173 • Table serial number: DLC00589 • Weight as indicated on the manufacturer’s plate: 7,400 kg • Maximum permissible total weight: 7,750 kg • Country of manufacture: Italy CATERPILLAR C4.4 ENGINE The four-cylinder Caterpillar C4.4 ACERT diesel engine with a displacement of 4.4 liters provides power to the machine's drive and working units. • Gross power: 55.5 kW / approximately 75 hp • Net power according to model documentation: 50.9 kW / approximately 69 hp • Rated engine speed: 2,200 rpm • Fuel tank capacity: 110 liters • Hydrostatic drive system • Catalog travel speed: up to 16 km/h • Catalog paving speed: up to 30 m/min Smooth speed control allows the work rate to be adjusted to the supply of the mixture and the conditions on the construction site. Paving, travel, and maneuvering modes facilitate operation during surfacing and machine movement. AS3173 WORKING TABLE — WORKING WIDTH 1.70–3.20 M The mounted Caterpillar AS3173 table allows for hydraulically adjustable paving width in the basic range of 1.70 to 3.20 m. Model expansion options: • Width up to 4.00 m after mounting additional extensions • Width from 0.65 m with an appropriate reduction attachment • Catalog cross-profile adjustment of the table: from -2.5% to +4.5% The AS3173 design includes electric heating of the working plates and a vibration system. The table forms the surface and provides preliminary compaction of the mixture before final compaction with a roller. MIX FEEDING SYSTEM The AP300D model has a front hopper with a catalog capacity of approximately 3.8 m³. The mixture delivered by the truck is transported by conveyors to the rear of the machine and then distributed by screws in front of the working table. Independent control of the conveyors and screws allows the material feed to be adjusted to the working width and rate. The ability to change the direction of their operation facilitates control of the mixture when finishing the working strip. The stated price is net and applies to export and for companies. A significant discount is possible for individual customers. We invite you to contact us directly by phone to get your best price.

Condition: used, Year of construction: 2004, functionality: fully functional, Equipment: documentation/manual, CMZ Turning Center 4 Axes: X, Z, C, B Type: TL 25 BTM Year: 2004 Blsdpsz Ih A Defx Afmep CNC: GE Fanuc Series 18i-TB Video Available Inspection Possible Jaw Chucks: Included ✅ Tool Holder: Included ✅ Documentation: Included ✅ Chip Conveyor: Included ✅

Condition: used, operating hours: 2,078 h, lifting height: 5,860 mm, fuel type: electric, mast type: duplex, fork length: 78 mm, fork width: 640 mm, total height: 3,370 mm, total length: 1,940 mm, total width: 1,200 mm, color: yellow, Year of manufacture: 2008 Empty weight: 3.376 kg Lifting capacity: 1.100 kg - Year: 2008 Bjdpfx Aj Adr T Esfmslp - Documentation available: Yes - CE marking present: Yes - Serial number: 61X113W00348 - Operating hours: 2078 - Working level: Hoog - Lifting capacity: 1100kg - Lifting height: 5860mm - Overhead clearance: 3400mm - Fork length: 78mm - Maximum fork width: 640mm - Minimum fork width: 550mm - Mast: Duplex - Drive: Electric - Battery information: - └ Brand/Type: 24/3 PzSH 465 - └ Battery year of construction: 2018 - └ Capacity: 465Ah - └ Battery voltage: 48V - └ Tray length [mm]: 830 - └ Tray width [mm]: 420 - └ Tray height [mm]: 790 - Transport dimensions: 1940mm x 1200mm x 3370mm (l x w x h) - Transport weight [kg]: 3376kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Koen van Lent

Condition: used, Weiss Type: WT3-480/60 Weiss Temperature Test Chamber WT3-480/60 EX / ATEX – explosion-proof test chamber Water-cooled version With digital control and touch panel Temperature range: -60 °C to +160 °C For sale is a used temperature test chamber from the manufacturer Weiss Umwelttechnik GmbH. The system has an explosion-proof test chamber and is suitable for industrial temperature tests within the permissible operating conditions. ATEX explosion protection: Marking according to the nameplate: II 2/- G IIB T3 Gb/- Test chamber explosion-proof CE 0044 The permissible operating conditions are determined by the manufacturer's documentation. Control panel "Touch Panel" Control and operating functions as well as temperature programs can be called up and set via the touch panel. Technical data: Manufacturer: Weiss Umwelttechnik GmbH Type: WT3-480/60 Device type: Temperature test chamber Version: EX / ATEX – Test chamber explosion-proof Cooling: water-cooled Humidity control: not available Test chamber volume: approx. 480 liters External dimensions without door fittings: Height: approx. 2050 mm Width: approx. 1000 mm Depth: approx. 2480 mm External dimensions with hinges and door handle: Height: approx. 2050 mm Width: approx. 1100 mm Depth: approx. 2480 mm Overall depth including touch panel: approx. 2600 mm Internal dimensions: Height: approx. 920 mm Width: approx. 800 mm Depth: approx. 650 mm Note on dimensions: The specified dimensions are reference values for the explosion-proof WEISS 480-liter series. Deviations are possible in this special version. Data for temperature tests: Temperature range: -60 °C to +160 °C Temperature change rate: Heating: approx. 4.04 K/min Cooling: approx. 1.42 K/min Measured values according to the workshop report. Data for operation: Rated voltage: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 17.0 kW Rated current: 30.0 A Refrigerant: R404A – 3.5 kg R23 – 1.2 kg Refrigeration system: Max. low pressure: 18 bar g Max. high pressure: 25 bar g Standing pressure: 8.5 bar g Equipment: Digital control with touch panel Test chamber lighting Network interface according to workshop report Water-cooled refrigeration system Explosion-proof test chamber Weight: approx. 930 kg Reference value of the explosion-proof WEISS 480-liter series For your safety as a buyer, the following information! The following points are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerants 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. A workshop report is available for this device. Temperature functions and other test points have been documented. According to the workshop report, the cooling function has been repaired. The buffer battery has been replaced. Work has been carried out on the display cabling. Details according to the workshop report. Condition: used Scope of delivery: (See picture) Shipping by forwarding agent possible upon request. (Changes and errors in the technical data Bledpfx Ae Ad Iy Ijfmep and information are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, mileage: 10 km, power: 110 kW (149.56 HP), first registration: 04/2026, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 04/2028, color: grey, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 3,280 mm, loading space width: 2,100 mm, loading space height: 400 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Internal vehicle number: 93734_1 The vehicle is located at our site in 34497 KORBACH, Frankenberger Landstr. 7. Exterior * OU2 Rear tailgate bumper * OU3 AdBlue tank cover * QQ0 Trailer hitch ball head * Trailer hitch, fixed, 3.5 tons * EX5 Trailer socket 12 V, 13-pin * OT6 Battery cover * LAC Paint finish, dust grey RAL 7037 * F62 Heated rearview mirror * OS2 Scattolini three-way tipper, aluminum side walls * LH6 Protective grille for taillights Bledey Nghmopfx Afmep * OF1 External sun visor * WP5 Tool box, plastic Interior * SH6 Driver's suspension seat with armrest * H07 Automatic climate control Multimedia * EF3 2-DIN touchscreen radio Comfort and Environment * JW0 Reversing warning system Safety * SA5 Driver airbag Condition/Documents * Demonstration vehicle Other * KA6 Cover, exhaust system * EE9 Batteries 2x 12V / 100 Ah * A86 Differential lock Other: This offer is non-binding. Errors and prior sale excepted. If a foreign currency is specified, it will be converted using the current daily exchange rate. The currency of the vehicle's location is valid. ----