Used Dmg Ctx Beta 500 for sale (401)

Condition: not inspected (used), Year of construction: 2000, operating hours: 51,204 h, functionality: unexamined, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain TNC 426 / 430, spindle speed (max.): 18,000 rpm, The machine was fitted with a new spindle in 2021! TECHNICAL DETAILS X-axis travel: 1,000 mm Y-axis travel: 800 mm Z-axis travel: 500 mm Speed range: 18,000 rpm Tool holder: SK 40 Tool positions: 30 Table size: 1,250 mm x 800 mm Max. table load: 1,200 kg MACHINE DETAILS Control: Heidenhain TNC 426 / 430 Operating hours: 51,204 / 18,593 h Hfsdpfoyfpc Djx Afnec EQUIPMENT Chip conveyor Heidenhain TS 632 measuring probe Blumlaser tool breakage control

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 11160000593, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, spindle speed (max.): 18,000 rpm, table diameter: 630 mm, TECHNICAL DETAILS Travel X-axis: 600 mm Travel Y-axis: 700 mm Travel Z-axis: 600 mm Number of simultaneous axes: 5 Table diameter: 630 mm Number of T-slots: 9 Distance between T-slots: 63 mm T-slot width: 14H7 mm Centering bore diameter: 50H6 mm Max. spindle speed: 18,000 rpm Feed rate longitudinal: from 20 mm/min to 15,000 mm/min Feed rate transverse: from 20 mm/min to 15,000 mm/min Feed rate vertical: from 20 mm/min to 15,000 mm/min Hfjdpfx Afjyhnxvonoc Rapid traverse: 40 m/min Max. workpiece height: 1,000 mm Max. workpiece diameter: 920 mm Max. workpiece weight on table: 500 kg Table indexing (B-axis): 360° Swivel angle (A-axis): +45/-30° Holding torque A-axis: 3,866 Nm Clamping torque C-axis: 6,008 Nm Max. torque: 2,650 Nm Number of tools: 180 Tool diameter: 80 mm Diameter with adjacent tool pockets empty: 160 mm Max. tool length: 350 mm Max. tool weight: 10 kg Tool holder: SK 40 DIN 69871 MACHINE DETAILS Measuring system resolution: µm Compressed air connection: 5 - 8 bar Power supply: 50 Hz 3x 400 Volt Total power requirement: 44 kVA Noise level: 80 dB(A) Dimensions & Weight Dimensions (L x W x H): 7,500 x 4,500 x 2,628 mm Machine weight approx.: 7,500 kg EQUIPMENT Set of tool holders SK 40 approx. 150 pcs High-pressure coolant system 40 bar Coolant through the spindle (CTS) Renishaw tool probe Lighting Rotating viewing window Electrical cabinet air conditioning unit

Condition: ready for operation (used), Year of construction: 2010, operating hours: 27,052 h, functionality: fully functional, machine/vehicle number: 11680001673, travel distance X-axis: 560 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller model: HEIDENHAIN iTNC 530, spindle speed (max.): 12,000 rpm, The machine spindle was replaced in 2017! Machine equipped with KUKA loading robot! TECHNICAL DETAILS X-axis travel: 560 mm Y-axis travel: 600 mm Z-axis travel: 600 mm Number of axes: 4 Maximum workpiece weight on table: 500 kg Maximum workpiece height: 850 mm Maximum workpiece diameter: 630 mm Table rotation speed: 40 rpm Table clamping torque: 1,580 / 2,300 Nm Maximum torque: 1,550 Nm Pallet changer dimensions (L x W): 400 x 400 mm Hfodpfx Aeyhnpzefnec Maximum pallet changer workpiece weight: 500 kg Number of tools in the tool changer: 120 Maximum tool diameter: 80 mm Tool diameter with free adjacent slots: 160 mm Maximum tool length: 400 mm Maximum tool weight: 12 kg Tool holder: HSK 63 DIN 69893 Form A Spindle diameter: 225 mm Spindle speed: 0 – 12,000 rpm Feed speed: 0 – 60,000 mm/min Rapid traverse: 60 m/min Maximum feed force: 10 N MACHINE DETAILS Control system: HEIDENHAIN iTNC 530 Spindle drive power: 20 kW Connection: 50 Hz 3x 400 V Total power requirement: 58 kVA Dimensions & Weight Dimensions (L x W x H): 5,000 x 2,700 x 2,700 mm Machine weight: approx. 9,700 kg Operating Hours Power-on time: 75,886 hours Operating time: 27,052 hours EQUIPMENT Loading robot KUKA High-pressure coolant system Coolant through spindle (IKZ) 40 bar Spindle taper air purge Probe Chip conveyor Pallet storage rack Setup stations (number): 60 (3x20) Lighting Rinse gun Rotating viewing window Electrical cabinet air conditioner Foot pedal Status indicator lamp

Condition: ready for operation (used), Year of construction: 2000, operating hours: 19,467 h, functionality: fully functional, machine/vehicle number: 1100 0000323, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 550 mm, controller model: HEIDENHAIN 430, spindle speed (max.): 12,000 rpm, The spindle of the machine was replaced in 2016! TECHNICAL DETAILS Travel X-axis: 600 mm Travel Y-axis: 700 mm Travel Z-axis: 550 mm Number of axes: 5 Table length: 630 mm Table width: 500 mm Centering bore diameter: 50 mm Maximum workpiece weight on table: 600 kg Number of pallets: 2 Pallet dimensions: 500 x 500 mm Maximum load capacity: 600 kg Tool magazine - number of tool stations: 60 Maximum tool diameter: 100 mm Diameter with adjacent spaces free: 160 mm Maximum tool length: 350 mm Maximum tool weight: 10 kg Tool holder: SK 40 DIN 69871 Spindle speed (stepless): 20 – 12,000 rpm Feed rate: 1 – 10,000 mm/min MACHINE DETAILS Control: HEIDENHAIN 430 Hjdpfx Asyhnm Tefnofc Connection: 50 Hz 3x 400 V DIMENSIONS & WEIGHT Dimensions (L x W x H): 3,902 x 2,687 x 2,484 mm Machine weight: approx. 9,500 kg Operating hours: 19,467 h EQUIPMENT Cooling unit Coolant through spindle (IKZ) 17 bar Pallet changer Lighting Rotating viewing window

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 83156, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 550 mm, controller model: DECKEL GRUNDIG MILL PLUS, spindle speed (max.): 6,300 rpm, TECHNICAL DETAILS X-axis travel: 800 mm Y-axis travel: 650 mm Z-axis travel: 550 mm Table length: 1,100 mm Table width: 650 mm Milling head indexing (B): 90° Number of tools: 25 Tool diameter: 80 mm Diameter with adjacent free positions: 160 mm Hfedoyhnkxspfx Afnsc Maximum tool length: 315 mm Tool holder: ISO 40 Maximum spindle speed: 6,300 rpm Feed rate: 1–15,000 mm/min Rapid traverse: 15 m/min Spindle motor: 16.2 kW MACHINE DETAILS Control: DECKEL GRUNDIG MILL PLUS Total power requirement: 29 kW Dimensions & Weight Dimensions (L x W x H): 3,100 x 2,300 x 2,500 mm Machine weight: approx. 5,500 kg EQUIPMENT Coolant system Lighting

Condition: excellent (used), Year of construction: 2020, Distance between spinles 800mm, Hfjdpfx Aew Nwfbsfnsc Y axis (+/-105mm), C axis 0.001 degrees, B axis -30/+210 degrees, main spindle speed 5,000rpm, sub spindle speeds 6,000 rpm, milling speed 12,000rpm, bar capacity 65mm, 38 station ATC, spindle power 22/18.5 kw, Siemens 840D control, tool setter, through spindle coolant, magazine barfeed, robot loader,

Condition: excellent (used), Year of construction: 2011, FOR SALE 5-AXIS Machining Centre Model: DMG SAUER ULTRASONIC 20 LINEAR Year: 2011 Configuration: Complete machine with robot To complete the technical file, could you please specify the following characteristics: - Table capacity / Axis travel (X × Y × Z): [e.g., 800 × 500 × 500 mm] Hfjdpjyi Tpiofx Afnoc - Payload / Max. table load: [e.g., 1,200 kg] - Accepted raw workpiece dimensions: [e.g., Ø 500 mm / 700 × 500 mm] - Spindle power / Torque: [e.g., 18 kW, 200 Nm] - Robot capacity (Payload / Reach): [e.g., 10 kg, reach 1,200 mm] - Ultrasonic machining capability: [Amplitude, frequency, compatible tools] SIEMENS CNC Awaiting your response, I remain at your disposal for any further information.

Condition: ready for operation (used), Year of construction: 2023, This 5-axis DMG MORI DMP-70 was manufactured in 2023, featuring a Siemens 840D sl control and a BBT30 direct-drive spindle with a maximum speed of 24,000 rpm. It includes a 25-tool ATC and coolant through spindle at 40 bar. Ideal for high-speed, 5-axis machining with its integrated swivel rotary table. If you are looking to get high quality machining capabilities consider the DMG MORI DMP-70 machine we have for sale. Contact us for more information about this machine. Hfjdpfxox D H His Afnjc Application Types Milling

Condition: like new (used), Year of construction: 2018, operating hours: 3,666 h, functionality: fully functional, turning length: 685 mm, turning diameter over cross slide: 650 mm, spindle speed (max.): 4,000 rpm, spindle bore: 91 mm, travel distance X-axis: 267 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, spindle nose: A2-8, overall weight: 5,400 kg, Equipment: documentation/manual, rotational speed infinitely variable, The machine is operational and set up in our showroom, and can be inspected by appointment! This DMG MORI CLX 450 V3 comes standard with: - 19" SlimLine PLC with TouchScreen. - Siemens electronic handwheel. - Chip conveyor. - High-pressure pump (12 bar). - Unused 3-jaw chuck (SMW AUTOBLOK KNCS-N-260-78 Ø260). - Various VDI-40 tool holders (static). - MARPOSS measuring arm incl. calibration holder (VDI-40). - Mechanical preparation for mist extraction unit. Hodpfxsyh Inhj Afnjfc - Double foot pedal for clamping/unclamping main spindle. - Rinsing gun (5 bar) - Original DMG documentation. - Set of chemical anchors.

Condition: like new (used), Year of construction: 2012, operating hours: 24,864 h, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 375 mm, controller manufacturer: Heidenhain iTNC 530, workpiece diameter (max.): 380 mm, workpiece weight (max.): 2,500 kg, total height: 2,480 mm, total length: 1,970 mm, total width: 2,730 mm, overall weight: 6,900 kg, spindle speed (min.): 18,000 rpm, spindle motor power: 35,000 W, Year of construction: 2012 CNC controller: Heidenhain iTNC 530 Hfjdjyi Am Dspfx Afnsc Axes X-axis travel mm: 400 Y-axis travel mm: 400 Z-axis travel mm: 375 C-axis degrees: 360º (0,001) B-axis degrees: -5º / +110º Distance spindle nose - table surface mm: 125-500 Feed rates m/min: 80 Rapid traverse m/min: 80 Acceleration in the axes m/s2: 10 Milling/turning table nc: Table dimensions mm: 450x400 Maximum workpiece size (D x H) mm: Ø380 Max. workpiece weight kg: 250 Table rotation speed rpm: 1200 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 35/25 (40%ED/cont) Spindle torque Nm: 130/87 Cooling Cooling through the Spindle Center bar: 40 Tool system Tool holder: HSK-A 63 Tool magazine slots: 30 Equipment Chip conveyor Infrared probe Rinsing gun blowing air through spindle center selectable via M-function Signal lamp Laser tool measurement for measuring tool length and diameter 3D quickSET Heat compensator Direct measuring system XYZ Electrical cabinet active cooling unit Oil skimmer Ready for internal cooling (40/80 bar) RENISHAW Measuring probe Automatic door Machine running times Under power: 46650 Spindle Working: 24864 Rated power kVA: 46 Basic machine dimensions / weight Length mm: 1970 Width mm: 2730 Height mm: 2480 Weight kg: 6900

Condition: like new (used), Year of construction: 2009, travel distance X-axis: 200 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 280 mm, controller manufacturer: HEIDENHAIN iTNC530, workpiece weight (max.): 15 kg, table width: 200 mm, table length: 200 mm, spindle speed (min.): 42,000 rpm, Control CNC: HEIDENHAIN iTNC530 Axes X-axis travel mm: 200 Y-axis travel mm: 220 Z-axis travel mm: 280 C-axis degrees: 360º A-axis degrees: -15º max.130º Work Table Table dimensions mm: ø200 Maximum workpiece weight kg: 15 Spindle Spindle speed rpm: 42.000 Cooling Cooling through the spindle bar: 40 Tool System Tool holder: HSK-E32 Tool magazine slots: 60 Hodjxpg H Hspfx Afnjfc Max. tool diameter mm: ø50 Max. tool length mm: 200 Chip-to-chip time s: 10 Equipment Automation LM100 (EROWA ITS72, 5 levels of 9 positions); 10 kg maximum manipulation Electronic handwheel Chip conveyor Infrared probe High-pressure pump NC rotary tilting table Rated power kVA: 40

Condition: like new (used), Year of construction: 2015, operating hours: 26,915 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, nominal power (apparent): 30 kVA, controller manufacturer: M-730UM, workpiece weight (max.): 1,000 kg, total height: 2,800 mm, total length: 3,300 mm, total width: 3,000 mm, table width: 600 mm, table length: 1,100 mm, spindle speed (min.): 8,000 rpm, Year of construction: 2015 CNC controller: M-730UM Axes X-axis travel mm: 800 Y-axis travel mm: 530 Z-axis travel mm: 510 Distance spindle nose - table surface mm: 150-660 Feed rates m/min: 5 Rapid traverse m/min: 30 Hodpjxwxc Asfx Afnjfc Worktable Number of pallets: 1 Table dimensions mm: 1100x600 Max. workpiece weight kg: 1000 Spindle Spindle speed rpm: 8000 Spindle drive power kW: 30/22 (25%ED/cont) Spindle torque Nm: 304 Tool system Tool holder: MAS-BT 50 Tool magazine slots: 30 With free neighboring places mm: 240 With occupied neighboring places mm: 120 Max. Tool Length mm: 350 Max tool weight kg: 20 Tool-to-tool time s: 2.34 Equipment Chip conveyor Internal cooling lubricant supply 4th axis DDRT-260X Custom Macro common variables (200) Machine running times Under power: 35896 Spindle Working: 26915 Rated power kVA: 52 Basic machine dimensions / weight Length mm: 3300 Width mm: 3000 Height mm: 2800 Weight kg: 6870

Condition: like new (used), Year of construction: 2015, operating hours: 3,886 h, functionality: fully functional, turning length: 685 mm, turning diameter over cross slide: 650 mm, spindle speed (max.): 4,000 rpm, spindle bore: 91 mm, travel distance X-axis: 267 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, chuck outer diameter: 250 mm, swing diameter over cross slide: 650 mm, spindle nose: A2-8, overall weight: 5,200 kg, Equipment: documentation/manual, rotational speed infinitely variable, This DMG MORI CLX 450 V3 is standard equipped with: - PROGRESSLine (display of remaining production time and piece count for a complete machining process). - Interface for barfeeder. Hfsdpfxjyguqio Afnjc - Chip conveyor. - High-pressure pump (12 bar). - New 3-jaw chuck (SMW AUTOBLOK type BB-D Ø250) incl. sets of jaws. - Workpiece catcher/dispenser. - Original DMG mist extraction system. - Foot pedal for clamping/unclamping main spindle. - Rinsing gun (5 bar). - Original DMG documentation.

Condition: good (used), Year of construction: 2003, functionality: fully functional, input voltage: 400 V, travel distance X-axis: 780 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, workpiece weight (max.): 4,000 kg, number of slots in tool magazine: 120, controller manufacturer: Heidenhain, total height: 2,800 mm, total length: 6,000 mm, total width: 6,000 mm, overall weight: 12,000 kg, table length: 630 mm, table width: 500 mm, controller model: iTNC530, nominal power (apparent): 61 kVA, rapid traverse Z-axis: 50 m/min, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, spindle speed (max.): 18,000 rpm, spindle speed (min.): 20 rpm, table load: 4,000 kg, operating hours of spindle: 19,500 h, Equipment: chip conveyor, rotational speed infinitely variable, DMG DMC 60T RS3 with Heidenhain iTNC 530, no maintenance backlog, in good condition. Ideal machine for unmanned operation, geometrically within new-machine tolerance. The machine can be inspected and measured on site by arrangement. Machine Data: Machine description: Machining centre with pallet storage Manufacturer: DMG MORI Model: DMC 60T RS3 Year of manufacture: 2005 Condition: good Equipment: - Direct linear measurement in X/Y/Z (glass scales) - Chip conveyor - High-pressure coolant system 40 bar (IKZ) - Extraction unit - NC rotary table - Tool magazine, 120 positions - Heidenhain measuring probe - Rotating viewing window - High-pressure coolant 40 bar - Signal lamp - Chip flushing - Operating mode 4 Technical Data: Hfjdpfx Aorxrkljfnsc Number of axes: 5-axis Control: Heidenhain iTNC 530 NC rotary table clamping surface: 500 mm x 630 mm Weight: approx. 9,000 kg Chip conveyor: Yes Coolant system: Yes Internal coolant supply: Yes Travels and axes: X-axis: 780 mm Y-axis: 560 mm Z-axis: 560 mm C-axis: 360° B-axis: -90°/+12° Feed rates and rapid traverse: X-axis: 50 m/min Y-axis: 50 m/min Z-axis: 50 m/min B-axis: - C-axis: 30 m/min Motor spindle: Max. speed: 18,000 rpm Spindle taper: HSK A63 Tool changer: Automatic tool changer: Yes Number of magazine positions: 120 Pallet changer: 5 pallets

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, operating hours: 69,000 h, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, number of slots in tool magazine: 40, controller manufacturer: Siemens, total height: 2,800 mm, total length: 7,000 mm, total width: 4,000 mm, overall weight: 10,000 kg, table length: 800 mm, table width: 630 mm, controller model: Sinumerik 840D powerline, coolant supply: 40 bar, nominal power (apparent): 69 kVA, rapid traverse Z-axis: 50 m/min, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, spindle nose: HSK63, spindle speed (max.): 12,000 rpm, spindle speed (min.): 20 rpm, table load: 800 kg, operating hours of spindle: 27,000 h, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, DMG MORI DMC 80U Year of manufacture: 2002 Operating hours: 69,000h Spindle hours: 27,000h Equipment: 5-axis Swivel head Direct path measurement in X/Y/Z (glass scales) Chip conveyor Extraction NC rotary table as an add-on table Pallet changer Tool magazine 60 places Heidenhain measuring probe Handwheel Rotating viewing window IKZ 40 bar Chip flushing Operating mode 4 + Machine technically serviced and in very good condition + Geometrically within new machine tolerance Hfsdpfov Eurmsx Afnoc + Transport and commissioning can be offered separately

Condition: excellent (used), Year of construction: 2006, operating hours: 32,000 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, torque: 121 Nm, controller manufacturer: Siemens, table width: 700 mm, table length: 900 mm, table load: 1,400 kg, rotational speed (min.): 20 rpm, rotational speed (max.): 18,000 rpm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 32,000 h, coolant supply: 40 bar, spindle nose: HSK63A, number of slots in tool magazine: 30, tool length: 350 mm, tool diameter: 100 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, DMG MORI DMU 80P duoBlock Year of manufacture: 2006 Operating hours: 62,000 h Spindle hours: 31,000 h Function tested and cleaned Maintenance performed according to manufacturer's specifications Geometry within new machine tolerance Hfsdpfsw Ht Ibjx Afnoc Equipment: 5 axes Swivel head (controlled B-axis) Direct linear measurement in X/Y/Z (glass scales) Chip conveyor Extraction system NC rotary table Tool magazine with 30 positions Heidenhain touch probe BLUM laser Handwheel Rotating viewing window ICS 40 bar (internal coolant supply) Chip flushing Operating mode 4

Condition: reconditioned (used), Year of construction: 2005, operating hours: 53,500 h, functionality: fully functional, turning length: 1,500 mm, turning diameter over cross slide: 640 mm, turning diameter: 400 mm, spindle speed (max.): 4,000 rpm, spindle bore: 107 mm, travel distance X-axis: 550 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 1,500 mm, total height: 3,100 mm, total length: 10,000 mm, total width: 5,000 mm, overall weight: 20,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, Manufacturer: DMGMORI Type: GMX 400 linear Year of manufacture: 2005 Operating hours: 53,500h Spindle hours: 22,000h Control: Siemens 840D powerline Equipment: - 7 axes - automatic tool changer (60 positions) - swivel head as B-axis - 12-way tool turret as additional axis, VDI40 with 12 driven tools - belt filter system with internal cooling and chip conveyor Hfedpfev Euhnjx Afnec Condition: - machine fully functional - geometry within the manufacturer's tolerance for new machines - all wear parts replaced

Condition: ready for operation (used), Year of construction: 2013, operating hours: 8,654 h, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, controller manufacturer: SIEMENS, controller model: 840D SL, spindle speed (max.): 12,000 rpm, spindle motor power: 13,000 W, number of axes: 3, This 3s DMG MORI 635V vertical machining centre was manufactured in 2013. It features travels of 635 mm in the X-axis, 510 mm in the Y-axis, and 460 mm in the Z-axis, with a rapid traverse of 30 m/min. The spindle speed ranges from 20 to 12,000 rpm, and it includes a 20-station tool changer. Consider the opportunity to buy this DMG MORI 635V vertical machining centre. Contact us for further details. • Rapid traverse: 30 m/min • Tool clamping: per DIN 69872 • Tool changer: 20-station SK40 (disc-type magazine with double gripper) • Table dimensions: 560 × 790 mm • PROGRESSline & Planonlight: Display of production time and remaining number of parts • DMG Netservice: Client installation on external PC • Options included: • Extended tool magazine: 30 stations (chain-type with pockets and double gripper) • Measuring system: Direct displacement measuring system for X, Y, Z axes with pressurization • Hours: • Power-on: 21,788 h • Spindle: 8,654 h Additional equipment • Renishaw probe kit: • OMP40-2 measuring probe (optical transmission) • OTS wireless tool setting probe • OMI-2T optical transmission module • Chip disposal package: • Scraper-type chip conveyor (discharge height: 950 mm) • 185-litre tank • Cleaning spray gun Hjdpfx Aoyka Inofnsfc • 4-colour signal lamp • Control option: Electronic handwheel • Electrical: 20 kVA transformer • Tooling: Sandvik SK40 tooling kit Technical Specification Taper Size SK 40

Condition: used, Year of construction: 2006, functionality: fully functional, DMG DMC 70H Duoblock + RS4 CNC Machining Centre (2006) Manufacturer: DMG Model: DMC 70H Duoblock + RS4 CNC Machining Centre Year of manufacture: 2006 Condition: Used, powered on and ready for demonstration Power-on hours: 92,800 h Spindle hours: 70,200 h Spindle speed: 18,000 rpm Spindle mount: SK40 Tool magazine: 180 positions Internal coolant supply (IKZ): 40/80 bar Belt filter system RS4 pallet station including 4 pallets. Further information to follow. Hjdox S N E Hepfx Afnsfc

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, total height: 2,670 mm, total width: 3,288 mm, spindle speed (max.): 14,000 rpm, spindle motor power: 15,000 W, product length (max.): 2,275 mm, number of axes: 3, This 3s DMG DMC 635 V vertical machining centre was manufactured in 2008. It features a maximum spindle speed of 14,000 rpm and a powerful spindle with 18.5 kW. The machine has a working area with a table dimension of 560 × 790 mm and can handle workpieces weighing up to 600 kg. If you are looking to get high-quality machining capabilities, consider the DMG DMC 635 V machine we have for sale. Contact us for further details. • Distance table surface / spindle nose: 720 mm • Working area • Number of pallets: 1 • Table dimensions: 560 × 790 mm • Maximum workpiece weight: 600 kg • Spindle • Maximum torque: 100 / 74 Nm • Tool magazine • Tool holder: SK40 Hfedpfx Aeykaawjfnjc • Tool magazine positions: 20 • With adjacent tool positions free: 130 mm • With adjacent tool positions occupied: 80 mm • Maximum tool length: 300 mm • Tool change time: 1.6 s • Chip-to-chip tool change time: 6 s • Equipment / features • Electronic handwheel • Air flow through the spindle activated via M function • Working time • Power on: 34,484 h • Spindle running: 25,110 h • Rated power: 35 kVA Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 630 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 850 mm, controller manufacturer: SIEMENS, controller model: 840 D, table width: 500 mm, table length: 500 mm, spindle speed (max.): 18,000 rpm, spindle motor power: 20,000 W, number of slots in tool magazine: 303, number of axes: 4, This DMG DMC 60H Linear Horizontal Machining center was manufactured in the year 2013 and has 46048 production hours. It is equipped with a Siemens 840 D control unit and has 4 axis. The machine has a spindle speed of 18000 rpm. See original delivery note as PDF (German) attached to see all technical positions. Additional equipment • Scraper belt chip conveyor with coolant system 980 liter, paper belt filter, discharge height 950 mm, width 380 mm, IKZ 80 bar / 14 l/min through spindle center (AD), pressure infinitely programmable, selectable via NC program, Roof flushing of the working area 180 l/min via flushing nozzles with a ripple valve • Rotating viewing window / work area door • Flushing gun with pump • Double gripper Hodpfjyi Ekfjx Afnjfc • Wheel magazine • NC rotary table Ø 630 mm • 3D path control Machine Benefits Qualitative Machine Benefits • Mcis tdi tool management (module tdi machine) - overview , tool handling, planning • Extraction mechanical and electrical preparation for oil mist extraction • Tool breakage check mechanical design Technical Machine Benefits • Number of pallets: 12 // round pallet storage: rs 12 • Rotary pallet changer // work table with pallet support // permissible load: 600 kg // 2 pallets 500 x 500 mm with t-slots // pallet management // pallet changer cladding // claw flushing pallet • Cooling through the spindle center: 80 bar • Tool magazine: wheel magazine (5 wheels) with 303 magazine slots hsk a63 • Infrared measuring probe renishaw pp60 optical (omp60) hsk-a 63 • Mpc machine protection control (machine protection through rapid shutdown) • Laminated glass safety pane for right-hand cabin door window Extra Information Documentation and Electrical circuit diagram (German) available

Condition: ready for operation (used), Year of construction: 2012, operating hours: 12,421 h, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 620, spindle speed (max.): 13,000 rpm, spindle motor power: 13,000 W, number of axes: 3, This 3s DMG MORI DMC 1035 V ecoline was manufactured in 2012. It features travels of 1035 mm in the X-axis, 560 mm in the Y-axis, and 510 mm in the Z-axis, with a spindle speed range of 12,000 rpm. The machine includes a 20-station tool magazine and an internal coolant supply. Consider the opportunity to buy this DMG MORI DMC 1035 V ecoline vertical machining centre. Contact us for further details. • Rapid traverse: 30 m/min • Main drive: AC, 13 / 9 kW • Internal coolant supply (ICS): 12 bar Hedpfsyizk Ujx Afnjfc • Coolant/air blast switching: Coolant–air blow switching system • Tool magazine: 20 stations, SK40, carousel type with tool pots and double gripper • Table size: 1200 × 560 mm • Hours: 12,421 Technical Specification Taper Size SK 40

Condition: good (used), Year of construction: 2007, operating hours: 24,276 h, Gildemeister Lathe NEF 600 Year of manufacture: 2007 Control: Heidenhain Plus Hfsdpfxjykbk Rj Afnec Max. turning diameter: 600 mm Centre distance: 1,250 mm Swing over bed: 600 mm Cross travel: 320 mm Main spindle: Speed range - main spindle: max. 3,000 rpm Spindle bore: 90 mm Chuck diameter: 320 mm Tool turret: Number of tool positions: 8 positions Total power requirement: 42 kVA Machine weight approx.: 5.0 t Space requirement approx.: 3.6 x 2.14 x 1.95 m Accessories: Rinsing gun, Schunk chuck 315 mm, Tailstock MK 5

Condition: ready for operation (used), Year of construction: 2016, operating hours: 11,898 h, travel distance X-axis: 800 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, controller manufacturer: SIEMENS, controller model: 840 Dsl - ShopMill, overall weight: 5,450 kg, spindle speed (max.): 12,000 rpm, number of axes: 3, This 3-axis DMG ecoMill 800 V was manufactured in 2016. It features a robust SK40 spindle with a speed of 12,000 rpm and a 30-station tool magazine. The machine supports a maximum workpiece weight of 800 kg and includes a built-in coolant system with a high-pressure 20 bar filter. Additional features include a swarf conveyor and Renishaw touch probe. If you are looking to get high-quality milling capabilities, consider the DMG ecoMill 800 V machine we have for sale. Contact us for more information. Hfsdpfjx D H Dhox Afnsc • Tool magazine capacity: 30 stations Additional equipment • Coolant system with filter, high-pressure 20 bar • Coolant tank capacity: 600 l • Swarf (chip) conveyor • Renishaw OTS • Renishaw touch probe

Condition: ready for operation (used), Year of construction: 2005, operating hours: 42,768 h, controller manufacturer: HEIDENHAIN, spindle speed (max.): 18,000 rpm, number of axes: 5, This 5-axis DMG DECKEL MAHO DMU 50 eVo linear was manufactured in 2005. It features a HEIDENHAIN control, a 40bar IKZ, a 60-tool magazine, and a spindle speed of 18k rpm. The machine includes automation capabilities fully adjustable for different product formats and positioning. If you are looking to get high-quality milling capabilities, consider the DMG DECKEL MAHO DMU 50 eVo linear machine we have for sale. Contact us for more information. • Tool magazine: 60 tools Hsdpsx Rd Hpefx Afnsfc • Through-spindle coolant (IKZ): 40 bar • Spindle overhauled in 2024 • B and C axes overhauled in 2024 Additional equipment • Automation (product handling), freely adjustable for product format and positioning • Paper belt filter • Blum laser tool break detection • Extraction system excluded Technical Specification Taper Size SK 40