Used Debarking for sale (99)

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Log yard with restacking unit Complete log handling system from the log receiving area to the transfer to the debarking line. The system performs automatic log handling, singulation, end trimming, metal detection, butt end reduction, debarking, 3D measurement, and sorting of the logs. Ndodezvyl Ajpfx Abyjc Key technical data Capacity: approx. 30,000 m³ of logs in a single-shift operation Log diameter: approx. 160–660 mm Log lengths: 4,000–5,250 mm Special lengths up to 6,100 mm Long logs up to approx. 20 m Herzog processor head with 55 kW hydraulic unit End trimming diameter up to approx. 700 mm Integrated metal detection Hobest Primus butt end reducer for log diameters up to 900 mm EWD ER 90 debarker with rotor opening 100–900 mm Rotor drive: 45 kW, frequency-controlled Feed speed during debarking up to 30 m/min Calibrated Microtec 3D log scanner Sorting block conveyor with five hydraulic discharge stations The restacking unit automatically returns, singulates, and realigns the logs for feeding to the debarking line. It consists of, among other things, an approx. 18 m long log handling conveyor, a four-stage inclined conveyor, a 90° curved conveyor, a double-strand block conveyor, a transverse conveyor, and an integrated log turner. The restacking unit can be purchased separately if required.

Condition: refurbished (used), functionality: fully functional, year of last overhaul: 2025, 1) Log Yard with 10 Boxes (Drop Boxes) – New and Used Log Feed and Sorting Line New Feed rate 50 m/min. as well as the following used components: Comprising: New cross feed conveyor, step feeder Used log transfer carriage, Used log transfer carriage with ejector, Used Cambio 50 debarker, Used split detection unit with belt, Measuring section, sorting log carriage. Including debarking; Inspection and Painting; including log infeed. Without boxes, sheet metal cladding, measuring system, discharge control, or control cabinet. Root reduction. 2) Log Infeed for Canter Line Ndsdsykr Aqjpfx Abyec Heavy-duty cross log conveyor NEW Cross log conveyor in 4-strand execution Axle spacing: 7.5 m Total length: 8.0 m Drive shaft: 100 mm diameter Chain: Bush conveyor chain, pitch 100 mm – heaviest version Fixed rear stops, without sheet metal cladding Steel substructure: HEB 200 Construction height: 1000 mm Drive: geared motor 7.5 kW 3) Equalizer NEW Number of chains: 4 Axle spacing [mm]: 3500 Overall width [mm]: 5730 Paddle spacing [mm]: 1000 Drive shaft diameter [mm]: 100 Drive SEW [kW]: 7.5 Speed [m/min]: 10 Design: completely sheet metal covered between chain runs 4) Step Feeder NEW Feed steps: 4 Overall width [mm]: 4200 Plate thicknesses [mm]: moving steps 12 mm, fixed steps 20 mm Drive SEW [kW]: 18.5 Drive via crank mechanism and geared motor 5) Canter Line (WD brand) Log transfer carriage before RB 2 infeed Length extension to 18.5 m – drive and deflection RB 2 infeed with powered steel chain bed, designed for lateral log infeed. Conveyor chain with carrier dogs, frame in welded construction. Intake and centering unit ZE with log rotation unit TDV and centering device. Feeding unit ZE Log length: 2.5 – 5 m Clear width: min. 80 mm Clear width max.: 780 mm Construction height: 1000 mm Weight: 5400 kg Profile canter FZ 3 Machine frame with base frame 2 knife head housings with main shaft bearing, 2 knife heads with finishing segments, Drive power 90 kW Log diameter: min. 100 mm, max. 400 mm Chipping height above the chain max. 515 mm Distance between disks max. 570 mm Distance between disks min. 60 mm Disk diameter: 1260 mm Positioning via electric motors 2 hydraulic units 35 kW hydraulic pre- and post-cut Pre-cut square timber turning device Electrically powered roller conveyor TR 800 Centering and feeding unit ZE with FZ 3 canter

Year of construction: 1994, condition: good (used), Baljer Zembrod root reducer Nsdpfx Aon Skz Tsbyjdc with radio remote control

Condition: new, Year of construction: 2021, functionality: fully functional, overall weight: 600 kg, workpiece diameter (max.): 40 mm, Round Log Profiling Machine | Log Milling Machine | Log Shaper For sale is a round log profiling machine designed for processing tree trunks. This machine – also known as a round log milling machine or log shaper – enables the production of round log components for log home construction, landscaping, and creative woodworking projects. Description A round log profiling machine for machining tree trunks, ideal for log home construction and demanding timber structures, is offered for sale. The machine performs precise processing of round logs in several coordinated work steps, resulting in perfectly fitting components for natural log houses, log cabins, or structural timber projects. Processing Steps Ndsdpfxeyr E Ezs Abyjc The machine performs several operations in a single process: - Debarking Removal of bark and preparation of the log. - Shaping Uniform rounding and contouring of the log. - Contour and Longitudinal Milling Milling of profiles and contours along the entire length. - Milling of Installation Grooves Thermal barrier / moon groove for precision log house assembly. - Cutting Notching for sockets or joints at 90-degree angles. - Finishing A complete log is processed in approximately 30–40 minutes. Applications - Log house construction - Natural log buildings - Round log structures - Timber constructions Advantages - Multiple work steps in a single machine - Precise processing along the entire log length - Ideal for small to medium production volumes - Electric drive systems Target Users - Log home builders - Timber framers - Timber construction companies - Round log specialists Accessories - Spare cutterhead - Knife set - Knife sharpening machine - Spare parts kit Inspection Inspection possible by appointment. Further information and technical details available on request. The sales price refers to the complete machine including accessories! Keywords: Round log milling machine, log shaper, round log machine, round log profiling machine, log milling machine, timber log milling machine, round log profiler, round log processing machine, log house machine, round log processing unit, post milling machine.

Condition: used, Year of construction: 2005, functionality: fully functional, cutting length (max.): 6,500 mm, input voltage: 400 V, - Year of manufacture: 2005 - Electrical diagram - Electric motor: 15 kW - Log cutting length: up to 6.5 meters - Control: stationary control panel - Additional equipment: - Hydraulic loading Nedpfx Absyrdg Dsyodc - Hydraulic hold-down - Hydraulic log turner - Roller adjustment - Debarker (for removing bark prior to cutting) - Dual-function hold-down - Side stops - Leveling rollers Machine dimensions: - length: 750 cm - width: 220 cm - height: 240 cm - weight ~1700 kg

Condition: used, Year of construction: 2026, functionality: fully functional, feed rate Y-axis: 700 m/min, CAMBIO 66 roundwood debarker with CAM TOOL knife system. Equipped with mechanical rotor. Comes with centering conveyor and additional rollers after the debarker. In full working order after major overhaul. Njdpfxotcu Uas Abyjdc

Year of construction: 2026, condition: new, The Rotary Log Debarker delivers fast, uniform debarking with high throughput and minimal material loss. Its continuous rotary design ensures stable operation, reduced downtime, and lower maintenance costs, making it ideal for high-volume industrial production. Built for harsh environments, it provides reliable performance, improved downstream efficiency, and predictable operating results. For detailed information please contact us Ndjdpfx Abeym A Trjyoc

Condition: new, Year of construction: 2023, Round tree debarker CAMBIO 45 AIR TEN.CAMBIO 35.VK-450.Debarker will be sold after overhaul.Debarker will be equipped with new generation knives. The machine can be sold as part of debarking lines. Which consists of 1. Table for unbarked logs 2. Hydraulic log splitter. Nedpoiqi S Nofx Abyedc 3. Feed conveyor. 4. Scraper bark conveyor. 5. Outgoing conveyor with log dumper to the left side. 6. Pocket for debarked logs. All equipment is new

Condition: used, Year of construction: 1992, functionality: fully functional, power: 330 kW (448.67 HP), control type: PLC-controlled, actuation type: hydraulic, For sale is a used Quattro Spaner bandsaw, Super 40 model, manufactured in 1992, consisting of: - Spaner - Centering unit - 4-bandsaw system Super 40 This system is particularly suitable for the efficient cutting of light to medium-strength round timber and enables precise and efficient processing in a compact design. Technical data: Max. round timber diameter: 58 cm → Debarking up to 42 cm Min. round timber diameter: 13 cm → Debarking up to 8 cm Feed rate: up to approx. 59 m/min → Reduced to approx. 20 m/min for large cross-sections Daily output: approx. 250–300 cubic meters/day → Depending on round timber diameter and cutting Condition and previous use: The system was in operation at a sawmill with an annual production of approximately 50,000 cubic meters in a single-shift operation until summer 2025. It was regularly maintained until it was taken out of service and was fully functional. However, due to its age and for reliable long-term operation, a complete overhaul is necessary. An inspection of the system for sale is possible by arrangement. An identical Quattro system, which has already been completely overhauled, can be inspected on-site during ongoing production. This allows interested parties to gain a clear picture of the system's performance and potential applications after an overhaul (see photo). Price on request. We will gladly send further technical information as well as photos and videos upon request. Ndjdpezvx Shsfx Abysc Inspection is possible after prior appointment.

Condition: new, Year of construction: 2026, Electric Motor 22 kW Cutting Dimensions Max. log diameter 105 cm Max. log length 6.1 m Njdpozqz Sgjfx Abysdc 7.9 m (with BX6 bed extension) 9.7 m (with BX12 bed extension) Min. log length 1.8 m Clearance between rollers 84 cm Max. cutting width (cant) 78 cm Max. cutting height above the blade 34 cm Max. width of clamped material 66 cm Min. width of clamped material 5 cm Max. log weight 2.5 t Head Equipment Automatic thickness setting device (Setworks) Industrial PLC controller Head feed up/down Electric (Servo) Head feed forward/backward Electric Blade guide arm Electric (joystick controlled) Blade cleaning system LubeMizer Blade tensioning system Hydraulic with air cushion Debarker Optional Chip outlet diameter 150 mm (6") Head Features Board discharge system Laser Blade Length 5000 mm Width 38 mm 50 mm (Optional) Blade guide wheels Diameter 600 mm Type With flange-pressed and brush belt Material Cast iron Bed Equipment Bed construction Single-sided head guide system Cribbing beds Standard Bed extension BX6 bed extension: 1.8 m BX12 bed extension: 3.6 m Bed Features Board conveyor belt Shock-absorbing roller Log maneuvering kit Industrial hydraulics Center clamp with two bars 2 double-sided clamping devices (optional) 2 two-way chain log turners 2 driven leveling rollers 3 stoppers on two bars 7.5 kW hydraulic unit

Condition: new, Year of construction: 2026, Engine Electric 30 kW Electric 37 kW Electric 45 kW Cutting dimensions Max. log diameter 105 cm Max. log length 4.5 m (Bed S) 8.4 m (Bed L) Up to 12 m (non-standard) Clearance between rollers 90 cm Max. cutting width (cant) 85 cm Headstock equipment Ndjdpfx Aezqz T Rsbysc Automatic cutting thickness adjustment device (Setworks) Industrial PLC controller with automatic mode Headstock up/down feed Electric (Servo) Headstock forward/backward feed Electric Saw blade guide arm Electric (joystick controlled) Saw blade cleaning system Automatic oil mist lubrication with pneumatic assistance Saw blade tensioning system Electric hydraulic with pressure accumulator Debarker Optional Chip outlet diameter 150 mm (6") Headstock features Four cameras Board discharge system Additional options Laser Saw blade Length 6270 mm Width 50 mm 75 mm (Standard) 100 mm 120 mm Saw blade guide wheels Diameter 800 mm Type Beltless Material Convex cast iron Bed equipment Bed structure Dual-sided headstock guide system Bed features Board conveyor belt Shock-absorbing roller Additional options Saw-following conveyor Log maneuvering kit Industrial hydraulics 1 or more log clamps on two rods 1 or more bidirectional chain turners 2 or more driven leveling rollers 2 or more stops 7.5 kW or 11 kW hydraulic unit

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Log handling line, LINCK sawmill line, lumber sorting line with stacking system Log handling line: - Infeed - Cut-to-length - Turner - Emergency outfeed channel, possibility of log discharge - Root flare reducer (butt reducer) - Valon Kone debarker - Metal detector - Hellak DLV 720 - Log sorting line - 32 boxes LINCK sawmill line: LINCK Canter V40, year 1997 • Max. roundwood diameter: 650 mm • Min. roundwood diameter: 100 mm • Max. log length: 6 m • Min. log length: 3 m • Feed speed (30-80Hz): 25-70 m/min • Cutter head drive power: 90/132 kW • Number of knives: 3 • Cutting depth: 160/200 mm LINCK Multi-rip saw CSMK 375-A3/B3, year 1997 • Min. timber length: 3.00 m • Min. cutting thickness: 50 mm • Max. cutting thickness: 375 mm • Feed speed (frequency controlled): 25-70 m/min • Saw diameter: 648 mm • 648x5.7/3.5/6.8x160 Left • 648x5.7/3.5/6.8x160 Right • 648x5.7/3.5/x165 Plate • Shaft speed: 2500 rpm • Drive power per saw shaft: 110 kW • Weight (with motors): 18800 kg LINCK Turner DV 55, year 1996 • Feed speed: 36.2 m/min • Max. log diameter: 550 mm LINCK Canter V30, year 1996 • Max. roundwood diameter: 500 mm • Min. roundwood diameter: 100 mm • Max. log length: 6 m • Min. log length: 3 m • Feed speed (30-80Hz): 25-70 m/min • Cutter head drive power: 90/132 kW • Number of knives: 2 • Cutting depth: 160 mm LINCK Milling unit VP34 • Min. timber length: 3 m • Max. timber length: 4900 mm • Max. milling depth: 50 mm • Max. cutting height: 120 mm • Min. board width: 60 mm • Feed speed (50Hz): 41.7 m/min LINCK Saws S2 VS 66 S • Min. timber length: 3 m • Cutting height with inner saw: 280 mm • Cutting height with outer saw: 280 mm • Feed speed: 36 m/min • Saw diameter: • 505x5.2/3.6/6.8x120 mm Left • 505x5.2/3.6/6.8x120 mm Right LINCK Multi-rip saw S3 VSV 80-A, year 1988 • Min. timber length: 2.50 m • Cutting height: 280 mm • Feed speed: 40 m/min • Saw diameter: • 510x5.2/3.6/6.8x120 mm Right • 510x5.2/3.6/x120 Plates LINCK Horizontal saw KH1, year 1985 • Min. timber length: 3 m • Min. cutting height: 60 mm • Max. cutting height: 140 mm • Max. cutting depth, right saw: 140 mm • Max. cutting depth, left saw: 140 mm • Min. cutting depth: 130 mm • Feed speed: 40 m/min • Saw diameter: 520x5.8/4.0x150 mm Lumber sorting: Lumber sorting by length, width and thickness 32 boxes for lumber Nodpfxsyyd Tno Abyedc Stacking and bundling system for lumber packs The offered line has a real capacity of approximately 70 000 m3 - 110 000 m3 per year in one-shift operation. Huge spare parts inventory. Sharpening room. We offer complete service from sale to installation and commissioning in the new location. For an additional fee, professional dismantling, loading and commissioning in the new location are possible.

Condition: excellent (used), functionality: fully functional, ARI high capacity line for big logs Log deck 2 sections Step feeder Log conveyor Debarker infeed (Remill) Debarker Cambio 90-75/6 (or a Cambio 500) 2d scanner for reject boxes Log conveyor with 2 reject boxes Log conveyor, kickers to the left Buffering deck and step feeder Log conveyor Rema 3d scanner AriVislanda LT2 auto log turner 2006 AriVislanda LI-600 log centering infeed 2006 AriVislanda RL-600 Reducer AriVislanda QSS-700 Saw 2011 AriVislanda VFW 600 L 2011 Ndjdpfx Abswp E Tnoysc AriVislanda board separator 2006 Block tilt AriVislanda block infeed type Nils AriVislanda RC-600 Reducer Ingvar Persson turn table AriVislanda 500A Infeed AriVislanda 509-7F Multirip AriVislanda boardseparator Beltconveyor Dual Edging lines Söderhamn (1 left 1 right) 2 x 300 m/min Cross conveyors Söderhamn Elevator Söderhamn 483 Scanners Söderhamn 528 Infeed Söderhamn 5100 Edger Söderhamn 5400 Edger outfeed with reject displacement EdgeIT system

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 09001M, type of input current: three-phase, cutting length (max.): 10,000 mm, overall weight: 50,000 kg, cutting height (max.): 700 mm, total length: 38,000 mm, input current: 125 A, Complete sawmill with chipper and debarker, including sawdust turbine. For sale: a complete and fully operational KARA Master sawmill—an efficient and robust solution for professional timber processing. The sawmill operates on a 125 Amp electrical supply and is fully functional. It can process logs with diameters up to 70 cm and lengths of 10-11 meters. The sawmill features fully adjustable thickness settings along a rail system, allowing you to pre-set various cutting thicknesses as required. Cutting depth ranges from 13 mm up to 315 mm, enabling production of everything from thin boards to heavy beams—precisely and efficiently. Nsdpfx Asxz Eg Nobysdc The system is equipped with a debarker to protect the saw blade and ensure clean, uniform cuts. For handling residual materials, a chipper is included to facilitate the easy and practical disposal of wood waste. Finished timber can be sorted into three separate stacks, promoting an organized and streamlined workflow. This machine is ideal for larger sawmills and timber companies seeking high-capacity and flexible production. Disassembly and transportation of the sawmill is the responsibility of the buyer. Estimated transport dimensions are 12.5 x 2.5 x 3 meters (L x W x H) per truck, with a total of 3-4 truckloads anticipated.

Condition: good (used), Engine: 18.5 kW Cutting dimensions Njdpfexhb Uvjx Abyedc Max log diameter: 95 cm Clearance between rollers: 73 cm Max cutting width (cant): 64 cm Max cutting height above blade: 39 cm Max cutting length: 12 m Head unit equipment Automatic cutting thickness adjustment device Head feed up/down: Electric Head feed forward/back: Electric Blade guide arm: Electric Blade tensioning system: Hydraulic with air cushion Debarking unit Sawdust extraction opening diameter: 150 mm Blade Length: 4670 mm Width: 38 mm / 50 mm Blade guide wheels Diameter: 600 mm Type: With belt Material: Cast iron Full hydraulics

Condition: used, Haewa Debarker Type H249 / 800 - Debarking head: working width 300mm, impact bars, impact knives, and guide ring - Debarking head equipped with carbide inserts Nodpodfd R Tofx Abyjdc - Feed rollers 1000mm - Log diameter 0.25m – 1.25m - Log length 1.5m – 6.0m with control cabinet and complete documentation

Year of construction: 2020, condition: new, Häwa root reduction unit, NEW Type H 276 / 800 Trunk diameter 0.2m – 1m (root collar 1.2m) Trunk length min. 2.4m - 5m (longer lengths also possible) Ndodpsfccp Hjfx Abyoc Total weight 5t Total power consumption 45kW with wireless remote control

Condition: excellent (used), functionality: fully functional, Söderhamn small log line with Euromill profiles Debarker Cambio 45 with infeed and guide work after 2D scanner Söderhamn 447 infeed 240-12 chipper canters Block tilt and infeed Nedjwp E E Dspfx Abyodc 240-12 chipper canter Euromill profiles Board separator with adjustable center Chip conveyor under saw line Hydraulic units and electrical cabinet.

Condition: new, Year of construction: 2023, Debarker reducer disc with 5 or 6 knives, diam range 200, 300, 400 mm Njdpfx Abekhcx Sjysdc

Year of construction: 2024, condition: new, The UMG-401.17 equipment set is designed for feeding logs with a diameter of 120–600 mm and a length of 2500–3200 mm to woodworking equipment for further processing. This unit includes a Bruks BR1450 log milling machine and a Valan kone VK100 debarker (adapted to birch wood), a Vecoplan VAZ2000 bark shredder. Safe platforms and stairs around the entire equipment unit ensure convenient access during machine maintenance. The Valan kone debarker is protected from environmental influences by a metal frame house. The line throughput before the debarker is 12 pcs/min, after the debarker feeding to the cutting line is 28 pcs/min. Nsdpfxsv Uh N Ds Abyodc

Condition: used, Year of construction: 1998, operating hours: 18,500 h, functionality: fully functional, machine/vehicle number: 1250, VALON KONE – Log Debarking Machine with Complete Equipment For sale: Valon Kone industrial log debarking machine, suitable for professional wood processing and sawmill operations. Ndsdpjz Rq Enefx Abysc Equipment included: * Valon Kone log debarker * Log infeed conveyor * Complete log sorting system * Additional associated equipment The machine is designed for efficient log debarking and integration into industrial wood processing lines. Condition: Used Location: Montenegro, Europe The debarker, infeed conveyor and log sorting system are offered for sale together. For further technical information, photographs and pricing, please contact us. Seller: Pelengić Trade d.o.o

Condition: new, Year of construction: 2026, travel -z axis 1200 mm travel -x axis 360 mm Weight 3250 kg NESTO 4 Axis Pro Cnc Wood Lathe Machine Nodpfx Ajyk Ia Ssbyodc TECHNICAL SPECIFICATIONS - Work Piece Dimension Max Diameter 360 mm - Max length 1200 mm - Control Unit TPA Control Unit (ltalian) - Z Axis Movement 1200 mm - X Axis Movement 360 mm - Long Axis Speed (Z) 70 m/min - Short Axis Speed (X) 30 m/min - Vertical Axis Speed (Y)20 m/min - Lathe RPM 4500 rpm (Direct Drive) - lnstalled Power 20 KW - Lubrication Unit ILC Automatie Lubrication - Piece Clamping Pneumatic Piston (7 Bar) - Piece Length AdjustmentEasy adjustment with remote control (keyless, boltless) - Cutting Blade Hardened Triangle Blade Made of Special Steel - Cutting Blade Hardened Rounded Blade Made Of Special Steel - Cutting Blade Debarker Blade - Spindle Motor ATC (Automatie tool changer) 24000rpm spindle (5 Pcs tool changer) - Drawing Program ltalian Cad-Cam Program Special for Our Machine (Pegasus 4 Axis Cad & Cam Program) - Machine Dimension Length: 3870mm * Width:2450mm * Highest: 2150mm - Weight 3250 kg GENERAL SPECIFICATION High-resolution Panasonic Japanese servo motors are used in our machine. The axis that rotates the part has the "Direct Drive" function and can work with a 5 kW servo motor at 4500 rpm. Precision ball screws and nuts are used in all axes. Workpiece length setting can be adjusted with a single knob. This ensures time savings and long-term linearity of the tailstocks. The control unit has a remote control function. In addition, with functions such as job sequencing, detailed reports and display of the three- dimensional state of the workpiece, the TPA control offers the user great convenience. Structure Of Chassis With its reinforced, vibration-free and stable chassis design, it provides accuracy over long production cycles and remains reliable for your machining needs. lt has an impressive frame design that provides reliable precision in operation. Ax1s Movements All axes are driven by servo motors. They allow precise acceleration at high speed. High quality and high precision rails, carriages and racks are used to prevent the movement of the axes from being affected by the slightest vibrations. Central Automatie Lubrieation Unit Automatie Tool Measurement Unit lt is a unit that makes an automatic measurement to measure the length of the cutter located at the end of the spindle motor and milling in the Z axis with the correct dimensions, and can store this information through the control unit. lt offers a convenience that eliminates the need for the user to enter measurements during the change of cutter. Tpa Control Unit (ltalian) TPA control unit has Windows based industrial computer. lndustrial computers enable trouble-free operation in the most demanding conditions. Main features of TPA Controller: lt has Ethercat communication system. -Detailed reporting is available. -lt provides ease of use thanks to its specially designed interface. Thanks to its built-in wireless feature, it allows remote access by connecting to the internet. In this way, you can receive your after­sales support needs instantly from our after Sales Team. CAD/CAM SOFTWARE/ PEGASUS CAD & CAM Cad/Cam Software/ Pegasus Cad & Cam lt is a specially designed Cad Cam program to be used in our machine. Pegasus Cad Cam Drawing program is a versatile software that can be used by designers and engineers to create, modify and analyze 3D models. This softwa...

Condition: new, ✔ Band sawmills ✔ Multi saws ✔ Edge cutters ✔ Milling machines for pallet boards ✔ Wood cutters Why Boldrew? ✅ Over 30 years of experience in the industry ✅ Professionalism and precision ✅ Customer service in Europe, America and Africa We invite you to cooperate! Mobile band sawmill TS-1200 H Mobile band sawmill TS-1200 H Innovative technology for woodworking professionals The mobile band sawmill TS-1200 H is a technologically advanced machine designed for efficiency, precision and reliability. Thanks to its mobility and modern hydraulic solutions, the machine will meet the expectations of even the most demanding users. --- Technical data ·Length of the cut log: 100–820 cm Track bed: 6 meters, with an additional 4 meter long hydraulically folding segment ·Diameter of the processed log: up to 950 mm ·Band saw guide wheels: Ø 600 mm Band saw: ·Length: 4800 mm ·Width: 40-50 mm ·Main engine: Briggs & Stratton Vanguard V-Twin 35 HP combustion engine ·Generator: 8 kW to power additional components ·Head lifting system: Double-sided chain drive 16 B ·Feed control: Stepless adjustment for maximum control ·Saw tension: Hydraulic ·Debarker for the first log preparation ·ISP 10 cutting thickness gauge ·Electrically operated roller ·Adjustable Angle supports (load capacity 600 kg each) ·LED lighting, ideal for working in different conditions --- Advanced hydraulic kit The efficient hydraulic system allows easy and quick handling of the logs: ·Hydraulic support arms - stabilization of the log during cutting Log loading - 2 individual cylinders for operator comfort ·Wood leveling - 2 adjustment points ·Log pressure - 2 points for precise clamping ·Chain turner - 2 points, facilitates handling of the log ·Hydraulic motor: 8 kW Briggs & Stratton combustion engine with efficient hydraulic pump Mobility and durability Mobile axle: Double ALKO with brake and height-adjustable drawbar Construction: Solid and resistant to difficult working conditions Transport: Easy thanks to mobile chassis and compact dimensions Advantages of Trak A-1200 M 1. Versatility: Ability to cut large logs with different diameters and lengths Ndjdsvvw R Tjpfx Abyoc 2. Mobility: Perfect for working in sawmills and directly in the field 3. Efficiency: Fast and precise cutting thanks to modern hydraulic systems 4. Operator comfort: Intuitive controls and ergonomic solutions

Condition: used, Year of construction: 1998, operating hours: 18,500 h, functionality: fully functional, machine/vehicle number: 1250, total width: 600 mm, total length: 600 mm, Equipment: 4th hydraulic function, VALON KONE – Log Debarking Machine with Complete Equipment For sale: Valon Kone industrial log debarking machine, suitable for professional wood processing and sawmill operations. Equipment included: * Valon Kone log debarker * Log infeed conveyor * Complete log sorting system * Additional associated equipment The machine is designed for efficient log debarking and integration into industrial wood processing lines. Condition: Used Ndodpfx Abez Rq Eheyec Location: Montenegro, Europe The debarker, infeed conveyor and log sorting system are offered for sale together. For further technical information, photographs and pricing, please contact us. Seller: Pelengić Trade d.o.o