Used Ctp Setter for sale (167)

Condition: good (used), Year of construction: 2013, Turning diameter 376mm, turning length 760mm, bar capacity 76mm, Y axis -/+ 52.5mm, C axis 0.001 degrees on both spindles, 12 station turret, 22KW Motor, Main spindle 4000rpm, sub-spindle 4500rpm, Klsdpfx Aoxv Svmsg Usl 3 jaw chucks, swarf conveyor, tool setter, magazine barfeed unit.

Condition: excellent (used), Year of construction: 2017, 533mm max. machining diameter, 584mm cutting length, 3,200rpm spindle speed, 102mm bar capacity, 12 station turret, 4,000rpm milling speed, Kedjxugtkjpfx Ag Ujll Y axis -/+ 51mm, 40Hp spindle motor, HAAS control, 254mm, 3 jaw chuck, tool setter, swarf conveyor, coolant, Tailstock, Magazine barfeed .

Condition: like new (used), Year of construction: 2024, Traverses X Y Z: 762 x 508x 508, Table 914 x 457mm, Spindle speed 0 – 12,000rpm, Spindle taper BT40, Spindle Motor 22Kw, Klodpfx Agsv Tah Ae Ujl HAAS Control, 30 Station ATC, through spindle Coolant , Low Volt light, swarf auger, spindle probe, tool setter

Condition: good (used), Year of construction: 2009, 750mm Swing, 540mm max. machining diameter, 1020mm max turning length, 5000rpm main spindle, 5000rpm Sub spindle, 65mm bar capacity, 12 station lower turret, 12000rpm milling 18.5kW, 22kW spindle motors, Kedpfxsw Npz Ij Ag Usll FANUC 3iTB control, 3 Jaw Power Chucks, tool setter, Swarf Conveyor, Coolant

Condition: good (used), Year of construction: 2015, Traverses XYZ: 762 x 508 x 508mm, Klodpekticxsfx Ag Uol 500mm Diameter table, max table weight 300kg, table tilt +120°, -35°, 22.4kW, 12000rpm, CT40, 40 station tool changer, coolant, Tool Setter, Programmable coolant, swarf conveyor,

Condition: excellent (used), Year of construction: 2020, Swing 533mm, 298mm max. machining diameter, Ksdpjvygv Hjfx Ag Uoll 572mm cutting length, 3400rpm spindle, 76mm bar capacity, 12 station turret, Y axis -/+ 50.8mm, 22.4kW spindle motor, HAAS control, 254mm 3 jaw chuck, tool setter, swarf conveyor, coolant, Tailstock,

Condition: good (used), Year of construction: 2015, Swing over bed 720mm, maximum machining diameter 420mm, maximum machining length 1274mm, bar capacity 77mm, spindle speed 4,000rpm, milling speed 4,000rpm, Kjdpfxjvgz D Ej Ag Usll 12 station turret, Mazatrol smart control, swarf conveyor, parts catcher, tool setter, and 3 jaw chuck, magazine barfeed unit.

Condition: good (used), Year of construction: 2007, 770mm Swing, 550mm max. machining diameter, 1100mm Distance between Centres, 2000rpm spindle, 116mm bar capacity, 10 station turret 26kW spindle motor, FANUC 21iTB control, Kjdpfx Ajxv Tf Nog Uoll 3 Jaw Power Chuck, Tailstock, Swarf Conveyor, Coolant, tool setter.

Condition: good (used), Year of construction: 2011, 450mm swing, 210mm max diameter, FANUC 0i Control, Klodpfx Aexuhwqog Uel 51mm bar capacity, 12 station turret, 11/7.5kW Spindle Motor, 4,500 rpm, collet chuck, low volt light, coolant, Tool setter, Tailstock, swarf conveyor

Condition: used, Year of construction: 2016, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 330 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Siemens, controller model: 840D, workpiece height (max.): 370 mm, table width: 320 mm, table length: 320 mm, table load: 300 kg, rotational speed (min.): 80 rpm, rotational speed (max.): 80 rpm, overall weight: 9,000 kg, spindle speed (min.): 15,000 rpm, spindle speed (max.): 15,000 rpm, spindle motor power: 31 W, spindle nose: HSK 63A, tool length: 250 mm, tool diameter: 125 mm, tool weight: 8 g, control type: CNC control, Equipment: chip conveyor, Hermle C22U 5 Axis Machining Centre Siemens 840D Control 5 Axis Simultaneous XYZ: 450 x 600 x 330mm 320mm diameter table Maximum workpiece diameter 320mm maximum workpiece height 265mm Maximum table load 300Kg A axis -/+ 135 degrees spindle speed 15,000rpm 55 station tool changer Swarf Conveyor Coolant Tool Setter Kjdpfx Asxpil Sjg Ujll Spindle Probe

Condition: excellent (used), Year of construction: 2010, 412mm max. machining diameter, maximun turning length 753mm, 225 degree movement on B axis, 15HP spindle motor power, 6,000rpm spindle speed, Klodpfxswxw A He Ag Uel 6,000 rpm sub spindle speed, 52mm bar capacity, milling speed 12,000rpm C axis & Milling, 9 station lower turret. Swarf conveyor, tool setter, Coolant, Interlocked guards, Swivelling Universal Head., C Axis (0.001deg), Mazatrol Matrix control

Condition: excellent (used), Year of construction: 2014, Traverses X Y Z: 1016 x 660 x 635mm, Spindle nose to Table: 102 – 737mm, Table 1372 x 635mm, Kledpfep H Tb Nsx Ag Uel Spindle speed 12000rpm, Spindle Taper ISO40, Spindle Motor 22.4kW, HAAS Control with High Speed Machining, 24 Station ATC, Programmable Coolant nozzle, Low Volt light, Swarf auger, Renishaw Tool Setter & Probe

Condition: excellent (used), Year of construction: 2017, Mazatrol Smooth G Control, Bar capacity 65mm, maximum machining diameter 344mm, 2 off 12 Station Turrets, 1325mm between spindles, C axis to both Spindles (0.0001 degree) Y Axis on both Turrets, Spindle Speed 5000rpm, Spindle Motors 22kW, Milling 6000rpm on both Turrets, Swarf conveyor, Tool Setter, Hydrafeed Magazine Barfeed Ksdpfx Aott Nwieg Uell

Condition: good (used), Year of construction: 2012, 750mm Swing, 500mm max. machining diameter, 1300mm max turning length, 3000rpm main spindle, 65mm bar capacity, 8,000rpm milling 20kW, C axis 0.001 degrees, Y axis - 90/+120mm, 40 station ATC, , Ksdpfx Agjxqyg Nj Uell milling speed 4,000rpm, 30kW spindle motors, FANUC 31i control, 3 Jaw Power Chuck, Swarf Conveyor, Coolant, tool setter, parts catcher, barfeed unit.

Condition: good (used), Year of construction: 2020, 400mm swing, 220mm max diameter, 490mm between Centres, Klodpfxoxy Rt Sj Ag Usl Siemens 828 Control, 65mm bar capacity, 12 station VDI30 turret, 17kW Spindle Motor, Spindle Speed 4000rpm, 0.001 degree C axis, +/- 35mm Y axis, 3 jaw power chuck, low volt light, coolant, Tool setter, Tailstock, swarf conveyor

Condition: ready for operation (used), Year of construction: 2002, operating hours: 8,000 h, functionality: fully functional, travel distance X-axis: 900 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, controller manufacturer: fanuc, controller model: 16i MA, table width: 1,000 mm, table height: 500 mm, table load: 700 kg, rotational speed (max.): 20,000 rpm, overall weight: 9,300 kg, spindle speed (max.): 20,000 rpm, operating hours of spindle: 8,000 h, spindle nose: HSK 63A, number of slots in tool magazine: 25, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, High-speed, high-precision vertical machining centre of Japanese manufacture. Furthermore, equipped with the following OPTIONS: MARPOSS wireless 3D workpiece measuring probe, swarf/chip conveyor, high-pressure coolant through the spindle, extended coolant system: 12 nozzles, 100 l/min capacity, electrospindle: 20,000 rpm, 22 kW, HSK 63A taper, with dedicated chiller, tool magazine expanded to 25 positions, FANUC high-dynamic drives (Alpha 22 and Alpha 30), ballscrews cooled by a dedicated chiller, linear optical scales, tool setter (length and breakage detection), active tool load monitoring, ROTOCLEAR on the main door, FANUC SUPER GI option (Geometric Intelligent Control), FANUC RISC option (Reduced Instruction Set Computer), FANUC NURBS option (Non Uniform B-Spline), FANUC DATA SERVER option (160Mb), Kjdpfxjxryb Ne Ag Usll FANUC ETHERNET network port option, serial RS 232 output.

Condition: ready for operation (used), Year of construction: 2014, operating hours: 10,810 h, functionality: fully functional, turning length: 1,000 mm, turning diameter: 300 mm, travel distance X-axis: 235 mm, travel distance Y-axis: 1,144 mm, rotational speed (max.): 4,500 rpm, TECHNICAL DETAILS Turning length: 1,000 mm Turning diameter: 300 mm Spindle bore: 68 mm X-axis travel: 235 mm Z-axis travel: 1,144 mm Turret: 12 stations – all driven Kledox Exqfopfx Ag Usl Spindle speed: 45 – 4,500 rpm Tool holder: VDI 40 MACHINE DETAILS Power-on time: 33,509 h NC run time: 10,810 h Spindle run time: 9,643 h Control: OSP P300L-R Weight: 6,300 kg Required footprint: 3.55 m x 2.35 m x 1.93 m EQUIPMENT Chip conveyor Chuck (diameter: 250 mm) Touch setter Tailstock

Condition: new, functionality: fully functional, Year of construction: 2026, control type: manual, working width: 2,000 mm, bending angle (max.): 135 °, sheet thickness steel (max.): 1 mm, back gauge adjustment: manual, overall weight: 540 kg, total length: 2,400 mm, total width: 850 mm, total height: 1,175 mm, Finger setter with segmented top clamp PNEUMATIC CYLINDER !!! Including manual back stop Max. bending capacity over the entire working length ----- 1.2 mm Max. working length ----- 2000 mm Kjdjga T Dpjpfx Ag Ujll Max. opening width ----- 30 mm Width of fingers ----- 38 | 38 | 50 | 50 | 76 | 101 | 127 | 152 | 203 | 254 | 254 | 254 mm Max. angle of attack ----- 0 - 135 Weight ----- 540 KG Width ----- 2400 mm Depth ----- 850 mm Height ----- 1175 mm

Condition: new, PUMA 5100XLC (2023. 10) 100% NEW Swing over bed: 870 mm Max. Turning Diameter: 650 mm Max. Turning Length: 3042 mm X axis: 362 mm Ksdpex Rxv Ssfx Ag Uell Z axis: 3150 mm RPM: 1000 Spindle: 2-step gear type Spindle thru-hole diameter: 275 mm OPTIONS LIST - FANUC i Series + iHMI - SAMCHULLY MH-224 (24") - 1 Set of Hard Jaws - Tailstock Center Type: Dead Center MT5 - S/R Programmable Twin Type D45-310_SLU5Z - Long Boring Bar Holder - Coolant Pump 4.0kW / 1.45MPa - Coolant Pressure Switch - Coolant Chiller - Coolant Gun - Oil Skimmer - Mist Collector 2.2kW - 12-Station Turret - Right-Side Hinged Chip Conveyor - Bucket - Automatic Tool Setter - Air Gun - Air Blower for Chuck - Signal Tower - Auto Power Off - AICC 200 Block - Arbitrary Speed Threading - Re-machining Function - Threading Repair Function - Stored Pitch Error Compensation (Ball Screw Pitch Error Correction)

Condition: used, _____ Description: Year of manuf. : 2022 Kljdpfjwu I Irjx Ag Usl Control : Okuma OSP-P300 SA Turning diam. : 650 mm Turning length : 1000 mm Main spindle: Technology:Motor spindle Speed:4,200 rpm Power:22 kW Torque:427 Nm spindle bore:91 mm Hollow clamping cylinder:86 mm C-axis:High precision package Chuck:SMW KNCS-N 275-86 K8 Sub spindle: Technology:Motor spindle Speed:5,000 rpm Power:22 kW Torque:420 Nm spindle bore:80 mm Hollow clamping cylinder:77 mm C-axis:High precision package Chuck:SMW BHD-FC 210-52-3 Tool carrier X/Y/Z/B: Technology:Milling spindle Speed:12.000 rpm Power:22 kW Torque:120 Nm Tool holder:HSK 63 Y-axis:250 mm (+/- 125 mm) B-axis:240° Tool magazin: Number of stations:80 Equipment: Measuring systems:Direct in X/Y/Z axis (glass scales) Chip disposal:Chip conveyor Coolant supply:IKZ system, 70 bar Coolant temperature control:Deltatherm E4 Chip rinsing:working area, manual gun Accuracy package:C-axis high accuracy Software package:5-axis auto-tuning Software option:Multifunction tool Gear cutting software package:Gear hobbing, gear peeling Control extension:Dialogue programming Workpiece measurement:Renishaw measuring probe Tool measurement:Tool setter Tool breakage monitoring:Renishaw TRS2 B-axis:NC function and turning function Bar loader:LNS Quickload Servo III+ Automation preparation:Robot interface Work area door:Automatic Set-up mode:Electronic handwheel

Condition: used, Year of construction: 2021, controller manufacturer: Heidenhain, controller model: TNC 640, _____ Description: Year of manuf. : 2021 Control : Heidenhain TNC 640 Speed : 10000 rpm Movement X/Y/Z : 1000/600/600 mm Tool holder : SK 40 In General: Year of manufacture:2021 Control system:Heidenhain TNC 640 Traverse paths X/Y/Z:1 mm Speed:10,000 rpm Spindle: Technology:Belt drive Speed:10,000 rpm Tool holder:SK 40 Media feed-through:Blown air + cooling lubricant Working table: Clamping surface:1,200 x 600 mm Max. table load:750 kg Tool magazin: Technology:Drum magazine Tool changer:Double gripper Number of stations:30 Maximum tool length:340 mm Maximum tool diameter:120 mm Equipment: Measuring systems:Directly in X/Y/Z (glass scales) Chip removal:Chip conveyor Coolant supply:Internal coolant system, 20 bar Workpiece measurement:Touch probe Tool measurement:Tool setter Set-up mode:Electronic handwheel Oil separator:Mechanical skimmer Klsdpfxoxxny Ts Ag Uel Media feed-through Spindle:Coolant + blast air

Condition: good (used), Year of construction: 2004, travel distance X-axis: 1,750 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 600 mm, CNC portal milling machine FPT - STINGER MACH-ID 8829 Manufacturer: FPT Type: STINGER Control: HeidenHain iTNC530 Year of manufacture: 2004 Chip conveyor Laser tool setter Portal Handwheel Full A/B-Automatic head High pressure coolant Specifications Metric US Standard X - axis 1750 mm Y - axis 1400 mm Z - axis 600 mm Table length 1200 mm Table width 1000 mm Table load 5000 Feed X - axis 35000 mm/min. Y-axis feed 35000 mm/min. Feed Z-axis 35000 mm/min. Tool holder Klsdpfx Agjuni D Es Uol HSK 63 ISO/Bt/Mk Spindle power 25 kW spindle speed 18000 rpm Tool changer 30 IKZ 20 Number of controlled axes 5 Chip conveyor Yes Cooling device Yes Dimensions (estimate) length 6000 mm width 4000 mm height 3850 mm weight 21000 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: used, Year of construction: 2017, operating hours: 1,400 h, functionality: fully functional, travel distance X-axis: 1,450 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 550 mm, rapid traverse X-axis: 42 m/min, rapid traverse Y-axis: 42 m/min, rapid traverse Z-axis: 42 m/min, spindle speed (max.): 14,000 rpm, CNC Heidenhain 640 Kledpfx Agsya Imqj Uel WORKING AREA: X-axis: mm 1.450 Y-axis: mm 700 Z-axis: mm 550 Rapid traverse (X/Y/Z): m/min 42 Max. spindle speed: Rpm 14.000 Tool holder: SK 40 Tool magazine capacity: 30 Table size: mm 1.760 × 750 Max. table load: kg 2.000 Equipped with: • HEIDENHAIN 640 CNC • DXF file reader • Preparation for the fourth axis • Tool setter • Heidenhain workpiece measuring probe • 40 bar through-spindle high-pressure coolant system with paper filtration tank, 600-liter capacity • Air conditioning unit • 30 position tool magazine • Instruction manuals and CE declaration

Condition: new, Year of construction: 2026, 1. Xitron Navigator Harlequin-RIP/workflow-Kit (TIFF-only) v.14.xx LDK-version with USB-dongle Klsdodhn Dtepfx Ag Uol 1-bit-tiff-RIP incl. software download and license code for all CtP-Systems with 1-bit-tiff shooter 2. Xitron Navigator Harlequin-RIP/workflow-Kit v.14.xx LDK-version with USB-dongle 1-bit-tiff-RIP incl. software download and license code USB-BlueBox-Interface for nearly all CtP-Systems without 1-bit-tiff shooter 3. RasterBlaster 1-bit-tiff shooter All offers subject to prior sale

Year of construction: 2011, condition: ready for operation (used), - USED - TRAVELLING COLUMN CNC MILLING MACHINE WITH ROTARY AND SHIFTING TABLE LONGITUDINAL TRAVEL: 8000 mm TRANSVERSAL TRAVEL: 1500 mm VERTICAL TRAVEL: 2500 mm RAPID FEEDS L-T-V: 35 m/min TABLE SIZE: 2000 x 2000 mm Klodjwl R Agopfx Ag Uel TRANSVERSAL TRAVEL OF THE TABLE: 1500 mm HEAD: A/B AXIS AUTOMATIC ; CONTINUOUS ; ISO 50 ; 7000 rpm; 49 kW; 1180 Nm TOOL MAGAZINE: CHAIN-TYPE ; 80 POS CONTROL UNIT: HEIDENHAIN iTNC 530 ACCESSORIES: SWARF CONVEYOR ; LASER TOOL SETTER ; PORTABLE HANDWHEEL NOTE: WITH ROTARY TABLE 1500X1500 mm