Used Cmc for sale (21)

Condition: new, Year of construction: 2025, fuel type: diesel, Drivetrain Make of engine: Kubota Weights Empty weight: 1.605 kg Functional Mast: articulated arm Lifting capacity: 230 kg Working height: 1.300 cm Other information Emission level: Stage V / Tier V Isdpfsrbwwwjx Ag Doa Max swing of arm in degrees: 360 Max swing of platform in degrees: 90 Rental currency: EUR Production country: IT Additional information Please contact Jan De Lepeleer for more information

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, empty load weight: 320 kg, CMC ITALIA COVERMAKER Model: LPS (50 x 70) Semi-automatic case maker for the production of book covers. Hot glue mounting for board and packaging It will also work with cold adhesive. Cover papers: 100 - 170 gsm Cover boards: 1.5mm - 4.0mm Isdpfju Ivx Dsx Ag Doa Power requirements: 400 volt - 2kw - 50Hz Weight: 320 kgs Year of construction: 2005 Fully working order. Specification: Min size: 12mm x 15mm Max. size turned edge: 50 x 70mm Max. size edge-to-edge: 52 x 74mm Minimum Height of Case 105 mm Paper thickness 100g/m2 – 170g/m2 Board thickness: 1.5mm – 4mm Electrical requirement: 400/440v - 2.0 Kw - 3 phase + neutral External air supply requires: 6 bar pressure Dimensions: length 3100mm (including delivery tray), Height 1200mm (including storage shelf), Width 1050mm.

Condition: ready for operation (used), CMC MTE2620-169BF PM Servo Motor, serial no. according to photo, used, normal signs of wear, 100% functional, scope of supply according to photos Isdoi D Hn Aepfx Ag Dsa

Year of construction: 2012, condition: ready for operation (used), A Cevenini roll slitting machine for adhesive tapes and foam adhesive tapes is available. Carrier width range: 0.4mm-280mm, knife diameter: 300mm, knife profile: B, max. mother roll width: 1600mm. Including various accessories such as grinding stones, pressing device, clamping jaws, etc. Documentation available. An on-site inspection is possible. Iodpfx Agoxvrupj Dea

Condition: good (used), Year of construction: 2010, Ref: 10940 . 2010 CMC Q-Cover One Ijdpfev Uqpmjx Ag Doa Semi Auto casemaker that turns-in one side at a time and folds the corners automatically. The cover is then passed into the nip-roller, output on collector table. Equipped with: Huge variety of materials for high-quality cases and covers Lining operations on the same unit Stainless hot & cold gluing unit Automatic viscosity circuit and fast flushing system Case gauge for spine and pages Innovative corner tucking devices Vacuum-suction feeding belts for faster operation Easy-operation touchscreen Adjustable case-collection hopper Accessories: Large size kit for box production etc Specification: Min size: 15mm x 15mm Max. size turned edge: 46 x 78mm Max. size edge-to-edge: 50 x 80mm Minimum Height of Case 105 mm Maximum Open Flat Case 760 x 460 mm Paper thickness 100g/m2 – 170g/m2 Board thickness: 1.5mm - 3mm

Condition: excellent (used), Year of construction: 2007, WITH SHRINK TUNNEL & VIDEOJET Speed: max. up to 10,000 cycles/hour Formats (mm): min. 105 x 148 // max. 250 x 340 Thickness: min. 2 mm, max. 25 mm Counter: 26 million Iedpfov D If Dex Ag Dsa Equipment / Additional information: Processing with film -PE-, PP-, OPP- and PVC-film -Foil thickness min.: 20 my -Film thickness max.: 50 my -Film overlap min.: 30 mm Machine consists of: 1x Autoloader 1x Sliding feeder (for thicker products) 6x Rotary suction feeder 1x Cavalo feeder (landscape format) 1x Welding device (lengthwise & crosswise welding) 1x Videojet addresser 1x Shrink tunnel

Condition: new, Year of construction: 2025, fuel type: diesel, Empty weight: 2.495 kg Mast: articulated arm Ijdpfx Ajwtxbtsg Dsa Lifting capacity: 230 kg Working height: 1.790 cm Max. horizontal reach: 1110 m Rental currency: EUR Production country: IT Please contact Jan De Lepeleer for more information Fully hydraulic, telescopic arm and jib (90°)

Condition: used, Year of construction: 2010, Used Revised Air Compressor CMC CWA11-800 40 bar General Features of the Used Air Compressor CMC CWA11-800 40 bar The Used Air Compressor CMC CWA11-800 40 bar delivers high performance as an oil-free, three-stage unit, ideal for industrial environments that require high-quality compressed air. CMC manufactured this model in 2010 for air compression systems operating at up to 40 bar of working pressure. Since the unit uses dry-running cylinders, it eliminates the need for internal lubrication. Therefore, operators can use it in critical applications where they must avoid any air contamination. Moreover, its robust design ensures long-term durability and operational consistency. Technical Operating Specifications Iodpfx Agewcf Ewo Dja The Used Air Compressor CMC CWA11-800 40 bar operates with three cylinders across two compression stages. It draws air at atmospheric pressure and functions in ambient temperatures ranging from +1 to +35 °C. Consequently, the unit suits various environmental conditions. The system delivers an intake flow rate of 800 cubic meters per hour and reaches a maximum pressure of 42 bar. In addition, a 132 kW (180 HP) three-phase electric motor powers the compressor at 710 revolutions per minute, running on 400 Volts and 50 Hz. As a result, the compressor provides high efficiency and reliability, even under demanding workloads. Cooling System and Thermal Management To maintain optimal temperatures, the Used Air Compressor CMC uses a water-based cooling system for both the cylinders and compressed air. Specifically, copper tube and brass plate heat exchangers dissipate heat in both the intermediate and final compression phases. Furthermore, a gear-driven oil pump circulates lubricant through a dedicated heat exchanger, which enhances cooling performance. Additionally, a preheating resistor stabilizes thermal conditions during start-up. Therefore, the system reduces thermal stress and extends component life. Overall, this combination of cooling solutions ensures optimal efficiency throughout the filtration cycle. Mechanical Equipment and Functional Components CMC designed the Used Air Compressor CMC  with a base frame supported by four anti-vibration feet. As a result, operators can install the unit directly on the floor without additional foundation work. The W-type compressor block features dry cylinders and pistons with PTFE-loaded sealing rings. In contrast to lubricated systems, this configuration prevents oil contamination. Furthermore, stainless steel suction and delivery valves include automatic unloader mechanisms that support load/unload functionality. In terms of transmission, the motor and compressor connect via trapezoidal belts, which simplify maintenance. The intake side also includes a silenced filter, while a protective cage improves operator safety. Safety Devices, Monitoring, and Physical Layout The Used Air Compressor CMC integrates comprehensive safety and monitoring systems.

Condition: ready for operation (used), CMC 3515000M5000TAC-F0 PM Servo Motor, serial no. according to photo, used, normal signs of wear, 100% functional, scope of supply according to photos Iedpoi D Hnmjfx Ag Dja

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, The machine is fully operational. CMC PRATICA poly foil wrapping machine. Year 2009 and not used that much by its former owner. Iedpfx Ajxlgp Tog Doa

Year of construction: 2006, condition: like new (used), Built in 2006 Condition like new! Iodpfxed Hr Nco Ag Dea

Condition: used, machine/vehicle number: 16011, automatische Folieneinschlagmaschine - Wrapping & Shrinking Machines CMC FA-600 BT Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Isdpfjh Axp Nsx Ag Dsa Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: new, Year of construction: 2022, fuel type: diesel, Drivetrain Make of engine: Kubota Weights Empty weight: 2.600 kg Functional Mast: articulated arm Lifting capacity: 230 kg Working height: 1.890 cm Ioderduv Eepfx Ag Dja Other information Emission level: Stage V / Tier V Max. horizontal reach: 950 m Max swing of arm in degrees: 356 Max swing of platform in degrees: 178 Rental currency: EUR Production country: IT Additional information Please contact Jan De Lepeleer for more information

Year of construction: 2001, condition: like new (used), flader brushing machine CMC futura bold x 2 6 agergate WIDE UP AGGREGATE, WIDE DOWN AGGREGATE, LEFT AND RIGHT NARROW AGGREGATE X 4 brushing machine flader CMC futura bold x 2 6 agergate Iodoi A Ivyspfx Ag Dja WIDE UP AGGREGATE, WIDE DOWN AGGREGATE, LEFT AND RIGHT NARROW AGGREGATE X 4 WIDTH 1200 mm smooth feed adjustment inverters

Condition: ready for operation (used), CMC 3528000M5000TAC-CR PM Servo Motor, serial no. according to photo, used, normal traces of use, 100% functional, scope of supply according to photos Iedei D Hnxepfx Ag Dja

Condition: used, Year of construction: 1994, Kreuzleger - Stacker CMC ROBOT 300 PMCYear 1994 Online-Video-Inspection by Skype-Video Iodpfoh Ax Hiex Ag Doa We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 2022, fuel type: diesel, Drivetrain Make of engine: Kubota Weights Empty weight: 2.006 kg Isdpfspz Hn Djx Ag Doa Functional Mast: articulated arm Lifting capacity: 200 kg Working height: 1.500 cm Other information Emission level: Stage V / Tier V Max. horizontal reach: 690 m Max swing of arm in degrees: 360 Max swing of platform in degrees: 90 Transport dimensions (LxWxH): 4,03x0,77x1,98 Rental currency: EUR Production country: IT Additional information Please contact Jan De Lepeleer for more information

Condition: ready for operation (used), CMC 3515000M5000TAC-FO PM Servo Motor, serial no. according to photo, used, normal signs of wear, 100% functional, scope of supply according to photos Iedpfx Agoi D Hnue Dja

Condition: new, Year of construction: 2025, fuel type: diesel, Drivetrain Isdpfx Aspm D R Djg Dea Make of engine: Kubota Weights Empty weight: 3.053 kg Functional Mast: articulated arm Lifting capacity: 200 kg Working height: 2.300 cm Other information Emission level: Stage V / Tier V Max. horizontal reach: 1240 m Max swing of arm in degrees: 360 Max swing of platform in degrees: 180 Transport dimensions (LxWxH): 5,7x0,88x1,98 Rental currency: EUR Production country: IT Additional information Please contact Jan De Lepeleer for more information

Condition: ready for operation (used), CMC MTE2620-169BF PM Servo Motor, serial no. according to photo, used, normal signs of wear, 100% functional, scope of supply according to photos Iedpfx Aoi D Hn Hsg Dea

Condition: ready for operation (used), CMC 3515000M5000TAC-F0 PM Servo Motor, encoder cover has a crack see photo, serial no. according to photo, used, normal traces of use, 100% functional, scope of delivery according to photos Iedpfx Aei D Hnqsg Dea