Used Crimping Pliers for sale (288)

Year of construction: 2001, condition: ready for operation (used), An automatic cutting, stripping, and crimping machine by Metzner for stranded wires and cables is available. Feed rate: 60m/min, cable length range: 160mm-999mm, cable length tolerance: +/-0.5%, max. stripping length 1/2: 70mm/40mm. Conductor cross-section range: 0.14mm²-6mm², outer cable diameter: 6mm, crimping force: 15kN, cutting accuracy per 100mm: +/-0.2mm, throughput: approx. 1200 wires/h. Machine dimensions X/Y/Z: approx. 1650mm/1250mm/1650mm, weight: approx. 400kg. On-site inspection is possible. Bsdpfxsxqgx Ee Abbedk

Condition: used, Year of construction: 2016, Overview  This brewhouse was manufactured in 2016 by Staes (Belgium) and other reputable European suppliers. The system has a maximum brew size of 62 hl and will become available from October 2025. Technical data  Capacity: max. 62 hl per brew Steam heated Scope of Delivery  Wort kettle | Staes | 2016 Whirlpool Wort cooler Malt hopper and electrical cabinet Pre-masher Mash kettle | max. 30 hl volume Heat exchanger | TCC Heat Exchangers | 2016 Malt mill | Tauber | 2-roller, 2.5 t/h Mash pump and automatic valves Holding tank Hot water tank Bodpfx Absxbzuiobjdk

Condition: ready for operation (used), Year of construction: 2006, Prinzing beading machine Bsdoh Hgdrspfx Abbodk Type SME 200/11 year of construction 2006 throat 1100 mm connected load 5,5KW max. sheet thickness 1.5 mm VA Siemens Siematic OP7 control Special equipment: -parallel top roller feed with bearing-mounted work rollers -stepless drive motor -motorised top roller feed, infinitely adjustable sensor-controlled feed for automatic operation Table-top version of sheet guide device Total weight 6700 kg The offer is only addressed to dealers in accordance with § 14 of the BGB (German Civil Code). No Sales to private persons

Condition: as good as new (ex-display), Year of construction: 2025, plate thickness 1.20 mm ST shaft length 140 mm roll diameter 62.0 mm throat 100 mm total power requirement manuell kW weight of the machine ca. 50.0 kg dimensions of the machine ca. 560 x 220 x 500 mm Display machine - like new Never been used (!!) Special price upon request Description: - 8 pairs of beading and flanging rollers included - For the economical production of a wide variety of bead types - High accuracy thanks to precision-mounted shafts Bsdjxaciljpfx Abbjdk - Lower shaft with adjustable stop - Sturdy cast iron construction with a modern design - Expanded application range thanks to 8 different, optionally available roller pairs - Adjustable upper shaft

Condition: good (used), Code: 0177 Brand: NARDELLO - ITALY Model: SOTOS - CE Standard Cross cutting panel saw for postforming tops, edged and non-edged panels. Suitable for companies producing furniture, kitchens, bathroom furniture, furnishings, panels, and various - CE Standard Blade carriage unit: The blade carriage slides on linear guides with spheres blow-by and it is controlled by a brushless motor. Scoring unit group, whih is controlled by a brushless motor, allows to cut postformed edges and also special workings, which increase productivity of the machine. Pliers group and/or rear positioner are controlled by brushless motor and slide on linear guides with spheres blow-by. Cycles check-out is made by Numerical Control. Technical characteristics: Cutting width 1500 mm Cutting height 100 mm Main blade motor 7,5 Hp (5,5 Kw) Rotating speed 4000 Bdsdpfx Abew Dfnhebjk Main blade diameter 300-400 mm Scoring blade motor 2,5 Hp (1.8 Kw) Scoring unit rotating speed 5000 rpm Scoring unit blade diameter 220-300 mm Saw carriage forward speed 0-60 m/1' Saw carriage return speed 40-70 m/1' Positioner speed 0-25 m/1' Positioner return speed 40-60 m/1' Weight 2000 kg

Condition: as good as new (ex-display), Year of construction: 2020, operating hours: 10 h, functionality: fully functional, machine/vehicle number: C1-140B_10, CrimpOne C1-140B - Battery-Powered Hydraulic Hose Crimper Technical Specifications Max. crimping force: 1400 kN Crimp range: 10 - 61 mm Max. hose size: 1 1/4 inch Die type: 140 Max. opening: +25 mm Max. die length: 80 mm Bedpfx Aexd U Nrsbbjdk Servo motor: 1.6 kW Power supply: 12 V (DC) Crimps per hour: 250 pcs Length: 460 mm Width: 280 mm Height: 370 mm Weight: 85 kg Noise level: 71 dB(A) In stock, available immediately!

Condition: good (used), Pneumatic rivet gun, rivet nut pliers, blind rivet nut clamp, pneumatic riveting tool, blind rivet gun, blind rivet -Compressed air rivet gun -Application range: 2.0 to 4.0 mm -Dimensions: 275/80/H220 mm -Weight: 1.3 kg Bedpfx Aogzhxtjbbodk

Condition: new, range L-W-H 780x480x105 mm weight 79,5 kg 7 St. Tool trolley with 7 drawers. Tool trolley has two normal and two swivel castors with brakes. Tool trolley completely lockable with an integrated lock. Drawers can be locked per compartment. All drawers equipped with quick lock and soft-closing mechanism. Tool trolley is equipped with 196 pieces of tool parts: 3 pcs socket wrench sets: 1/4" from 4 - 14mm, 3/8" from 6 - 22mm and Torx from E10 - E20, 1/2" from 8 - 32mm. Various screwdriver sets. Extension for socket wrench sets, various Allen keys from 1 - 10mm, various files. Ratchet ring spanner set from 6 - 22mm, ring spanner set from 6 - 22mm. Bedpfxeu Imlhe Abbodk Pliers range.

Condition: as good as new (ex-display), Year of construction: 2025, plate thickness 2.5 mm ST shaft length 250 mm roll diameter 96.0 mm throat 160 mm roll speed 6.0 + 13.0 U/min. total power requirement 1.5 kW weight 350 kg range L-W-H 1400 x 550 x 1120 mm Display machine - like new Never been used (!!) Special price upon request Bjdpfx Abexachzjbjdk Features: - 4x pairs of beading and flanging rollers included - Robust beading machine with motor-driven rollers - Lower shaft with adjustable stop - For economical production of a wide variety of bead types - High accuracy thanks to precision-mounted shafts - Clearly arranged control elements - Manual adjustment of the upper roller - 2x bending speeds - Powerful drive motor, even under continuous load - 1x mobile foot switch for forward and reverse rotation - Machine base frame

Condition: like new (used), Year of construction: 2020, operating hours: 10 h, functionality: fully functional, machine/vehicle number: C1-140_10, CrimpOne C1-140 Hydraulic Hose Crimper Technical Specifications Max. crimping force: 1400 kN Crimp range: 10 - 61 mm Max. hose size: 1 1/2 inch Die type: 140 Max. opening: +25 mm Bsdjxd U Nljpfx Abbodk Max. die length: 80 mm Servo motor: 3 kW Power supply: 380 V Crimps per hour: 850 pcs Length: 600 mm Width: 435 mm Height: 630 mm Weight: 135 kg Noise level: 71 dB(A) Available immediately from stock!

Condition: new, range L-W-H 780x480x105 mm weight 79,5 kg 7 St. Tool trolley with 7 drawers. Tool trolley has two normal and two swivel castors with brakes. Tool trolley completely lockable with an integrated lock. Drawers can be locked per compartment. All drawers equipped with quick lock and soft-closing mechanism. Tool trolley is equipped with 196 pieces of tool parts: 3 pcs socket wrench sets: 1/4" from 4 - 14mm, 3/8" from 6 - 22mm and Torx from E10 - E20, 1/2" from 8 - 32mm. Bdsdpfxeu Impgs Abbjk Various screwdriver sets. Extension for socket wrench sets, various Allen keys from 1 - 10mm, various files. Ratchet ring spanner set from 6 - 22mm, ring spanner set from 6 - 22mm. Pliers range.

Condition: new, plate thickness 1.20 mm throat 270 (140) mm distance between roll centers 60.0 mm total power requirement manuell kW weight of the machine ca. 46.0 kg dimensions of the machine ca. 600 x 250 x 500 mm Furnishing: - various replacement rollers - hand crank - front stop Bsdpexabmcofx Abbjdk

Condition: new, range L-W-H 790 x 460 x 960 mm weight 70 kg 7 St. Tool trolley with 7 drawers equipped with tools - The pull-out drawers are all ball-bearing. - The entire workshop trolley is lockable. - Drawer 1 1/4" premium ratchet. 1/4" knee joint 45 mm. 1/4" extension 100mm. 1/4" socket wrench 4, 4.5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14 mm. 1/4" long buttons 4, 5, 6, 7, 8, 9, 10, 11, 12, 13 mm. 3/8" premium ratchet. Bsdpju Imnpsfx Abbsdk 3/8" knee joint 55 mm. 3/8" extension 150mm. 3/8" socket wrench 8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 mm. 3/8" long socket wrenches 10, 11, 12, 13, 14, 15, 17, 19 mm. 1/2" premium ratchet. 1/2" knee joint 75 mm. 1/2" extension 125mm. 1/2" Sockets 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 19, 21, 22, 24, 27, 30, 32mm. 1/2" Long Sockets 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 22mm. - DRAWER 2 Ring, ratchet and socket wrench set consisting of. Sockets 8, 9, 10, 11, 12, 14, 15, 16, 17, 19, 21, 22, 24, 27, 30mm. - DRAWER 3 1/4" arbor drill TT8, TT9, TT110, TT20, TT25, TT27, TT30, TT40. 1/4" plug-in bits T8, T9, T10, T15, T20, T25, T27, T30, T40. 1/4" plug-in bits HW3, HW4, HW5, HW6, HW7, HW8. 1/4" recording bits S0, S1, S2, S3, S4. 1/4" locating drill V6, V8, V10. 1/4" locating drill H6. 1/4" receiving bits FD4, FD5.5, FD6, FD7. 1/4" recording bits PH1, PH2, PH3. 1/4" pickup bits PZ0, PZ1, PZ2, PZ3. 1/4" recording bits H2, H4, H5. 8mm locating bits PZ1, PZ2, PZ3, PZ4. 8mm locating bits PH1, PH2, PH3, PH4. 8mm locating bits T20, T27, T30, T35, T40, T45. 8mm locating bits SL 4, SL5.5, SL6, SL6.5. 8mm allen bits Allen 7, 8, 10. 1/2" recording bits M18 Spline (POWER) 1/2" plug-in bits H14, H17, H19, H22, H24. 1/2" locating bits M16 Spline. 1/2" arbor M16 Spline 100 mm long. 1/2" locating drill T80 - 100 mm long. 1/2" pick-up bits M9, M16 - 100 mm long. 1/2" locating drill R9 - 100 mm long. 1/2" Pick-up Bits R10 - 140mm long. 1/2" drill T40, T45, T50, T55, T60, T70 - 140 mm long. 1/2" drill H10, H11, H13 - 140 mm long. 1/2" drill M10, M12, M14 - 140 mm long. 1/2" locating drill H5 - 160 mm long. 1/2" pickup bits H7 - 230mm long. 1/2" locating drill R7, R8 - 230 mm long. 1/2" locating drill H7 - 230mm long. 1/2" locating drill T30 - 300 mm long. 1/2" adapter to 10 mm square. - DRAWER 4 screwdriver flat. 2.5x50, 3x75, 5x100, 6x100. screwdriver cross. PH 2.5x50, 4x75, 5x75, 6x100, 8x150. Impact Screwdriver Plat. 5x75, 6x100, 8x150, 6x38 Stubby. Cross Impact Screwdriver. 5x75, 6x100, 8x150, 6x38 Stubby. - Drawer 5 T-handle Allen with ball head. 2x100, 2.5x100, 3x100, 4x150, 4.5x150, 5x150, 6x150, 8x200, 10x200mm. T-handle Allen. 2x100, 2.5x100, 3x100, 4x150, 4.5x150, 5x150, 6x150, 8x200, 10x200mm. - DRAWER 6 Water pump pliers 250 mm. Combination pliers 150 mm. Needle nose pliers 150 mm. Curved pliers 150 mm. Side cutters 150 mm. Inner curved sealing pliers 170 mm. External curved sealing pliers 170 mm. External sealing pliers 180 mm. Sealing pliers 1.5 x 102, 2 x 102, 3 x 114, 4 x 127, 5 x 127, 6 x 140 mm, Claw hammer with fiberglass handle. - DRAWER 7 Socket wrench 6mm. Socket wrench 7mm. Socket wrench 8mm. Socket wrench 10mm. Socket wrench 11mm. Socket wrench 12mm. Socket wrench 13mm. Socket wrench 14mm. Socket wrench 15mm.

Condition: used, Year of construction: 2022, plate thickness 4.0 mm throat 260 mm distance between roll centers 132 mm stroke 55.0 OW mm tool adaptor Ø 35 mm, 12 mm Nut mm total power requirement 3.0 kW Bdedexaazlspfx Abbsk weight of the machine ca. 450 kg. range L-W-H 1600 x 900 x 1200 mm Exhibition machine from 2022 with only approx. 2x operating hours Condition as NEW Special price on request Equipment: - 3x pairs of beading and flanging rollers included in delivery - robust beading machine with motor-driven rollers - hydraulic adjustment of the upper roller, with pressure gauge - Lower shaft with adjustable stop - for the economical production of a wide variety of bead types - high accuracy thanks to precision-mounted shafts - Clearly arranged switching elements - Base frame equipped with storage compartment - powerful drive motor, even under continuous load - mobile foot switch for clockwise and counterclockwise rotation

Condition: new, range L-W-H 960 x 460 x 860 mm weight 75 kg 8 St. Tool trolley with 8 drawers, all with tools. - The pull-out drawers are all ball-bearing. - The entire workshop trolley is lockable. - The workshop trolley has 4 stable castors, 2 steerable and lockable. - The tools included are made of chrome vanadium steel. - The workshop trolley has 4 stable castors, 2 steerable, 2 lockable, which ensure very comfortable rolling. On the tool trolley there is a stable worktop made of polypropylene plastic. - The tools included in the workshop trolley are made of chrome vanadium steel and are stored in Styrofoam/foam inserts. + Drawer 1: - 1/4" inch: 13 nuts from 4mm to 14mm, 11 long nuts 4mm – 13mm Ratchet, universal joint, extension. - 3/8" inch: 10 nuts from 10mm to 19mm, 11 long nuts from 6mm to 19mm Ratchet, universal joint, extension. - 1/2" inch: 17 nuts from 8mm to 32mm, 9 long nuts from 10mm to 22mm Ratchet, universal joint, extension. + Drawer 2: - Accessories 1/4" inch ratchet: Torx nuts without hole T8,T9,T10,T15,T20,T25,T27,T30,T40 Torx nuts with hole TT8,TT9,TT10,TT15,TT20,TT25,TT27,TT30,TT40. Allen nuts H3 to H8 Slotted nuts SL4 to SL7 Cross nuts PZ0 to PZ3, PH0 to PH3 Multi-tooth nuts M8, M10, M12 Five-star nuts TS10, TS15, TS20, TS25, TS27, TS30, TS40, TS45, TS50 - Accessories 3/8" inch ratchet: Attachment for bits Torx nuts without hole T40, T45, T50, T55, T60, T70 Torx nuts with hole TT40, TT45, TT50, TT55, TT60, TT70 Allen nuts – H7, ??H8, H10, H12, H14 Slotted nuts SL8, SL10, SL12 Cross nuts PZ3, PZ4, PH4, PH8 - Accessories 1/2" inch ratchet: Allen H14,H17,H19,H22,H24 Allen key H5,H10,H11,H13 Torx T40,T45,T50,T55,T60,T70,T80 Ribe R9, R10, multi-tooth M16 Multi-tooth M9,M10,M12,M14,M16,M18 Short attachment, long attachment, medium attachment, Torx T30,T45,T50, Allen key H7 + Drawer 3: - Open-end ratchet wrench 8-9-10-11-12-13-14-15-16-17-19-22mm; - Double ring spanner set 8-piece 6-7mm, 8-9mm, 10-11mm, 12- 13mm, 14-15mm, 16-17mm, 18-19mm, 20-22mm - Torque wrench + Drawer 4: - Precision mechanics screwdriver Slotted: SL3.0 x 100mm, Cross: PH0 x 100mm - Screwdriver with soft grip and outside hexagon: Slotted: SL6 x 38mm ; SL5 x 75mm ; SL6 x 100mm ; SL8 x 150mm Cross: PH2 x 38mm ; PH1 x 75mm ; PH2 x 100mm ; PH3 x 150mm - Torx screwdriver: T6 x 80 ; T7 x 80 ; T8 x 80 ; T9 x 80 ; T10 x 80 ; T15 x 100 ; T20 x 100 ; T25 x 100; T27 x 100 T30 x 100 ; T40 x 150. + Drawer 5: - T-handle Allen / hexagon set with ball head: 3 x 115mm ; 4 x 120mm ; 5 x 140mm ; 6 x 160mm ; 7 x 170mm ; 8 x 175mm ; 10 x 200mm. - T-handle TORX T10 – T40 + Drawer 6 Bsdsu Impyspfx Abbedk - Circlip pliers set inside/outside 4 pcs., 2x curved, 2x straight - Pliers set: combination pliers, side cutters, straight needle-nose pliers, curved needle-nose pliers, pipe wrench. - Lath hammer + Drawer 7 - Socket wrenches 6, 7, 8, 10, 11, 12, 13, 14mm + Drawer 8 - Tools for bodywork processing

Condition: new, plate thickness 2.5 mm throat 260 mm distance between roll centers 92.0 mm weight 295 kg range L-W-H 1200 x 700 x 1200 mm Equipment: Bdsdpfx Abexaaw Hobsk - 3x pairs of beading and flanging rollers included in delivery - robust beading machine with motor-driven rollers - Lower shaft with adjustable stop - for the economical production of a wide variety of bead types - high accuracy thanks to precision-mounted shafts - Clearly arranged switching elements - Base frame equipped with storage compartment - powerful drive motor, even under continuous load - mobile foot switch for clockwise and counterclockwise rotation

Condition: new, range L-W-H 780 x 480 x 1050 mm weight 79,5 kg 6 St. The tool trolley is equipped with 6 storage drawers. The tool trolley is equipped with 2 normal and 2 swivel wheels, one of them with a brake. The tool trolley is fully lockable thanks to an integrated lock. Drawers can be locked per drawer. All drawers are equipped with a quick release and a cushioning fitted. Height-adjustable storage compartment behind the door. Central locking with 2 keys. Tool trolley is equipped with 155 pieces of tool parts: 3 pcs. Socket sets: 1/4 ", 3/8", 1/2 ". Ratchet ring spanner set from 6 - 22mm, Extension for socket sets, different allen keys from 1 - 10mm, Various screwdriver sets. Bdodpfx Absu Imk Rebsk Pliers assortment.

Condition: as good as new (ex-display), Year of construction: 2025, plate thickness 1.20 mm ST Bdedpfxjxaaf Re Abbek Shaft length 140 mm roll diameter 62.0 mm throat 100 mm roll speed 16.0 + 32.0 U/min engine output 0.75 kW weight 135 kg range L-W-H 900 x 450 x 1350 mm Display machine - like new Never been used (!!) Special price upon request Features: - 8 pairs of beading and flanging rollers included - Robust beading machine with motor-driven rollers - Lower shaft with adjustable stop - For economical production of a wide variety of bead types - High accuracy thanks to precision-mounted shafts - Clearly arranged control elements - Manual adjustment of the upper roller - 2 bending speeds - Powerful drive motor, even under continuous load - 1 mobile foot switch for forward and reverse rotation - Machine base frame

Condition: new, range L-W-H 960 x 460 x 860 mm weight 75 kg 7 St. Tool trolley with 8 drawers, 6 of which contain tools. - The pull-out drawers are all ball-bearing. - The entire workshop trolley is lockable. - The workshop trolley has 4 stable castors, 2 steerable and detectable. - The tool included is made of chrome vanadium steel. + Drawer 1: - 1/4" inches: 13 nuts from 4mm to 14mm, 11 long nuts 4mm - 13mm Ratchet, universal joint, extension. - 3/8" inches: 10 nuts from 10mm to 19mm, 11 long nuts from 8mm to 19mm Ratchet, universal joint, extension. - 1/2" inches: 17 nuts from 10mm to 30mm, 9 long nuts from 10mm to 24mm Ratchet, universal joint, extension. + Drawer 2: Bodpfxeu Img Sj Abbsdk - Accessories 1/4" inch ratchet: Torx nuts without bore T8,T9,T10,T15,T20,T25,T27,T30,T40 Torx nuts with bore TT8,TT9,TT10,TT15,TT20,TT25,TT27,TT30,TT40. Imbus nuts H3 to H8 Slotted nuts SL4 to SL7 Cross nuts PZ0 to PZ3, PH0 to PH3 Multi-tooth sockets M8,M10,M12 Five Star Nuts TS10,TS15,TS20,TS25,TS27,TS30,TS40,TS45,TS50 - Accessory 3/8" inch ratchet: Attachment for bits Torx nuts without bore T40,T45,T50,T55,T60,T70 Torx nuts with bore TT40, TT45, TT50, TT55, TT60, TT70 Imbus Nuts – H7,H8,H10,H12,H14 Slotted nuts SL8,SL10,SL12 Cross nuts PZ3,PZ4, PH4,PH8 - Accessory 1/2" inch ratchet: Snack H14,H17,H19,H22,H24 Snack H5,H10,H11,H13 Torx T40,T45,T50,T55,T60,T70,T80 Ribe R9, R10, multi-tooth M16 Multi-tooth M9,M10,M12,M14,M16,M18 short essay, long essay, medium essay, Torx T30,T45,T50, allen key H7 + Drawer 3: - open-end ratchet wrench 8-9-10-11-12-13-14-15-16-17-19-22mm; - Double ring wrench set 8 pieces 6-7mm, 8-9mm, 10-11mm, 12- 13mm, 14-15mm, 16-17mm, 18-19mm, 20-22mm - Torque wrench + Drawer 4: - Precision engineering screwdriver Slot: SL3.0 x 100mm, Cross : PH0 x 100mm - Screwdriver with soft grip and external hexagon: Slot: SL6 x 38mm ; SL5 x 75mm ; SL6 x 100mm ; SL8x150mm Cross : PH2 x 38mm ; PH1 x 75mm ; PH2 x 100mm ; PH3 x 150mm - Torx screwdriver: T6 x 80 ; T7x80 ; T8x80 ; T9 x 80 ; T10x80 ; T15x100 ; T20x100 ; T25x100; T27x100 T30x100 ; T40x150. + Drawer 5: - T-handle imbus / hexagon set with ball head: 3 x 115mm; 4 x 120mm ; 5 x 140mm ; 6 x 160mm ; 7 x 170mm ; 8 x 175mm ; 10 x 200mm. - T-handle TORX T10 – T40 + drawer 6 - Circlip pliers set inside/outside 4 pieces, 2x curved, 2x straight - Pliers set: combination pliers, side cutters, straight needle nose pliers, curved needle nose pliers, pipe wrench. - Claw hammer, grain 3mm,4mm,5mm,6mm,7mm,8mm.

Condition: used, Year of construction: 2021, plate thickness 1.25 mm throat 250 mm distance between roll centers 62.0 mm engine output 0.7 kW weight 170 kg range L-W-H 700 x 600 x 1300 mm Exhibition machine from 2021 with only approx. 2x operating hours Condition as NEW Special price on request Equipment: - 4x pairs of beading and flanging rollers included in delivery - robust beading machine with motor-driven rollers - Lower shaft with adjustable stop - for the economical production of a wide variety of bead types - high accuracy thanks to precision-mounted shafts - Clearly arranged switching elements - Base frame equipped with storage compartment - powerful drive motor, even under continuous load Bdjdpfx Aoxaaccobbok - mobile foot switch for clockwise and counterclockwise rotation

Condition: new, range L-W-H 780x480x105 mm weight 79,5 kg 7 St. Tool trolley with 7 drawers. Bdsdpfou Imhcjx Abbok Tool trolley has two normal and two swivel castors with brakes. Tool trolley completely lockable with an integrated lock. Drawers can be locked per compartment. All drawers equipped with quick lock and soft-closing mechanism. Tool trolley is equipped with 196 pieces of tool parts: 3 pcs socket wrench sets: 1/4" from 4 - 14mm, 3/8" from 6 - 22mm and Torx from E10 - E20, 1/2" from 8 - 32mm. Various screwdriver sets. Extension for socket wrench sets, various Allen keys from 1 - 10mm, various files. Ratchet ring spanner set from 6 - 22mm, ring spanner set from 6 - 22mm. Pliers range.

Condition: new, plate thickness 4 mm roll diameter 125 mm throat 200 mm total power requirement 2,2 kW Bdjdpfod Iim Ajx Abbok weight of the machine ca. 0,48 t dimensions of the machine ca. 1,6 x 0,6 x 1,2 mm • 5 speeds • With foot control • With brake motor • With emergency stop • With hydraulic roller adjustment • With 4 roller sets

Condition: new, plate thickness 1,2 mm roll diameter 62 mm Bodpfxofv H Eds Abbsdk throat 100 mm total power requirement 0,75 kW weight of the machine ca. 130 kg dimensions of the machine ca. 1,1 x 0,5 x 1,3 m Flanging machine is equipped with: - Emergency switch - Footswitch - 7 pcs. Roll sets

Condition: new, plate thickness 0,8 mm throat 180 mm roll diameter mm Bdsdpfjht R Hmjx Abbjk weight of the machine ca. 22 Kg dimensions of the machine ca. 500 x 450 x 160 mm Flanging machine is equipped with: - Emergency switch - Footswitch - 7 pcs. Roll sets

Condition: new, plate thickness 1,25 mm throat 130 mm total power requirement 0,75 kW weight of the machine ca. 180 kg dimensions of the machine ca. 1,1 x 0,6 x 1,2 m Flanging machine is equipped with: - Emergency switch - Footswitch - 8 pcs. Roll sets Bdedevn U Dnjpfx Abbok