MBO CoBo – Stack

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller model: Fanuc Series 18-M, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 500 mm Travel range, Y-axis: 500 mm Travel range, Z-axis: 500 mm Rapid traverse rate, X-axis: 30,000 mm/min Rapid traverse rate, Y-axis: 30,000 mm/min Rapid traverse rate, Z-axis: 30,000 mm/min Table length: 650 mm Table width: 500 mm Spindle speed: 10,000 rpm Speed ranges: 2 Spindle interface: ISO 40 Gsdpfx Agjz Ir Iwo Tjuh Tool positions: 30 Tool selection: Random MACHINE DETAILS Control system: Fanuc Series 18-M Coolant pressure: 20 bar Dimensions & Weight Dimensions (L x W x H): 3,140 x 2,090 x 2,900 mm Weight: 7,000 kg

Condition: ready for operation (used), Year of construction: 2008, Herzog + Heymann mobile flat pile feeder F530, year of manufacture 2008 Herzog + Heymann M7.32, year of manufacture 2008 – suitable for miniature folds – 12 folding pockets – roller diameter 32mm – minimum fold length 25mm Guedpfx Asx Hbkdog Tjh – maximum working width 52cm – double rear knife shafts – transfer section Herzog + Heymann knife folding unit XS 300/6, year of manufacture 2008 – for small formats Herzog + Heymann upright sheet delivery 271, year of manufacture 2008 Stahl miniature upright sheet delivery STA30F, year of manufacture 1990 Herzog + Heymann transfer section 246/08, year of manufacture 2008 Optional: Herzog + Heymann small format feeder, year of manufacture 1991 – bottom suction feed

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, travel distance X-axis: 2,100 mm, travel distance Y-axis: 720 mm, travel distance Z-axis: 600 mm, controller manufacturer: Siemens, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 2,100 mm Gedoz Irphepfx Ag Touh Travel range, Y-axis: 720 mm Travel range, Z-axis: 600 mm Table size: 2,800 × 650 mm Rapid traverse rate, X-axis: 30 m/min Rapid traverse rate, Y-axis: 30 m/min Rapid traverse rate, Z-axis: 30 m/min Spindle speed: 8,000 rpm Tool holder: ISO 40 Tool capacity: 30 MACHINE DETAILS Control system: Siemens Coolant pressure: 25 bar EQUIPMENT High-pressure coolant system through the spindle and at the flange side Additional coolant tank Chip conveyor with scraper belt

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 1,100 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 640 mm, controller model: SIEMENS 840 D, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 1,100 mm Travel range, Y-axis: 500 mm Travel range, Z-axis: 640 mm Number of pallets: 2 Table size: 2 × 1,000 × 450 mm Table load capacity: 600 kg Spindle speed range: 50–10,000 rpm Drive power: 18.5 kW Tool interface: DIN 69871 / ISO 40 Feed rate range X/Y/Z: up to 10,000 mm/min Rapid traverse rate in all axes: 30 m/min Gsdpfez Ibb Tox Ag Teuh MACHINE DETAILS CNC path control: SIEMENS 840 D Number of tool positions: 30 Machine dimensions & weight Machine dimensions L × W × H: approx. 3,605 × 3,041 × 3,220 mm Machine weight: approx. 6,700 kg EQUIPMENT 2-position pallet changer 30-position tool changer Internal coolant supply (ICS) Full enclosure with electrically interlocked safety doors Linear guides with double roller recirculating bearing for even absorption of high torques in all directions Ball screws in all 3 axes Machine bed made of Meehanite cast iron for high precision, rigidity, and vibration damping Swivel chip conveyor with integrated coolant system Preparation for 4th axis CE compliant

Year of construction: 2013, condition: used, Sewing machine Müller Martini Ventura MC (3215) Year: 2013 Description: - Colour monitor with touch screen - Semi automatic setting Gedpfx Aermyp Rsg Tsuh - Feeder - ASIR Automatic Signature Image Recognition: Asir III - 2 + 2 opening possibilities - Book block separator - Book stacker - Roller table delivery - PIAB/Venturi

Condition: repair required (used), functionality: limited functionality, Year of construction: 2017, machine/vehicle number: 2219, laser type: fiber laser, working length: 3,000 mm, working width: 1,500 mm, travel distance Z-axis: 120 mm, No minimum price – guaranteed sale to the highest bidder! The machine will be dismantled at the end of week 42. TECHNICAL DETAILS Laser type: Fiber laser Laser source manufacturer: IPG Laser source model: YLS-4000-CUT Laser source power: 4 kW Currently available cutting power: 2 kW Working area: 3,000 × 1,500 mm Z-axis travel: 120 mm Number of pallets: 2 Gusdez N Dutopfx Ag Tsh MACHINE DETAILS Control system type: CNC control Level of automation: Automatic Type of operation: Electric Machine dimensions: approx. 4,000 × 8,000 mm EQUIPMENT 2-pallet changing table Note: Modules 1, 4, and 5 automatically lock after cutting and must be unlocked by IPG. The currently available cutting power is 2 kW.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, spindle speed (max.): 6,000 rpm, bar passage: 65 mm, Equipment: bar feeder, chip conveyor, TECHNICAL DETAILS Tool turret Number of turrets: 3 Tool holder: VDI 25 W-gear Main and counter spindle Main and counter spindle speed: up to 6,000 rpm Bar diameter: 65 mm MACHINE DETAILS Coolant tank: 600 l Gjdpfsz Ibf Ejx Ag Teuh Coolant pressure: 8 / 18 bar EQUIPMENT Gantry removal device Hainbuch HS Axzug / GS Axfix Chip conveyor Coolant tank with strainer basket Coolant pump Coolant cooling unit FMB Turbo 10-65, 3-meter bar feeder

Condition: used, Year of construction: 2010, The Horizon AFC 566 FKT + PST-40 folding machine, manufactured in 2016, is a high-performance solution for efficient and precise folding operations. Currently in production and located in Germany, this machine is designed to handle a wide range of sheet sizes, from a minimum of 60 x 64 mm to a maximum of 558 x 850 mm, with a maximum mechanical speed of 240 m/min (30,000 cycles/h). Equipped with a flat pile feeder capable of handling a maximum pile height of 740 mm, it ensures continuous and efficient paper feeding. The primary folding unit is an AFC-566 FKT with 6 combi folding plates, offering manual pocket and roller configuration. It features a used condition roller and a cross fold unit with 1 knife, providing versatile folding options with a maximum working width of 558 mm and a maximum fold length of 850 mm. The machine also includes a noise protection hood and touch screen control for ease of operation. The delivery mode is a PST-40 press delivery, manufactured in 2010 with the serial number 360003. It has a maximum working width of 440 mm and a pressing force of 20,000 N, ensuring efficient and organized output handling. This machine is well-suited for businesses seeking to enhance their folding capabilities with a reliable and high-performance solution. Format: 440 x 310 mm Equipment: Feeder Feeder Mode: Flat pile feeder Max. pile height: 740 mm Folding Units 1st unit Type: AFC-566 FKT Pockets: 6 Pocket Type: Combi folding plates Pocket Configuration: manual Rollers Configuration: manual Roller condition: used condition Working width max: 558 mm Fold length max: 850 mm Cross fold unit with 1x knife Noise Protection Hood Touch Screen Control Delivery Gsdpfswcqw Ssx Ag Teuh Delivery mode: PST-40 Type: Press delivery Year: 2010 Serial number: 360003 Working width max: 440 mm Technical Details Sheet size max: 440 x 310 mm Sheet size min: 60 x 64 mm Infeed height min: 280 mm Mechanical speed max: 240 m/min Pressing force: 20,000 N Built-in controller Technical details: Sheet size max: 558 x 850 mm Sheet size min: 128 x 148 mm Max. mechanical speed: 240 m/min Max. mechanical speed (cycles): 30,000 cycles/h

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 90439563, Year of construction: 2013, operating hours: 4,543 h, load capacity: 1,200 kg, lifting height: 2,600 mm, mast type: duplex, fork length: 1,150 mm, TECHNICAL DETAILS General Information Year of manufacture: 2013 Type: Pedestrian stacker Serial number: 90439563 Operating hours: 4,543 h Unladen weight: 834 kg CE marking: Yes Lifting Data Lifting capacity: 1,200 kg Lifting force: 1,200 kg Lifting height: 2,600 mm Free lift: 0 mm Mast: Duplex Dimensions Overhead height: 1,700 mm Guodpez N Di Refx Ag Teh Fork length: 1,150 mm Fork width: 560 mm Drive and Battery Drive: electric Battery voltage: 24 V Transport Data Transport dimensions: 1,850 × 800 × 1,700 mm Transport weight: 834 kg Transport packages: 1 unit EQUIPMENT Duplex mast Electric drive CE marking present

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, operating hours: 28,000 h, controller model: Siemens Sinumerik 840 D SL, laser power: 5,000 W, sheet thickness steel (max.): 25 mm, working length: 4,000 mm, working width: 2,000 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Resonator power: 5 kW Working area (L × W): 4,000 × 2,000 mm Sheet metal thickness, steel: max. 25 mm Sheet metal thickness, stainless steel: max. 20 mm Sheet metal thickness, aluminum: max. 20 mm Speed: max. 235 m/min Accuracy: 0.001 mm MACHINE DETAILS Control system: Siemens Sinumerik 840 D SL Dimensions & Weight Dimensions (L x W x H): 12,000 x 5,300 x 2,200 mm Machine weight: 13,000 kg Operating hours: 28,000 h EQUIPMENT LiftMaster Power supply for TruDisk via the machine Work area lighting Positioning laser diode Spray device PierceLine FocusLine NitroLine PlasmaLine Automatic nozzle cleaning TRUMPF laser Solid-state laser TruDisk 5001 with one LLK outlet Light guide cable according to standard layout Laser cooling unit (water-air) Excitation via pump diodes Laser power control Laser logbook function Cutting head Universal cutting unit with fully adaptive lens system Protective glass against lens contamination Condition monitoring of the protective glass ControlLine: Height control and sheet metal edge detection 17-inch touch color display Simple workshop programming Advanced workshop programming Fast reproduction Integrated technology data Gedpfx Asz Npdgog Tsuh Automatic shutdown FastLine FlyLine AdjustLine Remote service via internet USB interface RJ-45 network connection CE marking Light barriers Multi-camera base system Compact dust extraction system Machine enclosure with certified viewing window, door on the right Electric roll-up roof Retrofitting capability for max. 2 additional LLK outlets

Condition: excellent (used), Year of construction: 2016, operating hours: 2,615 h, functionality: fully functional, plate width: 1,600 mm, plate length: 2,108 mm, KODAK Magnus VLF large-format thermal plate setter with MCU multi-cassette unit (four cassettes) New TH 7 laser (August 2022) with only 2615 laser hours 2400 dpi Z-speed Total number of exposed printing plates: 395,443 pieces Minimum size: 483 x 394 mm Guedpfxsytawne Ag Tsh Maximum size: 1600 x 2108 mm Material flow from left to right, Print Console enabled for all RIP software, Dell PowerEdge T330 server.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, operating hours: 38,149 h, controller model: Bosch MTX compact, laser power: 4,000 W, punching force: 22 t, sheet thickness (max.): 8 mm, Includes SheetMaster & GripMaster! TECHNICAL DETAILS Laser power: approx. 4,000 W Punching force: max. 220 kN Sheet thickness: max. approx. 8 mm Working area, laser operation (X × Y): approx. 2,540 × 1,280 mm Working area, punching operation (X × Y): approx. 2,540 × 1,370 mm MACHINE DETAILS Control system: Bosch MTX compact Dimensions & Weight Footprint (L × W): approx. 7,950 × 6,700 mm Machine weight: approx. 23,000 kg Total connected load: 87 kVA Operating hours: 38,797 h Beam on-time: 38,149 h Guedpez Nn H Hjfx Ag Teh EQUIPMENT Active dies SheetMaster GripMaster

Condition: ready for operation (used), Year of construction: 2010, machine/vehicle number: 6.719, functionality: fully functional, cutting height (max.): 90 mm, saw blade diameter: 350 mm, overall weight: 500 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. cutting depth: 120 mm Max. cutting height: 90 mm Max. saw blade diameter: 350 mm Saw blade bore diameter: 30 mm MACHINE DETAILS Voltage: 400 V Current consumption: 7.13 Fuse rating: 16 A Main motor power: 3.1 kW Gjdpfxoz Ni S Re Ag Touh Dimensions & Weight Dimensions (L x W x H): 1,500 x 900 x 1,700 mm Weight: 500 kg Shipping packages: 1 piece

Year of construction: 1999, condition: used, Computer-controlled hot foil embossing machine Schmedt Präzimark PMK 203 with a large number of type wheels, e.g: 563 / 610 697 - 2DP. / 635 564 / 667 610 / 16.. / 634 631 / 169 / 4,3 562 / 697 632 / 697 561 / 695 691-24P / 633 564 / 667 610-16P / 634 631 / 691 / 4,3 Technical data: Machine L x W x H: 850 x 630 x 765 mm Control cabinet L x W x H: 135 x 370 x 665 mm Space requirement L x W x H (machine only): 1200 x 890 x 1100 mm Weight, including control cabinet: 80 kg Power type: Alternating current, 1 phase Frequency: 50 Hz Gsdpfxewvtqno Ag Tjuh Voltage: 230 V Rated current: 2.0 A Output: 0.6 kW Fuse in the supply line: 10 A Cross-section of the supply cable: 1.5 mm² Length of connection cable: 2 m Pneumatic pressure: 0.6 min MPa

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, operating hours: 3,625 h, cutting width (max.): 4,300 mm, overall weight: 7,200 kg, cutting length (max.): 1,600 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. cutting length: 1,600 mm Max. cutting width: 4,300 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 13,600 x 2,450 x 2,450 mm Weight: 7,200 kg Guodpfx Aoz Ni S Djg Tjh Transport packages: 8 pcs. Operating hours: 3,625 h