Laser cutting machine

Trumpf TruLaser 3040

Condition: ready for operation (used), Year of construction: 2015, Main Drive Laser power 5KW Co2 Additional Equipment Platform installation possible Machine was connected to STOPA Universal large-scale storage system (4x2 metres) Working area 4000x2000mm Closed machine frame with integrated laser unit / Movement unit for high-precision processing / Torque drive in combination with linear direct drives / Closed beam guidance / Single cutting head strategy / Cooling unit Automatic pallet changer in longitudinal direction with extended pallet pull-out / 17” touch factory screen / ergonomic control panel with or screen / Work area lighting / Position laser diode spraying device / PierceLine, FocusLine, NitroLine, PlasmaLine Co2 laser TruFlow 5000 with optimized standby mode / Maintenance-free turbo radial blower / High-frequency excitation / TASC laser control, laser power control, laser logbook function Lens cutting head with 250mm lens / Universal quick-change device (UTI) with bus connection / LensLine with status check / ControlLine: Height control and sheet outer edge detection / Lens with RFID chip Laser ON / beam on 78187h/26610h Ksdpfx Ajx H U Ddsa Esfa This TRUMPF TruLaser 3040 was manufactured in 2015. It features a 5KW CO2 laser and has been maintained annually by TRUMPF. It can be integrated with a STOPA Universal large-scale storage system. If you are looking to get high quality cutting capabilities consider the TRUMPF TruLaser 3040 machine we have for sale. Contact us for more information. Application Types Cutting

Condition: excellent (used), Year of construction: 2008, Operating hours: approx. 20,000 h Kfjdpfx Aasxvqawj Eja

Condition: good (used), Year of construction: 2007, Working area X 4000 mm, Y 2000 mm, Z 115 mm Weight 16000 kg parameters L x W x H: approx: 9800 mm x 5300 mm x 2000 mm Siemens Sinumerik 840 D type of laser TruFlow 4000 W max thickness 20 mm 4000 mm x 1250 mm feed 3400 mm Dismantling, loading, crane is not in price of machine - plus price per all services NC: 88631 - Resonator/HD pump 1: 87603 - Beam on/pump 2: 53667 Technical parameters:- Designation: KNC/H 1500/65- Maximum temperature: 650 Kfodpfx Aajvtm Szj Eja °C- Recommended operating temperature range: 300°C – 600°C- External dimensions approx. (wxhxd): 2800x3200*x2100mm * height including structure for door when hydraulically opening- Internal dimensions (wxhxd): 1500 x 1000 x 1000 mm- Number of heating zones: 1- Maximum batch weight: 1000 kg- Melting power: 48 kW- Furnace weight: 1300 approx. kg- Voltage: 3/PEN 400/230V AC 50 Hz- The damper is part of the furnace, serves for automatic temperature control in the furnace and is controlled by the program from the controller. - includes technical documentation in Slovak - protocol of measurement and optimization of the temperature field to meet the DIN 17052-1 standard ΔT10°C in the internal working space (in an empty furnace at Tmax) \- Technical documentation is in SJ. Manufacturer: LAC, s.r.o., Czech Republic Year of Production: 2021 This is an electric furnace, the heating system of which consists of heating resistance elements located near the fan unit. Through the heating branches, the fan ensures circulation of the atmosphere in the heating space and thus heating of the working atmosphere and the charge in the furnace. The working chamber of the furnace is equipped with a separately regulated heating unit in the rear wall of the furnace. The furnace is equipped with a radial circulation fan with a horizontal shaft to ensure uniform temperature distribution throughout the working space of the furnace. The circulation fan drives the heated air through the circulation channels of the circulation insert. All rotating parts are located under a cover against accidental contact. The temperature profile of the device is controlled by a PID programmable INDUSTRY controller. This controller allows the creation of up to 30 heat treatment programs depending on the needs of the processing technology and the properties of the processed batch. Dimensions see. appendix.

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, operating hours: 35,000 h, TRUMPF TruLaser 3040 (L50) mit Liftmaster Store L32 TECHNISCHE DATEN: Fabrikat TRUMPF Typ TruLaser 3040 – 3000 w Baujahr 2015 Arbeitsbereich 4.000 x 2.000 x 115 mm Steuerung Siemens Sinumerik 840 D sl Laserleistung 5.000 Watt Max. Blechdicke Baustahl 20 mm Max. Blechdicke Edelstahl 15 mm Max. Blechdicke Alu 15 mm Betriebsstunden NC ein ca. 35.000 h Laser ein ca. 14.500 h Kfjdjxt Unaspfx Aa Eoa Genauigkeit Positionsabweichung Pa: 0,05 mm Mittlere Positionsstreuung Psmax: 0,03 mm Abmessungen (L x B x H): 11.400 x 6.730 x 2.400 mm Gewicht: 13.000 kg AUSSTATTUNG Separate Schalteinheit und Kühlung Trumpf LoadMaster L32 Absauganlage Trumpf/Handte MF-L 2500 (Max. Absaugmenge: 2.500 m³/h)

Year of construction: 2021, condition: like new (used), For sale is an as good as new orbital welding machine from the company ORBITAL Weldingtools with many accessories.Year of manufacture 2021. Ksdpfx Ashp U S Ssa Esfa

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2009, operating hours: 12,024 h, machine/vehicle number: A0240A0643, sheet thickness (max.): 20 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 115 mm, workpiece weight (max.): 1,700 kg, TECHNICAL DETAILS Working area X-axis: 4,000 mm Y-axis: 2,000 mm Z-axis: 115 mm Maximum cutting thickness: 20 mm Maximum workpiece weight: 1,700 kg Speed Simultaneous: 140 m/min Control: Siemens Sinumerik 840D SL Accuracy Position deviation Pa: 0.05 mm Mean positional scatter Psmax: 0.03 mm Laser: TruFlow 4,000 MACHINE DETAILS Kfodpfjxgqv Hox Aa Esa Connected load: 4,000 W Dimensions & Weight Dimensions (L x W x H): 12,000 x 5,300 x 2,200 mm Weight: 13,000 kg EQUIPMENT Separate control unit and cooling Trumpf LoadMaster Exhaust system Trumpf/Handte MF-L40/8/1 (Max. extraction capacity: 2,000 m³/h)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2015, operating hours: 33,749 h, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 15 mm, sheet thickness aluminum (max.): 10 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 115 mm, workpiece weight (max.): 1,700 kg, TECHNICAL DETAILS X-axis: 4,000 mm Y-axis: 2,000 mm Z-axis: 115 mm Maximum workpiece weight: 1,700 kg Maximum speed: 140 m/min Controller: CNC Sinumerik 840D SL Positioning accuracy Positioning deviation Pa: 0.1 mm Average positioning accuracy Ps: 0.03 mm Laser data Maximum laser power: 4,000 W Wavelength: 10.6 µm Sheet thickness mild steel: 25 mm Sheet thickness stainless steel: 15 mm Sheet thickness aluminium: 10 mm MACHINE DETAILS Length: 12,000 mm Width: 5,300 mm Height: 2,200 mm Weight: 14,000 kg Total system power consumption: 11–65 kW Beam-on time: 19,152 h (28.08.2025) Laser-on time: 33,749 h (28.08.2025) EQUIPMENT - Automatic longitudinal pallet changer - Longitudinal chip conveyor - Oil vaporizer unit - PierceLine - FocusLine - NitroLine - PlasmaLine - TruFlow 4000 CO2 laser with optimized standby mode - Maintenance-free radial turbine - High-frequency excitation - TASC laser control - Laser power control - Laser logbook Kfedpfx Aaoxl T Rdo Eea - LensLine with status monitoring - Cutting head with 250 mm focal length - Quick-change cutting head unit (UTI) - ControlLine - Lens with RFID chip - ContourLine - Micro-welding - FastLine - AdjustLine - Internet remote services - FlyLine - Simple workshop programming

Condition: new, 900 mm 900 mm 900x900 mm saw band length 9300 x 67 x 1,1 mm table height 790 mm band speed 14 - 60 m/min total power requirement 11 kW weight of the machine ca. 8,45 t dimensions 4,485 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Kfjdjfg E Hpepfx Aa Esa Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Year of construction: 2009, condition: ready for operation (used), Laser power: 4kW, working area X/Y/Z: 4000mm/2000mm/115mm, max. sheet thickness mild steel/stainless steel/aluminium: 20mm/15mm/10mm, max. workpiece weight: 1700kg. Machine dimensions X/Y/Z: approx. 11600mm/5300mm/2200mm, weight: approx. 15000kg. Includes Trumpf Liftmaster. Documentation available. An on-site inspection is possible. Kjdpfx Asxbhgxja Eofa

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2013, operating hours: 62,603 h, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 15 mm, sheet thickness aluminum (max.): 10 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 115 mm, workpiece weight (max.): 1,700 kg, Laser cutting system with LiftMaster TECHNICAL DETAILS Software: TRUMPF CNC based on SINUMERIK 840D sl Kfsdexamdyspfx Aa Eoa Laser: TruFlow 4000 Laser type: CO2 laser Laser power: 4,000 W Travel X-axis: 4,000 mm Y-axis: 2,000 mm Z-axis: 115 mm Max. workpiece weight: 1,700 kg Accuracy Maximum positioning scatter Ps max: ±0.03 mm Position deviation Pa: ±0.05 mm Smallest programmable increment: 0.001 mm Max. sheet thickness Steel: 20 mm Stainless steel: 15 mm Aluminium: 10 mm Laser gas consumption HE (4.6): 13 l/h CO2 (4.5): 1 l/h N2 (5): 6 l/h MACHINE DETAILS Beam operating hours: 31,822 h Laser operating hours: 62,603 h Machine connected load: 62 kVA Chiller connected load: 26 kVA Space required (LxWxH): 12 x 5.3 x 2.2 m Weight: 14,500 kg EQUIPMENT - Closed machine frame - Pallet changer - LiftMaster - Longitudinal conveyor belt - Light barriers - Control panel with touchscreen

Condition: new, We have different electronic parts for DMG machines, BOSCH,Siemens .... On Your request I will send detailed photos of all parts. Kfsdpfxsddxv Uj Aa Eea

Condition: refurbished (used), functionality: fully functional, Year of construction: 2016, operating hours: 30,231 h, control type: CNC control, degree of automation: automatic, laser type: CO₂ laser, laser source manufacturer: TRUMPF, laser hours: 45,185 h, laser power: 3,200 W, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 8 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 115 mm, cutting speed: 140 mm/min, repeat accuracy: 0.03 mm, workpiece weight (max.): 1,700 kg, type of cooling: water, overall weight: 14,000 kg, Equipment: cooling unit, dust extraction, nozzle changer, safety light barrier, TRUMPF TruLaser Series 3000 Kfedpfxew I Aiis Aa Eoa Standard universal machines. These multi-talented units stand out for their flexibility and reliability in laser cutting operations.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2013, operating hours: 28,000 h, machine/vehicle number: A1240A0379, laser power: 6,000 W, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 115 mm, workpiece weight (max.): 1,700 kg, No minimum price – guaranteed sale to the highest bidder! Machine can be dismantled and loaded for €2,000. TECHNICAL DETAILS X-axis: 4,000 mm Y-axis: 2,000 mm Z-axis: 115 mm Workpiece Max. weight: 1,700 kg Max. sheet size: 4,000 x 2,000 mm Kfjdpfx Aswycq Ssa Esa Max. speed Simultaneous: 140 m/min Control TRUMPF CNC control: Siemens Sinumerik 840D SL Precision Position deviation Pa: 0.05 mm Mean position scatter Ps max.: 0.03 mm Laser Data TruFlow 6000 Max. power: 6,000 W Wavelength: 10.6 µm Max. sheet thicknesses Mild steel: 25 mm Stainless steel: 25 mm Aluminum: 15 mm Power consumption Total system electrical load: 11–82 kW MACHINE DETAILS Laser hours: approx. 28,000 h Electrical connection Frequency: 50 Hz Voltage: 400 V Dimensions and weight Length: 12,000 mm Width: 5,300 mm Height: 2,200 mm Weight: 13,000 kg EQUIPMENT Chiller unit Automatic longitudinal pallet changer Work area lighting Torque drive in combination with linear direct drive Enclosed machine frame with integrated laser unit Motion unit for high-detail processing Enclosed beam guidance Single cutting head strategy Positioning laser diodes Spraying device Machine is sold without LiftMaster and without the two scrap conveyors.

Year of construction: 2020, condition: new, DESCRIPTION The demineralized water station is used to produce the so-called demi water using ion exchange technology. The station consists of 3 columns Kfsdpfjfz Nakex Aa Esa Strongly acid cation exchanger working in the sodium cycle, Strongly basic anion exchanger working in the chloride cycle, Carbon filter Our RDI-2 / RDI-4 demineralization stations are equipped with fully automatic control heads. Rouezts The columns are made of AISI316L steel

Condition: used, Year of construction: 2007, machine/vehicle number: A0240A0521, Working hours laser on: 50921 h Working hours beam on: 21717 h Laser power: 3200 Watt Working range laser: 4000 x 2000 x 115 mm Max. steel: 20 mm Max. stainless steel: 12 mm Kedsuqcw Repfx Aa Eefa Max. aluminium: 8 mm Length: 11600 mm Width: 5300 mm Height: 2200 mm Machine weight: 16000 kg Electrical connected load: 73 kVA Standard configuration - Closed machine frame with integrated laser unit - Maintenance-free three-phase AC servo motors- Automatic pallet changer- Conveyor belt for small parts / slug- Work area lighting- Positioning laser diode- Oil spray device- AutoLas Plus- Hi-Las- PMS TRUMPF Laser- CO2 laser TLF 3200- Cooling unit- Radio-frequency - Radio-frequency excitation - Programmable cutting gas pressure - Laser power control - Logbook function Cutting head - Universal quickchange device for cutting head Control Unit - Siemens Sinumerik 840 D - 3,5" floppy drive - RJ45 network connection - Automatic shut down mechanism - Dignostic function - Maintenance logbook - Technology data Safety - Light barriers - Compact dust extractor - Multi chamber exhaust system - Beam delivery system Programming - Workshop programming ToPs 100 lite Extended machine accessories none Automation none