Coolant Treatment System

Zyklomat ZKR 14/350

Condition: used, Year of construction: 2016, Coolant cleaning system Manufacturer: Zyklomat Type: ZKR 14/350 Year of construction: 2016 For cleaning grinding emulsions Supply of max. approx. 250 L/min. at approx. 3.5 bar water Transfer to the filter system is carried out by the customer, air and foam-free. Temperature max.: 50°C Cleaning capacity: 350 L/min. Recirculation from clean tank to dirty tank: 100-350 L/min. Machine supply max.: 250 L/min. Filtration principle: ZYKLOMAT high-performance hydrocyclone Z1B-9/3 Separation particle size: approx. 5 µm Medium: Emulsion 3-6% Operating temperature: Ambient temperature Solid particles: approx. 5.14 m3 Operating volume max.: approx. 4.58 m3 Operating volume min.: approx. 3.60 m3 Process flow: Fully automatic full-flow filtration Sludge discharge: Fully automatic, with consistent consistency The dirty liquid is fed via customer-provided lift stations. The swarf and fine sludge produced during grinding (grinding debris, scale, corundum) are discharged via a scraper conveyor. In the upper scraper section, the sludge is pre-dried. Filtration takes place via ZYKLOMAT high-performance hydrocyclones. The system runs fully automatically. Maintenance: annual maintenance Availability: 10-2026 Double scraper tank for discharge of grinding sludge Type: KR 1.75-5.1 Total volume: approx. 5.14 m3 Volume max.: approx. 4.58 m3 Length: approx. 4,000 mm, including 70 mm stiffening Width: approx. 1,890 mm, including 140 mm stiffening Height: approx. 1,105 mm, including 100 mm base profile Neck height: approx. 2,300 mm Theoretical discharge volume max.: 15 kg/h Function: Coolant tank with integrated clean tank, sedimentation and flotation tank with fully automatic sludge discharge. 1 Bevel gear motor Voltage 400 V, 50 Hz, IP 54 as scraper drive Bsdpfxszwccme Ac Tswt 3 connection nozzles for return lines from three machines 1 clean liquid tank, integrated at the rear into the scraper tank. Oil-tight welded, with an internal, circumferential bevel gear, various cover plates (non-walkable plates screwed onto an angle frame), without ladder, without handrail, without internal rungs Volume max.: approx. 0.55 m3 25826

Condition: good (used), Year of construction: 2022, functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 650 mm, Hedelius Acura 65 Marathon, Year of manufacture 2022, Control system Heidenhain TNC 640, Horizontal travel X/Y/Z 700/650/650 mm, Vertical travel X/Y/Z 465/465/379 mm, 2-axis NC swivel table – rotary table 400 x 400 mm, Tool changer, 60 positions, Additional magazine, 180 positions, Spindle speed up to 14,000 rpm, Tool holder SK 40, Water-cooled milling spindle, Water-cooled A + C axes, 22-position pallet system, 15 pallets available, Pallet size 400 x 400 x 38 mm, Zero-point clamping system, Pallet storage system MARATHON P422, 5-axis simultaneous machining ACURA, Kinematics option, Formingstar package, Accuracy package for Z-axis, Internal compressed air supply, Sloping bed band filter system, Bsdpfjznvbqox Ac Towt Internal coolant supply 25 bar, Pressure booster pump 50 bar, Pre-filter for sloping bed band filter system, Exhaust air filter LTA 3001, Extended chip flushing system, 30-infrared measuring probe M&H, Laser control system, 50 spindle hours since last maintenance.

Year of construction: 2012, condition: excellent (used), machine/vehicle number: HIKSA250Aneu, Complete Telemecanique / Schneider Canalis KSA - 400A busbar system available! Stock 75 running meters!!! Type KSA 250A / 250 amps - 5 poles - L1 L2 L3 N PE Voltage Ui max. 690V, frequency 50 - 60 Hz Rail length predominantly 5m, also 1.5m and 3m available Price per meter including connectors, end pieces and brackets Feed and outlet boxes 16-32-63A are available as options (other tap-off boxes 125 - 250A available on request) The dismantling was carried out by a qualified electrician. Bwjdpfjpgmryjx Ac Tot Busbars are in GREAT condition!!!! Please ask for the desired lengths or accessories! Stock items, available immediately!!! ----- old Kloeckner Moeller BD1 system still available! Busbars, corner parts, feeds and outlet boxes for the old Kloeckner Moeller BD1 / BD 1 system in stock!!! Please ask ! Are you also looking for a crane system?

Condition: like new (used), Year of construction: 2011, measuring range X-axis: 100 mm, measuring range Z-axis: 1,000 mm, mount diameter: 100 mm, overall weight: 160 kg, path measurement accuracy: 2 mm, tool weight: 160,000 g, Year of construction: 2011 Fully automatic with manual options Intuitive input of automatic measurement cycles Wear-free and maintenance-free linear motors Flexible control console From manual to fully automatic Low distortion even under the maximum permissible load thanks to its high installed weight FEM-optimised and thermally stable cast iron construction RFID – data carrier system Customer-specific data storage Measurement processes with integrated data retrieval and storage Integration of all popular RFID systems The read / write head can be positioned automatically and manually for all popular tool holder systems Technikal data Length and diameter up to 1,000 mm Max. tool diameter for measuring according to snap gauge principle 100mm Maximum tool weight 160 kg Tool holder SK50 (additional holders availale from company HAIMER/Microset) Concentricity at the spindle nose 2 μm Repeatability ±2 μm Tool preseting Quick and precise measuring results thanks to intuitive operation Accurate measurement values for complex and helical cutters with the precise focus window Bsdpsyzzb Ssfx Ac Tewt User administration and access privileges Display currently in 16:9 format Cross hair fixed / floating with automatic measurement lines and automatic contour evaluation One design for the software of all equipment classes Windows 7 Professional or Ultimate, whatever you need Data exchange Post-processed data is transferred to the relevant data exchange drive either via the network or via USB. All equipment can provide tool data to almost any software (tool management, databases, CAD / CAM) via a bidirectional interface – irrespective of whether.

Condition: ready for operation (used), Year of construction: 2023, A Keyence optical 3D coordinate measuring machine with a 360° 3D scan is available. Measuring accuracy: +/-10µm, repeatability: 2µm, resolution: 0.1µm, point density: 16 million, measuring diameter (low magnification): 300mm, measuring diameter low magnification/composite: 200mm/500mm, rotation range: 360°, tilt range: 45°, max. table load: 50kg. Machine dimensions X/Y/Z: approx. 1000mm/1000mm/1000mm, weight: approx. 65kg. Documentation available. On-site inspection is possible. Bodswx Rcyopfx Ac Tewt

Condition: used, Year of construction: 2011, x-travel 835 mm y-travel 510 mm z-travel 510 mm distance spindle nose and table 120 - 630 mm Bjdpfjx R Em Dex Ac Tjwt control iTNC 530 ERGOLine Heidenhain turning speed range - main spindle 20 - 10.000 min/-1 power capacity - main spindel 13 / 9 kW tool taper SK 40 DIN 69871 max. Torque 130 / 87 Nm table surface area 1.000 x 560 mm max. table load 800 kg number of T-slots 5 T-slot - width 14 mm T-slot - distance 100 mm number of toolpositions 20 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 250 mm max. tool weight 6,0 kg rapid traverse ( X / Y / Z ) 30 m/min feed speeds 1 - 20.000 mm/min total power requirement 23 kVA weight of the machine ca. 4,0 t dimensions of the machine ca. 4,5 x 3,5 x 2,7 m CNC - MachiningCenter Vertical DECKEL MAHO - DMC 835 V New Design - 20,796h operating hours, 7,544h spindle hours

Condition: like new (used), Year of construction: 2013, operating hours: 39,945 h, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 580 mm, travel distance Z-axis: 400 mm, controller manufacturer: Heidenhain iTNC 530, total height: 2,900 mm, total length: 5,500 mm, total width: 2,650 mm, spindle speed (min.): 28,000 rpm, coolant supply: 40 bar, Year of construction: 2013 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 450 Y-axis travel mm: 580 Z-axis travel mm: 400 C-axis degrees: 360º (0,0001) A-axis degrees: +10 / -110º Feed rates m/min: 80 Rapid traverse m/min: 80 Acceleration in the axes m/s2: 13 Milling/turning table nc: Number of pallets: System 3R (21 pallets type GPS 240, 30pallets type GPS 120 and 24 pallets type ITS50) Table dimensions mm: baseplate for root pallet Maximum workpiece size (D x H) mm: for pallet GPS 240 (275x275x200mm); for pallet GPS 120 (150x150x200mm) and for pallet ITS50 (ø70x200mm) Max. workpiece weight kg: 150 (pallet + workpiece) Spindle Spindle speed rpm: 28000 Spindle drive power kW: 35/25 (40%ED/cont) Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 600 Tool system Tool holder: HSK-A 63 Tool magazine slots: 120 Tool changer: Double gripper Equipment Electronic Handwheel Chip conveyor Infrared probe Internal cooling lubricant supply Rotating inspection windows Rinsing gun blowing air through spindle center selectable via M-function Laser tool measurement for measuring tool length and diameter 3D quickSET Arrangement for external pallet management Accuracy package Internal coolant supply Electrical cabinet active cooling unit Spindle active cooling unit Toolholders are not included Tools are not included Bedsxv Av Ropfx Ac Tjwt Paper band filter Machine running times Under power: 62983 Spindle Working: 39945 Rated power kVA: 60 Basic machine dimensions / weight Length mm: 5500 Width mm: 2650 Height mm: 2900 Weight kg: 9500 + system 3R

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, input voltage: 400 V, travel distance X-axis: 3,220 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, number of slots in tool magazine: 55, total height: 3,600 mm, total length: 7,500 mm, total width: 4,200 mm, overall weight: 15,500 kg, table length: 3,900 mm, table width: 750 mm, controller model: Heidenhain, distance table center to spindle nose: 720 mm, spindle motor power: 35 W, rapid traverse Z-axis: 40 m/min, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, spindle speed (max.): 18,000 rpm, spindle speed (min.): 30 rpm, table load: 3,500 kg, tool diameter: 80 mm, tool length: 330 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Vertical machining center with traveling column "HEDELIUS mod. CB80 MAGNUM" with Heidenhain TNC-530 Bedpfx Aev Sdc Usc Tewt

Condition: ready for operation (used), Year of construction: 2021, operating hours: 435 h, total height: 1,065 mm, total width: 645 mm, overall weight: 114 kg, travel distance X-axis: 165 mm, product length (max.): 685 mm, number of axes: 3, Plastic 3D printer manufactured in 2021. This FORMLABS Fuse 1 features a build volume of 165 x 165 x 300 mm and a hopper capacity of 8.5 kg for PA12 nylon. It operates with a laser type of Ytterbium Fiber and has a maximum part size of 15.9 x 15.9 x 29.5 cm. If you are looking to get high-quality 3D printing capabilities, consider the FORMLABS Fuse 1 machine we have for sale. Contact us for further details. Formlabs Fuse 1 • Build Volume 165 x 165 x 300 mm 6.5 x 6.5 x 11.8 in • Layer Thickness 110 microns 0.004 in • Build Speed 10 mm per hour 0.39 in per hour • Laser Type Ytterbium Fiber • Laser Spot Size 200 microns 0.0079 in • Material Refresh Rate 30 to 50 percent Bwjdpfsy Sy Nvox Ac Tet • Hopper Capacity 8.5 kg PA12 nylon 18.7 lb • Dimensions 685 x 645 x 1065 mm • Maximum Part Size 15.9 x 15.9 x 29.5 cm 6.3 x 6.3 x 11.6 in • Minimum Access Dimensions 125.5 x 149.5 x 187.0 cm 49.4 x 59.0 x 73.6 in • Printer Dimensions 64.5 x 68.5 x 107 cm 165.5 cm with stand • Weight 114 kg • Startup Time 60 minutes • Operating Environment 18 to 28 degrees Celsius 68 to 82 Fahrenheit less than or equal to 30 percent humidity • Internal Temperature 200 degrees Celsius 392 Fahrenheit • Temperature Control Quartz tube heating elements PTC cartridges • Air Handling pressure controlled two stage filtration HEPA and carbon • Power Requirements EU 230 VAC 7.5 A US 120 VAC 15 A • Galvanometers Formlabs custom • Laser Wavelength 1065 nm • Laser Power maximum 10 watts • Beam Divergence 4.01 mrad • Laser Class Class 1 • Connectivity WiFi 2.4 GHz Ethernet 1000 Mbit USB 2.0 • Touchscreen 10.1 inch 1280 x 800 • Control Brand Formlabs • The display is damaged however this does not affect the function Fuse Sift OPTIONAL: Fuse Sift price on request • Fuse Sift Dimensions 99.1 × 61.0 × 188.8 cm 39.0 × 24.0 × 61.8 • Fuse Sift Weight 93 kg without build chamber or powder 205 lb • Build Chamber Dimensions 27.9 × 34.2 × 48.9 cm 11.0 × 13.5 × 19.3 in • Build Chamber Weight 11 kg 17.6 kg full with 20 percent packed powder 24.3 lb 38.8 lb • Build Volume 16.5 × 16.5 × 30.0 cm 6.5 × 6.5 × 11.8 in • Fresh Powder Hopper Capacity 8.5 kg Nylon 12 18.7 lb • Used Powder Hopper Capacity 9.1 kg Nylon 12 20 lb • Air Filtration Technology replaceable HEPA filter • Operating Environment 18 to 26 degrees Celsius 68 to 80 Fahrenheit less than or equal to 30 percent humidity • Air Handling negatively pressurized hood with replaceable HEPA filter independent venting system • Power Requirements EU 230 VAC 7.5 A dedicated circuit US 120 VAC 15 A dedicated circuit • Power Requirements high power vacuum EU 230 VAC 10 A US 120 VAC 20 A • Vacuum Requirements auxiliary vacuum with static dissipative grounded components • Sound Emission maximum 76.5 dB

Year of construction: 2022, condition: new, machine/vehicle number: RPM500_OSZ2, Robot-controlled polishing machine RPM500_OSZ2 with oscillation (50 mm) and feed (100 mm) Polishing disc diameter – 1000 mm Drive power – 4 kW Dust extraction nozzle diameter – 100 mm Two units are available. Bwodpfx Acsd Dt D Ij Tet