Used Contactor for sale (190)

Condition: good (used), Contactor, semiconductor contactor, contactor -Max. 22 kW 400 V Bledpfx Aajb A N A Tj Ued -24V-DC -Price: per piece -Quantity: 16 pieces available -Weight: 1.5 kg

Condition: excellent (used), Contactor, semiconductor contactor, contactor -Condition: unused, original packaging -Power: max. 540 A 600 V AC Bledpfx Aaob A N A Ne Uod -Quantity: 1 piece available -Dimensions: 260/250/H230 mm -Weight: 13 kg

Condition: good (used), Motor protection relay, contactor, semiconductor contactor, contactor -500 V 1.5 A -Price: per piece -Quantity: 5 pieces available Bedpfsb A N Amsx Aa Usld -Weight: 0.5 kg

Condition: good (used), Contactor, semiconductor contactor, contactor -Max. 11 kW 660 V -Price: per piece Bodpfob A N Alox Aa Usld -Quantity: 180 pieces available -Weight: 0.5 kg

Condition: good (used), Contactor, semiconductor contactor, contactor -Max. 30 kW 660 V -Price: per piece -Quantity: 17 pieces available Bledpfsb A N Akex Aa Uod -Weight: 2 kg

Condition: good (used), Contactor, semiconductor contactor, contactor Blsdpfx Ajb A N Ahsa Ujd -Max. 18.5 kW 400 V -Quantity: 1 piece available -Weight: 1.5 kg

Condition: good (used), Contactor, semiconductor contactor, contactor -max. 4 kW 400 V/380 V -Price: per piece Bsdpfx Aajb A N Agj Ueld -Quantity: 3 pieces available -Weight: 0.5 kg

Condition: good (used), Contactor, semiconductor contactor, contactor Blodpfxsb A N Acj Aa Usd -Us: DC 24V -Price: per piece -Quantity: 4 pieces available -Weight: 0.7 kg

Condition: good (used), Relays, time relays, heating current monitoring, preheating for generators, contactors, semiconductor contactors, contactors Bljdpfx Asb A Sklsa Usd -T: 1.5-30 sec -U: AC/DC 24 V 50-60 Hz Price: per package -Quantity: 7x Available -Weight: 0.2 kg

Condition: excellent (used), Year of construction: 2017, operating hours: 1,500 h, functionality: fully functional, machine/vehicle number: 17434268, type of input current: three-phase, input voltage: 400 V, electrical fuse: 63 A, input current: 61 A, input frequency: 50 Hz, pressure: 18 bar, stack height: 1,900 mm, total length: 1,600 mm, total width: 750 mm, tank capacity: 410 l, empty load weight: 315 kg, type of cooling: water, Machine Description and Technical Data 2.1 Machine Description The RED COMPACT units are delivered fully pre-assembled and require only electrical connection and hydraulic hookups on site. Main Components: A: Self-supporting frame with stainless steel cladding (panels 1–6 removable) Bsdpfexvca Aox Aa Ujld B: Basin with evaporator C: Condenser unit D: Temperature controller E: Control cabinet F: Hydraulic circuit with pump (second pump optional) 2.2 Structure The compact monoblock housing contains all components necessary for operation. The external cladding is made of stainless steel; individual panels can be removed for maintenance purposes. 2.3 Basin The stainless steel basin houses the evaporator block. It is insulated with high-density polyurethane foam. A blower ensures water circulation within the basin. 2.4 Condenser Unit The condenser unit can operate with either cooling tower or well water, depending on order specification. It supplies the evaporator block and is located beneath the basin. 2.5 Temperature Controller The controller is a modern microcomputer with a high-resolution display and LED indicators for operating status. The control system is programmed to offer maximum operational safety with easy user operation. 2.6 Control Cabinet The control cabinet is dust- and splash-proof. It contains: - Main and emergency switch - Contactors, thermal relays, fuses - Safety transformer for control circuits Access is provided by removing panel 1 below the temperature controller. 2.7 Hydraulic Circuit with Pump Panel 3 is removed for connection. The following connections are provided: A – Water make-up (T1): Connection to water supply; fill level is controlled via float valve. B – Return line (T2): Return flow from the consumers. C – Overflow (T3): Connection to the process wastewater outlet. D – Chilled water outlet (P1): Supplies the consumers; open the shut-off valve before commissioning. A second pump (P2) is available as an option. E – Condenser water supply: The shell-and-tube condenser can be operated with well water or cooling tower water: Scheme A – Well Water: Use the small connections C1, C2 (inlet and outlet). The large connection remains closed. A pressure-regulated valve control can be installed as an option. Scheme B – Cooling Tower Water: Use C3 and C1/C2 in parallel to increase the flow cross-section. It is recommended to install a mechanical filter at the water inlet to prevent contamination. Manufacturer: FIC S.p.A. – Via Trivulzia 54, 23020 Mese (SO), Italy Model: RED COMPACT V.7

Condition: good (used), Semiconductor relays, switchgear, switching components, semiconductor contactors, relays -Manufacturer: Crydom, Semiconductor relays -Type: ELS4850S -Number: 29 relays available -Price: per piece -Dimensions: 100/50/H130 mm -Weight: 0.5 kg/pc. Bedpfxsx Hfums Aa Usld

Condition: used, Year of construction: 2022, functionality: fully functional, overall weight: 220 kg, total length: 610 mm, total height: 2,000 mm, total width: 805 mm, input voltage: 400 V, control cabinet height: 2,000 mm, control cabinet length: 610 mm, control cabinet width: 805 mm, input frequency: 50 Hz, control voltage: 230 V, protection type (IP code): IP20, We are offering this used Eskap ESR-7000 (-S485) power factor correction system, 100 kvar, year of manufacture 2022. Ready-to-connect, regulated power factor correction system for the automatic compensation of reactive power, ESKAP modular design in accordance with IEC / DIN EN 61439-1 and -2, IEC / DIN EN 60831-1 and -2 and DIN EN 61921. Rated voltage: 230 / 400 Volts, 50 Hz Rated power: 100 kvar, step power: 25 kvar Configuration: 2 x 25 – 50 kvar, expandable in the same cabinet up to max. 200 kvar Modules spaced approx. 100 mm apart Contactors with pre-charging resistors for damping inrush current peaks Group protection with NH fuse-switch disconnectors MKP three-phase capacitors with discharge resistors, UN = 525 Volt 7% detuned to protect against ripple control frequencies > 228 Hz Reactors with high linearity, temperature monitoring Temperature class T40/B, insulation class F 12-step four-quadrant controller with self-adaptation Ventilation via ball-bearing roof fans Permissible ambient temperature: -10°C to +35°C (24h average), +40°C (short-term max) ESKAP floor-standing cabinet, dimensions 2000 x 805 x 610 mm (H x W x D) Bledpfx Aaeyiryye Uod Protection class 1, IP20, color: RAL 7035 Cable entry from below, door hinge right, weight approx. 220 kg If you have any questions or need further information, please feel free to send us a message or call us.

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 MACHINESEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales territory in Germany (Rhine-Main area and North Rhine-Westphalia). These enquiries will not be answered. Features and technical data: • Robust, space-saving 2-belt wide belt sander for demanding pre- and finish sanding • Constant working height thanks to adjustable top section • Working width: 1,350 mm • Overhead sanding, with 2 sanding units • 1st unit equipped with a grooved rubber contact roller of proven hardness • Pneumatically (program controlled) adjustable contact roller; contact roller height continuously adjustable according to a sanding grit scale • 2nd unit equipped with an electronically controlled, segmented sanding pad (segment width 35 mm) and quick-change graphite wear strip • Parallel spring-mounted, ground steel pressure roller at the infeed • Rubber-coated pressure rollers between sanding units and at the outfeed • Motor: 15 kW (20 HP), 400 V/50 Hz, with soft start for reduced current draw during startup • Motorized, fine-adjustable height adjustment with digital display • Belt tensioning, tracking, and oscillation are pneumatically controlled, compressed air consumption approx. 4 l/min • Optimal safety thanks to automatic emergency stop with disc brake in case of belt breakage • Workpiece feed: 0.75 kW (1.0 HP) with fabric-reinforced rubber conveyor belt • Fully integrated electrical system with contactor control; automatic star-delta start for the main motor, motor protection, and ammeter for monitoring material removal • Maximum passage height: 200 mm • Sanding belt dimensions: 1,350 x 2,000 mm Blsdpfeuhiq Djx Aa Uod Comfort features: • Automatic thickness adjustment across the entire working width • Workpiece overthickness protection with immediate feed stop and automatic lift of the machine top section • Continuous adjustment of material removal • Electronic feed rate control at the operator panel, stepless from 3 to 15 m/min • PLC control/programming with color touch-screen and TEACH-IN memory function (store parameters at the push of a button based on sanding results, i.e., no manual data entry required) • Pneumatic conveyor belt tracking control • Workpiece support rollers at infeed and outfeed • Enormatic: Fully automatic quick setup and feed solution • eco*-Energy saving mode • Error diagnosis • Job and operating hour counters • Machine in E-Plus version (RE) Including outfeed table extension, 1,350 mm, foldable, without insert plate Location: Solingen Availability: short-term

Condition: new, Siemens 3TF53 22-1DB4 contactor 110kw 400V AC-3 ,unused in opened original box, 100% working, scope of supply acc. photos Bljdpfx Aaoi Eda He Ujd

Condition: new, Siemens 3TF53 22-1DB4 contactor 110kw 400V AC-3 ,unused in opened original box, 100% working, scope of supply acc. photos Bledoi Eda Rjpfx Aa Ued

Condition: new, Year of construction: 2025, total height: 4,000 mm, total length: 7,000 mm, total width: 3,000 mm, warranty duration: 24 months, temperature: 80 °C, air demand: 36,000 m³/h, input voltage: 380 V, heating capacity: 345 kW (469.07 HP), power: 40 kW (54.38 HP), fuel: liquid petroleum gas (LPG), energy consumption: 40 kWh, insulation material: Mineralwolle, insulation thickness: 50 mm, nominal power: 345 kW (469.07 HP), Equipment: lighting, MAIN STANDARD Our paint booths are designed to meet all necessary requirements for paint application, including air filtration, extraction, lighting, and a controlled environment. Booth processes are managed via a PLC system, ensuring that desired values are maintained consistently. OPERATING PRINCIPLES OF THE BOOTH The booth’s processes are managed through a control panel, which oversees the following steps: PAINTING PROCESS During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled through the extraction unit. Floor filters (paint stop filters) collect paint particles, and the air passes through final exhaust filters before being discharged. FLASH-OFF PROCESS After painting, the booth continues operating for approximately 15 minutes to purge residual solvents and thinners. During this phase, fresh air circulates from outside into the booth. DRYING PROCESS In this stage, 80% of the air passing through the booth is heated to 60°C and introduced via a distribution system. Since 20% of the solvent is released during drying, it is expelled with the exhaust air. Industrial coatings are typically dried at 60°C, but the booth temperature can be adjusted as needed via the control panel. COOLING PROCESS After the 30-minute drying cycle, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the subsequent 5-minute cooling phase, fresh air from outside circulates through the booth, after which the system shuts down automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT Blsdpfxewzmcbe Aa Usd These control panels govern the functions and operation of machines and devices housed within the booth. The panel is made of durable galvanized sheet and steel profiles and is fully enclosed to protect against dust and moisture. Electrical Equipment and Control Panel: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control connections between the control panel and motors or other electrical devices. • Electrical wiring is designed to accommodate booth relocation if needed. • Operating equipment uses 380 V 50 Hz, while control devices operate at 220 V. • The booth’s operation time can be monitored on the electronic control panel, enabling straightforward maintenance scheduling. • Temperature and time settings for booth ventilation (solvent flash-off), intermediate drying, and final drying can be easily adjusted to required values on the digital display of the electronic control panel. • Users can monitor and adjust the drying time using the heating thermostat and time relay.

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 5,600 mm, total length: 11,200 mm, total width: 5,100 mm, type of input current: three-phase, warranty duration: 24 months, inner dimension height: 4,970 mm, inner dimension length: 11,000 mm, temperature: 80 °C, inner dimension width: 5,000 mm, air demand: 52,000 m³/h, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), power: 45 kW (61.18 HP), fuel: liquid petroleum gas (LPG), input frequency: 50 Hz, energy consumption: 45 kWh, insulation thickness: 50 mm, nominal power: 250 kW (339.91 HP), sheet thickness steel (max.): 2 mm, Equipment: lighting, * Air Preparation Unit: The air preparation unit is a recirculation system that supplies the cabin with filtered fresh air and exhausts used air during the painting process. It heats the air to 60 °C, mixes the used air with 10% fresh air via an automatic multi-damper system, and reheats the air before routing it back into the cabin. The air is heated using a burner and a heat exchanger, both made of high-quality 304 stainless steel and housed within the fresh air unit. During painting, the air is filtered twice (via front and ceiling filters) before it enters the cabin. The contaminated air is also filtered twice (through inlet and outlet filters) before it exits via the exhaust unit. Air preparation units are insulated like the side walls to minimize heat loss and are protected against potential vibration and noise thanks to rubber seals on the covers. The exhaust air is regulated by a damper in the outlet duct, which helps control the internal pressure of the cabin. * PRINCIPLES OF CABIN OPERATION: The processes in the cabin are controlled via a control panel that manages the following steps: * PAINTING PROCESS: During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled by the extraction unit. Floor filters (paint stops) capture paint particles, and the air passes through the final exhaust filters before being discharged. * FLASH-OFF PROCESS: After painting, the cabin operates for approximately 15 more minutes to purge residual solvents and thinners. During this phase, fresh air from outside continues to circulate in the cabin. Blodpfxjwzl Hxe Aa Uod * DRYING PROCESS: In this phase, 80% of the air passing through the cabin is heated to 60 °C and supplied to the cabin via a distributor. As 20% of the solvent is released during drying, these solvents are expelled with the exhaust air. Industrial coatings are typically dried at 60 °C, but the cabin temperature can be adjusted via the control panel as required. * COOLING PROCESS: After the 30-minute drying process, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the 5-minute cooling phase, fresh air from outside circulates in the cabin, after which the system stops automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT: These control panels manage the functions and operation of all machinery and devices inside the cabin. The control panel is constructed from durable galvanized sheet metal and steel profiles and is fully enclosed to protect against dust and moisture. Electrical devices and control panels: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control lines between the panel and motors or other electrical devices. • Electrical wiring is designed to allow for cabin relocation if necessary. • Operating devices use 380 V 50 Hz, while control devices use 220 V.

Condition: used, Year of construction: 2017, liter capacity 980 l Pressure of pump 8 / 20 / 80 bar control Schütze / Contactors weight of the machine ca. 765 kg dimensions of the machine ca. 2,3 x 2,0 x 1,8 m Coolant System MAYFRAM - DPF400-V980 SKD (BFU 980 /S/20+/8) - NEW, unused - universally applicable - can be controlled via contactors - incl. paper band filter - Number of pumps: 3 Bedpfx Aajx Ak Eyo Uold - Pump capacity: 4.0 kW, 2,917 rpm, 5.8 m³/h, 96.6 l/min, pressure 25 bar, max. temp. 90°C 3.0 kW, 3,514 rpm, 20.5 m³/h, 341.66 l/min, pressure 25 bar, max. temp. 90°C -.- kW, 2,864 rpm, 2.0 m³/h, 33.3 l/min, pressure 25 bar, max. temp. 90°C

Condition: used, Year of construction: 2019, liter capacity 980 l Pressure of pump 8 / 20 bar control Schütze / Contactors weight of the machine ca. 560 kg dimensions of the machine ca. 2,3 x 2,0 x 1,8 m Bljdpfxox Ak Ets Aa Uod Coolant System MAYFRAN - BFU 980 /S/20+/8 - NEW, unused - universally applicable - can be controlled via contactors - incl. paper band filter - Number of pumps: 2 - Pump capacity: 4.0 kW, 2,917 rpm, 5.8 m³, 96.6 l/min, pressure 25 bar, max. temperature 90°C -.- kW, 2,864 rpm, 2.0 m³/h, 33.3 l/min, pressure 25 bar, max. temperature 90°C

Condition: refurbished (used), Year of construction: 1989, functionality: fully functional, cutting width (max.): 560 mm, cutting length (max.): 790 mm, overall weight: 7,000 kg, working width: 560 mm, We offer this refurbished Gietz FSA 790 machine, type: paper cutting machine, year of manufacture: 1989. Manufacturer: Gietz Model: FSA 790 Year of manufacture: 1989 Condition: refurbished Machine type: paper cutting machine If you have any questions or require additional information, please contact us by message or phone. Max sheet size: 790 x 560 mm Temperature control: up to 200° C Max pressure: 150 tons Speed: 5,500 cycles/hour Power consumption: 7.3 kW Heating power: 9.5 kW Weight: 7,000 kg 3x electronic longitudinal foil feed control Works with foil on 1’ cores Capability for both longitudinal and cross foil feed relative to sheet travel 6 heating zones 3 transverse drives 3 longitudinal drives Blodpfx Aaoygkxce Ujd 2 die mounting plates – honeycomb type High-speed suction feeder Machine is in excellent condition, fully overhauled. The electrical cabinet has been modernised to current standards and fitted with the latest control system (automatic contactors). Die-cutter mounting frame included.

Condition: excellent (used), Year of construction: 2023, operating hours: 1,600 h, functionality: fully functional, overall weight: 26,600 kg, fuel type: diesel, tank capacity: 4,500 l, color: white, power: 1,800 kW (2,447.32 HP), output current: 3,260 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 1,800 kW (2,447.32 HP), nominal power (apparent): 2,250 kVA, total length: 12,196 mm, total width: 2,500 mm, total height: 2,960 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: MTU, type of cooling: water, 3 Units Super Silent Generator Containers MTU 16V4000G63 – 2,250 kVA Many other sizes available: 1,000–2,500 kVA! For sale are 3 soundproof generator containers equipped with MTU 16V4000G63 diesel gensets (manufacture year 2016), installed in purpose-built super-silent containers (manufacture year 2024). These gensets are engineered for demanding emergency power applications and are housed in acoustically optimized high-cube containers. Container Design: Super Silent, acoustically insulated Quantity: 3 units (2 × right-hand layout, 1 × left-hand layout) Dimensions (incl. exhaust): 12,192 × 2,500 × 3,050 mm Weight: approx. 26,600 kg (empty tank) Color: RAL 9010 (white) Fuel tank: 4,600 liters integrated Generator (Genset) Output: 2,250 kVA Ambient temp.: 25°C Voltage: 400 V, 3-phase Frequency: 50 Hz and 60 Hz Speed: 1,500 / 1,800 rpm Engine: MTU 16V4000G63 Blsdpfoyf U Uxex Aa Uod Control: DEIF AGC-4 MK2 Alternator: Mecc Alte ECO46 2L/4A with MAUX excitation Cooling: 25°C radiator with electrically driven fan Circuit breaker: Schneider Electric NW04, 4-pole, 4,000 A, motorized, 100 kA Equipment Star-point circuit breaker for open-neutral operation Neutral earthing contactor with CT Automatic pre-lubrication pump Centrifugal oil filter (MTU) Fuel return cooler Water separator fuel filter 9 kW water pre-heater (400 V) Intelligent battery charger (DEIF, 10 A) Location: Eferding, Austria Availability: immediately Price: on request

Condition: like new (used), functionality: fully functional, machine/vehicle number: FDL-150-100E/NC, total length: 1,200 mm, pressing force: 150 t, table width: 800 mm, working height: 600 mm, clearance between the columns: 1,250 mm, Equipment: documentation/manual, safety light barrier, DOUBLE-COLUMN HYDRAULIC PRESS WITH TWO SIDE CYLINDERS FOR PRE-PRESSING AND PRESSING OF ROTORS AND STATORS, AND A CENTRAL CYLINDER FOR ROTOR SHAFT EXTRACTION, AS WELL AS FOR SHAFT EXTRACTION IN CASE OF REPAIR It features an extendable table for stacking and handling rtors and stators. It meets and satisfies all essential safety and health requirements according to CE regulations. STRUCTURE AND TABLES • Consists of a rigid fixed bench welded structure made exclusively from S355JR steel. • Stabilized and machined at the end of the welding process to ensure perfect parallelism and precision. • Calculated and designed using finite element software. • Mechanically movable grooved table measuring 1200 x 800 mm with a stroke of 1,200 mm, equipped with a worm gear reducer and a 0.5 HP electric motor with brake. • Central drill on the table with a diameter of 250 mm and a maximum depth of 550 mm. Blsdpfx Aswpg Awoa Uod • Useful lifting capacity of the table for moving 4 tons. • Movement speed of 30 mm/sec. • Front interior width of 1250 mm (space between columns). • Working height of 600 mm. MAIN CYLINDERS: 150 TN • Two 75-ton hydraulic cylinders (150 tons total), with a stroke of 1200 mm connected by a plate with a central hole of 250 mm in diameter. • Maximum useful height of the cylinder plate: 1,440 mm. • Minimum useful height of the cylinder plate: 200 mm. ABSTRACTION CYLINDER • One 100-ton central cylinder with a stroke of 1200 mm. • Designed to accommodate an abstraction clamp, end of the rod threaded to M 35.150 x 40 mm length. • Maximum useful height of the abstraction cylinder: 1600 mm from the root of the rod thread. • Minimum useful height of the abstraction cylinder: 400 mm from the root of the rod thread. HYDRAULIC GROUP • Two-speed hydraulic group with 5.5 HP power “Siemens Motor”, with automatic disconnection of high speed and independent speeds. Maximum pressure: 250 bar. • Pressure regulation system using proportional valves. • Air-oil cooler. • Temperature sensor. • Hydraulic group located on the right side. ELECTRICAL INSTALLATION AND SAFETY • Equipped with a SIEMENS mod. SIMATIC S7 1200 safety PLC and a 12” HMI touchscreen mod. MTP with 99 memory slots allowing adjustment of pre-pressing power, pressing, calendering, and stroke of the pressing and extraction cylinders, as well as the holding times during processes. • Electrical and hydraulic maneuvers are redundant and self-controlled. They include an additional safety block and self-control devices for operation and safety. Includes verification and certification of correct operation and safety distance for photoelectric cells. • The electrical panel includes a selector for choosing the type of work in manual, semi-automatic, or automatic position and a selector for high-speed or low-speed operation. • Operation is performed via a two-hand low-voltage electrical pushbutton. • All installed electrical materials are Siemens, including relays, contactors, main motor, etc. • Ready for Industry 4.0. • To ensure safety, it includes category IV photoelectric barriers located in the front work area, two fixed side guards, and a practicable rear guard with a magnetic disconnection detector.

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 1845/455, Completely refurbished: Mechanics, geometry, hydraulics, and electrical components Wheelhead Disassembly, cleaning of parts, replacement of worn and defective components, motor overhaul, replacement of bearings, replacement of belts, spindle disassembly, replacement of seals and O-rings, plus adjustment. New paintwork. Workhead Disassembly, cleaning of parts, replacement of worn and defective components, motor replacement, replacement of belts. New spindle bearings. New paintwork. Tailstock Disassembly, cleaning of parts, replacement of worn and defective components, motor replacement, replacement of belts. New spindle bearings. New paintwork. Internal grinding attachment Disassembly, cleaning of parts, replacement of worn and defective components, installation of the support and geometry alignment. New paintwork. Hydraulics Disassembly, motor replacement, hose replacement, defective and worn parts replaced. Hydraulic block checked. X-Axis Disassembly, replacement of worn items such as O-rings, seals, rings, etc., overhaul of hydraulic piston, regrinding of tables. Z-Axis Disassembly, regrinding of tables, replacement of worn and defective parts, overhaul of hydraulic piston, scraping of V and flat guides. New paintwork. Bsdpfx Asxt Ilfea Ueld Measuring system Digital 2-axis display included. Electrical cabinet Replacement of motor contactors and relay controls. New wiring. New variable speed drive (frequency inverter) for the workhead. TECHNICAL SPECIFICATIONS Distance between centers: 1500 mm Distance between centers (workhead to tailstock overhang): 1650 mm Center height, standard: 125 mm Center height with riser blocks: 225/250 mm Maximum grinding diameter: Ø 250 mm Maximum grinding diameter with riser blocks: 450/500 mm Table Usable surface: 2060 x 140 mm Max. length and width for surface grinding: 1750 x 200 mm Longitudinal travel, manual or hydraulic: 1750 mm Manual table movement, 1 handwheel revolution – coarse: 20.006 mm Manual table movement, 1 handwheel revolution – fine: 2.457 mm Table speed, continuously via hydraulics: up to 6 m/min Table swivelling: 6° Stop and return: 0–5 sec. Workspindle Workpiece speeds, continuously variable (electric): 20–400 rpm Swivelling: 360° Workspindle taper (internal): MT5 Tailstock Internal taper, tailstock spindle: MT3 Spindle retraction, manual or hydraulic: 30 mm Diamond dresser taper (internal): MT0 Universal grinding head Cross slide travel for wheel: 285 mm Rapid traverse for wheel slide, front and rear: 40 mm Grinding spindle speeds: 1500 – 1700 – 2200 – 3600 rpm Vertical grinding spindle movement, center heights: 125–330 mm Max. wheel for cylindrical grinding: 400 x 50 x 127 mm Max. wheel for surface grinding: 250 x 20 x 76 mm Head swivelling with locking at every 90°: 270° Wheel feed 1 division of the micrometer drum: 0.005 mm/Ø Automatic wheel feed, max.: 0.9 mm/Ø Motors Grinding spindle motor: 2,900 rpm / 4.0 hp Workspindle motor: 3,000 rpm / 2.0 hp Coolant pump motor: 2,850 rpm / 0.12 hp Internal grinding attachment Bore: 70 mm Internal grinding spindle speed Ø70 mm: 14,000 rpm Internal grinding spindle speed Ø50 mm: 21,000 rpm Subject to error or omission, the technical information is provided without obligation.

Condition: excellent (used), Year of construction: 2008, machine/vehicle number: 0803024, functionality: fully functional, 4-SIDED PLANKER-MOULDER 5 REINFORCED MOTOR TOOL HOLDERS & 3.00 M CHROME TABLE Brand: LEADERMAC Type: SMARTMAC 523 Model: LMC-523SU Serial No.: 0803024 Year: 2008 (Photos taken before servicing & cleaning) MAKING CAPACITIES: - 4-sided planer and moulder - Max. cross-section: 130 x 230 mm - Thicknesses: 10 to 130 mm - Widths: 15 to 230 mm - Minimum length for single workpiece: 600 mm > 760 mm with use of the universal spindle - Adjustable infeeds: max. 10 mm Bedpfev Tzw Ejx Aa Ujld - Spindle speed: 6000 rpm PLANKER COMPOSITION: - Robust frame Welded machine shop - Secure, soundproof, and fully panoramic enclosure on gas struts with interior lighting - Digital counters (Siko type) for precise manual adjustments of each operation - Raised control panel and operator face - Cast steel infeed table (LxW): 2980 x 255 mm Table height from ground: 900 mm - Side infeed spring-loaded pusher - Digital pass-taking indicators 1) Planer spindle 7.5 kW Tool holders Ø125 x L.230 mm 2 & 3) Right & left vertical spindle 12 kW Tool holders Ø125 x L.130 mm 4) Upper horizontal spindle with independent adjustment 11 kW Tool holders Ø125 x L.230 mm - Adjustable pressure shoe at the output 5) 360° universal spindle 11 kW Spindle Ø 50 x L. 240 mm - Vertical idler wheel presser DRIVE: - Feed with variable speed drive: 6 to 24 m/min Drive motor: 3 kW - Helical steel infeed roller in the table Cardan shaft drive - 7 pneumatic pressure rollers 2 notched steel rollers 3 (1 retractable) + 2 rubber-coated rollers - One smooth steel roller in the table at the planer outlet OTHER FEATURES: - Main power supply: 400V. Three-phase + T 50 Hz - Installed power: 53 kW (72 hp) IN 95.6 A - Automatic star-delta starting - Motors with brakes - Toothed belt drive - Electrical thickness adjustment by raising and lowering the beam. 0.37 kW motor - Shaft diameter: Ø50 mm - Minimum working air pressure: 6 bar - Suction: 5 x Ø 120 mm Recommended flow rate: 6100 m3/h Speed: 20 to 28 m/sec depending on the humidity of the wood being machined - CE marking - Padlockable contactor, mushroom stops Dimensions in operating order (W x H): 3000 x 2250 mm Dimensions: 5100 x 2000 x H 1810 mm Weight: 4300 kg Machine supplied with mounted sharpening irons, manual, spare parts list, and diagrams. Please contact us for consumables, accessories, and/or vacuum systems. Upon request, the machine will be serviced and brought into compliance, with inspection and dynamic functional testing. With a 3-month warranty and certificate of compliance. Ex-stock price excluding VAT. Delivery and additional services upon request.

Condition: used, Year of construction: 1976, Used machine Year of manufacture: 1976 Equipment and technical data: - Bottom sanding - Material feed via rubber rollers - Contactless oscillation control - Quick-change pressure beam - Electromotive adjustment of tool thickness with easily readable digital display - Pushbutton with contactor control - Sanding width: 1350 mm - Maximum workpiece thickness: 150 mm - Sanding belt width: 1360 mm - Sanding belt length: 1900 mm - Roller feed switchable between 10 and 20 m/min Bjdpfx Aaowpm I Tj Usld - Compressed air connection: 6 bar - Air consumption: approx. 180 NL/min Availability: short-term Storage location: 63934 Röllbach