Used Automated Lines for sale (21,620)

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, workpiece height (max.): 60 mm, roll diameter: 830 mm, On-site inspections while the machines are running are possible in Lithuania! Fully automatic edge banding line with the following machines: HOMAG PROFI KAL330/9/A3/WZ (year of manufacture 2013) HOMAG PROFI KAL370/8/A3/WZ (year of manufacture 2016) HOMAG PROFI TBL100/20/30/F infeed table (year of manufacture 2013) HOMAG POWER TWL410/25/LQ transfer system cross conveyor (year of manufacture 2016) TECHNICAL DETAILS HOMAG PROFI KAL330/9/A3/WZ & PROFI KAL370/8/A3/WZ edge banding machines Workpiece width without edge at a workpiece thickness of 12–22 mm: min. 60 mm (depending on the workpiece length) Workpiece width without edge at a workpiece thickness of 23–60 mm: min. 100 mm (depending on the workpiece length) Workpiece overhang: 30 mm Workpiece thickness: 12–60 mm Edge height: max. workpiece thickness + 4 mm Edge material on a roll: 0.3–3 mm Prjdpfxoz A Tx Te Ac Asb Edge material height PVC: max. 135 mm Edge material height veneer: max. 100 mm Roll diameter: max. 830 mm HOMAG PROFI TBL100/20/30/F infeed table Roller diameter: 54 mm Roller spacing: approx. 60 mm Panel length: 240–2,500 mm Panel width: 120–3,000 mm HOMAG POWER TWL410/25/LQ transfer system cross conveyor Roller diameter: 64 mm Roller spacing: 110 mm Panel length: 240–2,500 mm Panel width: min. 240 mm Panel thickness: 8–60 mm Panel weight: max. 80 kg EQUIPMENT Clearance-type joining-cutting unit on both edge banding machines A3 basic gluing unit on both edge banding machines Clearance-type processing units on both edge banding machines FA11 finishing unit on the HOMAG PROFI KAL330 FA21 finishing unit on the HOMAG PROFI KAL370 Fixed stop on the left side of the infeed table Transport rollers on the infeed table Side conveyor belt on the infeed table Electropneumatically controlled cross guard on the infeed table Manually adjustable infeed guard Set of small parts Integrated air cushion table Fixed stop on the left side in the infeed and outfeed of the transfer system cross conveyor Infeed roller track with conveyor belt and cross transport Controlled cross conveyor in the infeed Outfeed roller track Controlled cross conveyor in the outfeed Electropneumatically controlled stop guard Side transport belt Manually adjustable panel overhang

Condition: good (used), Year of construction: 2015, operating hours: 26,407 h, functionality: fully functional, BLM Group ADIGE-SYS EM 80 – automatic bandsaw for tubes and profiles, year 2015 We offer for sale a fully automatic bandsaw, the BLM Group ADIGE-SYS EM 80, designed for efficient cutting of tubes and profiles in series production. The machine is equipped with Siemens SINUMERIK CNC control and an automatic material feeding system. This makes it suitable for repetitive production of larger series, with an emphasis on productivity and accuracy. Key technical data: Manufacturer: BLM Group / ADIGE-SYS Model: EM 80 Year of manufacture: 05/2015 Control system: Siemens SINUMERIK Operating hours: approx. 26,400 h Tube cutting range: Ø 10–80 mm Max. length of finished part: 600 mm Total installed power: 38 kW Power supply: 380 V / 50 Hz / 3 phases Machine weight: approx. 8,500 kg Equipment and accessories: automatic material feeding system fully automatic working cycle multiple working / tool positions complete enclosure of the working area extensive set of interchangeable clamping jaws for various diameters supply and feeding section of the line Siemens SINUMERIK CNC control technical documentation in German complete electrical documentation The machine is particularly suitable for series production of shorter parts from tubes and profiles, where high repeatability, cutting accuracy and automated operation are important. Machine condition The current owner purchased the machine approximately two years ago for a planned production project, which was ultimately not realized. For this reason, the machine has not been used in regular production since its purchase. The seals of the hydraulic brake on the machine bed have been overhauled. The offer also includes the accessories and set of clamping jaws shown in the photos. Pedpfxsz Di Rno Ac Ajrb The machine can be inspected by prior arrangement.

Year of construction: 2020, operating hours: 10 h, condition: like new (used), functionality: fully functional, Automatic line for rinsing, filling, pasteurizing, drying and packaging of glass juice bottles consisting of following modules: 1. SEMI AUTOMATIC DEPALLETIZER (model: Depal 512 – mini) for unpacking glass bottles from pallets, 1 operator required to put the pallet into the machine and remove the cardboard that is inserted in between the glass bottle layers 2. UNIVERSAL RINSING MACHINE (model: IND-Wash 56 S2) for steam sanitizing and hot water rinsing of the bottles before filling Pjdpfxszdr Ilj Ac Aorb 3. ROTARY FILLING MACHINE (model: IND-Dose 46 PO-12) for filling of the hot product into the glass cylinder shape bottles 4. CLOSING MACHINE FOR TWIST OFF CAPS (model: IND-Close 12E) for vacuum closing of the filled bottles using steam injection induced vacuum system 5. PASTEURIZATION AND COOLING TUNEL (model: PT 42-9) for further continuous pasteurization of the product 6. VACUUM TESTING MACHINE (model: IND-Test 61) for selection and eviction of the improperly closed bottles 7. DRYING MACHINE (model: IND-Blow 86) for drying the residual moisture on the battle surface before applying labels 8. LINEAR LABELLING MACHINE FOR APPLICATION OF SELF-ADHESIVE LABELS (model: IND-Lab 32B) with top (over the cap) and side application of the labels on cylindrical bottles 9. AUTOMATIC GROUPING AND SHRINK-WRAPPING MACHINE WITH TRAY AND FILM (model: IND-pack 29 T) for packing the bottles onto cardboard trays in various configurations per different bottle sizes 10. SET OF FLAT TOP CHAIN CONVEYORS (model: IND-Trans 71) connecting the various modules of the line (conveyors between rinsing, filling and closing sections with top covers)

Year of construction: 2011, condition: good (used), functionality: fully functional, machine/vehicle number: K 0122, Equipment: CE marking, For sale: industrial machine K. Schulten KS AluKap 350-3, designed for the production of roller shutters with armored slats. The machine has been in use for 10 years. Technical data: - Manufacturer: K. Schulten GmbH & Co. KG – Germany - Model: KS AluKap 350-3 - Year of manufacture: 2011 - Machine number: K 0122 - Maximum slat width: 3500 mm - Minimum slat width: 500 mm - Power supply: 400 V / 50 Hz / 2.5 kW - Air consumption: approx. 250 l/min - Pneumatic system pressure: 8 bar - Weight: approx. 900 kg - CE marking Condition: used, operational. Reason for sale: replacement with a newer model. Pedpfozxcn Eox Ac Aorb The machine will be available for collection in approximately 3 weeks. You are welcome to visit and see the machine in operation. Price: 20,000 EUR net.

Condition: ready for operation (used), -packet-jointing line -for timber infeed 900-5.100 mm -double-roller conveyor -cut saw with marking recognition 15 KW -packaged -finger jointing milling automate 80 KW -singling cross conveyor -roller conveyor -cycle press hydraulic 20 KW -automatic under table circular saw 5 KW -wood widths of 70 - 255 mm -wood thickness from 22 to 140 mm -wood input from 900 to 5100 mm Prodpfx Acobqqzgj Aeb -pressing force 12 tons -capacity from 7.000 to 10.000 meters / 8 h -options example cycle press 25 to or 40 to

Year of construction: 2014, operating hours: 800 h, condition: like new (used), functionality: fully functional, We offer an automatic weighing and packaging line manufactured by BW Packaging Systems (formerly Simionato), built in 2014. The line is designed for the automatic portioning, weighing and packaging of dry food products such as nuts, dried fruits, seeds, cereals, confectionery and other free-flowing products. The machine is in excellent, like-new condition, has less than 1,000 operating hours and has been fully refurbished. It is fully operational, immediately available and ready for production. The weighing system has a capacity of up to 80 portions per minute, while the intermittent packaging unit operates at speeds of up to 40 packages per minute, depending on the product and packaging format. The combined metal detector and checkweigher shown in the pictures is available separately and is not included in the listed price. A complete maintenance history is available for every individual module of the line, including all service records and invoices. Full original CE documentation for the complete system is included, ensuring complete traceability and compliance. Prjdpfx Asznlbgsc Aeb If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 2000, Weinig High Mech E6 infeed + A5 outfeed + stacker 1. Weinig pack infeed roller conveyor. 2. Weing pack tilt 3. Weinig flat chain cross feed conveyor with single board feeder. 4. Weinig reject sorting unit with roller tracks. 5. Weinig EM814 moulder infeed with flat chain feeder. 6. Weinig outfeed 3m belt accelerator conveyor. Prodpfewgbw Rjx Ac Ajb 7. Roller conveyor with cross feed chain kickers. 8. Weinig cross feed buffer belt conveyor. 9. Weinig flat chain stacker with scissors lift roller conveyor. 10. Weinig pack outfeed roller conveyors. Possible to offer with additional Weinig bundling system if needed.

Condition: excellent (used), Year of construction: 2024, operating hours: 2 h, functionality: fully functional, overall weight: 3,320 kg, We offer you our 2-part line here: Pallet stack distributor EPAL 1, 800x1200 mm for stacks of pallets placed on top of or inside each other, with a conveyor belt and a machine for rotating EPAL1 pallets, EPAL1 800x1200mm, TYPE OPZL 800. They are fully functional, but we have not used this machine. Prjdpfx Aezvn Thoc Aob For sale are the first 3/4 of the sorting line. Part 1: Destacking – the stack is loaded and tilted. The pallets individually move onto the conveyor belt. Part 2: Pallets that are rotated due to nesting are turned over by automatic detection. Part 3: The pallets run over a rotary table, where a pallet can be inserted or removed depending on whether it needs repair or to be sorted out. Part 4: The pallets are stacked on top of each other via another conveyor belt. We would prefer to keep the stacker, but we can still come to an agreement if it is absolutely necessary. Please feel free to contact us if you have any questions. The line was ordered new and delivered and tested in July 2025, but unfortunately, it has not been used for current orders and is not planned for use in the near future. Please feel free to contact us if you have any questions. We can gladly send you all the documents.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, total length: 50,000 mm, We offer this Nordson automatic powder coating line, in very good condition, manufactured in 2016. It is fully operational, so you can visit it any day to see exactly how it works. It includes a degreasing area with an acid bath, followed by drying/preheating, painting, and polymerization. Podpez Dhk Hofx Ac Aorb If you have any further questions or require more information, please do not hesitate to send us a message or call us.

Condition: like new (used), Year of construction: 2016, functionality: fully functional, ANCIMO DRG-45 AUTOMATIC FILLING, CAPPING, AND LABELING LINE (2016) Manufacturer: ANCIMO Model: DRG-45 Year: 2016 Condition: Excellent. Very few operating hours. Complete documentation available. DESCRIPTION Prjdpfx Acjzcfqrj Aeb Automatic filling line specifically designed for containers with cups and similar formats, equipped with a high-precision volumetric dosing system using 8 pistons adjustable by a micrometer screw. The equipment is in excellent condition, with few operating hours, and is ready for start-up. It is supplied with complete technical documentation, CE marking, and electrical and pneumatic diagrams. TECHNICAL DATA • Dosing capacity: 25 – 250 cc • Filling system: 8 adjustable volumetric pistons • Maximum production: up to 3,600 containers/hour • Micrometer adjustment of volume for quick and precise changes EQUIPMENT INCLUDED • Pressure capping head • GMS SATRL25 cap feeder hopper • GMS SABV3CIR510 AH circular positioning vibrator • GMS SAVR1 linear feeder • GMS SAENF150 container elevator • GMS SABV5CIR900 AH circular positioning vibrator • GMS SAVR2 linear feeder • Cup loading and unloading system • EIDOS PRINTESS P4E05# labeling/printing machine DOCUMENTATION • Original manuals • CE declaration • Electrical diagrams • Pneumatic diagrams APPLICATIONS Suitable for cosmetic, food, chemical, pharmaceutical, and other liquid or semi-liquid products that require precise and repetitive dosing. ADVANTAGES • Complete production line • Very few operating hours • Excellent overall condition • Complete documentation available • Industrial production up to 3,600 containers/hour • Available for inspection

Condition: used, Year of construction: 2010, operating hours: 2,000 h, functionality: limited functionality, machine/vehicle number: ERW20101111, overall weight: 5,000 kg, wall material: steel, Cleaning line in good visual condition for sale. Specifics: Baths: 10x Bath dimensions(outer size): L2440xW590xH1190mm Additional stainless-steel baths: 2x Stainless-steel bath dimensions(size inner): L600xW600xH700mm Ventilation inlets for toxic fumes(between baths): 4x Psdpfx Aexvxqdoc Aorb Control unit: 1x Crane with electric motor(in working condition): 1x Rails in working condition: 2x Guarding rail with steps: 8119x1000mm Water filter tanks: 2x Combined weight: 5t+ Additional: PVC pipes, stainless-steel mesh, circulation pumps, etc. Overall cleaning line length when assembled: 12050mm Overall cleaning line width when assembled: 4160mm Assembled drawings available. Cleaning line is and was purchased in non-operational state. Located in Latvia. Currently in disassembled condition - as is. Logistics are handled by potential buyer!

Condition: used, 2-axis linear guide with linear motors - Slide arm pick and place with linear guides for automation Loading unit such as Scara robot, manipulator, handling device, handling system, placement gripper, loading gripper for automation Manufacturer SCHUNK - GEMOTEC - AFAG - LINMOT Type PS01-37x240-M + E1100-MT + T01-/72/420 + EPM 37-780 Year of construction approx. 2005 Horizontal axis with linear motor Gemotec type EPM 37-780 Actuator type: EPM 37x780-M Axis module: LinMot type E1100-MT-HC Horizontal movement: 780 mm Nominal force horizontal: 160 N Horizontal speed: 2.1 m/s Horizontal acceleration: 12.4 m/s² Repeat accuracy: +/- 0.05 mm Horizontal load capacity: max. 7000 g Prodpfx Asu H R Iwoc Aob Horizontal guide column: Ø 20 mm Vertical axis with LinMot linear motor type PS01-37x240-M Actuator type: LM01-23x80/160 Axis module: LinMot type E1100-MT Vertical movement 160 mm Nominal vertical force: 44 N Max force vertical: 203 N Vertical speed: 2.2 m/s Vertical acceleration: 50.4 m/s² Repeat accuracy: +/- 0.05 mm Horizontal guide column: Ø 20 mm Power supply unit LinMot type T01-/72/420 (for motor supply) Input voltage: 3 x 400 V AC 50/60 Hz Output voltage: 72 V DC 420 Watt Base frame Support columns: 4 pieces Ø 55 mm Support column height adjustment: 200 mm (manual height adjustment) Mounting foot: 2 x 175 x 90 mm Control voltage: 24 V DC - Can be moved in two axes - Mounting plate for tool holder 66 x 56 mm - Integrated path measurement - Axis modules with integrated positioning control - Festo pneumatic cylinder as holding brake on the vertical axis - Horizontal axis with 3 external fans - Axis modules configurable via LinMot MPC Configurator 3.2 software Space requirement L x W x H: 1120 x 720 x 740 mm Weight: approx. 65 kg Very good condition

Condition: used, Year of construction: 2011, functionality: fully functional, type of input current: three-phase, input voltage: 380 V, power: 9 kW (12.24 HP), We offer for sale a used LINKS S.r.l. automatic zig-zag cotton wool production and packing line, manufactured in Italy in 2011. Manufacturer: LINKS S.r.l., Italy Year of manufacture: 2011 Line configuration: Z/AP + ASA + L/CC Serial numbers: 300–301 Pedpszxnyysfx Ac Asrb The line is designed for the automatic production, zig-zag forming and packing of absorbent cotton wool in polyethylene bags. Technical specifications: Capacity: up to 25 packs/min at 100 g (approx. 1,500 packs/hour) Electrical power: 9 kW Power supply: 380 V / 50 Hz / 3-phase Operation: fully automatic cycle Operators required: 1 Packing/product formats: 50 g, 100 g and 200 g Equipment includes sets of forming/packing chambers for 50/100 g and 200 g Original technical documentation included The line consists of the Z/AP + ASA + L/CC units, covering the zig-zag forming, conveying and pressing stages and automatic packing process. Suitable for production of absorbent cotton wool, medical cotton wool and cosmetic cotton wool. The equipment is sold as used machinery. Further technical information, photographs and original documentation are available upon request. Please contact us for additional information, inspection arrangements or further photographs.

Condition: like new (used), Year of construction: 2023, operating hours: 800 h, functionality: fully functional, total length: 1,400 mm, total height: 2,300 mm, total width: 250 mm, workpiece weight (max.): 72 kg, For sale: Nearly new automatic powder coating line, installed in 2023, with approximately 800 operating hours. Current layout footprint: approx. 12 x 28 m, H 5 m. Price and dismantling timeline subject to individual agreements. Layout modifications available: pre-treatment tunnels can be added, and the curing oven can be reconfigured as a straight-through tunnel suitable for parts exceeding 6 meters in length. We can provide a complete quotation including dismantling and international relocation upon separate arrangement. Excellent opportunity to acquire an almost-new line at a lower price and with much shorter lead times compared to a new installation. Monorail conveyor: - Speed: 0.9 – 3.3 m/min - Automatic lubrication - Automatic chain tensioning unit - Chain pitch: 270 mm - Total length: 131 m - Total load capacity: 9500 kg - Steel supports between the floor and conveyor Automatic powder coating booth Gema: - PVC booth: MagicCompact EquiFlow BA04 - MagicControl 4.0 control panel - Photo-cell frame for automatic gun control - 16 x OptiGun GA03-P automatic guns - 1 x OptiSelect GM04 manual gun - 17 x OptiSpray AP01.1 powder feed pumps - OptiCenter OC07 powder feeding system - Ultrasonic sieve US07 for OptiCenter - 2 x ZA07-23 reciprocators with X-axis automatic control - MonoCyclone EZ05-16, 16,000 m³/h - Powder filter: 16,000 m³/h, 30 kW - Big-Bag system for waste powder collection - CO₂ explosion protection system - Manual spray wall / trolley unit shown in pictures NOT INCLUDED Prodpfxjx H Tadj Ac Asb Powder curing oven: - Hybrid heating (electricity or gas) — offers unique flexibility to choose the most economical energy source - Installed capacity: 300 kW - Max. temperature: 220°C - Siemens PLC control panel

Year of construction: 2016, condition: good (used), for sale: Complete Niverplast packaging line Year of manufacture: 2016 1. Manual infeed Niverplast 2. Depanner for baguettes from AUXPAMA 3. Metal detector 4. Reject system 5. Counter + speedbatcher Niverplast 6. Combiplast Niverplast 7. Boxloader Niverplast 8. Varioseal Niverplast 9. Metal detector 10. Pallet sealing device 11. Conveyor systems Niverplast Full documentation, layout, and specifications available. If you have any questions or comments, please feel free to contact me. Inspection on site is also possible. Prjdex Ari Hopfx Ac Aob Dismantling and transport can be offered. Kind regards, Leo Holland

Condition: used, Manufacturer : Indosa Origin : Suisse Year: 1990 (completely upgraded in 2006 with Siemens PLC)   Main machine: Indosa Matic 100 automatic seamer Filling / dosing: AW7/500 module Vacuum / dust collector: CK-V09 system Accumulation table: ZT800 Transport: 12-station star wheel Product feed: pneumatic transfer   Machine type: Automatic filling and sealing line for cans Box type: metal or composite Applications : Dry and granular products Examples: Tobacco, powder, granules, dry foods, solid products   Capacity: up to 40-50 units/min (integrated speed control) Can diameter Ø 80 mm standard (other sizes available on request) Box heights from 20 to 320 mm Dosing type : Weight (vibrator + bucket) Product supply : Pneumatic transfer Metal cover seaming, integrated seaming module Vacuum Integrated dust collection module CK-V09 Lid storage feeder : Yes Pjdpfx Acjx R Dype Asrb Automatic control   Documents available in digital format.   Status / Additional information: video available in operation

Condition: used, machine/vehicle number: LC618, Used Automatic 18.9L bottling line 500 BPHTechnical Specifications & Performance DataThis automatic bottling line is engineered specifically for large 18.9L bottles, delivering dependable performance for washing, disinfecting, filling, and capping. Designed as a complete, synchronized system, it provides consistent throughput and accurate operations across all stages.Production speed: 500 bottles per hourTotal output: 9450 liters per hourBottle format: 18.9LProcess stations: Washing, disinfecting, filling, cappingFilling heads: 6Operation: Fully automatic lineApplication: Ideal for high-volume, large-format bottle handlingAdvanced Automation & Control SystemsThe line operates with automated sequencing across each station to maintain stable throughput and reduce operator intervention. Controls support straightforward start/stop and changeover procedures to keep change times minimal and maximize uptime.Automatic cycle control for synchronized washing, disinfecting, filling, and cappingCentralized operator interface for status monitoring and adjustmentsSensors and interlocks to help ensure reliable bottle handling and cycle completionQuick setup for 18.9L format with consistent, repeatable settingsProduction Line Integration CapabilitiesThe system is designed to function as a complete line for 18.9L bottles and can be integrated with upstream and downstream handling equipment. Its layout supports straightforward connection to conveyors, accumulation, and packaging stations where required.Inline operation as a complete bottling unit for large-format containersCompatible with standard conveyor interfaces for infeed and dischargeOptimized handling for 18.9L bottles with stable transfer between stationsSuitable for beverage production where large bottles are requiredMachine Condition & Maintenance HistoryThe line has been barely used, limited to trial run operation only. It is fully functional, ready for testing, and in production-ready mode. This minimal use profile provides a strong opportunity for those seeking a second hand, used bottling line with near-new wear characteristics.Condition: Barely used (trial run only)Status: Fully functional and ready for testingOperational readiness: Production-ready configurationOperational Performance & VersatilityPurpose-built for 18.9L bottles, the system provides reliable cycle execution and steady output. The six-head filling section balances throughput with filling control appropriate for large volumes. Pre-filling treatment via washing and disinfecting helps support product quality within beverage production and industrial packaging workflows.Consistent performance for large-format bottle fillingIntegrated pre-treatment (wash and disinfect) prior to fillingAutomated capping aligned with 18.9L bottle handlingSuitable for beverage production environments requiring large containers Podpfx Acsy Ai Hfo Ajrb

Condition: used, Fully automatic RATTUNDE line ACS100/2 integrating: · cutting, · brush deburring, · facing / chamfering, · 100% length control, · automatic robotic packing with double output system · and very large set of tooling. Prjdjyz Rvxopfx Ac Aob Designed for high-precision single or double cuts. One of the fastest tube cutting machine on the market. TECHNICAL DATA Cutting diameters: 10 - 100 mm Entry length: 12.000 mm Cutting length: 25* - 2.000 mm (*25 - 150 mm with special tooling) Performance: Up to 1.500 pieces/hour SCOPE OF SUPPLY 1. BM 8 bundle loading magazine in light construction 2. ACS 100/2 Cutting production system with piece counter 3. Brush deburring machine BDM 4. Chamfering machine CFM 5. Length measuring device Pi 6. Automatic stacking robot SRT 7. Safety fence with light barrier to secure the BM bundle loading magazine 8. Step conveyor SCB for the transport of pieces 9. Conveyor for test tubes 10. Complete set of tooling 11. Switch cabinet & control system for the complete line Performance: Up to 1.500 pieces/hour Cutting diameters: 10 - 100 mm Entry length: 12.000 mm Cutting length: 25 - 2.000 mm (25 - 150 mm with special tooling) Thickness: From 0,5 mm to solid

Condition: excellent (used), CNC Flexible Automatic through-feed DRILLING LINE Min/Max workpieces (panels) width (X axis) with PWX100: mm 250 / 3000 Min/Max workpieces (panels) thickness (Z axis) with PWX100: mm 12 / 60 Min/Max workpieces (panels) length-depth (Y axis) with PWX100: mm 100 /1200 (o 600+600) Prjdpfx Ajzxn N Ioc Ajb A) Loader (Bridge Frame) "MAHROS" Double Station, Mod. Brush CDL B) 1° Motorized Roller table "MAHROS" with 90° motorized belts (from longitudinal to transverse) C) Connection transfer, with tilter (180°, up-side-down) "MAHROS" Mod. Rib/C HS-C D) Gantry (Portal) CNC (Drilling) "MORBIDELLI" PowerFlex (PWX) S - N° 6 mobile consoles (workbenches) controlled by CN on the X-axis - N° 4 upper drilling units - N° 2 horizontal groups (1 R + 1 L) with 1 head each with 21 spindles (21 + 21 = total 42) E) 2° Roller conveyor "MAHROS" with 90° motorized belts (from longitudinal to transverse) F) Stacker (Bridge Frame) "MAHROS", double station Mod. Brush SDL, with "WANDRES" panel cleaner

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: 20082, type of input current: three-phase, total width: 2,000 mm, total length: 6,700 mm, input voltage: 400 V, input current: 10 A, 32 C – GERBER XLS-125-180-L Automatic Fabric Spreader – Industrial Spreading System Description For sale is a GERBER XLS-125-180-L automatic fabric spreading machine designed for high-volume textile and garment production. This industrial spreading system enables precise and efficient multi-layer fabric spreading directly onto a conveyor table. The motorized spreading carriage ensures consistent material handling, alignment, and production speed, making it suitable for demanding production environments. The machine is known as a reliable industry workhorse, capable of handling a wide range of materials from heavy denim to lightweight fabrics. The system has been operated as part of a fully integrated cutting line together with a Lectra Vectorfashion VT-FA-Q2-72 cutter (unit 35 C) and FINN-CONVEY V307 conveyor system (unit 30 C). This setup significantly improves production flow, reduces manual labor, and enables continuous high-volume operation. The machine has been used in a professional garment factory and was operational prior to factory shutdown. Recently serviced on 27.02.2026. Video available from operation (05.03.2026). The video material shows the GERBER spreading system in operation together with other cutting line equipment, including a Lectra Vectorfashion VT-FA-Q2-72 CNC cutter (unit 35 C) and a FINN-CONVEY V307 conveyor system (unit 30 C). Includes • GERBER XLS automatic spreading machine • Motorized spreading carriage • Roll holder system • Integrated touchscreen control panel • Fabric alignment and feeding system • Mounted rail system for table operation Technical Details • Manufacturer: Gerber Technology • Model: XLS-125-180-L • Year: 2009 • Serial number: 20082 • Max roll weight: 125 kg • Max roll diameter: approx. 600–650 mm • Machine weight: approx. 400 kg • Spreading width: up to 1800 mm • Speed: up to approx. 100 m/min (material dependent) • Voltage: 3 x 380–415 V • Frequency: 50/60 Hz • Current: approx. 10 A Pjdey Alciepfx Ac Aorb Key Features • Fully automated fabric spreading for reduced manual labor • Suitable for both rolled and folded fabrics • Precision tension control to prevent fabric distortion • Accurate edge alignment for material optimization • Touchscreen interface for easy programming and control • Integrated safety systems including emergency stop and sensors Production Advantages • High precision reduces material waste • Fast spreading significantly improves cutting room throughput • Consistent tension ensures dimensional stability of cut parts • Enables efficient multi-layer cutting preparation Maintenance & Reliability Gerber spreading systems are known for strong spare part availability and long service life. Condition Used industrial condition Fully operational prior to shutdown Recently serviced (27.02.2026) Video available from operation (05.03.2026) Typical signs of use from production environment Inspection possible prior to dismantling Sold as-is, where-is, without warranty Typical Applications • Automatic fabric spreading • Multi-layer cutting preparation • Denim and heavy fabric production • High-volume garment manufacturing • Cutting room operations Location Valga, Estonia Removal & Transport Buyer responsible for dismantling and transport Professional dismantling recommended due to system size

Year of construction: 2026, condition: new, functionality: fully functional, Boost your output with our industrial croquette machine, engineered for speed and reliability. This stainless steel croquette production line delivers up to 3,600 croquettes per hour, adjustable from 20 g to 60 g each. - Versatile 3‑in‑1 equipment: combines a 15 L electric stuffer, croquette forming machine, and industrial breading machine, perfect for croquettes, nuggets, meatballs, flamenquines, cachopos and more. - 100 % stainless steel (AISI304) construction, easy to dismantle and clean, meeting all hygiene standards. - Variable speed control: 9–20 m/min conveyor, with interchangeable nozzles (22 mm, 25 mm, 28 mm) to customize shape and size. Pedpfeww Uagjx Ac Aerb - High-efficiency production: consistent, professional results for your food processing equipment needs. Upgrade to this croquette production line and stand out in the food industry. Increase throughput, ensure top quality, and simplify cleaning—all in one machine!

Condition: used, Automatic frying line HOJA DRL1000 Technical specifications: - Frying time: 40–345 sec, - Maximum frying temperature: 240°C / 460°F, - Machine dimensions (L × W × H): 2000 × 2600 × 2200 mm, - Total weight: approx. 750 kg, - Outer pan diameter: approx. 1 m, - Usable frying width: approx. 285 mm (11.22″), Pedpfx Asxay I Sec Asrb - Shallow frying with oil level up to 5 mm (0.2″), - Cast iron, flat pan; flatness deviation not greater than ±0.1% of the diameter, - Frying time: from approx. 40 to 345 s, - Maximum heating power: approx. 28 kW, - 2 temperature sensors per pan. Included: exhaust hood, dispenser, spray system, oil filter.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, very few operating hours very good condition Consisting of: Quickbinder adhesive binding machine with PUR with remote diagnostics with cooling and drying section with three-knife trimming system DGR D09 with compressor Base machine for solo or inline operation for connection with a three-knife trimmer Equipment - rotary feeder, integrated vacuum technology Winjector R - scoring station with split scoring tools for 2 and 4 grooves - feeder and pressing station including 1 set of standard pressing strips - ejector lift with gripper system for lightweight products - stack delivery (standing delivery) - industrial PC with TFT color display and touch screen function Podpfxeimqucj Ac Aorb - graphical user interface Navigator E - motorized thickness adjustment * PUR spine gluing unit, mobile - Europe for the production of an adhesive-bound brochure with 1 application roller with heated spinner with automatic doctor blade control with specially coated glue tank with integrated PUR bulk melting system * Cooling and drying section * Hotmelt side gluing unit, mounted on the spine gluing unit * Three-knife trimmer D09 – System DGR Base machine for three-side trimming of adhesive-bound products in offline and inline operation - Offline or inline operation possible * Compressor system 1800 dm³/min.

Condition: new, INTEGRATED MODULAR SOLUTIONS FOR AUTOMATED CORRECTION BOX PRODUCTION Fully automated production lines for corrugated cardboard boxes Zemat Technology Group offers state-of-the-art, flexible, and fully automated production lines for corrugated cardboard boxes, engineered for the manufacturing of custom cartons. Key Benefits: - Fully customizable – Configurable to specific production requirements - Industry 4.0 ready – Integrated with JQS Job Queue System - High efficiency – Reduces production time and costs - Quick setup change – Less than 60 seconds setup time - Intelligent automation – Touchscreen HMI control with remote diagnostics via VPN Applications: Prsdswvifnepfx Ac Aob - Shipping cartons - Custom pre-printed packaging - Special corrugated board boxes Why choose BOXMAT production lines? - Complete automation – From feeding to stacking - No special tools required – Fast setup & reduced downtime - Scalable & modular – Expand your production capacity as needed Increase your efficiency and streamline your workflow with the integrated modular solutions from Zemat Technology Group for the automatic production of corrugated cartons. Our cutting-edge production lines are designed for manufacturers demanding flexibility, precision, and automation.

Year of construction: 2007, condition: like new (used), FICEP 601 DZB CNC DRILLING LINE with 4 way SCRIBING FACILITY I-Beams (without camber): Web height minimum 60mm maximum 610mm. Flange width minimum 30mm maximum 310mm. Pjdpfoh N Taaox Ac Asrb UNP Channels (web downwards): • Web height minimum 60mm maximum 610mm. Flange width minimum 30mm maximum 300mm. Angles • Flange height (unequal flanges as well) minimum 50 x 50 x 5mm maximum 250 x 250 x 40mm. Flats • Width minimum 100nn maximum 610mm. Square tubes • Size minimum 60 x 60mm maximum 300 x 300mm. Rectangular tubes • Size minimum 60 x 30mm maximum 600 x 300mm. All beams • Maximum thickness that can be drilled 50mm. Maximum length (infeed) 12000mm.